Set Trim Marks distance

Hi all!
I have a problem. I have to create an add for a magazine.
In the technical requirements they say that "the size of the ad file equals to the trim size of the magazine plus 15mm from each side (5mm of bleed box plus 10 mm for trim marks, file name, date and time). The trim box is to be centered strictly in the PDF file".
So I wonder how (and if) it's possible to set the 10mm-size for the trim marks.
Thanks in advance

ID will allow you to change the offset of the automatic crop marks when you export a PDF, but the automatic marks are shorter than 10 mm, so my inclination would be to use manually generated marks instead, and this is the workflow I would use:
Set up the new file with the document size at the trim dimensions. Click the more options button to show the Bleed and Slug field if they are not showing already, and enter 5mm in the bleed size fields (by default these fileds are linked, so you can enter the number in the first field then move on to the Slug and they will all fill) then ente 15 mm in the first Slug box and click the chainlink symbol to fill the other three. Press OK.
Your document will show boxes for the the page edge (and any margins you set), and outside that a red line indsicating the Bleed, and a cyan line indicating the slug area. Add a text box and type any page info you like into it in the slug area outside the bleed box, or you can use the Page Info automatic marks during export to add the filename, date and time.
Build your ad, being sure to extend any color that hits the page edge out to the bleed guide.
When you are finished, add a frame with no fill and no stroke the size of the page (trim) and select it. Open the Scripts panel and under Application find the Sample Scripts folder, then Javascript, and finally CropMarks.jsx. Double click the script. In the dialog, set the length of the marks to 10mm and the offset to 5mm (thpe in the units, ID will convert them to points), and click the "entire selection" radio button, and uncheck the Registration Marks box:
The script will add a layer with the marks.
When you export, go to the Marks and Bleeds screen and be sure you check the Include Slug Area box under bleed (the bleed size itself is now irrelevant). Also set the crop mark offset to 5mm and check the box for Page info if you didn't include that manually.

Similar Messages

I have justed upgraded CS2 to CS5. How do I set artboard crop or trim marks for printing?

I have justed upgraded CS2 to CS5. How do I set artboard crop or trim marks for printing? It was under the "OBJECTS" menu in CS2, but I can't find it in CS5.

it actually works the same way but better you don't see it that way but with perhaps more experience you might catch on and say "oh now I see that' all I have to do.
Multiple artboards, which you did not have in CS 2 , changes the equation.
When you open a new document you can set up a gangup in the new document dialog then say for a business card then do one business card in the first one.
Then copy the art and text of that first one and in one command paste that art in all of the artboards with one command, you can then make another artboard that encompasses all the artboards and you now have a gang up say six up you can now print all a once as a gang up or print a range of the artboards or specific artboards.
As a matter of fact now that you can paste on all artboards with one command AI CS 5 actually has a step and repeat feature that works verticaly and horizontally at the same time. And an improved version is easily had.
Also since you probably know how many you need of this first artboard then you can simply make one rectangle for for the first artboard and give it a crop area effect and when you do your copy include the rectangle and then paste on all artboards and there you are
look at the video, see how cool. less complicated not more complicated. And as other users explore this function I bet they come up with even better ideas.
http://mysite.verizon.net/wzphoto/Artboards.mov
I am going to make one adjustment here instead of doing a command c to copy the first artboard it would be better to do a command x to cut the first one since the command paste on all artboard does exactly that. So if you do a command c and a command option shift v then you have two rectangles and art and crop marks pasted on top of each other. Probably won't do any harm but might be confusing in the layers panel.

Trim marks positioning incorrect for files that have a larger crop box than trim box

I've seen this question in one other place on the forum, but it doesn't look like it ever got answered. It's been driving me nuts for months, so I'm going to try to do a very simple walkthrough for this problem to find out if this is a glitch in the software, or I'm doing something wrong.
When telling Acrobat XI Pro to print a PDF with "Trim Marks," the marks are applied to the "CropBox" instead of the "TrimBox." As far as I'm concerned, this is incorrect behavior. Acrobat 9 Pro, on the other hand, applies the Trim Marks to the TrimBox. Since I receive files with bleed and need to print out a sample on the printer on a regular basis, I have found it necessary to leave Acrobat 9 installed just to print these files. I've done a very simple walkthrough on how to generate a very simple mockup file from InDesign and output it to better illustrate the problem.
I've created a new InDesign document that is 5x7 inches with 1/8" bleed. To make it easier to spot the applicable boxes in the file, I've made a box with a 1/2 point stroke. I made a magenta stroked box that's 5x7 inches to signify the trim, and a cyan stroked box that's 5.25 x 7.25 inches to signify the bleed. I then output it to a high resolution PDF. For the purposes of this example to make sure this can be replicated easily, I'm using the built-in [PDF/X-4:2008] preset to start off with. The only adjustment I'm making to this preset is going to the "Marks and Bleeds" section to check the "Use Document Bleed Settings."
When opening the resulting PDF in Acrobat XI Pro, you can see that the various "Page Boxes" have been applied properly. "CropBox" is set to 0 to include all of the artwork in the file, "BleedBox" is set to 0 since there's nothing outside of the bleed area in this pdf, and "TrimBox" is set to 0.125 in since we gave this file 1/8" bleed. When going to print the file, you can go to "Advanced" and then "Marks and Bleeds" to enable printing with the "Trim Marks." Once you click ok, you can see in the preview image that the trim marks are lining up to the cyan box instead of the magenta box.
As an extra step, it's possible to confirm that the trim marks are going to the crop box and not the bleed box or trim box. If you add a slug to your InDesign document and reoutput the pdf (being sure to include the slug area in the "Marks and Bleeds" section), you will find that the Trim Marks are even further outside of the cyan box. If you output your PDF from InDesign with Trim Marks already applied, you can turn on the Trim Marks option when going to print in Acrobat to see that Acrobat's Trim Marks are going outside of the crop box as well instead of overlapping the ones generated by InDesign.
Is there any fix for this behavior aside from opening the files in Acrobat 9 and printing from there instead?

yes, in the pure definition of the word in the world of print, Crop DOES equal trim...in the exact concept of what YOU see it as.
in Adobe's little bubble, they decided to call the outer box the "Crop" so that they could differentiate between trim and crop in the page box model.
These pictures should help, if not, I'm not going to continue to explain something that you don't want to grasp.
Each picture shows what Acrobat is calling each page box line. since they felt the need to call one trim and one crop, you have to widen your concept of what Adobe is defining "crop" as. Not saying its right, but it is what they are doing, and what is causing the whole issue.
All that aside, if you are not understanding the page box model, then your PDFs are probably not set up this way, so you probably wouldn't even notice the change... So why are you posting on this thread?

Trim Marks Not Printing from Acrobat 9 Pro

I work at an envelope printing company, and we have recently
upgraded my computer (Windows XP Pro SP 3) to Creative Suite 4.
When I try to print a customer's PDF file with trim marks to show
our typesetting department how to place the art, the trim marks
don't print. I have tried every option I can find in the Advanced
section of the Print dialog box. What worked for Acrobat 8 doesn't
work for me anymore. Does anyone have any suggestions?
Thanks for your help!

Hello,
I'm sorry I'm not able to address your question. These forums
are specific to the
Acrobat.com website and its set of hosted services, and do
not cover the Acrobat family of desktop products.
Any questions related to the Acrobat family of desktop
products would be best suited in the Acrobat User Forums:
Link to
Acrobat Forums
Thanks!
Michelle

Indesign to PDF trim mark issue

I have a business card file in InDesign and exported it to a PDF last week with trim marks for bleed with no issues. Now I export the same file with the same export settings and there is a white trim space.
Last week's export:
This week's export:

If you hold down the SHIFT key when placing your PDF you will get different options.
In your top screenshot you had the BLEED option selected and it only shows the part of the crop marks that intrude into the bleed area.
In your bottom screenshot you have the import option set to something else like BOUNDING BOX or CROP.
This will show you the complete crop marks, not just the part that are in the bleed.
This setting is sticky and will remain the default until you change it.
The full crop marks are more useful when cutting than the way you normally have it, with just partial crop marks.
Depending on the vendor that is printing the business cards they may even not want crops at all, but they will definitely need the bleeds.

Trim Mark problem. CS5 Any suggestions?

I am setting out A4 front and back covers as one piece of (A3+bleed) artwork to be reproduced by digital printing. After printing, the covers will be trimmed on four sides then wire bound.
I set up artwork with covers side by side with 10mm in centre to allow 5mm trim for each spine. My problem is that Illustrator CS5 adds trims on the proof which do not include a facility to specify centrefold trims or even a centreline. AI assumes all artwork will be an single rectangle and only puts trims on the four corners.
I can create two covers as two separate pieces of artwork with suitable bleed and trims, but then I must proof front and back separately and the printer must re-position each cover side by side arranging trims with his pre-press software. That is inefficient.
I simply want to hand over a facsimile proof and a complete .pdf fiIe with correct trims. I tried drawing the spine trims I required, but AI ignored them for proofing, even with the desk top enlarged to accommodate the trim marks. The Print dialogue box trims take priority. Has Adobe missed a trick here or am I overlooking a set-up requirement?
I considered taking the artwork into InDesign but ID also treats my artwork as one page with or without a centrefold, according to how I specify the pages.
But for the fold facility, the ID Print dialogue behaves the same as AI, as you might expect.
Can anyone offer suggestions other than the separate artwork option I have described?

Dear TerraAustralis,
I work in CS5 and I am trying to create trim marks so that I can manually adjust it after and create more of them since I have a multiple itmes to trim.
I get an error message when I try to create the mark:
I have a rectangle with or with stroke or fill (it does the same error), I selct Object-Trim marks
and I get this: <The filter cannot complete because of an unknown error>
NESS
what can I do to be able to edit the marks without making them all manually like before...
since the Crop marks command does not allow us to manipulate the marks?
Thank you in advance for your help.
cc

Trim Mark Problem. AI & ID CS5. Any Suggestions?

I am setting out A4 front and back covers as one piece of (A3+bleed) artwork to be reproduced by digital printing. After printing, the covers will be trimmed on four sides then wire bound.
I set up artwork with covers side by side with 10mm in centre to allow 5mm trim for each spine. My problem is that Illustrator CS5 adds trims on the proof which do not include a facility to specify centrefold trims or even a centreline. AI assumes all artwork will be an single rectangle and only puts trims on the four corners.
I can create two covers as two separate pieces of artwork with suitable bleed and trims, but then I must proof front and back separately and the printer must re-position each cover side by side arranging trims with his pre-press software. That is inefficient.
I simply want to hand over a facsimile proof and a complete .pdf fiIe with correct trims. I tried drawing the spine trims I required, but AI ignored them for proofing, even with the desk top enlarged to accommodate the trim marks. The Print dialogue box trims take priority. Has Adobe missed a trick here or am I overlooking a set-up requirement?
I considered taking the artwork into InDesign but ID also treats my artwork as one page with or without a centrefold, according to how I specify the pages.
But for the fold facility, the ID Print dialogue behaves the same as AI, as you might expect.
Can anyone offer suggestions other than the separate artwork option I have described?

TerraAustralis wrote:
I can create two covers as two separate pieces of artwork with suitable bleed and trims, but then I must proof front and back separately and the printer must re-position each cover side by side arranging trims with his pre-press software. That is inefficient.
Have you asked your printer about this? I'm a printer and if you gave me a file laid up on a page with your trim marks from Illustrator the first thing I'd do it place it in Indesign to strip them off and give me individual pages so I could impose it with my pre press software!
Check first...Adobe hasn't missed a trick, it's how the printing world expects it's files.

Trouble with Crop and Trim Marks in Illustrator CS3

Hi,
I'm creating a print document (in Illustrator CS3, using Windows Vista) and sending to a professional printer who requires trim marks. I've created my document so that there is 0.125" trim area on all sides to bleed. Here is what I'm doing to create trim marks:
Artboard is set at desired print size (5.5"x8.5") + 1/8" trim= 5.75"x8.75"
Object>Crop Area>Make This give me crop marks at the edge of my artboard
then I do
Object>Crop Area>Release This allows me to change my crop marks to my desired, 0.125" size
Then i do
Filter>Create>Crop Marks This shows me my crop marks exactly where I want them in a red retangle
then I save the file as a PDF and select the following settings:
Press Quality
Marks and Bleeds: I select the "Trim Marks" box to print the trim marks
If I tell it to show bleeds, it only shows up on the top and bottom, not left and right, even though there is "0.125" in all fields.
(Although these have only showed up for me once, I cannot get it to show up again)
When I select "Save" and then view the file, the trim marks are there, but not were I specified them to be. They show up at the edge of the artboard.
When I change the Artboard to letter size (8.5x11), THEN the crop marks show up where they're supposed to be. Why is this happening???
Any thoughts?? Thank you!

I can get crop marks by using the "Print" menu and printing to PDF. My question is: How do you handle bleeds when printing crop marks in the "Save" or "Print" stage? Aren't the crop marks placed at the file extents?

Trim Marks - feature lost in CS4

Going back many versions in Illustrator, we had only Crop Marks. Then (thankfully) we got Trim Marks which allowed multiple sets of marks on the same page, all selectable. The command moved around from one menu to another, but not in CS4 it's just gone completely. The Crop Marks we have now in CS4 only allow one per page, and they are not selectable, and, if you happen to make a guide out of the bounding box you used to create the Crop Marks, the crop marks vanish.
Simple layouts for a defined area have always worked well on a single letter size layout by drawing the bounding boxes, let's say for a business card and an envelope and a shipping label, making trim marks (or the Filter->Crop Marks) and then converting the three bounding boxes to Guides.
Can't do that no more. Why? Why oh why would Adobe take away a feature that has worked so well for so many years. And don't tell me about multiple artboards. I get how they could be used, but that is no excuse for eliminating the feature.

Mac: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4617
Win: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4618

Crop/Trim Marks Wrong Position: Quark 6, PS File, Distiller 8 (Poster Sizes)

I am having a similar problem as a Quark 7 user making PDFs of posters:
http://www.adobeforums.com/webx?128@@.3c05836f
Acrobat Distiller 8 is moving my document's bottom trim marks into the wrong position. They appear too high on the PDF instead of all the way at the bottom.
1. Create 24"x36" document in Quark 6.52
2. Choose "File -> Export Layout as PDF"
3. Select crops and bleeds in Export Options
4. Save Postscript file to desktop
5. Drag and drop the .ps file onto Distiller 8
The resulting PDF has the bottom crop marks (trim marks) in the wrong position. If I drop the .ps file onto Distiller 4, Distiller 5, or Preview, the crop marks show up in the correct position.
Adobe Tech Support verified that the problem occurs in Distiller 8. They recommended that I upgrade to Distiller 9, which appears to be fixed.
My own workaround so far is to Print from Quark to the Adobe PDF 8.0 "printer" that gets installed with Acrobat. I can then manually set my page size to 25"x37" to fit the crop marks.
If anyone would like to see examples of the issue, or try it out for themselves, I have uploaded sample files to my web server.
Distiller 8 PDF:
http://www.jwgdesign.com/files/Poster-Test/Poster-Test-v8.pdf
Distiller 5 PDF:
http://www.jwgdesign.com/files/Poster-Test/Poster-Test-v5.pdf
Postscript File:
http://www.jwgdesign.com/files/Poster-Test/Poster-Test.ps
Quark File:
http://www.jwgdesign.com/files/Poster-Test/Poster-Test
ZIP archive of all files:
http://www.jwgdesign.com/files/Poster-Test.zip
If anybody else has ideas, please share them. I was hoping that there would be an update that addressed the issue, but it appears that Adobe will never fix this in Distiller 8 because they consider it "fixed" in Distiller 9.
For reference, I am using a Powermac G4 "Sawtooth" with a 1.2GHz G4 CPU, 1.25GB RAM, Mac OS X 10.4.11 "Tiger", Quark 6.52, and Creative Suite 3 Design Standard (CS3) with Acrobat Professional 8.1.2.

Indeed, if fixed in 9 then it will not be included in 8 ...
Jon
PS - have you thought about leaving off the marks from Quark and then
adding inside Acrobat within Print Production / Add Marks / ?

Adding trim marks in Illustrator causing document to print as a smaller size

If anyone can help me with this issue I've been having I would greatly appreciate it!
I created a document in Illustrator which has 2 artboards, each 5 x 7 with a .125 bleed and trim marks (that I created once I saved it as a PDF)
Now, when I print the file in Illustrator, it prints normally- as two 5x7 artboards with trim marks and everything. When I try to save it as a PDF in Acrobat and print it from there, it prints the two artboards with trim marks but they have been downsized to 4 x 6. Adobe asks me on the phone today..."how do you know they are not printing as 5 x 7" Well, because I measured it.
What I did figure out is that it is definitely the trim marks that are causing the problem because as soon as I remove them, it prints true to size.
Anyways I need to print everything in PDF form so I can send it to my clients, so they can open the PDF and easily print it with the trim marks for easy cutting.
Adobe says it COULD be a problem with a printer setting, but Epson is saying there is nothing else I can do as far as the printing set up goes. I have an Epson Stylus Pro 3880 if this helps. So apparently I'm doing something wrong in Illustrator or Acrobat.
Has anyone else had this issue?

Create the trim marks in Illustrator, not Acrobat. In Illustrator, create an invisible holding line around the artboard ( i.e., no fill, no stroke @ 5x7 size > then lock it in place ). Make sure no elements fall outside the 5x7 size.

Trim Marks Won't Print in Illustrator CS 3

Even though I checkmark Print > Marks & Bleed > Trim Marks they still don't print. I set Type > Roman and Weight > .5pt. Does anybody have any suggestions so I can get these to print?

Yes, to overisized, thanks. In fact I just created a landscape document 8.5 x 11 and simply drew a 5.5 x 8.5 rectangle, then Object > Crop Area > Make and tried to print it as above. Even though the Crop marks are clearly visible and well within the document's boundaries they would not print. In fact, with just those crop marks on the document, when I try to print, I get a Print error: The pages selected to print are all blank. So I drew an object and just the object printed, no crop marks.
Some variable somewhere has gotten reset as I've never had this problem in the past. Can someone please help?

Is there an easier way to creating complex trim marks?

I'm creating the surface graphics for a box/package cut-out and it will require multiple trim marks. I could make individual trim marks for the box but their would be over 30 edges. Could there be a script out there that would make it easier?
Thank you in advance!

axytrix,
What about a dieline (set) on its own layer, not to be printed but used as the template(s) for die cutting?
You should be able to get the exact requirements from the (die cutting) company in question.
You may read up on dieline and die cutting before you call anyone so you known more and get to know more.

Bleeds and Trim Marks

So I am desinging a business card for a company I work for. The company we are sending them off too obviously needs to have the bleed and trims marks. The only thing I can't figure out is how do I make the bleed marks visible to them? When I print the document it shows me the trim marks but since I have a white background, it looks as if there is no border. Should I add a border to the actual Artboard?

You can use the automated marks
If you want to draw your own trimmarks
file >> document setup>> set the bleed amount - you will see a red line showing you where the bleed ends

Trim marks query urgent

Hi all
I have an assignment with the following dimensions flat 325mmx225mm includes trim size of 15mm at the bottom and 3mm on the RHS...how should I represent this in my artboard when exported to pdf to make sure they are visible?
Thanks

If working in CS 4 why no just se the artboard to the trim size add the bleed unselecting the link icon for the bleed and then set the bleeds and check trim marks under printer marks in the marks and bleeds panel of the PDF options dialog when saving as pdf.
I gives you something like this i used the wrong dimensions but you get the idea.

Set Trim Marks distance

Similar Messages

Maybe you are looking for