Set up 4 squares and type vertically

http://www.masterpiecestudios.com/Silver-Double-Hearts/Catalog.cfm/iParentId/0/i CatID/29590
I bought invitations from here, and need to set up the page in Pages. Anyone have any idea how to get the quadrants right, and type vertically, instead of horizontally?

If I understand what you're tryin g to do, you don't nee to type vertivally. First, open a blank document and go to Page Setup (under the File Menu) and choose the landscape icon. (The one in the middle will do nicely.) This will give you a horizontal page. Next create a Type Box and be sure "Fixed on page" is selected from the Wrap Inspector. (Or you can just click outside the layout area before creating the type box.) Also, Show Layout and Show Rulers should be selected from the View menu. Now drag your Type box into the top left quadrant of the page. (The rulers will help you position it. At this point "almost" is close enough.) Type your copy in the box and chose the typeface and size you want. Now print it out on a plain sheet and hold it to the light against your invitations. Go back to your new document and nudge the box around until you get it where you want it. Next, select the box (so the four handles are showing) and type Command D three times. You now have four boxes. Drag and nudge them into position, testing on blank paper until everything is where it should be. When all is as you want it, put in your invitation stock and print. Lastly, enjoy the party!
Good luck
Walt
iMac G5 Mac OS X (10.4.6)

Similar Messages

Font and type size automatically revert in Numbers

No matter what font or type size I use in a spreadsheet, when I move to a new cell, the font and type revert to the default, Helvetica Neue 10 point. If I set a block of cells to a certain font and size, they work properly until i have to cut and paste something out of a cell, then that cell reverts back. No one seems to know why this happens. Any ideas on changing the defaults permanently?

You can set the default for each table style and, if you want, save your changes as a template which you can use for new documents.
What I think you are doing is setting the font size and type for a cell and expecting it to apply for all cells. It does not.
If you want this to be a default style for all new documents, first open up a new blank template. Otherwise do this in your current document. Select the table then select all cells (cmd-A). Change the font and type. The entire table should change. That's all you have to do if you are concerned about this single table in this one document.
If you want to have new tables start out with that same font and style, go to the lower part of the sidebar on the left where the table styles are. Find the one that looks like the one you started with. Click the disclosure triangle and choose "redefine style from table". From then on in this document any new tables created from that table style will have the font and style you specified. Do the same for the other table styles if you want to. If you want one of them to be the default table style, choose that in the sidebar also. If this is a new document and you save it as a template and you use that template for new documents, those documents will also have your new table style(s).

I have set up two users, one for myself and one for children. The computer automatically logs in for the children with no password required. When the children go to spotlight and type in a search criteria all of my files show up. How do I prevent this?

I have set up two users, one for myself and one for children. The computer automatically logs in for the children with no password required. When the children go to spotlight and type in a search criteria all of my files show and open up. How do I prevent this?

Log in to your account, and move all your files to your home folder. No other users should be able to access them there and they won't show up with a Spotlight search.
Make sure your kids' account(s) do not have admin privileges.

I have everything set for Arabic fonts and the keyboard as well. When I type in WORD or EXCEL I just get individual Arabic letters, but they never connect, they should be for example like this الس but they always appear like that ا ل س

I have everything set for Arabic fonts and the keyboard as well. When I type in WORD or EXCEL I just get individual Arabic letters, but they never connect, they should be for example like this الس but they always appear like that ا ل س

MS Word for Mac has never supported Arabic. You have to use other apps. Mellel is best, but Pages 5, TextEdit, Nisus Writer, or Open/LibreOffice should work OK.
Sometimes you can make Word for Mac do connected Arabic if you are editing a document created with Windows Word.

With 10.7.2 update iCal does not allow you to set "Reminders" by draging events from "All Day Events" into "Reminders" is there another way to do this instead of having to type out the entire reminder with date, time, and type?

With 10.7.2 update iCal does not allow you to set "Reminders" by draging events from "All Day Events" into "Reminders" is there another way to do this instead of having to type out the entire reminder with date, time, and type?
With Lion 10.7.1. you where able to drag events from "All Day Events" into the "Reminders" bar to create upcoming reminders.

Exactly the same question I was about to post!
Great being able to sync reminders (well overdue) however if I have to re-type a calener envent into reminders it's a waste of time!!
Come on Apple!!
Just need an option for the calender event to add to reminder or the old drag to add to reminder functionality back, Please???

Somewhere my "T" key is set as a keyword and everytime I type a t, I have a blank search open up with a tab. Impossible to use for email.

Somewhere my "T" key is set as a keyword and everytime I type a t, I have a blank search open up with a tab. Impossible to use for email.

Is it only T? Does pressing N open a new window, and does R reload the page?
The most likely reason for this is that the CTRL key is held down - see [[Keyboard shortcuts]] for information on what should happen when keys are held down together.
If a key isn't stuck or being held down, an extension could be the cause. See [[Troubleshooting extensions and themes]] to troubleshoot.

I'm trying to recover the network password for my Time Capsule so that I can connect another device (a PC) to it. I have my Macbook pro set to connect automatically and the password is hidden. How can I find out what it is.

My issue is that I'm trying to connect a PC to my wireless network run off of a Time capsule/airport router. My macbook pro connects fine but the network password is hidden and set to autoconnect. I thought I wrote the password down but when I try to connect the PC laptop and type in the timecapsule network PW is doesn't work. Trying to verify if the passwird I wrote down is correct but there doesn't seem to be a way to recover this.
Does anyone out there in the community know how to do this? (or do I just have to do a reset on the time capsule

Reset the TC.

How to Run a Request Set on specific days and at specific hours

Hi community,
The question is simple, how to rin a Request Set on Specific Days and at Specific hours?
Let me explain the scenario.
E-Business Suite, Release 11.5.9.
We have a request set under Sysadmin user. This Request set is running 24x7, during all year, and we want to restrict the execution from Monday to Friday since 08:00 a.m. to 20:00 p.m. in order to increase the productivity of our system and more over, to avoid the size increase of a table (OE_EXPOSURE_INTERFACE)
The Request Set includes 5 Requests:
10. Workflow Background Process.
20. GUZMAN: Cálculo metodo pago en pedidos.
30. GUZMAN: Exposición de crédito externo.
40. Credit Exposure Import.
50 Initialize Credit Summaries Table.
As you can see three of them are standar Oracle Order Management Processes and two of them are custom Oracle Order Management Processes; and the requests must be executed in that order.
We have just thinking about to create a Custom Manager with a workshift from Monday to Friday since 08:00 a.m. to 20:00 p.m., and include the requests as specialization rules or assigning those request to a Request Type and then include that Request Type as specializated rule, but this does not assure us that the request will be executed in that order.
Any suggestion?
Thanks a lot for your answer in advice.
Luis.

Hi Anchorage,
It could be a solution, but not the exact solution that we want. Let me say why.
With the Request set we have the security that each concurrent request is executed when the prior one finishes; is that to say 20, does not begin till 10 finishes, and 30 does not begin till 20 finishes and so on. The most critical concurrent requests are 40 and 50, cause those are the ones that import an external credit exposure in the OE_EXPORURE_INTERFACE table (40) and are the ones that delete those external credit exposures imported (50). The problem is (and we do not know why) that these actions makes grow the size of the table and each time the 40 and 50 processes takes more minutes to finish. That's why we need to truncate the table in order to avoid the excesive grow of itself.
Making each process independent, with a begining time and hoping and expecting that the following one does not begin till the prior one ends is not an admisible or realizable solution due to the problem with the 40 and 50 processes.
So at the end, we need a request set in order to know that each one began when the prior one ends.
And Due to in order to truncate the table, as I said before, the processes that have a relationship whit it, must be stopped (just the 40 and 50 processes) prior to the truncation.
So as you see, it is difficult, very difficult.
Regards.

How is it posible to get the File name, size and type from a File out the H

How is it posible to get the File name, size and type from a File out the HttpServletRequest. I want to upload a File from a client and save it on a server with the client name. I want to conrole before saving the name, type and size of the file.How is it posible to get the File name, size and type from a File out the HttpServletRequest.
form JSP
<form name="form" method="post" action="procesuploading.jsp" ENCTYPE="multipart/form-data">
File: <input type="file" name="filename"/
Path: <input type="text" readonly="" name="path" value="c:"/
Saveas: <input type="text" name="saveas"/>
<input name="submit" type="submit" value="Upload" />
</form>
proces JSP
<%@ page language="java" %>
<%@ page import="java.util.*" %>
<%@ page import="FileUploadBean" %>
<jsp:useBean id="TheBean" scope="page" class="FileUploadBean" />
<%
TheBean.doUpload(request);
%>
BEAN
import java.io.*;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
import javax.servlet.ServletInputStream;
public class FileUploadBean {
public void doUpload(HttpServletRequest request) throws IOException
          String melding = "";
          String filename = request.getParameter("saveas");
          String path = request.getParameter("path");
          PrintWriter pw = new PrintWriter(new BufferedWriter(new FileWriter("test.java")));
          ServletInputStream in = request.getInputStream();
          int i = in.read();
          System.out.println("filename:"+filename);
          System.out.println("path:"+path);
          while (i != -1)
               pw.print((char) i);
               i = in.read();
          pw.close();
}

Thanks it works great.
Here an excample from my code
import org.apache.commons.fileupload.*;
public class FileUploadBean extends Object implements java.io.Serializable{
String foutmelding = "geen";
String path;
String filename;
public boolean doUpload(HttpServletRequest request) throws IOException
     try
     // Create a new file upload handler
     FileUpload upload = new FileUpload();
     // Set upload parameters
     upload.setSizeMax(100000);
     upload.setSizeThreshold(100000000);
     upload.setRepositoryPath("/");
     // Parse the request
     List items = upload.parseRequest(request);
     // Process the uploaded fields
     Iterator iter = items.iterator();
     while (iter.hasNext())
     FileItem item = (FileItem) iter.next();
          if (item.isFormField())
               String stringitem = item.getString();
     else
          String filename = "";
               int temp = item.getName().lastIndexOf("\\");
               filename = item.getName().substring(temp,item.getName().length());
               File bestand = new File(path+filename);
               if(item.getSize() > SizeMax && SizeMax != -1){foutmelding = "bestand is te groot.";return false;}
               if(bestand.exists()){foutmelding ="bestand bestaat al";return false;}
               FileOutputStream fOut = new FileOutputStream(bestand);
               BufferedOutputStream bOut = new BufferedOutputStream(fOut);
               int bytesRead =0;
               byte[] data = item.get();
               bOut.write(data, 0 , data.length);
               bOut.close();
     catch(Exception e)
          System.out.println("er is een foutontstaan bij het opslaan de een bestand "+e);
          foutmelding = "Bestand opsturen is fout gegaan";
     return true;
     }

How to set the Selected row and Column in JTable

Hi,
i have a problem like the JTable having one Method getSelectedRow() and getSelectedColumn to know the Selected row and Column but if i want to explicitly set the Selected Row and Column,then there is no such type of Methods.If anybody has any solution then i will be thankful to him/her.
Praveen K Saxena

Is that what you're looking for? :myTable.getSelectionModel().setSelectionInterval(row, row);
myTable.getColumnModel().getSelectionModel().setSelectionInterval(column, column);

Step by step on how to set up email as output type

Hello everyone,
can someone pls help me with the configuration and the steps I have to do to set up email as output type for order confirmation, delivery and shipping. Also can you tell me the programs and forms I have to select from in the condition type. Do I need to get the ABAP guys involved and what do I ask of them, how finally is it interfaced with the email. Please give me step by step for the configuration and any other set up I have to do. I am working on ECC 6.0 and I need all the help I can get.
Thanks

Hi,
Please go through this link it will help you about Output process in SAP R/3 for sales documents and billing documents.
http://help.sap.com/saphelp_47x200/helpdata/en/93/745017546011d1a7020000e829fd11/frameset.htm
I hope it will help you,
Thanks,
Raja

Can't set long value when I type the value in

I don't work with long values much so I don't know if I'm missing something but I'm working on a Java program that needs to get the last modified dates from files and see if they've been updated since the last run. Well the date it returns is long. I set a long variable and when I tried to type in the value of a file I get an integer number too large error. This is a direct paste of the last modified date on one of the files. However, if I tell the variable to equal the files date it works fine. What am I missing?
        long oldTime = 1169806999093;
        File tempFile = new File("C:\\cygwin");
        oldTime = tempFile.lastModified();

You must tell the compiler that the thing on the right hand side is a long literal rather than an int literal:
long oldTime = 1169806999093LL; // notice the L at the end

When I open another Tab and type in a website address, after the site loads the URL in the navigation bar disappears. Why?

When I open a new tab and type in the website url, after the website loads the website url disappears. In order for me to get it to come back, I have to right click on the navigation bar and click undo. why is this?

Did this happen immediately after the reset or at a later time?
Does this only happen on a new tab?
What is the current setting for the new tab page as set via the browser.newtab.url pref?
You can open the <b>about:config</b> page via the location bar.
*http://kb.mozillazine.org/about:config
Rename or delete the prefs.js file and possible numbered prefs-##.js and user.js files to reset all prefs to the default value.
*http://kb.mozillazine.org/Preferences_not_saved
*http://kb.mozillazine.org/Resetting_preferences

Image size and type

what Icon / Image size and type we should use of our own menu ?
Giuseppe

Hi Giuseppe,
I'm not sure what restrictions there are on image type but I always use a 24bit Bitmap image with width 18px and height 14px. For transparency, set the background colour to RGB 192-220-192 and SBO will automatically make this area transparent, regardless of the colour scheme the user has on the client.
Kind Regards,
Owen

IPhone went bad after software update - iPhone 5 is now stuck on Itunes connect and has vertical lines

iPhone went bad after software update - iPhone 5 is now stuck on Itunes connect and has vertical lines.
I found a video on youtube with similar issues - http://youtu.be/Xuuqxx18-bA
EVERYTHING HAS BEEN TRIED: Restore, Reboot, Recycle, Replacing Cables, etc....
I don't have Apple Care, what to do? Spend more money and buy a new phone?

Here is another person who has a problem with the iPhone 5 screen https://www.youtube.com/watch?v=sc1ZPWSA8dc and they have just received them NEW!!!!!
I myself, two days ago purchased a 2nd hand iPhone 5 that was advertised as having a line of squares at the bottom of the screen. I Googled it and found people saying it was a screen issue and to replace the screen, so I did this and it is still happening with a new screen.
I am starting to dislike Apple intensely after reading forum posts and watching videos where people are asking for help and telling us about issues that they are having with their phones.
Why is Apple getting it so wrong with their updates and manufacturing that they are completely destroying iPhones that cost a lot of money and then expecting the owner to purchase another phone unless they are still in warranty.
Apple you should be going out of your way to put things right for people but instead there is a wall of silence over so many of the issues destroying peoples phones.
SHAME ON YOU!

Set up 4 squares and type vertically

Similar Messages

Maybe you are looking for