Set time out for single webservice in NWDS 2004s

hai,
i created webservices for session bean.created webservices are consumed by webdynpro client.
when the webdynpro client consuming it.if the response takes more than 60 sec the webservices are timed out so i want to set the time out for my webservice.
how can i set the time out (more 60 sec)for my webserive(for one service)?
thanks in advance.
Edited by: lakshman balanagu on Jun 24, 2008 11:20 AM

Hi
Try out this thing: I am not sure as I have not done this.
Go to this link: http://<server>:<j2ee port>/nwa --> System Management --> Overview --> Configuration
Application Resouce ( Select your resource from the list)
Check for "Connection Pooling".
Here you can check different options.

Similar Messages

Seelct query time out for single region

Hi ,
I am currently facing a problem with a report .The problem is in a select query.The report runs successfully when it is run for only more than 1 state but when it is run for single state then it times out.The select query is as given below.
SELECT avbeln eposnr bvbtyp aerdat akunnr ckunnr d~regio
           ewerks aernam dname1 afaksk b~cmgst
           INTO TABLE t_block
           FROM vbak AS a
           INNER JOIN vbuk AS b
           ON bvbeln = avbeln
           INNER JOIN vbpa AS c
           ON cvbeln = avbeln
           INNER JOIN kna1 AS d
          ON dkunnr = akunnr
           ON dkunnr = ckunnr
           INNER JOIN vbap AS e
           ON evbeln = avbeln
               WHERE a~faksk IN faksk
                 AND a~vkorg = vkorg
                 AND a~vtweg IN vtweg
                 AND a~spart IN spart
                 AND a~vkbur IN vkbur
                 AND a~vkgrp IN vkgrp
                 AND a~kunnr IN kunnr
                 AND a~ernam IN ernam
                 AND a~erdat IN erdat
                 AND a~vbeln IN vbeln
                 AND a~vbtyp IN vbtyp
                 AND b~spstg IN ('A','B','C')
                 AND ( b~fsstk NE space
                      OR b~cmgst NE space )
                 AND b~abstk NE 'C'
                 AND c~kunnr IN s_kunwe
                 AND c~parvw = 'WE'
                 AND d~regio IN s_regio.
Please let me know if you require any more information.
s_regio is the select option for state.Also I feel that for KUNNR the On conditon might cause soem problem becasue it does not involve key fields.
thanks,

hi ds,
separate the select in several selects. The inner join is not always the best solution.
take
data : ivbak type table of vbak,
   field symbols : <xvbak>
select +++ into corresponding fields of table ivbuk
          from vbuk
          where
select +++ into corresponding fields of table ivbak
         form vbak
         for all entries in ivbuk
         where vbeln eq ivbuk-vbeln ...
select ...
if you want to have one internal table then do it with a loop.
loop at ivbak assigning <xvbak>
read table ikna1 with key kunnr = <xvbak>-kunnr.
loop at ivbap whee vbeln = <xvbak>-vbeln.
itab..= vbak..
? move corresponding ?
append itab.
endloop.
endloop.
that will not cause a time-out.
if you want a verry quick program - use tables without heading lines and field symbols with loops with assigning.
It is more to write but the effect is verry good.
Hans
Hans

Setting time outs for a secure connection

I am researching on setting up a secure application incorporating two authentication
mechanisms:
a) Mutual Authentication to verify certificates
b) RDBMS Security Realm to validate username/password combinations
I desire a time out to take place after an hour of dormant time passes on the
connection forcing the user to re-authenticate. Any suggestions on how to configure
such behavior? I have been digging around the documentation for a while now and
I have not found anything specific controlling this time out duration.
Thanks for the help.
-cb

http://www.bulletsandbones.com/GB/GBFAQ.html#exportexactlength

Is it possible to increase user exit time out for a partcular user

Dear Sir/madam,
Is it possible to increase the User Time Out for a Particular user ?
We do it through RZ10 and as per I know when it is changed, it is effected to all the users.
Pls advice.
Thanks,
Pranab

Hi Pranab,
Not possible for a single user.
Regards
Ashok Dalai

Can the time out for loading a page be extended for busy sites?

(Error:)
Problem loading page
The connection has timed out
The server at xxx.xxx is taking too long to respond.
* The site could be temporarily unavailable or too busy. Try again in a few moments.
Question: Is there a way to extend the time out for sites which are known to be busy?

This issue appears under two different Mozzila "Questions". Both appear to have the same OUTDATED, INEFFECTIVE ANSWERS. A lot of us are on WIN7 now and still have erratic network speeds due to cable multiplexing -- but have been trained to leave the registry alone. Has not anyone solved this problem -- other than going notoriously unreliable FIOS ??

Set multiple passwords for single PDF

Hi All,
Do it is possible to set multiple passwords for single PDF i.e) a single PDF can be accessed using predefined passwords. It would be great if any one could can help me .
Thanks
Augustine

Thank you.
Do you mean different IDs can be used for a single PDF and can make the PDF protected.
Regards
Augustine

Q: Set time restriction for UPK assessments

in knowledge Center there is way of setting a start and end date for an assessment, but we would like to restrict it by time as well.
Is it possible to set time restriction for an assessment, say from starting the assessment the user have only 1 hour to complete. I know that Knowledge center keeps track of the time spent on a specific assessment when I run reports to tracking of time is already available.
Experts - your help is kindly required

Hi Babu,
Based on my knowledge, Exchange has no built-in function to restrict some users sending their messages in a period of time. Your understanding will be appreciated.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Amy Wang
TechNet Community Support

How do i set time limits for my children on an ipad and ipod

how I set parental restrictions

That's not a feature of the iPod or iPad. Or the iPhone for that matter. The most effective way is to take it away from them when they're not supposed to be using it.
If you don't want to do that, investigate the capabilities of your router to set time limits for specific devices.

How do I set time limits for my iphone?

You know how there are parental controls on the macs in the settings. In there you can set up time limits of how long you can use the computer for but I can't find it on the iphone where you can set time limits for use. I looked at the restrictions sections but I don't see anything on setting time limit. How could I set time limits for use on my phone? I go on my phone too much and I really have to set restrictions to limit my time on it.

There are apps you can download i believe to do this.
https://itunes.apple.com/us/app/parental-timelock-time-limit/id689577280?mt=8
for example

Transaction time out for an single ejb

Hi,
I have one ejb which need to run for long time.
Did a quick search on the forum and find out that you can modify data-source.xml and server.xml to increase the time out period.
But this is a "global" setting which will affect all the ejbs in the application.
Is there a setting where only one ejb's transaction time-out can be specified?
Thanks in advance!
Young

What is the exact error code? I.e. the ORA-nnnn error code.
It is not possible to diagnose a problem if the actual problem is not known. Responders are guessing at what the problem is and offering solutions.. and these could be very far of the mark.

How can I set the query time out for SQVI?

Hi,
I want to setup query timeout for a particular user so that if his query (created in SQVI) takes more then say 10 minutes, it automatically times out and system resources are freed up.
How can I do this for a specific user? Also in case I cant do it for a specific user how can I do it for all users?
Thanks for reading

Hello Srikrishna,
The SQVI is a dialog transaction and henc its governed by your system's rdisp/max_wprun_time parameter.
A dialog work process has a run-time limit that prevents users from interactively running especially long reports. By default, the system terminates any dialog work process in a transaction that exceeds 300 seconds. Although the value of the limit can be changed (in the system profile parameter rdisp/max_wprun_time), that limit is always in effect for dialog work processes. No such limit applies to background work processes.
Regards,
Siddhesh

Session Time Out For UNLOGGED IN USER During Search -pls help SIR!

Hi,
The problem lies in searchresultscontroller.java/searchcontroller.java file under search/web/handler of an application that supports educational note sharing.
The problem is that -
When I search with query strings in different fields(as you will find in the above mentioned java files)..the keywords in resourcedto and get some files as search results.
Then I click on one of the file from within the search result and visit the file.
Here if I m logged in as an user, and the session time out is set to 1 minute in the web.xml file of the web folder not the admin folder then when I hit the BACK TO SEARCH button it easily goes back to the previous search result page along with the queries string that I had input previously.
The problem is that when I m NOT LOGGED in as an user, and I've performed a search with queries and other dropdowns in the search panel, I get the search result page, I visit the file by clicking on one of them but when I hit the BACK TO SEARCH button I don't see the previous search result page from where I had navigated to view the file.
Please suggest on what changes shall I make in the code so that even if I m not logged in as an user, I get back to the search result page on hitting the BACK TO SEARCH button from the file view page.Sir I m herein pasting the code of the searchresultscontroller.java file, but please feel free to ask for anyother file whose code you might want to see.SEARCHRESULTSCONTROLLER.JAVA FILE CONTENT-
package com.mgh.sps.search.web.handler;
import java.util.Map;
import java.util.regex.Pattern;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
import org.apache.log4j.Logger;
import org.springframework.validation.BindException;
import org.springframework.validation.Errors;
import org.springframework.web.servlet.ModelAndView;
import org.springframework.web.servlet.mvc.SimpleFormController;
import com.mgh.sps.search.business.facade.Search;
import com.mgh.sps.common.dto.ResourceDTO;
import com.mgh.sps.common.util.SessionAttributeKey;
import com.mgh.sps.common.util.SessionManager;
import com.mgh.sps.fileusage.web.constants.FileUsageWebConstants;
public class SearchResultsController extends SimpleFormController {
* SearchResults Controller
* @author Muralikrishna.s
* @Codedondate DD-MM-YY=26-07-07
* @Usecase/s associated =UC504
private static final Logger logger = Logger
.getLogger(SearchResultsController.class.getName());
private final static String REG_EXP = "^[A-Za-z0-9]*$";
private final static Pattern EMAIL_PATTERN_REG = Pattern.compile(REG_EXP);
* Spring framework method used to hold reference data
* @param request
* HttpServletRequest
* @param command
* Object
* @param arg2
* Errors
* @return Map
* @throws Exception
@Override
protected Map referenceData(HttpServletRequest request, Object command,
Errors errors) throws Exception {
logger.debug("SearchResultsController.referenceData() method entered:"
+ request + "," + command + "," + errors);
SessionManager.setSessionAttribute(SessionAttributeKey.tabIndex,
FileUsageWebConstants.TAB_SEARCH, request);
Search search = (Search) super.getWebApplicationContext().getBean(
"searchfacade");
ResourceDTO resourceDto = (ResourceDTO) command;
String[] allValues = new String[7];
if (null != (String[]) SessionManager.getSessionAttribute(
SessionAttributeKey.allValues, request)) {
allValues = (String[]) SessionManager.getSessionAttribute(
SessionAttributeKey.allValues, request);
resourceDto.setKeywords(allValues[0]);
resourceDto.setCountry(allValues[1]);
resourceDto.setUniversityName(allValues[2]);
resourceDto.setSubjectArea(allValues[3]);
resourceDto.setQualification(allValues[4]);
resourceDto.setYearLevel(allValues[5]);
resourceDto.setSpecificType(allValues[6]);
logger.debug("%%%%%%%%%%%%%%%%%qualification%%%%%%%%%%%%%%%"
+ resourceDto.getQualification());
String flag = (String) request.getParameter("id");
resourceDto.setFlag(flag);
logger.debug("SearchResultsController.referenceData() method exited:");
return search.retrieveReferenceData(resourceDto);
* Spring framework method used to hold OnSubmit
* @param request
* HttpServletRequest
* @param response
* HttpServletResponse
* @param command
* Object
* @param arg3
* BindException
* @return ModelAndView
* @throws Exception
@Override
protected ModelAndView onSubmit(HttpServletRequest request,
HttpServletResponse response, Object command, BindException errors)
throws Exception {
SessionManager.cleanup(request);
logger.debug("SearchResultsController.onSubmit() method entered:"
+ request + "," + command + "," + response + "," + errors);
Search search = (Search) super.getWebApplicationContext().getBean(
"searchfacade");
Map dynamic = (Map) getServletContext().getAttribute("config");
ResourceDTO resourceDto = (ResourceDTO) command;
SessionManager.removeSessionAttribute(SessionAttributeKey.allValues,
request);
//changed by sreelatha on sep21
//resourceDto.setKeywords(request.getParameter("keywords"));
//String key = request.getParameter("keywords");
//logger.debug("&&&&&&&&&&&&& key &&&&&&&&&&&&" + key);
String keywords = (request.getParameter("keywords"));
if(null!=keywords) {
keywords = keywords.trim();
resourceDto.setKeywords(keywords);
// changes end
resourceDto.setUniversityName(request.getParameter("universityName"));
resourceDto.setSubjectArea(request.getParameter("subjectArea"));
resourceDto.setCountry(request.getParameter("country"));
resourceDto.setQualification(request.getParameter("qualification"));
resourceDto.setYearLevel(request.getParameter("yearLevel"));
resourceDto.setSpecificType(request.getParameter("specificType"));
String[] allValues = new String[7];
//changed by sreelatha on sep21
//allValues[0] = request.getParameter("keywords");
allValues[0] = resourceDto.getKeywords();
//changes end
allValues[1] = request.getParameter("country");
allValues[2] = request.getParameter("universityName");
allValues[3] = request.getParameter("subjectArea");
allValues[4] = request.getParameter("qualification");
allValues[5] = request.getParameter("yearLevel");
allValues[6] = request.getParameter("specificType");
SessionManager.setSessionAttribute(SessionAttributeKey.allValues,
allValues, request);
if(null!=keywords) {
keywords = keywords.trim();
String words="";
for(int i=0;i<keywords.length();i++) {
String key=String.valueOf(keywords.charAt(i));
if(key.contains("*")) {
key = key.replace("*"," ");
} else if(key.contains("?")) {
key = key.replace("?"," ");
} else if(key.contains("[")) {
key = key.replace("["," ");
} else if(key.contains("{")) {
key = key.replace("{"," ");
} else if(key.contains("(")) {
key = key.replace("("," ");
} else if(key.contains(")")) {
key = key.replace(")"," ");
} else if(key.contains("+")) {
key = key.replace("+"," ");
} else if(key.contains("
key = key.replace("
} else if(key.contains(" ")) {
key = key.replace(" "," ");
} else if(key.contains("_")) {
key = key.replace("","");
} else if(!EMAIL_PATTERN_REG.matcher(key).matches()) {
key = key.replaceAll(key," ");
words = words + key;
keywords = words;
resourceDto.setKeywords(keywords);
SessionManager.setSessionAttribute(SessionAttributeKey.test, search.setInputValues(resourceDto, dynamic), request);
String name = (String) SessionManager.getSessionAttribute(SessionAttributeKey.tempName, request);
String flag1 = request.getParameter("id");
String status="";
if (flag1 !=null && flag1.equals("loggedInUser"))
if(name==null)
return new ModelAndView();
if (flag1 !=null && flag1.equals("loggedInUser")){
status = "redirect:SearchResults.htm?id=loggedInUser";
}else if(flag1 !=null && flag1.equals("nonLoggedInUser"))
status = "redirect:SearchResultsnlu.htm?id=nonLoggedInUser";
super.setSuccessView(status);
ModelAndView mav = new ModelAndView(super.getSuccessView());
logger.debug("SearchResultsController.onSubmit() method exited:");
return mav;
}

Cross-posted in many forums. Don't answer this one.

Session Time Out For UNLOGGED USER During Search -pls help

Hi,
The problem lies in searchresultscontroller.java/searchcontroller.java file under search/web/handler of an application that supports educational note sharing.
The problem is that -
When I search with query strings in different fields(as you will find in the above mentioned java files)..the keywords in resourcedto and get some files as search results.
Then I click on one of the file from within the search result and visit the file.
Here if I m logged in as an user, and the session time out is set to 1 minute in the web.xml file of the web folder not the admin folder then when I hit the BACK TO SEARCH button it easily goes back to the previous search result page along with the queries string that I had input previously.
The problem is that when I m NOT LOGGED in as an user, and I've performed a search with queries and other dropdowns in the search panel, I get the search result page, I visit the file by clicking on one of them but when I hit the BACK TO SEARCH button I don't see the previous search result page from where I had navigated to view the file.
Please suggest on what changes shall I make in the code so that even if I m not logged in as an user, I get back to the search result page on hitting the BACK TO SEARCH button from the file view page.Sir I m herein pasting the code of the searchresultscontroller.java file, but please feel free to ask for anyother file whose code you might want to see.
SEARCHRESULTSCONTROLLER.JAVA FILE CONTENT-
package com.mgh.sps.search.web.handler;
import java.util.Map;
import java.util.regex.Pattern;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
import org.apache.log4j.Logger;
import org.springframework.validation.BindException;
import org.springframework.validation.Errors;
import org.springframework.web.servlet.ModelAndView;
import org.springframework.web.servlet.mvc.SimpleFormController;
import com.mgh.sps.search.business.facade.Search;
import com.mgh.sps.common.dto.ResourceDTO;
import com.mgh.sps.common.util.SessionAttributeKey;
import com.mgh.sps.common.util.SessionManager;
import com.mgh.sps.fileusage.web.constants.FileUsageWebConstants;
public class SearchResultsController extends SimpleFormController {
     * SearchResults Controller
     * @author Muralikrishna.s
     * @Codedondate DD-MM-YY=26-07-07
     * @Usecase/s associated =UC504
     private static final Logger logger = Logger
               .getLogger(SearchResultsController.class.getName());
     private final static String REG_EXP = "^[A-Za-z0-9]*$";
     private final static Pattern EMAIL_PATTERN_REG = Pattern.compile(REG_EXP);
     * Spring framework method used to hold reference data
     * @param request
     * HttpServletRequest
     * @param command
     * Object
     * @param arg2
     * Errors
     * @return Map
     * @throws Exception
     @Override
     protected Map referenceData(HttpServletRequest request, Object command,
               Errors errors) throws Exception {
          logger.debug("SearchResultsController.referenceData() method entered:"
                    + request + "," + command + "," + errors);
          SessionManager.setSessionAttribute(SessionAttributeKey.tabIndex,
                    FileUsageWebConstants.TAB_SEARCH, request);
          Search search = (Search) super.getWebApplicationContext().getBean(
                    "searchfacade");
          ResourceDTO resourceDto = (ResourceDTO) command;
          String[] allValues = new String[7];
          if (null != (String[]) SessionManager.getSessionAttribute(
                    SessionAttributeKey.allValues, request)) {
               allValues = (String[]) SessionManager.getSessionAttribute(
                         SessionAttributeKey.allValues, request);
               resourceDto.setKeywords(allValues[0]);
               resourceDto.setCountry(allValues[1]);
               resourceDto.setUniversityName(allValues[2]);
               resourceDto.setSubjectArea(allValues[3]);
               resourceDto.setQualification(allValues[4]);
               resourceDto.setYearLevel(allValues[5]);
               resourceDto.setSpecificType(allValues[6]);
          logger.debug("%%%%%%%%%%%%%%%%%qualification%%%%%%%%%%%%%%%"
                    + resourceDto.getQualification());
          String flag = (String) request.getParameter("id");
          resourceDto.setFlag(flag);
          logger.debug("SearchResultsController.referenceData() method exited:");
          return search.retrieveReferenceData(resourceDto);
     * Spring framework method used to hold OnSubmit
     * @param request
     * HttpServletRequest
     * @param response
     * HttpServletResponse
     * @param command
     * Object
     * @param arg3
     * BindException
     * @return ModelAndView
     * @throws Exception
     @Override
     protected ModelAndView onSubmit(HttpServletRequest request,
               HttpServletResponse response, Object command, BindException errors)
               throws Exception {
          SessionManager.cleanup(request);
          logger.debug("SearchResultsController.onSubmit() method entered:"
                    + request + "," + command + "," + response + "," + errors);
          Search search = (Search) super.getWebApplicationContext().getBean(
                    "searchfacade");
          Map dynamic = (Map) getServletContext().getAttribute("config");
          ResourceDTO resourceDto = (ResourceDTO) command;
          SessionManager.removeSessionAttribute(SessionAttributeKey.allValues,
                    request);
          //changed by sreelatha on sep21
          //resourceDto.setKeywords(request.getParameter("keywords"));
          //String key = request.getParameter("keywords");
          //logger.debug("&&&&&&&&&&&&& key &&&&&&&&&&&&" + key);
          String keywords = (request.getParameter("keywords"));
          if(null!=keywords) {
               keywords = keywords.trim();
          resourceDto.setKeywords(keywords);
//          changes end
          resourceDto.setUniversityName(request.getParameter("universityName"));
          resourceDto.setSubjectArea(request.getParameter("subjectArea"));
          resourceDto.setCountry(request.getParameter("country"));
          resourceDto.setQualification(request.getParameter("qualification"));
          resourceDto.setYearLevel(request.getParameter("yearLevel"));
          resourceDto.setSpecificType(request.getParameter("specificType"));
          String[] allValues = new String[7];
          //changed by sreelatha on sep21
          //allValues[0] = request.getParameter("keywords");
          allValues[0] = resourceDto.getKeywords();
          //changes end
          allValues[1] = request.getParameter("country");
          allValues[2] = request.getParameter("universityName");
          allValues[3] = request.getParameter("subjectArea");
          allValues[4] = request.getParameter("qualification");
          allValues[5] = request.getParameter("yearLevel");
          allValues[6] = request.getParameter("specificType");
          SessionManager.setSessionAttribute(SessionAttributeKey.allValues,
                    allValues, request);
               if(null!=keywords) {
               keywords = keywords.trim();
               String words="";
               for(int i=0;i<keywords.length();i++) {
                    String key=String.valueOf(keywords.charAt(i));
                    if(key.contains("*")) {
                              key = key.replace("*"," ");
                         } else if(key.contains("?")) {
                              key = key.replace("?"," ");
                         } else if(key.contains("[")) {
                              key = key.replace("["," ");
                         } else if(key.contains("{")) {
                              key = key.replace("{"," ");
                         } else if(key.contains("(")) {
                              key = key.replace("("," ");
                         } else if(key.contains(")")) {
                              key = key.replace(")"," ");
                         } else if(key.contains("+")) {
                              key = key.replace("+"," ");
                         } else if(key.contains("\\")) {
                              key = key.replace("\\"," ");
                         } else if(key.contains(" ")) {
                              key = key.replace(" "," ");
                         } else if(key.contains("_")) {
                              key = key.replace("_","_");
                         } else if(!EMAIL_PATTERN_REG.matcher(key).matches()) {
                              key = key.replaceAll(key," ");
                    words = words + key;
               keywords = words;
               resourceDto.setKeywords(keywords);
          SessionManager.setSessionAttribute(SessionAttributeKey.test, search.setInputValues(resourceDto, dynamic), request);
          String name = (String) SessionManager.getSessionAttribute(SessionAttributeKey.tempName, request);
          String flag1 = request.getParameter("id");
          String status="";
          if (flag1 !=null && flag1.equals("loggedInUser"))
          if(name==null)
                    return new ModelAndView();
          if (flag1 !=null && flag1.equals("loggedInUser")){
               status = "redirect:SearchResults.htm?id=loggedInUser";
          }else if(flag1 !=null && flag1.equals("nonLoggedInUser"))
               status = "redirect:SearchResultsnlu.htm?id=nonLoggedInUser";
          super.setSuccessView(status);
          ModelAndView mav = new ModelAndView(super.getSuccessView());
          logger.debug("SearchResultsController.onSubmit() method exited:");
          return mav;
}

Cross-posted in many forums. Don't answer this one.

Time Out for a syncronus BPEL process

Hi All,
Need your help with regards to the following:
From a parent BPEL process we need to invoke a synchronous BPEL Process .This(child) could take anything between 20-30 seconds for processing a request.
Now the requirement is to time out the parent BPEL process if the BPEL process it is calling takes more than 25 seconds for processing a request.
If( time taken to get from partner process >25 sec)
time out
Else
Move along with the rest of the process.
Approaches considered:
1) Pick activity :
Fallout: the pick activity would work only when you are calling a asynchronous BPEL process.
2) Having the invoke activity in a scope and adding an on Alarm branch for the scope.
Fallout: The BPEL process manager executes all the other activities even after exceeding the maximum time the process is set for timing out.
That is if we consider the below scenario
If( time taken to get from partner process >25 sec)
time out
Else
move along with the rest of the process.
Instead of executing the if block( onAlarm) it is executing the else block.
Request you to suggests approaches to suffice this requirement.

Hi Sai Madalli,
An approach to it, would be use the syncMaxWaitTime with time that you need, its a configuration per domain.
http://download-west.oracle.com/docs/cd/B31017_01/integrate.1013/b28981/events.htm#BABGGADB
http://download-east.oracle.com/docs/cd/B31017_01/integrate.1013/b28981/app_trblshoot.htm
Regards

Time out for Client Proxy

Hi All,
I have a scenario, where ECC sends a request to a BPM synchronously. The BPM can sends a response back immediately, if it is a success, else sends the response back to ECC after 2 minutes, if there is a communication failure.
But for the second case, ECC is throwing HTTP 500 error within 1 minute.
We tried to set up the parameter icm/keep_alive_timeout to 180 in ECC side, but it is going into error in exact 60 seconds.
Could you please suggest a solution?
Regards,
SS

yes , It is 0. For the success, I am finding the desired result. I checked the work flow monitor. The exception is triggered for communication failure, and the deadline branch is executed. As the connection is terminated by that time, the message is not being able to sent back to ECC.
Do I need to tune the same parameter for PI? Because I am getting HTTP error, it gives me a feeling that time out at ICM level.
Regards,
SS
Edited by: Subhendu Sahu on May 9, 2011 3:09 PM

Set time out for single webservice in NWDS 2004s

Similar Messages

Maybe you are looking for