Set-up Airport Extreme 6thG

How do I set-up my Airport Extreme 6th generation with AT&T U-verse ARRIS NVG589 router?
Would this be a difficult task? Any help appreciated! Thanks

Please start another post for your question, as you have a different type of modem/router than the one in the original post.
Include the model number of the AirPort Extreme that you have.....it is on the bottom of the device, possibly embedded in the foam base and starts with an "A" followed by four numbers.  You might have A1143 if you have a 1st Gen AirPort Extreme.
We will also need to know what operating system that you have installed on your Mac or PC, or whether you are trying to use an iPhone or iPad for the setup.
The DSLReports article is totally unnecessary for what you want to do......the setup will only take a few minutes. Return the NVG589 to its original normal configuration as you received it from ATT.

Similar Messages

  • How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.

    How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.
    When Charter Tech goes to your site, have them connect the modem up, but do not connect the modem to your iMAC or MacBook Pro.  What you want to do is connect the Airport Extreme to the iMac or MacBook Pro first with the Ethernet Cable. You have to do this to configure via Airport Utility to set up the Base Station Name & Base Station Password.
    You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple Tv, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
    Wireless Security will be -> WPA/WPA2 personal or just WPA2
    Enter the Wireless Password you want
    Verify the Wireless Password (enter it again)
    After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
    Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
    Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
    about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow.  Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
    For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green.  If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
    If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
    The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green.  Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.
    WHAT TO DO IF YOUR AIRPORT EXTREME WAS PREVIOUSLY SET UP FOR USE WITH ANOTHER CARRIERS ROUTER OR MODEM.
    NOTE:  If you already had your Airport Extreme connected for example, I previously had ATT Uverse and the Airport Extreme was connected to the Wireless Router Model 3801HGV, I disabled the Uverse Wireless and used the Airport Extreme for the Wireless signal in bridge mode, as the Airport extreme Signal is much stronger than the Uverse router, and I was able to obtain a Wireless signal with the Airport Extreme way much better with no signal loss which was very very frustrating with the Uverse router.
    Anyhow if you had it hooked up like this, now that you will be using it with the Charter ARRIS Modem TM902A, you will need to reset the Airport Extreme to clear out the old data it has in memory, with the previous set up otherwise it will not work. Trust me I spent 6 hours trying to make it work reading all Apple Support Community questions and answers relating to this type issue/problem others have been having trying to get their set up working. I tried all the tips, and I finally decided just to see if by chance I would be able to connect with someone with Charter Tech support who might be familiar with Apple to be able to assist me and by luck I did.  He told me why it was not working and was all due the previous configuration with the ATT Uverse router was still in memory with the Airport Extreme. Finally it was 10:30 PM when I decided to call Charter Tech Support and I had been working on this since 3:00 pm pacific. I did not call them earlier as all the post I read said they never received any good help from Charter. After calling them I finished up by 11:00 PM and was able to finally connect Apple Tv, iMac, iPhones and Macbook Pro. We love our Apple Product and Happy all is connected with the new
    Internet Provider Charter. I must say the speed is way way much better than it ever was with AT&T Uverse. 
    THIS IS WHAT YOU WILL NEED TO DO:
    First you will need to unplug the Airport Extreme, then by taking the tip of a pen or paper clip end you need to push the reset button on the back of the Airport Extreme and hold it
    down and at the same time plug the power cord back into the Airport Extreme count to 5 or 10 then release the reset button. Then once he light in front of the Airport Extreme stops blinking you need to plug the Ethernet cable from the Airport Extreme to your iMAC or Macbook Pro, and restart which ever one you have, then open the Airport Utility once it is back up.  If you see airport extreme pop up with the old network name or it shows and yellow triangle click on the Airport Extreme ICON it will not let you configure it but will ask if you want to get rid of it or remove and just do it.  Then Again restart your iMAC or MacBook Pro, open up Airport Utility again, and on the top left you should see under “Other Airport Base Stations” the MAC ID for the Airport Extreme.
    You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple TV, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
    Wireless Security will be -> WPA/WPA2 personal or just WPA2
    Enter the Wireless Password you want
    Verify the Wireless Password (enter it again)
    After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
    Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
    Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
    about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow.  Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
    For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green.  If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
    If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
    The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green.  Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.

    I just got a Charter Modem. Model TM822. While I was moving, my Airport Extreme was still at my old place.
    I have a Linksys WRT320N I used for the initial Charter setup.
    I can get my Airport to work here, but the Internet light on the Modem flashes Yellow.
    Hasn't caused any issues so far but one thing I did notice.
    On the Linksys there were 3 DNS servers listed.
    The Airport Extreme only lists 2 and i don't see where I could add another, only change whats already there.
    I tried everything above, but light on modem still flashes yellow.
    I have the technicians cell phone. Told me "that shouldn't be" and gave the same advice listed above.
    I'll break down and call Charter one day, see if it's on their end. NSA tracking may need a reset LMAO.

  • How to set up Airport Extreme for 11ac and 11n?

    I have just purchased the new Airport Extreme (August 2014) because Apple's website states
    Simultaneous dual-band support.
    AirPort Extreme features simultaneous dual-band 802.11ac Wi‑Fi. That means it transmits at both the 2.4GHz and 5GHz frequencies at the same time. So no matter which band your wireless devices use, they’ll automatically connect to the best available band for the fastest possible performance.
    I have number of Macs in my home from a new MacBook Pro with Mavericks to a Macbook Air with Snow Leopard (due to required software) and iPads.
    So after setting up the new Extreme my new MacBook only accesses 11n as does my older Macs. I checked by holding down the option key while clicking the WiFi icon at the top of my Mac. Well, not so automatic then as I was expecting 11ac and 3 times faster access (as stated by Apple).
    I then looked for some documentation for setting up but cannot find anything.
    Hence my question here.
    How to set up Airport Extreme for 11ac and 11n simultaneously?
    At present the new Extreme is no better than my previous 2 year old one.
    Thank you.
    Michael

    How to set up Airport Extreme for 11ac and 11n simultaneously?
    Assuming that it is operating correctly, 802.11ac and 802.11b/g/n are broadcast simultaneously by default.
    Simultaneous dual-band support.
    AirPort Extreme features simultaneous dual-band 802.11ac Wi‑Fi. That means it transmits at both the 2.4GHz and 5GHz frequencies at the same time. So no matter which band your wireless devices use, they’ll automatically connect to the best available band for the fastest possible performance.
    That is advertising. The real information is usually found in the small and hard to read footnotes:
    Based on theoretical peak speeds. Actual speeds will be lower.
    AirPort Extreme is based on an IEEE 802.11ac draft specification. Performance based on comparison with Apple’s 802.11n products. Comparison assumes AirPort Extreme network with 802.11ac-enabled computer. Speed and range will be less if an 802.11a/b/g product joins the network. Accessing the wireless network requires a Wi‑Fi-enabled device. Actual speed will vary based on range, connection rate, site conditions, size of network, and other factors. Range will vary with site conditions.
    Since the 802.11ac signal is being broadcast only using the 5 GHz band, some users report that they have had better results by using the option to assign a different name to the 5 GHz band, and then pointing their Mac to that specific signal or network. You may want to try that option.
    But first as a test, please locate the MacBook Pro about 10-15 feet or 3-4 meters from the AirPort Extreme with clear line-of-sight between the two devices. Restart both the AirPort Extreme and the Macbook Pro and then check to see if the Mac is connected to an 802.11ac signal.
    If not, please power off your other wireless devices...computers, mobile devices, etc. temporarily, and try the same test again.
    Please report on your results.

  • Set the Airport Extreme to not broadcast the SSID

    Set the Airport Extreme to not broadcast the SSID

    "Hiding" the SSID will do nothing to protect you from hackers.....and anyone else who wants to see your network, since there a numerous free utilities on the Internet that will reveal your network in seconds.
    On the other hand, it might keep a few honest neighbors from seeing the name of your wireless network.
    iOS devices often have trouble connecting to a "hidden" network, so you may need to display the network if your iPhone, iPad, etc have trouble connecting to the network.
    Your call on this.
    Assuming that you have Lion, Mountain Lion or Mavericks on your MacBook Pro.....
    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Click on the AirPort Extreme icon, then click Edit in the smaller window
    Click the Wireless tab at the top of the next window
    Click Wireless Options at the bottom of the window
    Enter a check mark in the box next to Create Hidden Network
    Click Save, then click Update and allow a full minute for the AirPort Extreme to restart

  • Hi having trouble setting my airport extreme for guests?

    hi having trouble setting my airport extreme for guests?

    This is likely because you have the AirPort Extreme connected to a modem/router, or gateway device.....and not a simple modem. Can you provide the make and model number of your "modem", as we previously asked?

  • Having trouble setting my airport extreme for guests

    hi having trouble setting my airport extreme for guests?

    Please see your other post on exactly the same subject.

  • Trying to set up airport extreme. Blinking amber light but airport utility says no configured base stations have been found. Have unplugged base and reset.

    I have tried to set up airport extreme base stations but keep getting blinking amber lights. Have unplugged and reset. No base station prompt noted in the airport utility window. Internet connetion noted (Green light under globe icon)

    Are you using 6.0 here?
    What kind of AEXT are you using?

  • How to set up airport extreme with TPG ADSL2 ?

    How to set up airport extreme with TPG ADSL2 ?

    I just got a Charter Modem. Model TM822. While I was moving, my Airport Extreme was still at my old place.
    I have a Linksys WRT320N I used for the initial Charter setup.
    I can get my Airport to work here, but the Internet light on the Modem flashes Yellow.
    Hasn't caused any issues so far but one thing I did notice.
    On the Linksys there were 3 DNS servers listed.
    The Airport Extreme only lists 2 and i don't see where I could add another, only change whats already there.
    I tried everything above, but light on modem still flashes yellow.
    I have the technicians cell phone. Told me "that shouldn't be" and gave the same advice listed above.
    I'll break down and call Charter one day, see if it's on their end. NSA tracking may need a reset LMAO.

  • How do I set up Airport Extreme with cable modem and router?

    Hi--
    I'm having a house built and all of the wiring for TV, phone, and internet will be centralized in a closet. The cable modem can be placed there as well. In one room in the basement I want to use my Airport Extreme for my iMac and USB external hard drives. In another location of the basement, I'd like to set up a Time Capsule for another desktop and USB printer. If the cat5e comes out of the wall at each location, I "think" I need a router at the closet location. I also thought I might need an Airport Express upstairs on first or second floor to boost signal for my laptop. The house isn't that big so maybe that's overkill. So beyond the router question, do I want to set up a roaming network and have the Airport Express connected via ethernet or just wireless if the thought is that I need this? Finally, if I should connect cable modem to router to Airport Extreme, Time Capsule, etc., in what order and ports does the equipment get connected? Many thanks!!

    Welcome to the discussions, Forum Girl!
    It would be best to position the cable modem and main router in the central location like the closet if possible. The other devices would connect via ethernet to the wall jacks in each room.
    If you could setup a "roaming" wireless network as you mention, this will give you better wireless performance and coverage. This is the way commercial establishments like airports, businesses, etc. are configured for wireless.
    The order of connection would go something like this: ethernet connection > cable modem >main router>devices. Devices could be computers, routers, a backup device, etc. Since the Extreme has only 3 LAN ports for ethernet connections, you will also need to plan to install an "ethernet switch" near the location of the main router to provide enough ethernet jacks. If you are planning to use DirectTV, etc or your audio/video devices require ethernet connections (most new products do for updates and extra features), be sure to plan for that as well.
    Make sure that CAT5e or CAT6 wiring is run so you will be able to take advantage of faster gigabit speeds.
    Finally, it would be a good idea to work with an IT specialist to go over your plans to make sure all the bases are covered. This would be money well spent.

  • How do I Set up airport extreme with existing fios wireles network

    Hello al, l I have an existing wireless network with an arcitonic  wireless router provider with my fios tv. Everything is working well. Now I want to add airport extreme to increase my network range and later add apple tv /net flicks  I,m not great with this stuff. Some wold be great.

    You will need to establish a permanent Ethernet cable connection from one of the LAN <-> ports on the Fios router to the WAN port (circle of dots icon) on the AirPort Extreme and then configure the AriPort Extreme to "Create a wireless network".
    You can configure the AirPort Extreme to provide another separate wireless network if you wish, or if you assign the same wireless network name, and use the same security setting and password that the Fios is using, the Extreme will provide more wireless coverage....and you won't have to change wireless networks to connect to the wireless on the Extreme.
    Follow the guided setup using AirPort Utility to "create a wireless network". The setup will suggest that you configure the AirPort Extreme in Bridge Mode, which would be the correct setting when used with the Fios router.

  • Setting up airport extremes with mobile netbook cart

    I work in a school environment, running windows.  We have four mobile carts in the high school.  We have an airport extreme for each of the carts.  In our situation, the airport extremes are mobile.  They do not stay in one location all the time.  The teachers connect the airports to a wired connection in their classrooms.  We have the netbooks set up to automatically connect to an airport when in range.  I have each of the airports setup the same way; create a wireless network, each has it's own network name, radio mode is automatic, channel selection is automatic. Internet options are connect using ethernet, connection sharing is off (bridge mode) and tcp/ip is static.  There are a couple of issues we seem to be having.  One is that the airport with the stronger signal is not always the one the netbook connects to.  I could have one classroom of netbooks connecting to an airport that is located two classrooms down the hall when there is airport in the classroom that has a stronger signal. What could be causing this?  We push out settings to the netbooks via group policy, such as redirected desktop and network shares.  When a user logs in they don't seem to get the whole policy all of the time.  If you restart or logoff then login, the netbook gets the policy correctly.  Could this be a problem when multiple airports are in range of the netbook trying to access the network?  Is having the airports mobile, moving from one room to the next, a bad idea?  Thanks for the help.

    tried this but it didnt work that well, the distance between the main airport and the extenders is too long. Also, when choosing extending, it came bugging me with incorrect dhcp settings. Couldn't solve that.
    So i configured allt he extremes with creating a wireless network, same ssid and same wpa settings. Als bridgedsetting is disabled.
    That seems to work. Anyone with an opinion about this configuration?

  • How to get WAN DNS when set up Airport Extreme on Windows

    I am trying to set up my home network by using Airport Extreme Base to connect DSL via PPPoE. Here's what I did:
    1. Update firmware to latest version: V5.7;
    2. Install Airport Setup 4.2;
    3. Run Setup Assistant, enter the right DSL account and password by using PPPoE, also setup base name, network name and base password, and DSL service provider's DNS ip, backup DNS ip;
    4. Everything gets updated into base station, restarted, local wireless network set up successfully, but can not connect to WAN;
    5. Tried ipconfig/all, find DNS is 192.168.1.1;
    6. Tried to dial DSL from computer via PPPoE directly, validated account and password is ok, and it is working well to get me to internet.
    Can someone here help me solve my issue?
    Dell D600 Windows XP Pro

    I figure out answer by myself now. I would like to share it with you all here: firmware V5.7 has some major bug causes the problem. When I update my base station with firmware V5.5.1, it works right away.

  • Having trouble setting up Airport Extreme Base Sation

    Hi,
    I'm new to a wireless set up for my Mac.
    Initially I tried to set up entering various passwords along the way and discovered my cables were not connected correctly - I rectified this and tried again.
    I was then encouraged to proceed via Bridge mode which I did and eventually got a confirmation that set up was complete.  However my light on the Airport Extreme went from solid green to a slow amber flash and I was made aware of 2 problems by AirPort utility 1) Your Apple Wi-Fi base station does not have a valid IP address   2)  This Apple Wi-Fi base station doesn't have any DNS server addresses and might have trouble connecting to the internet
    Despite this I am connected wirelessly to the internet and so wondered how, or if I need to, solve these two problems?
    Thanks for any help on this

    Update
    I skipped the problems and updated anyway - It then came back with the 2nd problem and a few moments later said this was resolved.  I still had amber light but after starting AirPort Utility a couple of times I eventually got a solid green light and no reported problems.

  • How to set up Airport Extreme in a Hotel?

    Hi guys,
    i'm living in a hotel for about a month or so and i don't like the hotel's wireless internet (it's at a Hilton Garden Inn) so i decided to buy this Airport Extreme so i could have a better connection. I like to play xbox 360 also and the lag on the games kills me. Any type of help would help me, as i am not tech savvy. What i'm really getting at is that i want to use my Airport extreme as the place where i get my internet from and where i can play xbox on if that makes any sense?

    Tesserax has you on the right path.
    IF...the hotel is trying to charge you for each device that connects, you could try changing the Connection Sharing setting to "Share a public IP address". You'll need to click "ignore" to the warning that you will likely receive about a Double NAT on the network.
    If you are playing games online, the console will probably not like the Double NAT setting at all. But, it's worth a try if the Bridge Mode setting wants to charge for each separate device that connects.

  • How can I set up airport extreme using my existing 11.g router

    My existing router (ZyXEL - supplied by Telefonica with my land line) is an 11.g type and does not allow me to use iPad/iPod in certain areas of my home.  Yesterday I bought an Airport Extreme and was told that I could either connect my existing router's ADSL line directly into the Extreme and connect to my Mac and other peripherals using USB or ethernet cable, or connect from the existing router. 
    I tried each method using Airport Utility in each case and also trying the different options offered in the set-up.  It doesn't seem to want to work.
    Can anyone help me please.

    Further to my earlier (and first) posting, I have been playing with the airport extreme and it now works via my existing router but, it's range is less than 15 metres and that is no better than my existing 11.g router. 
    Does anyone know how I can increase this range?
    p.s. any help in the simplest terms please.

Maybe you are looking for