Set up and migration assistant can't see time machine back ups

Hi. Trying to cut this short.
I Tried installing osx 10.8. Halfway through the installation it told me I didn't have enough free space. Helpful.
i tried to restore from time machine, the back ups were viewable, but it said i couldn't as the disk was in use or couldn't be un mounted.
Ive now deleted the hard drive and reinstalled 10.7.5.
Set up couldn't restore from time machine back ups as it couldn't find them.
Ive started osx and tried to use migration assistant. It can't see the time machine back ups.
However, if I open the time machine app it can see the back ups.
I've rebooted in recovery and

Seems my text has vanished. This site is terrible on my iphone. Would expect better.
I've rebooted in recovery and tried to restore from time machine but again it won't find the back ups.

Similar Messages

  • Migration assistant can't see time machine disk

    New hard drive to replace broken one - Migration Assistant doesn't see the external hard drive with my time machine backup, even though it mounts to the desktop... Anyone else had this problem? Using a MacBook pro with OSX 10.8.4

    Here are the articles I have on Migration Assistant. None of them had the answer to your problem (or at least I couldn't find it). Check what you did versus the recommendations in the articles is about the best I can offer.
    Migration Assistant
    Migration Assistant (2)
    Migration Assistant – Tips and Tricks

  • Setting Up a New Mac From Two Different Time Machine Back-ups?

    Greetings Apple People,
    I am planning on getting a new iMac. Right now my wife I are still using our separate MacBooks from college. Both of them have Time Machine back-ups. We would like to setup our new iMac to have two different users. Is it possible to setup each of the users on the new iMac from our respective Time Machine back-ups?
    I know you can do this seamlessly with one Time Machine back-up, but can you do it from two different back-ups, essentially merging the two, while keeping the separate user profiles?
    Thanks!

    Follow the steps in Pondini's Setup New Mac guide using one computer as the source on first boot. Then, hook up the second computer and use the Migration Assistant to transfer the second user account and nothing else. Don't use the TM backup because it's much slower doing it that way than directly from each machine.
    27" i7 iMac (Mid 2011) refurb, OS X Yo (10.10), Mavs, ML & SL, G4 450 MP w/10.5 & 9.2.2

  • Migration assistant can't access Time capsule back up

    Hello,
    my old Macbook pro died yesterday and I bought a new one. I am trying to migrate all my files from a Time Capsule/Time Machine back up using the migration assistant. However it does not work: I get the message
    "The back up cannot be opened. Make sure that all of your network devices are connected and turned on. It appears that this backup is already in use.  Make sure the backup is not currently mounted by another machine and try again."
    I can connect of course to my Time Capsule, and see the sparsebundle file.
    What should I do?
    I am always on Leopard both on the old and the new Macs.
    Thanks!

    So far I have made an improvement: I have managed to unmount all users using the Airport utility, and now it seems the Migration assistant would be working...
    More news soon.
    Thanks

  • Mavericks Migration assistant does not see time machine backup of older Lion Mac

    Used to have a Macbook Pro. It was stolen (circa July 2014). Luckily I had up to date Time Machine Backups. The Macbook Pro was completely up to date running the latest OSX Lion (circa July 2014) when stolen.
    Bought a new Macbook Air just now (Mar 2015).
    Plugged in the old Mac's Time Machine Backup Disk, Migration Assistant doesn't see the old Mac's Backups.
    So I setup the new Macbook Air without restoring.
    Plugged in old backup drive, am able to navigate to old Mac's Time Machine Backups.
    Tried running Migration Assistant many time , but still it does not see the the  old Mac's Time Machine Backups. (although they continue to show in the drive if I navigate to it)
    Pls help so I can migrate the old Mac to the new Mac!!!!

    Thanks Turbostar.
    Well, I think there should be solution to use TIME CAPSULE restore as it should I mean I bought Time Capsule because it is easy to use and I really do not want to solve any issues or make any workarounds.
    I think APPLE should resolve this ASAP. Meantime maybe anybody knows any trick about this issue?

  • Migration Assistant Won't Recognize Time Machine Back Up

    My old white macbook just died. I bought a new macbook air to replace it. I am trying to use the time machine back up in migration assistant but it won't work. Since the Air doesn't have firewire I am connecting the external drive to my AirPort Extreme. It recognizes the drive but when I click to use it I get a connection error message. I tried hooking up the drive by USB but it won't mount at all. What am I doing wrong? I don't really want to do a full Time Machine restore because the Air has iLife '11 and the macbook only had iLife '10 and I don't want to have to pay for it again.

    First of all, Migration Assistant is smart enough to keep the newer version of iLife.
    Second, your MacBook Air came with a restore drive (a little flash drive) that has iLife on it. You don't have to purchase it again.

  • Migration Assistant doesn't see Time Machine volume

    I'm moving from a MacBook Pro running 10.6.8 to a MBP running 10.7.5. I thought this would be pretty simple  ... just attach my Snow Leopard Time Machine external drive to the Lion MBP and run Migration Assistant.
    But when I go through the MA steps, MA does not see my TM drive. I've made sure I have the latest upgrades and have run Disk Utility's First Aid on the TM drive.
    Ideas? I know I can try MA with other interfaces but using TM allows me to work on my old computer until my new one is ready.
    The TM drive is a 500GB Iomega eGo drive.
    Thanks.

    jtfey wrote:
    I've done Migration Assistant installs before and when MA asks if you're restoring from another computer or a TM drive, and I select TM, the name of the TM drive shows up.
    Not if it's directly-connected.  It shows the Computer name and the name of the HD that were backed-up, per the sample posted earlier.
    If it's on a network, the name of the volume it's on is shown, like the 4th item in the sample.
    Plus, the first time I tried doing a restore I saw the source as "Macintosh HD" and went ahead and ran MA. About 85 minutes later it was done and no data had been transferred from the 10.6 MBP to 10.7 MBP. Nothing.
    The data would be in the transferred accounts, not the one you ran the Migration from.
    This is the first 10.7 MA I've done. I would not have imagined that Apple would design software that asks you for your TM drive and then, when you make that selection, you never the name of the TM drive show up.
    I couldn't agree more.   I've submitted requests to change that several times, including during beta testing of both Lion and Mountain Lion.  Please add your voice here:  http://www.apple.com/feedback/macosx.html  Maybe if enough of us do so, they'll listen.

  • Migration assistant doesn't "see" Time Machine disk

    Just got a new logic board, and they wiped the hard drive.  My Time Machine disk mounts, and I can see the files.  However, migration assistant doesn't list it as a source.  (Yes it's formatted Mac OS Extended [Journaled]) 
    Time Machine recognizes it and wants to use it as a new backup disk, but it doesn't want to show me anything from the old back up. I didn't do a new backup of the "new" computer.  I don't back up applications just users.
    2.2 i7 MbP 8GB 10.7.4
    thanks
    DLS

    Just back home from a follow-up visit to the Genius Bar on this migration issue (from MacBook Air to new MacBook Pro).
    Previous efforts to migrate had taken endless hours and seemed to hang at the 20-mins-remaining mark.
    At the store, even after we manually turned off WiFi before connecting the Thunderbolt cable, Migration Assistant seemed to turn WiFi back on and start the migration over WiFi. 
    In the end, we used the Air (source) in Target Disk mode, which forced the computers to use the Thunderbolt cable.  Migration took a little over half an hour, as opposed to 12 hours or more that Migration Assistant was saying earlier when apparently trying to use WiFi.

  • Migration assistant - doesn't see Time Machine drive

    I'm using a netatalk based Time machine drive which works perfectly from my old 2006 MBP.
    I'm trying to use Migration Assistant to restore the data to my new 2010 MBP. Time machine on both macs sees the netatalk drive, however, Migration Assistant does not - there is just an empty window with a spinning progress wheel.
    Any ideas?

    This seemed to be a problem with mounting the Time Machine sparsebundle from the old MBP.
    I solved it by:
    1. Launching Disk Utility,
    2. Drag sparsebundle into the drive list on the left (takes ages, ignore spinning wheel)
    3. select the sparsebundle
    4. Click Repair
    took a few hours, but now I can mount the image and once mounted manually, Migration Assistant sees it.
    Although it makes sense, it's not obvious that you need to mount the disk image manually for Migration Assistant to see it when Time machine sees it as a destination without doing that step.

  • Migration Assistant Doesn't See Time Machine

    I've seen a few threads on this topic but no answer.
    I upgraded my Mac Pro from 10.5 to 10.6, but when I tell the Migration Assistant that I want to restore from Time Machine, it doesn't see it or any of the other 3 drives that are in this machine. I just want to restore the user accounts and groups because one of the other drives is a data drive with lots of folders that only certain users have access to.

    Yes, I could, but I gave up and just re-created all of the users and groups and reset folder permissions manually.

  • Can I use One Hard Drive for 2x Time Machine Back Ups and another partition for all my data?

    Hi Forum,
    I am planning to but a RAID disc set up, but if i get a 2 disc set up, on one disc, can i have:
    Time Machine back up for one Mac
    Time Machine back up for 2nd Mac
    Anothe partition for all my data.
    then have that RAID'd to second disc?

    no one?
    and if this set up was on one disc, and one partition for one TM was for the Mini that has this drive attached, would TM back up this whole drive 2x TM Partitions and 1x partitions with data on, ok? it wouldn't get confused by trying to back itself up

  • Snow Leopard OS will not "see" older Leopard Time Machine back-ups

    I upgraded to OSX Snow Leopard from Leopard using a new hard drive (I wanted a bigger drive so it was actually a fresh install rather than an upgrade). OSX SL could see Time Machine back-ups from the Leopard system initially (before performing an OSX SL back-up). Now that the OSX TL back-up is completed, the previous Leopard back-ups cannot be seen by Time Machine. Any ideas on how/if I can get it to see them (as I could before I did a full back-up)?
    I can see them on the drive, but just can't get to them via Time Machine.
    Thanks!

    Hi, and welcome to the forums.
    Yes, Time Machine normally only shows you the backups for the Mac you're on.
    You need the +*Browse . . .+* option. See #17 in Time Machine - Frequently Asked Questions (or use the link in *User Tips* at the top of this forum).

  • Migration Assistant can't see my USB ext HD for Time Machine!

    Here is a question for Pondini!
    I've read through many of the threads here, including Pondini's tutorials on how to set-up Time Machine, use Migration Assistant, etc. Alas, I'm not a technical person and have hit a wall.
    Here's the scenario:
    Last week my iMac running Mountain Lion crashed. The hard drive was initially "repaired" using Recovery, erasing all data then restoring the drive from Time Machine backups stored on a Hitachi 2TB Touro USB3 external HD. But soon after the system froze again and a 2nd restore did not work. I concluded that my almost 5 year old HD was gone.
    Where I stand now is that the iMac's HD has been replaced with a new one which came preinstalled with Snow Leopard. I absolutely want (need!) to restored my Mac from Time Machine to get back all my settings and info.
    During the iMac first boot Setup Assistant did NOT see the external hard drive even though they are connected properly. (Note: My older iMac is undoubtedly USB2 but the external HD is backwards-compatible USB3. THAT is the connection, from the external HD directly into the back of the Mac. It is mounted on my desktop and files can be accessed through Finder.) So I then proceeded to set-up my "new" computer with basic settings, which is how I came to see my external HD was properly mounted and connected. I also upgraded the OS on this new HD to Mountain Lion so it would be the same as my most recent Time Machine back-ups.
    Since then I have tried using Migration Assistant to migrate from Time Machine on my external drive but it still does not recognize any drives - Migration Assistant just searches endlessly for other computers. Argh! I've tried all the tips I've read in these forums and none have helped. I scanned my external drive for errors using disk utility but none were found.
    On my external drive there is a folder in the root called Backups.backupdb. Double-clicking it simply opens the folder in Finder, to reveal folders with names familiar to me - the previous HDs computer name, then a bunch of dated folders within that, including a lone file called 2012-08-17-062839.inProgress. I suppose my HD may have died while backing up to Time Machine.
    WHAT do I do?
    Let's say the worst case scenario is that I cannot use these Time Machine backups. Is there any way to root through them for data I can hand-copy to my iMac's new internal drive? It would be grueling but at least it's something. How can I retrieve years of email? Luckily photos, music, videos, etc were backed up manually into a separate folder (also in the root of my external drive).
    THANK YOU!!
    Danielle

    This happened to me after hard drive replacement under the Seagate Drive Recall at the local Apple Store. Here's what I learned from the process:
    I Wagged the Mac home, fired it up (with naked OS installed at the Apple Store), and it wouldn't see my Time Machine drive with Setup Assistant - not on firewire 800 nor USB. Just a grey spinner that lasts forever. When I try just continuing anyway, it offers me something that looks plausible, but then puts up a dialog about duplicate user name, and no matter what I enter, it always says "that user already exists". So I think - maybe Migration Assistant. Complete the setup, create an account, watch the nice welcome movie. BAM - there's my Time Machine drive on the desktop. OK - it has to work . . . but no. Same behavior in Migration Assistant, plus the new OS offers to start making backups on my Time Machine disk - it's not recognizing it at all.
    So - back to the Apple Store - let the genius figure it out. It turns out there are multiple problems. First, the "genius" who imaged my new machine picked 10.7.2 but my machine had 10.7.5 - turns out, it's not enough just to have right cat. Even a point release older OS may not recognize a newer Time Machine drive. The guy at the desk said "We have images of everything but the 10.7.2 has free iLife in it, so they like to use that one". What the heck? They don't image what you had originally as a matter of sane process?
    Having figured that out, we re-image 10.7.5 at the store thinking we've fixed it. But no - Setup Assistant still won't see the Time Machine drive. Not on USB, not on Firewire. Not in a box, not with a fox.
    So here's the second trick - newer machines have a recovery partion. see: http://www.apple.com/osx/recovery/  Boot with the option key held down, pick that partition, then you'll get a "system restore" option, to restore your whole system from a Time Machine backup. My drive was recognized by the recovery partition restore process when neither Setup nor Migration Assistant would. Obviously, there's something broken in Setup/Migration Assistant.
    Takeaway:
    - if you're getting a drive replaced by Apple, make sure they image *exactly* the same OS you had
    - if Setup Assistant fails, use the recovery partition for system restore
    - Use Recovery Disk Assistant http://support.apple.com/kb/DL1433 to make yourself a recovery thumb drive just in case. With Apple's new "no media" approach to the OS, you're hosed without it.

  • Migration Assistant can't see my external hard drive.

    Migration Assistant can't see my external hard drive with my back-up info on it. I need to migrate my user data from an older back-up ( OS X 10.4.11) to a recently installed OS X 10.5.8 system on a Mac Pro.  The external drive is not bootable.  Any ideas?

    Great news, thanks!
    On iTunes see this...
    http://support.apple.com/kb/HT4527
    Expand the External drive section & it's 6 steps.
    More info, especially the Wrong Way part...
    http://www.ilounge.com/index.php/articles/comments/moving-your-itunes-library-to -a-new-hard-drive/

  • Mac Pro early 2008 2 x 2.8GHz Quad Core 10.7.5, replaced 4 x 500ghds with 4 x 3Tb and Raid card Raid5 them OK but can not load time machine back up as it does not see any of the 4 drives, neither does disc utilities, any thoughts?

    On my Mac Pro, early 2008 2 x 2.8GHz Quad Core 10.7.5, replaced 4 x 500ghds with 4 x 3Tb. The Raid card Raid 5ed them OK but can not load time machine back up as it does not see any of the 4 drives, neither does disc utilities, any thoughts?

    You don't see drives when using a hardware RAID only the volumes.
    WD Green are not suitable for hardware RAID (or software RAID for that matter).
    USB2 and TimeMachine are a disaster waiting to happen. I've used SATA (internal) and eSATA (using SATA PCIe cards) trouble-free.
    I can't say I begin to understand your use or "choosing the install drive for the backup"
    Install what?
    You don't load TimeMachine. Maybe seems minor but that is not how to describe the behavior of software.
    You read FAQ and How To http://www.apple.com/support/timemachine
    Time Machine’s Gory Details:
    https://www.apple.com/support/timemachine/
    TimeMachine 101
    https://support.apple.com/kb/HT1427
    Lion Recovry & TimeMachine
    http://www.apple.com/support/lion/installrecovery/
    http://www.apple.com/support/lion/
    How To Restore Your System
    http://pondini.org/TM/14.htmlMac OS X v10.7 Lion
    Pondini's Blog: Time Machine - Troubleshooting -- B5.  Would you like to inherit (or re-use) the backup . . . ?

Maybe you are looking for