Set Transaction Variant to specific user

Hi all,
Is it possible to set a defined Transaction Variant (SHD0) to a specific user or to a user group?
I want only some users run a transaction thought the variant, and other users run thought standard transaction.
Thanks and Regards in advance.
Urtzi

Hi Subramanian,
Do you mean that if I create a transacation variant i.e.: for the transaction AS01 called U_USERNAME would be specific for my user?
Is tha t correct?
Thanks

Similar Messages

  • SHD0 -- Transaction variant for specific users

    Dear All,
    I want to change label text for VA02 using GUIXT.
    I have created Group ZGROUP1 and the transaction variant is ZGROUP1VA02. Then I have activated the variant. It is supposed to change the label for the users belong to ZGROUP1 but it is changing for all users.
    Please advice and thanks in advance.
    Regards,
    Maysara Salah

    Hi after creating the group and  variant , you need to add the users in that group under user assignment tab and after entering the user name just click assign and then click set proposal.
    Note: Do not activate the variant. (If you activate it , the changes will be affected for all users)
    Thanks & Regards,
    Madhumahesh.

  • Assignment of Transaction variant to some users only

    Hi,
    I have created one transaction variant for T.code:MM02. With this some fields were made display mode. I want assign this Transaction variant to few of the users only not all users. That is for others the above are changeble.
    So I want to know how to assign this transaction variant to respective users only. If I activate this as standard variant, it is applicable to all. But I want to assign to few only.
    Reagrds.
    Veerappa
    Edited by: Chinna Veerappa on Oct 17, 2008 7:03 AM

    Hi,
    I tried this before posting the above. When I assigned some users, it is reflecting all users (Irrespective of users assignment, if I activated).
    Regards,
    Veerappa

  • How do I know  what transactions executed by specific user for last month

    All
    We have a request to find out  what transactions are executed by secific user
    for last couple of months.
    Is there any report in SAP would tell me ?
    Please advise.
    From
    PT.

    Hello PT,
    If you use the search for the term "How do I know what transactions executed by specific user for last month" then I guarantee you some good hits in the result, and further more detailed search terms to use...
    Cheers,
    Julius
    (this time in response to the correct thread...)

  • Transaction Variant for particular users

    Hi all,
        I have to hide Qty field in ME22. i created a transaction variant for this.
        But i want that to be activated only for specific users.
       I created a variant group and assigned users to that group.
    But that is not working. the variant is getting activated for all users.I dont know which part  i  missed.
    Help me in this regard.
    Regards,
    Viswanath babu

    Hi  Viswanath,
    Have you followed the naming convetion -
    Check the doumentation in SHD0 ( Utilities -> Application Help ).
    <b>How are the variant groups maintained?
    You can enter the group names on the "Variant Group" tab and maintain variant groups with the "Create" or "Change" functions.
    The group name must be in the "correct" namespace.
    In addition, there are two Where-Used Lists:
    Which users are assigned to the group,
    For which transactions the group applies.
    Which transaction variants belong to the groups?
    The name of a transaction variant that is to belong to a group meets the following naming conventions:
    <Name of variant group><name of transaction code>. Example: A transaction variant is to be created for the XYZ transaction that belongs to GROUP1. The name of the transaction variant is then GROUP1XYZ.
    Due to this naming convention, the group name must be in the "correct" namespace.
    Transaction variants that (randomly) meet this naming convention do not necessarily belong to a group. The group assignment is activated by
    1. Creating a group
    2. Assigning users to this group
    A transaction variant that belongs to a group can also be used this way, like a transaction variant without a group.
    How are the transaction variants that belong to a group maintained?
    Transaction variants that belong to a group are maintained in the same way as all other transaction variants, they are distinguished using a naming convention (<name of variant group> <name of transaction codes>).</b>Cheers

  • Is it possible to set table-variant from one user to another one?

    Is it possible to set table-variants from a t-code like fb60 from one user to another one?
    I mean that both user have the same table-variants.

    You mean screen variant, where you will need to anter the GL line items in FB50?
    then you can set your desired variant as DEFAULT for all users, when it is configured.
    Else thru SU10, for all of your users, add parameter ID SCRVAR and give your parameter value (screen variant name) and SAVE.

  • Set transaction statement reserving specific tables

    Hello,
    In the past ten years I developed on Oracle Rdb (on OpenVMS platform). In Rdb there's a possibility to reserve specific tables for shared read only, others for read write due to locking mechanisms. E.g.:
    SET TRANSACTION READ WRITE RESERVING EMPLOYEES FOR PROTECTED WRITE, JOBS, SALARY_HISTORY FOR SHARED READ;
    COMMIT ;Is there a similar way in 10gR2?

    There was a discussion on this last year.
    See Slightly off topic: Read-only tables pre 11g
    Then, again, 11g supplies this "out of the box"
    Hemant K Chitale
    http://hemantoracledba.blogspot.com

  • How to Run std program with a specific variant for specific user?

    Hi guys
    We have a std program which will be run by different users in the company. Now the requirement is to make sure that each user runs the report with a specific varaint. Can we control this if yes how?
    one options we thought about was to create a transaction in SE93 and define the program to run with a predefined varaint and assign the new custom tcode to the user profile. But we have many different users and we will end up with creating many transactions which we would like to avoid. Is there any other option to control the std program such that each user can run the program only with a pre-defined varaint and the one which only the user is suppoed to run. thanks in advance.

    We have a std program which will be run by different users in the company. Now the requirement is to make sure that each user runs the report with a specific varaint. Can we control this if yes how
    you can do this..
    You can create a Custom table
    userid     keyfield
    program  keyfield
    variant    keyfield
    programdesc
    Make the table Maintaintable(usnig table maintenance )
    Now create another Program
    It takes input of the Program name( using selection screen)
    LOGIC
    in side that place a logic ,
    Based on the user name  and program name Get the variant name from above table
    Now Submit the program with the variant you have selected above.
    Use Variant Addition when you use SUBMIT
    So now program executed based on user variant.
    Now you create a Transaction for this program.
    When use Runs the Transaction , user needs to input the Program name which he wants to execute.
    and Output will be shown based on the variants
    Regards
    Vijay Babu Dudla

  • Set time restriction for specific user to send email via exchange server

    Is it possible with Exchange server to limit certain users to sending their mail (Outlook/Exchange) only between designated
    times? Thanks.
    Babu

    Hi Babu,
    Based on my knowledge, Exchange has no built-in function to restrict some users sending their messages in a period of time. Your understanding will be appreciated.
    Best regards,
    If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Amy Wang
    TechNet Community Support

  • User Specific Transaction Variant

    Hi,
    Can i please have guidelines for Transaction variant creation, specially user specific transaction variant creation along with example?
    Regards,
    Samir Wadajkar

    Dear
    Please see this wiki for useful :http://wiki.sdn.sap.com/wiki/display/Snippets/Transaction%20Variant%20-%20A%20Step%20by%20Step%20Guide%20for%20Creation
    OR
    Go to SHD0
    Enter the transaction code - Enter the transaction variant YXXX under transaction variants tab
    Create - the transaction variant. When you back after creating .... Save all the screens and do a syntax check - this will take you to different screen - Just execute and come back
    You should now be in SHD0 with your transaction code as well as transaction variant.
    Now, go to 'GOTO' on application tool bar - Create transaction variant. Do not check 'Inherit GUI attributes' under classification and check all under GUI SUPPORT
    Execute your newly create Ytransaction
    Go back to SHD0 again and repeat the same process but enter different name than previous one. do the exact same process.
    Create new transaction which means enter different transactio name like if the previous one is yxxx1 ... create this as yxxx2.
    You can take the standard transaction from every user or who you dont want to give by removing the authorization from user master (talk to security people)
    Hope this will be usefull
    Regards
    JH

  • Authorization issue on SHD0 transaction variant in R/3

    Hi,
    Can anyone help me on the below issue?
    Created a transaction variant ZME31K using SHD0 on R/3 system with the base transaction ME31K.
    And created a transaction ZME31K for the above transaction variant.
    Created one ID which has access only to transaction ZME31K.
    But when tried to create contract using ZME31K, it allows to create the contract, but ended up with message  "You are not authorized to use ME31K".
    Anyone faced similar issue before? how this can be resolved? As per the busniess requirement, they can provide access only to the transaction variant for the user and they will not be assigned to ME31K.
    -Thanks,

    > We are doing an Upgrade assessment wherein at R/3 side, the system is being upgraded from 4.6 to ECC 6.0.
    > I wanted to know the impact the Change in Transactions at R/3 side..  namely transactions..
    > AS02, CT02, F-02, F-41, F-49, FB01 would have on BW.
    What do you mean? I don't get your question. What impact should those transaction have on BI?
    Markus

  • How to execute a transaction with a different user from the logged user?

    Hello Experts!
    I'm trying to find out a solution about this scenario: our users need to release a Purchase Order (ME28) and/or a Service Entry Sheet (ML85) in SAP from a WEB based application through TIBCO, but the requirement is to execute this operation with the same SAP User name of the user (with his authorization) and not with the TIBCO user that is logged to SAP.
    Is there someone that could suggest me a real time solution and how to develop it? I really appreciate your contribute and I'm at your disposal for any further information.
    Thank you very much!
    Alessandro

    Hi Rob!
    Thank you for your help, but I can't apply this solution, because we need to execute the transaction with a specific user name and not a generic user, besides our user have different authorization, for example the user Mr. Rossi can release only his Purchase Order but not the PO of another user Mr. Bianchi. Moreover we need to see the PO released/modified from a specif user name. So this is our constraint.
    Bye Ale.

  • Transaction variant for CA02

    Dear Gurus,
    We will be maintaining two group counters under one group of routing.  Now, two different users will be accessing CA02.  The 2nd user shall be restricted to edit one group counter only.  With this, I need to create Transaction variant for this user wherein the 1st counter can be edited while the second counter must be in display mode.  Kindly give inputs how i do this.
    Thanks.
    Regards,
    Ching

    Ching,
    Are these group counters for the same plant? If so no standard option available.
    Regards,
    Prasobh

  • Transaction variant for IR02

    Hi Experts,
    i want to make some fields non-editable while the user navigates to the transaction IR02. This can be acheived using transaction variant because the user will be navigating through a button click from another program. But here i have a problem where i am not able to create transaction variant. It is giving an error whle i try to create it. Has anyone created a variant for IR02. Pls give your suggestions to acheive the same.
    Thanks in advance
    Shanthi

    Dear PP CON,
    No need to create any Transaction variant for this, while creating the role,after assigning the
    Authorization for T code MFBF,check the value for this authorization object C_BACKFL   REM:
    Backflushing and include the tick marks for B alone and remove the tick marks for
    K     Component backflush
    L     Activity backlush.
    Save the changes --->refresh the menu and if you need to assign to a test user , assign it and check.
    Check & revert back.
    Regards
    Mangalraj.S

  • Two transaction variant do not working for a user

    Hi Gurus
    I have created two Z t code and made transaction variant through T Code SHD0 and assigned these two ZTcode to a user. now when a user is running the Ztcode screen variant is active on only one. when i assign second one to  the user again than screen variant of first ZT code do not work.
    can any one tell me why system is doing so.
    Regards
    Shiv

    Hi, I have the same situation. Can you please help how your case got solved ?
    Basically I have created two transaction variants- one for XD02, the other for XD03. When I am trying to assign a user to both these transaction variants ( using SET PROPOSAL), only one is getting assigned, other is getting deactivated. Please help.

Maybe you are looking for