Set up book in hard cover instead of soft cover.

I just finished creating two photo books, one with 100 pages and the other with 90. I proceeded to order when I was asked to choose the color of the cover. It was then I noticed that I was ordering a hard cover book which I don't want. At this point, there was no way to indicate I wanted soft cover. Is there any way I can duplicate my efforts into a soft cover edition? Or, is it as I fear, that I had to choose soft cover BEFORE I began preparing the book?

Judy:
Welcome to the Apple Discussions. I think you can. Select the soft cover book in the Source pane and type Command-D. That will give you a duplicate copy to try switching from soft to hard cover, same theme. Even though it warns you that text may be lost I've switched themes before without losing text. Worth a try.
Do you Twango?

Similar Messages

  • Anyone has print out the iPhoto album book by apple after finish editing? May I check is the quality good? I have compiled my photo album book , choosen hard cover option , 100 pages , estimated cost is US150. Not sure worth to print out or not?

    Anyone has print out the iPhoto album book by apple after finish editing? May I check is the quality good? I have compiled my photo album book , choosen hard cover option , 100 pages , estimated cost is US150. Not sure worth to print out or not?

    All I can say is the books I've created as gifts to my children for their children were received with absolute joy and appreciation (each book chronicled in pictures  the first year of each grandchild's life). Granted the sentimental factor had a lot to do with the recipient's enjoyment of the book but they were spetacular. The book with its glossy dust cover is a very impressinve way to present your photos. 
    As Larry has pointed out so many have posted here that they were very satisfried with their book and Apple is very good about correcting problems. 
    To make sure there are no errors in the book before you order preview the book as described in this Apple document: iPhoto '11: Preview a book, card, or calendar before you order or print it. If the PDF file shows no errors, either in text typos (my biggest problem) or in missing photos, etc., the printed book will be error free.
    OT

  • Can I do a 10 x 10 custom book with hard cover?

    Looking for a custom size solution. I would like to do a square book, 10 x 10, but the "buy book" button is grayed out. Becasue it can't be ordered, presumably. Is that correct, or am I doing something wrong?

    You would probably have to create a pdf and take it to a printer for that custom layout.

  • PS CS4: Straight, hard lines instead of soft curves, history problems?

    Hi,
    sometimes Photoshop (Intuos 4, AMD Phenom2 X6 [email protected]) draws a hard line at full pressure instead of a soft, dynamic curve. It simply connects the starting and ending point. Painting ia 20000x14000@16GB Ram with PS using 12GB, painting size 6GB.
    I also experienced when going back history states with ctrl-alt-z the tool automatically switches to zoom, and sometimes history just jumps back to the latest state.
    Could this be a history lag? Any chance to fix this?
    Thanks!

    Before upgrading my machine and OS from Win7 to Win8 I had a similar problem, which was that the same thing happened, but there was part of that straight line missing. So there was a dot, break, and then the straight line. In between lies a new OS plus new hardware.
    So you suspect it's a Wacom bug?

  • HT204364 I would like to re-order a photo book; already received a soft cover and would now like to order in hard cover; can't get to new order form; keeps giving me the old order of the soft cover; please help

    I would like to re-order a photo book;  previously ordered & received a soft cover book; would not like to order same book in hard cover; cannot get to a new
    order form to make selection.......when I "Buy Book", I keep getting my old order form and no way of getting to a new order form;  please help!

    select the book in the source pane on the left - press command-D to duplicate it - with the copy to change theme and pick the same (or new if you want) theme and the hard cover format in the size you want
    LN

  • Text on Dust Jacket different than on Hard Cover - Help

    Although I read an April 30th posting on this same subject, I did not really understand the replies.
    The dust jacket on my hardcover book is perfect in Lucinda Calligraphy Text as is all the text throughout the book. However when I checked the preview of my book, the Hard Cover Text was in a block type text.
    How do I change the block text on the Hard Cover to Lucinda Calligraphy to match the rest of the book?
    I have spent the past 2 days trying to figure this out and total frustration has finally set in.
    Since I wish to order 6 copies of this book for family members, as a tribute to my recently deceased mother, I want it to be as perfect as possible.
    Any help would be greatly appreciated.
    PJC

    PJC:
    What theme did you use and was the text you used for the dust jacket the default font for that theme. I just checked my last book and the embossed text was the same font as the dust jacket but I had used the default font. As Larry mentioned if a non default font is used for the dust jacket maybe a default block font is used for the embossing.
    Post that question to Apple at http://www.apple.com/support/photoservices/contact_us/.
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.≤br>
    Note: There now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

  • Template to create a 3D box set of books

    I'm looking for a template to create a 3D boxed set of books with the cover on the right side and three spines to the left. There was a really nice tutorial on how to do it on YouTube and the woman had the templates available for 99 cents on Amazon Kindle but of course, her website doesn't work and there's no templates. ( [removed link] ) I just need a simple template to drop the spines and front cover in. Can anyone help me?

    I recently came across a free action for this called 3-D Box Generator by Art Bees
    3D Box generator for Photoshop | PSD Box
    Simple and works great!
    Nancy O.

  • My 7x7 book will only upload as a hard cover and not a soft cover.

    I spent this afternoon putting together a simple 68-page 7x7 book in the book module today.  My intention was to upload it as a soft cover book.  I tried to do that several times this evening, but after LR had rendered the pages and uploaded them I would get a error related to "BookCover" size.
    A little research suggested bugs in the system did not like two-page photo spreads, but I was not using any two-page spreads.  Still, I chose a couple of different cover layouts and tried to upload each one.  Unfortunately, I got the same error.
    So I put everything back the way I had intended it to be to begin with and decided to see if it would upload as a hard cover.  Lo and behold, it did!
    But I don't want this book as a hardcover.  It's a book of Instagram shots and I was specifically going for a more informal look.
    Is there something obvious I am missing here?  I've also been working on a larger book (with two-page photo spreads) and I'm a bit worried that I'm going to get an error when it comes to uploading that as well.
    Thanks,
    Shannon

    So a fault in the Hardware Raid controller could make it not read properly? I am planning on having a good backup set up after this!
    As for the screenshot, the original was not set up with the SoftRaid. When I got the computer back I installed that to see if that may pick it up and make it at least readable to save the data on it. The two in question are the highlighted 4TB drives, which befor also read as one drive as it was set up in the OWC enclosure as a hardware raid.

  • Does anyone know how to simply edit the text in the spine of hard cover, 40 page book in the book mo

    Does anyone know how to simply edit the text in the spine of hard cover, 40 page book in the book module? I can click into any other text window and edit and change attributes but I am locked out of editing text when it comes to the spine of the book. I spoke to Blurb support and they referred me to Adobe. I spent 45 minutes with support here - no one knew. I am still waiting for a call back with an answer... not holding my breath as it's been a few hours now. HELP!!!

    Thanks for your reply John. I have experienced all the fiddly aspects you mentioned - these are attributes and although changing them requires the skill of a surgeon's hand - it's the actual editing of the text I can't seem to access anymore. The box just won't allow me to do anything except change attributes. Does that make sense? And it's only on the spine where I am having this issue. Puzzled! I have even rebooted the program and just now the computer - to no avail. 

  • How to make hard cover paper book from iBooks author digital book

    Someone suggested I make a few hard cover books from my iBooks Author published digital book. How would you go about doing this?
    What file should I should I use, (PDF, etc)? What printer would do this best (iPhoto publishing, etc)?
    Hoping it will be easy to use the format of iBooks Author so that I won't have to make changes.
    Many thanks for your help.

    You can print directly from iBA or you can generate a PDF from the print menu and use that. Be sure to test layouts, orientation, etc. Of course certain content won't be output to a printer.
    There are hundreds of printers to choose from - shop your budget.

  • When I was ready to place the order for my iPhoto book, I realized that it was for a soft cover book and I wanted hard cover.  How can I change this without losing my prepared book?

    When I was ready to place the order for my iPhoto book, I realized that it was for a soft cover book and I wanted hard cover.  How can I change this without losing my prepared book?

    Duplicate your book and try to change the theme in the copy.  Chnaging the theme may change the layout  of your text fileds. That is why you need the copy to be able to compare the pages before and after.
    Ctrl-click the book in the Source list and select "Duplicate".
    Click the "Change Theme" button in the upper right corner of the Book pane, make sure, you have the same theme selected and the same size. Click Hardcover.

  • Somehow I messed up creating my hard cover book.  I don't have the back cover and flap.  How do I get it back?

    somehow I messed up creating my hard cover book.  I don't have the back cover and flap.  How do I get it back?

    What version of iPhoto are you running?  Where are you seeing this lack of back cover and flap.
    A first try fix is this:  make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
    1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
         User/Home()/Library/ Preferences folder.
    2 - delete iPhoto's cache file, Cache.db, that is located in your
         User/Home()/Library/Caches/com.apple.iPhoto folder. 
    Click to view full size
    3 - launch iPhoto and try again.
    NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto.  You'll also have to reset the iPhoto's various preferences.
    If that doesn't help create a new book and see if the back cover and flap are in it.  If so then it appears that your original book is damaged. 
    You can try rebuilding the library by launching iPhoto with the Option and Command keys held down and select the option to Repair the Database, option #3.  If that fails rebuild again with option #4, Rebuild Database.
    If that doesn't help then create a new book, verify that the back cover and flap is there and add the photos.
    OT

  • I have produced (7) hard cover iPhoto books in the last three years and would like to create a using a custom photo arrangement if possible.

    I have produced (7) hard cover iPhoto books in the last three years using several of the provided templates.  I would like to create a photo book using a custom photo arrangement if possible.  Is it possible to create a custom photo book?

    No - you can create custom pages in other software and use them
    Using iPhoto you are limited to the themes adn layouts offered
    LN

  • Can I change from hard cover to soft cover after the book is designed?

    Can I change from hard cover to soft cover after the iphoto book is desgned?

    Yes,  Just go to the View all pages window and click on the Change Theme button.  There you will be able to switch size and type of cover.  HOWEVER, just to be on the safe side make a copy of the book beforehand by clicking on it and typing Command+D (duplicate).  Sometimes some of the text might be lost.  It's a possiblity but I've never had it happen. 
    OT

  • Hard cover Books

    I made a 78 photo soft cover "book". Its great!
    Now, I want to create a hard cover of the same photos, but, hopefully without loading up each photo again. please advise to a simple new Mac user! Thx.

    Welcome to the Apple Discussions. Select the book and type Command+D to duplicate the book. Open either copy and click on the Theme button. There you will be able to change the cover type. You'll get a message that you might lose text but I've had very good luck in changing themes or styles and not losing any. The other copy can be used to cut and past any text that might be lost.
    Also be sure to do a Print to PDF of the book and proof it for all of the text, typos (my biggest problem), etc. before ordering.
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
    Note: There's now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

Maybe you are looking for

  • How to give call to dll in indesign plugin

    Hello All , I am developing one indesign plugin on Mac OS X 10.4. I want to give a call to one dll in pluging code. But the problem with mac os x according to my knowladge ,dll need to be build in same project where we are calling that dll. That is w

  • SQL PLUS/ ORACLE

    HELLO, I DOWNLOADED 9i DATABASE 9.2.0.1.0 TO ACCESS THE SQL PLUS APPLICATION TO PRACTICE SQL. UPON THE LOGIN SCREEN WHEN IT ASK TO PUT IN USER I.D.,PASSWORD, AND HOST STRING. I RECEIVE AN ERROR MESSAGE THAT SAYS "ORA-12560: TNS: PROTOCOL ADAPTER ERRO

  • Cannot go back to 64-bit mode

    Not sure what I am doing wrong but when I back to the info panel to take CS5 back to 64-bit mode because some plug ins had been updated but the check box was no longer visible.  So I am in 32 bit mode and do not know how to get out.  Any ideas what I

  • Read Out Loud support?

    In absence of an Android device in this house-hold, a quick question here: Does Adobe Reader for Android support 'Read Out Loud' natively? (I don't see it mentioned in online-docs?) or does it only work in conjunction with Android's build-in accessib

  • Indesign CS2 - TOC help.

    So I have a TOC setup, being created from a paragraph style that I have created.  The catch is, At times, I don't necessarally want the entire paragraph to be included in the tables of contents... For example. Member in the Spotlight: Professor Xavie