Set tolerance limts in invoice Verifiction

Hi All,
Please tell me the purpose of tolerance limts key "DQ" in invoice verification.in which case we use this key.Please explain me with the example.
Regards
Pavan

As per standard SAP help:
DQ: Exceed amount: quantity variance
If a goods receipt has been defined for an order item and a goods receipt has already been posted, the system multiplies the net order price by (quantity invoiced - (total quantity delivered - total quantity invoiced)).
If no goods receipt has been defined, the system multiplies the net order price by (quantity invoiced - (quantity ordered - total quantity invoiced)).
The system compares the outcome with the absolute upper and lower limits defined.
This allows relatively high quantity variances for invoice items for small amounts, but only small quantity variances for invoice items for larger amounts.
You can also configure percentage limits for the quantity variance check. In this case, the system calculates the percentage variance from the expected quantity, irrespective of the order price, and compares the outcome with the percentage limits configured.
The system also carries out a quantity variance check for planned delivery costs.
regards,
Indranil

Similar Messages

Set tolerance limits in invoice block

We have the following tolerances:
                                                                                Lower limit                                     Upper limit
                                                                               Absolute     Percentage     Absolute     Percentage
BD     Formación automátic.difer.pequeñas                                    0.05
BR     Desviación porcen.CPP (RF ant.a EM)                                                           5
BW     Desviación porcen.CPP (EM ant.a RF)                                                          5
DQ     Sobrepasar importe desviación cantidad               25     5
KW     Desviación del valor condición                                                        25     5
PP     Desviación del precio                                                           25     5
PS     Desviación del precio estimado                                            300     10
We would like to avoid this:
1- User creates purchase order with price 1 u20AC por example
2- Goods receipt is made with 1 u20AC
3- User modifies purchase order´s price to 100 u20AC
4- Invoice is stored with 100 u20AC.
I would like to block invoices in which purchase price and invoice price
are the same but goods receipt´s price is very-very different.
How should I set the values? Which one?
Thanks in advance.

Hello,
Set Tolerence limits for Invoice verification in OMR6 Tcode.
If Invoice price is more than tolerence limit, then invoice will go to block.
Regards
Mahesh Naik.

Set tolerance for Invoice confirmation

Dear Experts,
We are using SRM 550 , Classic Scenario
When we make the invoice verification process it allowed only the order price,
When I change the price to lower value we got Error Message :
Average price too low: below tolerance limit of 0.00 and ILS (Item 1)
I saw in IMG that the following errors message are set by Item
PRICE TOLERANCE     BBP_IV     069
PRICE TOLERANCE     BBP_IV     071
Now we would like to set the Upper and Lower tolerance for the Invoice ,
we set in IMG:
spro > SRM > Enterprise Buyer > Cross application basic settings > set tolerance checks.
We have set a new Tolerance Group- new entry ( it was empty)
But Tolerance Key we can not find the one for the Invoice
We have only this keys:
CF     Document Tolerances for GR
DA     VALUE OVERRUN
DQ     OVERRUN QTY IN CURRENCY AMT
LA     AMOUNT BLANKET PURCHASE ORDER
LD     TIME OVERRUN BLANKET PO
PM     OVERRUN QTY IN CRCY AMT (PO)
PP     PRICE DEVIATION
PR     PRICE VARIANCE (PO)
PZ     TIME OVERRUN (PO)
TX     TAXES (INV)
Which one is for the Invoice Verification tolerances?
Please advise where and how can we set it ?
Regards,
Moshe

Hi
PP is the tolerance key required by you.
PP: Price variance (value variance from expected value)
You only use this tolerance for invoice entry.
The variance from the expected value is checked here, based on the preceding document (purchase order price or confirmation value).
The system determines by how much each invoice item varies from the product of quantity invoiced multiplied by the order price. It then compares the variance with the upper and lower limits defined (absolute limits and percentage limits).
PR is for deviations while creating Confirmations.
Make sure you enter the tolerance key in vendor master too.
Regards
Virender Singh

MIRO- INVOICE BLOCK-Set tolerance limit

Dear All,
We configure tolerance limits for each tolerance key in IMG-Invoice block>set tolerance limits.
What is meaning of absolute upper and lower limit in tolerance key. And how it is different from upper and lower limits
I have read the details of each and every tolerance key for example AN, AP, BD, BR, BW, DQ, DW, KW, LA, LD, PP, PS, ST, VP from sap help, but I am not able to understand properly and remember.
Especially DQ- (the line that is Underlined and in bold letters)
If a goods receipt has been defined for an order item and a goods receipt has already been posted, the system multiplies the net order price by (quantity invoiced - (total quantity delivered - total quantity invoiced)).
If no goods receipt has been defined, the system multiplies the net order price by (quantity invoiced - (quantity ordered - total quantity invoiced)).
The system compares the outcome with the absolute upper and lower limits defined.
This allows relatively high quantity variances for invoice items for small amounts, but only small quantity variances for invoice items for larger amounts.
You can also configure percentage limits for the quantity variance check. In this case, the system calculates the percentage variance from the expected quantity, irrespective of the order price, and compares the outcome with the percentage limits configured.
The system also carries out a quantity variance check for planned delivery costs.
Can anybody spare time to explain me in the laymen language ALL these keys so that I can remember and get the meaning of these keys.
thanks in advance
regards

Please use the Posting Key BD, with no limits there by restricting any value differences

Tolerance limits in Invoice Varification

Hi All
In Std SAP how to set the tolerance limits for Invoice Varification.
On what are all different parameters can i set these tolerence limits ?
That is in MIRO we do enter different values at Header level( Amout in basic data & Unplanned delivery cost) and at item level (Amount in PO reference, G/L a/c ,Material tabs)
Is it possible to set the toleremce limits for each of the above said values?
Pls advise..
With Regds

Hi BSA
U can set tolerance limit in customization for following
Amount for item without order reference
Amount for item with order reference
Form small differences automatically
Percentage OPUn variance (IR before GR)
Percentage OPUn variance (GR before IR)
Exceed amount: quantity variance
Quantity variance when GR qty = zero
Var. from condition value
Amount of blanket purchase order
Blanket PO time limit exceeded
Price variance
Price variance: estimated price
Date variance (value x days)
Moving average price variance
Path
Spro>MM>LIV>Invoice Block>Set Tolerance Limits
Vishal...

Tolerance limit for invoicing

I have found the node for setting toelrance limits . It is under MM-LIV-Invoice Block- Set tolerance. However the requirement is that we should generate warning message if the variance exceeds 10% per line item or if it exceeds $500 for entire invoice. Also this tolerance should only be in the form of warning message and should not block the invoice for payment. Please guide on this issue.

Hi
as you said you should use customizing in transaction OMR6.
The price variance to use is PP
so if you maintain absolute 500 (if your local currency is USD if not calculate 500 usd in your local currency ) and 10%
Then the system will block all invoice automatically higher than 10% up to 500 USD and create a warning
The blocked invoices you would see in transaction MRBR which is extremly helpful, from there you can release (unblock your invoices)
Maybe you are able with MRBR to create a job that manually releases daily each invoices automatically which i actually do not recommend.
Hope i could help
cheers
Tim

Tolerance Key in Invoice Blocking.

Hi All,
Can we create the new Tolerance Keys in the Invoice Blocking. Currently we have 14 T.Keys(AN, AP, BD, BR, BW.. Etc). Tolerance Limit Settings : Tcode - OMR6
Path- Invoice Block->Set Tolerance Limits
Please advice.
Thanks
Santosh

Hi,
please refer the following links..
Upon Posting Invoice, Invoice Block not Appeared for Tolerance Key PP
Invoice verification config???
Payment Blocks
Regards,
Udaya.
Edited by: udayareddy on Oct 12, 2011 4:57 PM

Regarding Tolerance Keys for Invoice Block For Payment in MIRO

Hi all,
In customizing, I have defined Tolerance Keys for Invoice Block for Payment. I have defined all tolerance keys for my company code ...... with Absolute as well as Percentage Limits. But whenever I am doing MIRO & testing for my Block Codes effectiveness, i am finding that everytime my Invoice gets Blocked by Tolerance Key PP(Price Variance) or by date......but not by any other like BD, BW, KW etc. Can anyone help me as how I should check for this. I even tried to study the documentation part available in customizing, but was unable to understand the term like Order Price Quantity units.......Can anyone help me in understanding this thing ........
Regards.....

Hi Ganesh,
below is the user exit where you can check the tolarance and put the Block according to the your requirment.
User Exit name - MM08R002 -User exit for tolerance checks
in the above user exit you have to use the below Function exit.
1) EXIT_SAPLMRMC_001
2) EXIT_SAPLMRMP_001
we implemented the above user exit to put the payment block based on the checks.
You can find the documentation of the above exit in the system.
Thanks
Naresh

Problem in Set Check for Duplicate Invoices

Hi,
I have did all the required setting s for check duplicate invoice , but when i do miro , its not giving any error or warning msge.. i did all the config as per blw link..
FYI- in migo, i have entered the 3434 as a invoice ref # in delveriy note column and while doing miro , i have entered 3434 in ref column and give the 3434 as a dlvery note # in item tab .. but its not giving any error?
Pls guide, where the mistake has gone wrongly??
Problem in Set Check for Duplicate Invoices
Edited by: UJ on May 15, 2009 1:45 PM

Hello,
Hope you have done all the required configurations for the checking of double invoice and ticked the vendor for the double invoice checking in vendor master record.
You have to understand the way the system does the double invoice check.
As per the configuration, if the system identifies an invoice for a vendor whose double invoice check is activated, at the time of MIRO, system will update a separate table.
So system will check for the double invoice entry among the invoices entered after making the tick in the vendor master.
i meant to say that, if you are introducing this double invoice check in between the transactions, the check will be valid only for the invoices entered after the activation of double invoice check.
Regards

Set Check for Duplicate Invoices.

Hi,
what is the difference if is set "Set Check for Duplicate Invoices"
in MIRO?
Best regards

HI,
This check will prevent incoming invoices being accidentally entered and paid more than once.
You can choose whether to activate or deactivate the check criteria of company code, reference document number and invoice date for each company code. The more criteria that you activate, the lower the probability of the system finding a duplicate invoice.
The company code check makes sense if you work with more than one company code.
Depending on the reference document number entry, the system checks as follows:
1. If you have entered a reference document number, the system checks whether the invoice matches in the following attributes:
Company code
Vendor
Currency
Invoice date
Reference document number
2. If you have not entered a reference document number, the system
3. checks whether the invoice matches in the following attributes:
Company code
Vendor
Currency
Invoice date
Amount in
document currency
Depending on the system settings, a warning message or an error message appears if the system finds an invoice that matches all attributes.
Requirements
The field Chk double inv. (Check for duplicate invoice) must be flagged on the Accounting view in the vendor master record.
Regards
Aasif

Set Tolerance Limits for Price Variance when PO-based Purch.Requisition

We must garanty that Price from Purch.Requisition will be the same at PO.
IF some variance occur a error messag must be sent to user and PO could not be saved.
I found at customzing under SPRO > Materials Management > Purchasing > Purch.requisition > Set Tolerance Limits for Price Variance .
Reading the help of customizing it mean the system consists what we need..
I have created tolerance limit NB, and set limits for all checks as 0,01.
When I will activate messages as recommended on help no messages 601 and 602 have the text that guide us to correctly setting.
The help mention that after create tolerance limit we must set this tolerance by document type..but I didnt find this field at customzing
Does anyone can help me ?
See the help on customizing below
Set Tolerance Limits for Price Variance
In this step, you can define percentage-based and value-based (absolute) tolerance limits for price variances between purchase orders and purchase requisitions. Variance types are mapped out in the SAP system by tolerance keys.
You define the tolerance limits for each tolerance key and assign your tolerance key to the document types for purchase requisitions. The tolerance limit then applies for all documents of this document type.
When processing a purchase order, the system checks whether the unit price of a purchase order item differs from the unit price of a purchase requisition item. If you have configured, activated and defined tolerance limits in document types, variances are permitted in the tolerance limits. If the variance exceeds the tolerance limit, the system issues a warning. If you have defined a percentage-based and a value-based absolute tolerance limit, the strictest of the two variances will apply for this check.
Note
You can determine whether the system messages (601 and 602) appear as warnings or error messages in step "Define Attributes of System Messages".
To do this, go to the Materials Management IMG and choose Purchasing -> Environment Data -> Define Attributes of System Messages.
Requirements
The tolerance key must be defined in step Define Tolerance Key.
Activities
1. Define tolerance limits for each tolerance key.
2. Define the tolerance key in step Define Document Types.
Thx and best regards,
Ale

HI
SET TOLERANCE LIMITS FOR PURCHASE REQUISITION UNDER THE DEFINE DOCUMENTS FOR PR
AFTER SETTING TOLERANCE LIMITS WHILE CREATING PURCHASE U WILL GET BASED ON TOLERANCE LIMITS THERE FOUR WAYS TO SET TOLERANCE LITS
1
ABSOLUTE VALUE
2
PERCANTAGE
3
TOTAL PO VALUE
4
QUANITY BASED PRICE PER UNIT
OK BYE

Set Tolerance Limits for Price Variance for PR missing from SPRO

I'm looking into setting up tolerance limits for price variance at the PR level. But when i navigate here:
SPRO > Materials Management > Purchasing > Purch.requisition > Set Tolerance Limits for Price Variance
I'm not seeing that available in SPRO. It's available for PO's but not PR's. We want to be able to set tolerances on the PR to be applied to the PO for non stock items (material master). Please advise

Hi,
There is no standard configuration option to set the tolerance limit at PR level. You may set the tolerance limit for PO and control the price change. If you want the same functionality at PR level, then you have to go for development. Please check whether the BAdI: ME_PROCESS_REQ_CUST can fulfill your requirement. You may set the tolerance limit in OLME - PO - Set Tolerance Limits for Price Variance itself and write the logic in the BAdI to check the price variance in PR based on the same configuration (table T169G and similar).
You may check the similar thread: PR VS PO Price Tolerance
Regards,
AKPT

List of out of Tolerance (Price Variance) Invoices.

Hi Gurus,
Please tell me How to get the list of Out of Tolerance (Price Varience) invoices posted for a particular Period. ex ( 1st march to 31 st march).

Have you tried running transaction MRBR and filtering on the price blocking indicator?

SSIS How to set Tolerance levels via parameters

Hi all
I am after some help as pretty new to SSIS. I need to write some validation requirements on data which needs to be in SSIS.
What I want to achieve is setting Tolerance levels on two fields.
Field A has a tolerance lvl of 0%
Field B has a tolerance lvl of 200%
Both the fields will need to update a status field if the tolerance rule is broken
These will need to be parametized as well.
Thanks in advance

Sorry not enough information
From what you provided, it sounds like a simple update statement to me which can be called from an execute sql task.
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Tolerance limit for invoice

Hi all,
We have a requirement where we need to put tolerance limit for invoice both at the line item level and header level of the invoice. Also both % and absolute tolerance limits.i.e. if the invoice is 25 EUR or 3% more than the suggested price, it should be blocked. It is true both at line item and header level independently.
I tried in test systems and at line item level, we could achieve it thru configuring PP tolerance key.
Also at the header level, BD helps in achieving the Absolute tolerance.
But how can we configure at header level, % value of tolerance limit?
Appreciate the help.
Thanks,

I don't think there will be separate tolerance limit for header level in invoicing, it will not allow you to post with diff values in item and header.
Just check and let me know, if this wrong.
Regards
TGB

Set tolerance limts in invoice Verifiction

Similar Messages

Maybe you are looking for