Set up and check Display resolution of the Red Hat Linux 5

i am going to install oracle 11g and i wanted to check resolution configured of the server . so i used folowing commands after connecting through Xstart
#export DISPLAY=BAA16726:0.0
# xrandr |grep '*'
but it givng me the following error..
“Xlib: extension "RANDR" missing on display "BAA16726:0.0".”
According to oracle installation guidline they addvice to to folowing steps to setup Display
#export DISPLAY= localhost(BAA16726):0.0
#xhost + servername.us.example.com
should i setup this from user oracle before start installation??
if some one can clear my doubt would be appriciated.

hello
please try
connect clean terminal with root user
then xhost +
then su - oracle
then setup
regards

Similar Messages

Guide for Tuning and Optimizing Red Hat Linux AS for Oracle9i Database

I put together a step-by-step guide for tuning and optimizing Red Hat Linux Advanced Server for Oracle9i. It's my first draft version and I would appreciate any comments and feedback.
The article
"Tuning and Optimizing Red Hat Linux Advanced Server for Oracle9i Database"
can be found at:
http://www.puschitz.com/TuningLinuxForOracle.shtml
The article
"Oracle 9i Installation on Red Hat Linux 7.1, 7.2, 7.3, 8.0, and on Red Hat Advanced Server 2.1"
can now be found at http://www.puschitz.com/InstallingOracle9i.shtml
And both links for
"Oracle on Red Hat Linux"
can be found at
http://www.puschitz.com/OracleOnLinux.shtml
Werner

Is this good for Redhat Linux 9.0 and not just the advanced server.
If it is not could you please provide me the links to articles like,
"Guide for Tuning and Optimizing Red Hat Linux for Oracle9i Database"
"Guide for Tuning and Optimizing Red Hat Linux for Oracle9i App Server"
"Guide for Tuning and Optimizing Red Hat Linux for Oracle9i Infrastucture"
Thanks.

A few days ago my TV show and movie displays went whacky-the shows are no longer in alpha order, there are multiple listings of the same show, the pictures are random-including album covers. I downloaded latest version. Any ideas??

A few days ago my TV show and movie displays went whacky-the shows are no longer in alpha order, there are multiple listings of the same show, the pictures are random-including album covers. I downloaded latest version & no change. Any ideas??

ME TOO.
I think mine are all still in alphabetical order, but :
* movies I deleted from my library and told "hide this purchase in the cloud" are showing up again. If I try to play them, I get the "cannot find the file in its proper location, would you like to locate it" error message.
* for movies that have "iTunes Extras," the extras show up as a separate item, with another copy of the movie artwork. Most of these I believe I had DELETED the "iTunes Extras" anyway.
* Items are showing up multiple times.
* A few MUSIC ALBUMS are listed in my Movies section.
* Some movies (I believe ones that I deleted off my HD but are still in the cloud) are showing random album covers instead of their proper artwork.
* Just rented a movie, and it didn't show up anywhere in my library. It downloaded properly and completely, was in a suitably labeled folder in my iTunes/Media/Movies section, but didn't show up in any section of the library (or via a library search). Had to manually find it and tell it to open the file using iTunes.
Running the latest version, even checked for updates. No other changes made lately since the last round of apple software updates. This was wonky before the latest small update to iTunes - now it's even wonkier. And it is very, VERY effing annoying.

Apple TV - i'd like to watch what i paused. The system says i have to go to itunes and 'check for downloads.' The wheel keeps spinning..... the system won't let me rent again.

Apple TV - i'd like to watch what i paused. The system says i have to go to itunes and 'check for downloads.' The wheel keeps spinning..... the system won't let me rent again.

Question is a bit unclear. Once you start a rental, you have 24 hours to complete it. I pause mine all the time. When I hit play again, I get a choice to either resume where I left off or start all over. I believe it is necessary to have an internet connection while view ATV content, so if you lost the connection, that might make it "spin".
Re your tag line "Can I view my ATV thru my iPad?" If you have a wifi connection, you can view almost anything with AirPlay. Or you can view anything from the various ATV selections without having your iPad on. Of course, you have to pay for some options like HBO, Netflix, etc.

I want to have different headers in Pages. I want to be able to set them and not have them be the same. For example I want ii then iii and so on...How do I do that?

I want to have different headers in Pages. I want to be able to set them and not have them be the same. For example I want ii then iii and so on...How do I do that?

Hi BelleDesign,
"Headers" is short for "Continuing Headers."
Use a Header when you want recurring information on a series of pages in your document.
If ii, iii, etc. are page numbers, you can place them in Headers using Insert > Page Number, then formatting the page number to lower case Roman numerals.
For more on Headers and Footers, see Chapter 3, Working with document parts in the Pages '09 User Guide, available for download via the Help menu in Pages. Discussion of Headers and Footers starts on Page 54.
Regards,
Barry

HT1363 after pressing Menu and Select, when the Apple sign appears, I immediately press select and play/pause, but again the red X sign appears. so it does not go to Disk Mode. Has anyone had this issue? I would be grateful if you could tell me what to do

The red X has appeared in my Ipod Classic Screen. Apple support tells me that I need to first put it manually on disk mode. to put it on disk mode I ought to press menu and select buton togeher, when the apple sign shows up, hold select button and play together.
After pressing Menu and Select, when the Apple sign appears, I immediately press select and play/pause, but again the red X sign appears. so it does not go to Disk Mode. Has anyone had this issue? I would be grateful if you could tell me what to do.

Thank you everyone for the replies. It defiantly helped point me in the right direction. With any luck, I will have my replacement phone sometime tomorrow.
I was able to call the iPhone support line this morning. The Apple rep stayed on the line with me for about an hour until he was sure the new phone would ship out. For $199 plus $29 for expedited handling I was able to get the replacement ordered with overnight shipping. Since the replacement doesn’t involve ATT&T I have no reason to suspect any further delays. Kudos to the Apple rep that helped me straighten out this mess.
It’s a shame that AT&T cares so little for their existing customers. Not only did they try to sell me the same phone for $499, they outright refused to help me. They also lied to me on numerous occasions and strung me along for close to three weeks for something that only took an hour to complete with the Apple rep.
I filed a formal complaint against AT&T through the Better Business Burrow as well as requested a review of our cooperate contract with AT&T. Our company currently has over 3000 phones with AT&T and there contract comes up for bid the end of our fiscal year (this October). We will be giving it heavy consideration before we consider renewing their contract.
I doubt that any of that will matter to a company that cares so little about their customers, but you never know.
Thanks again for all your help. I would probably still be trying to get my replacement for the next few months if it wasn’t for your suggestions.
-Niel

Installing 11i apps on windows xp and Red Hat linux AS 3.0

Hi,
I am a newbie to Oracle E-business suite............i will be very helpful if anybody could help me with the full procedure on how to install Oracle apps on windows on Windows XP and Red Hat linux AS 3.0.........starting with configuring ip.....i would really appreciate if somebody helps me out...........well thanks in advance..waiting for a optmistic reply...
Thanks again,
Virendra

I have done installation on XP and 2000 servers are heres the steps... detailed ones. I also request those who install Oracle Apps 11i to first read the installtion pdf's which helps you understand clearly the prerequisites overall.
You cannot find the Pre installtion steps(such as Mks Toolkit and GNUMake config) in more clear terms from those documents.Which are explained here.
The Must PDF's to refer before installation
1)r1152ins.pdf
2)11iconcepts.pdf
According to the 11iconcepts PDF you can decide your business needs the N-Tier Architecture and Database Server and Application Tier Server File System in a very clear terms.
The installation process can be divided into
Pre Installtion,Installation and Post-Installation stages.
I would caution everyone to concentrate more on Pre Installation stage and which is more critical for a successfull installtion of Oracle Apps and to be free with later cropping up problems.
Further before moving into Installtion stages i have to Explain the Number of CD's and Installtion type's in Oracle App's.
In many places you may need to wait patiently even more than 10 minutes for screens(Dialog Boxes) to appear dont conclude prematurely some problem on system.
In oracle Apps 11.5.1 it consist of 12 CD's.
1) Start Here CD(RAPID Installation Wizard)
2)1-11 CD's
1-3 Application Top information
4th Oracle DB
5-6 IAS and other tools
7-11 Oracle Apps DB.
You have to decide whether you are going to do a Single Node Installation(No Post-Installation Task) or Multi Node Installation. Refer(r1152ins.pdf)
While installing for Multi Node you can see the Installation locations to be mentioned as
Appl_Top,Common_Top,Data_Top etc.Try to install Appl_top and common_Top in one drive and Data_Top in another Drive(Single Node) and in different nodes in Multi Node installation.
Installation Types
Production ==>Real time Env implementation's
Test ==>For test Env Purposes
Vision Demo==>R&D or learning Purposes.
Pre-Installation steps
======================
Space Requirement for types of installtions
Install VC++
How to Download and install MKS tool Kit
How to Download and Configure GNUMAKE
Env path setting
Create Applmgr user in Win2000
Space Requirement for types installtion:
Memory Requirement
1 GB of RAM(512 Fine for initial Installtion)
but planned for more user connections another 1 GB of Ram and according to the number of user's and Application needs you have to Increase the Memory.
HDD capacity
APP_Top(A)
COMMON_TOP(C)
DATA_TOP(D)
Test DB : 22 + 20 GB (60 GB recommended)
Prod DB : 22 + 20 GB (60 GB recommended)
Vision Demo DB: 22 + 35 GB (80 GB recommended).
Plus space for ur staging area.
This are the actuall space required for the Oracle Apps Alone plan for more space for future needs etc.
Softwares on System
Win2000 server with Patch1,Winzip and Acrobat Reader Latest version etc.
Install VC++:
Install a clean installtion of VC++ of Visual Studio Family 6.0
It should be first installed before installing MKS or GNUMAKE
NOTE: When Visual C++ is installed, let the installer register all environment variables. This will allow executables to be linked from the command line.
How to Download and install MKS tool Kit:
Note:Try to purchase the MKS tool kit from the below site.
or try to download the trial version valid for a months time.
http://www.mkssoftware.com/products/tk/ds_tkio.asp
Evaluation copy from
http://www.mkssoftware.com/eval/
Choose "MKS Toolkit for Interoperability " Download it in C:\
Again you have to click the downloaded kit to start the actual download of 38 MB of MKS tollkit Evaluation version.
You will be sent a Demo serial number to your mail id==>copy the same to a Notepad on your desktop.
Now start the installtion of the MKSToolkit on your system by clicking on the MKStoolkit downloaded.
It will prompt you for the Demo serial number which has to be provided.
The MKStoolkit will be successfully installed.
How to Download and Configure GNUMAKE:
1) HOW TO GET AND INSTALL GNUMAKE ON WINDOWS2000
This can be done by performing the following steps:
NOTE: Please, be aware that you must install Visual C++ BEFORE installing GNUMAKE, because its installation process involves linking executables.
1) Before downloading GNUMAKE, you will need to acquire some utilities which will be used for unpacking files. You can obtain the required utilities at the following
URL: ftp://ftp.gnu.org/gnu/windows/emacs/utilities/i386/
The directory contains the following files:
README
djtarnt.exe
gunzip-1.2.4-i386.exe
gzip-1.2.4-i386.exe
tar-1.11.2-i386.exe
tar-1.11.2a.exe
Only two of the files are required:
gunzip-1.2.4-i386.exe and tar-1.11.2a.exe
2) After downloading the above files, rename them as follows:
gunzip-1.2.4-i386.exe => gunzip.exe
tar-1.11.2a.exe => tar.exe
Place them into a directory that you can set in you PATH environment variable.
3) Point your browser to the following
URL: ftp://ftp.gnu.org/gnu/make
The files needed from this directory are:
make-3.77.tar.gz
make-3.78.1.tar.gz
make-3.79.1.tar.gz
make-3.79.tar.gz
Development requires to install version 3.77 or above. Downloading the latest version is perhaps best decision, but there are advantages to downloading the version required by development (3.77). (This document assumes that version 3.77 has been downloaded) (NOTE: AVOID USING SPACES IN
DIRECTORY AND FILE NAMES. GNUMAKE,VISUAL C++, ETC. DO NOT ALWAYS DEAL WELL WITH SPACES)
4) For instance, suppose you have downloaded file make-3.77.tar.gz on a directory called C:\GNUMAKE, unpack this file using gunzip.exe from a Command Prompt Window
Example: C:\GNUMAKE>gunzip make-3.77.tar.gz This last action, will expand file make-3.77.tar.gz and the extension .gz will be removed.
5) On the same Command Prompt Window, you should UnTAR the file, with the following
command: C:\GNUMAKE>tar -xvf make-3.77.tar This will create a new subdirectory called MAKE-3.77 under C:\GNUMAKE, the original directory.
6) In the new subdirectory, there is a batch file
called build_w32.bat; run the batch file to generate GNUMAKE.EXE
Try this from Command Prompt more than once if succesfully not built message appers till you get Generated successfully.
Note:If Possible run all the bat files in the MAKE-3.77 and also config.bat in the sub directory by double clicking it.
WARNING: There is a known issue with this last step, "GNU make fails to build regardless of chosing build_w32 or nmake"
See [NOTE:115937.1]
for work around. RELATED DOCUMENTS ----------------- For Microsoft Visual C++, MKS Toolkit and
GNUMAKE support, you should contact their respective vendors Microsoft Visual C++, MKS Toolkit
and GNUMAKE are registered trademarks.
http://support.microsoft.com/ http://msdn.microsoft.com/ http://www.mks.com/
http://www.gnu.org/ Note:104010.1: Release 11i on NT: Software Requirements
Note:115937.1: GNU Make won't make on windows NT
Important:All the downloaded files from GNU makes web sites shall be put in a single folder called gnumake under c:\ .Try to search for config.bat file inside this folders just click and
run it.
Env path setting:
Try to search make.exe generated in c:\program files\mkstoolkit\mksnt and copy and paste it
c:\gnumake\MAKE-3.77\windebug and c:\gnumake\MAKE-3.77\winRel also paste both this paths in the
My Computers==>Properties==>Advanced==>Environment variables==>Path setting's
After all this check as follows from CMD mode.
1)execute make at c:\>
2)execute gnumake at c:\>
In win2000 it may return error messages or Target wrong ignore it.If it is on Win NT then it will return proper status.
Create Applmgr user in Win2000:
Create a Applmgr user account in win2000 .
Installation:
=============
What here you require is the Patience .
Load the START HERE CD and run the C:\> cd \cdrom\rapidwiz
For Test and Prod it will ask for the location of Appl_Top,Common_Top and Data_Top location. Mention there path and ensure if more than one installtion say eg.Vision and Test or Prod to check the Path in all the tab pages its corresponding values and path's.
In Vision Demo many of the Options are not propmted from the user.
It will then do the system checking for Host Name and other details.All the checking should have been passed or if failed it will mark it in RED cross mark.Rectify the mistake and then onceagain proceed or else you will have problem after installation.
The Installation time takes around 5 to 6 Hrs of time.
For info on Post installation or on Multi Node follow the pdf's i have mentioned above.
The most tedious of all is succesfully crossing the Apps system checking it does for all
installed products it requires without any failure.
The GNUMAKE configuration or steps were nowhere given and it was all our trail and error exp.
This is possibly the most elaborate steps to install Apps on Win. post for further help. email me at [email protected] or [email protected]
Rajeev.

Memory Problem with Oracle10g R2 and red Hat linux 2.4.21-37.EL

Hi All.
i've a 64Bit red Hat Linux 2.4.21-37.EL , 5GB Ram , 3GB Swap Space.
Oracle10g R2. i've 2 prodection database each is having 1400MB of SGA.
when i check the free meory it shows only 12mb of ram is free..why..?
and in swap space it's only 200mb is used...why..?
when i check the dbwither is taking 1.2GB of RAM why..?
can anybody help me in this ...how to get free memory or configure os level to get more free memory.
Sarit
[email protected]

Linux uses Swap space to run applications. The RAM available may not be enough to run the applications so OS swaps the program between RAM and the swap space to run applications.
You can see your swap partition being used as the swap space with:
cat /proc/swaps
Regards,
Senthil Murugan

Oracle 9i manual database creation on the Red Hat 9 Linux

I installed Oracle 9I on the Red Hat 9 Linux successfully with automatic database creation.
I tried to create second database manually and everything seemed to be fine until I issued create database statement. I got the following error:
ERROR at line 1
ORA-01092: ORACLE instance terminated. Disconnection forced.
Please help me to solve the problem.
Thank you,

Ok I am having the same exact problem and I am typing this into the shell before I run the installer.
export DISPLAY=yourdesktop:0.0
I thought that would fix the problem but it still hangs and gives the same message as the other guy gets. How can I solve this problem and get the installer running? I would really appreciate any help. This is the message I get:
[oracle@localhost linux]$ ./runInstaller
Initializing Java Virtual Machine from /tmp/OraInstall2003-08-02_10-09-53PM/jre/bin/java. Please wait...
Xlib: connection to ":0.0" refused by server
Xlib: No protocol specified
Exception in thread "main" java.lang.InternalError: Can't connect to X11 window server using ':0.0' as the value of the DISPLAY variable.
at sun.awt.X11GraphicsEnvironment.initDisplay(Native Method)
at sun.awt.X11GraphicsEnvironment.<clinit>(X11GraphicsEnvironment.java:59)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:120)
at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(GraphicsEnvironment.java:58)
at java.awt.Window.<init>(Window.java:188)
at java.awt.Frame.<init>(Frame.java:315)
at java.awt.Frame.<init>(Frame.java:262)
at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:593)
[oracle@localhost linux]$

ORA-01017: OS Authentication on Red Hat Linux 6.2 and Oracle 11gR2

Hello
I am trying to eanble OS Authentication on Oracle 11.2.0.3 installed on a Red Hat Linux Server 6.2 and it just does not work. When I try to login I always get the error ORA-01017: invalid username/password; logon denied
I have set the following Oracle parameters:
remote_os_authent = TRUE
os_authent_prefix = OPS$
and i have created a linux user "oracle" and the Oracle user "OPS$oracle".
I know that the parameter remote_os_authent in 11g is depricated but i thought that it still should work, just an error messages occures then i start the database but it runs as usual, just the OS Authentication does not seem to work.
Does anyone knwo where the problem could be?
Oracle said that remote_os_authent is depricated because as it is risky, i know that, but my database is in a secure environment without any connection to the internet. What other way would there be without using remote_os_authent?
Thank you very much for your help.
Regards Bernhard

Thanks for the link, i found that i used a case sensitive user name as i created the user with "OPS$USERNAME" and this was why i cound not connect with that user.

Install forms6i and report 6i on Red Hat Linux Enterprise edition 4.0.2

Dear All
we want to install forms 6i and reports 6i on Red Hat linux enterprise edition 4.0.2
if any person have step by step guide pl share with me
Thanks

such an old forms version on Red Hat 4 ? Please check first, if this is certified by Oracle
metalink.oracle.com - Region Certifications
can't you use the new Oracle Forms 10g ?

Red Hat Linux Enterprise 5 64bit and Enterprise Manager 10.2.0.3 Install ?

Appreciate specific steps to ensure that Oracle Enterprise Manager 10.2.0.3 is installed as baseline for upgrade.
Red Hat Linux Enterprise 5.2 64bit.
The major problems are with the Configuration Assistant Web Cache during the Install. It fails with OUI-25031.
The configToolFailedCommands script contents is:
oracle.sysman.emcp.agent.AgentPlugIn

The root cause of Oracle Grid 10.2.0.3 did not install successfully was because of a Network Configuration Issue. i.e., some strange IP was being referenced over the internet and mapping it to my hostname of my server. I performed a "dig hostname" to see what ip was being associated with my so-called unique hostname. After fixing that problem and removing all of Oracle, I only had one warning with OPMN not starting. I discovered additional rpms that needed to be installed and all is good now until the next opportunity.
Learned Lesson: Pay Very Careful Attention to all configuration components and document as you go to ensure that you have your process documented.

Oracle 8i/9i and Red Hat Linux version

Hi,
Does anyone know, which is the earliest version of Red Hat Linux
supported by Oracle 8i or 9i?
Regards

Hi,
I downloaded the 9i, the installation started ok and I was
able to complete the install procedure, but a few things did not
go as I planned:
1.- The installation MUST be run on the console X, and cannot
be run from a remote terminal (odd!).
2.- On a 2-CPU machine the installation didn't install all the
files for the sistem to start.
3.- During a second attempt the installer issued an error
regarding a compilation problem.
Can anyone help me, I can't get the installer running without
problems.

How can I build and run CDC in Red Hat Linux?

I downloaded the CDC and CVM(j2me_cdc_fp-1_0_2-src.zip), and wanted to build a VM in Red Hat Linux. But I can't find the Makefile in the "build" directory. How can I build it?

You should be able to run a J2SE VM with the CDC jar as the bootclasspath, I think.

How to install and configure ASM on Red Hat Linux 6.4

Hi Team,
How do you install and configure ASM on Red Hat Linux 6.4?
Thank you in advance.
Bee

Here is an article that you may find useful http://eriglen.blogspot.com/2013/01/step-by-step-configuring-automatic-storage-management-on-standalone-server-with-oracle-enterprise-linux-and-oracle-11g-R2-using-external-storage-managed-by-openfiler.html

Set up and check Display resolution of the Red Hat Linux 5

Similar Messages

Maybe you are looking for