Set up conversions tracking with Iad Workbench

Hello,
I am starting to set up Iad Workbench and trying to sort out the conversion tracking.
I would like to integrate the tracking into Mixpanel, eventually MAT (mobile app tracking), Adjust and Google Analytics if not possible with Mixpanel.
From other posts, it seems that just MAT is enabled for the tracking. Is this correct?
Also, from a technical perspective, what is it needed to set the tracking in place? Any type of code I should pass to my tech team?
Best,
Carola

No, not without help from the thief.

Similar Messages

How do I set up a track with lots of markers? Stories? End jumps?

Hello,
sorry if the topic is a bit vague, I'll try to explain as good as I can. And I've just had a cup of tea, so let's go.....
I'm working on a project in FCP. On my timeline, there are about 20 clips, with 2 seconds of black cut in between.
What I want to do in DVDSP is have a menu and several submenues. No problem here.
On the main menue, there is a play-all button, and that should start the track as a whole, and play from the very first to the very last clip, including the 2 second black bits, obviously.
The submenues have buttons that target the individual clips on the tracks. I want the clips to play, and then jump back to the submenue that button is on.
How do I go about it?
I add chapter markers to the clips, right? And I can link the buttons on the submenues to those chapter markers. But how would I make the whole track play, i.e. how would I integrate the play-all button?
Or would it be better to turn those clips into stories (haven't done that before, is it difficult?), and then the play-all button could target the track?
I hope I've been clear, please let me know if I wasn't. Any advice or help is greeeeeaaaaatly appreciated. Did I mention the deadline? No? Oh well.....
Thanks a lot in advance,
Colin
OS10.4.7
DVDSP 4.1

On approach is set forth here (you can download movie and scroll through)
http://www.dvdstepbystep.com/passelections.php
The are a few othe things also to look at. Easy to do stories
http://www.dvdstepbystep.com/stories.php
Put them all on one track, set chapter markers for each one.
So lets say three clips
Play All would target story that has 1,2,3 markers
To select play range between 1 and 2, make a story with just Chapter 1

Labor Tracking with no clock in required

Hello together,
I have Problems to understand Labor tracking Feature. I working with How-to-Guide for Labor and I want to set up Example 3 of rollup rules (Page 36). One of the prerequisites is "to set up Labor Tracking with no clock in required". But I do not know how to do that because the guide never presented that Option before. Also the figure of the example Shows clock in and out timestamp.
Pleas help.
Thanks and regards,
Anke

Hello Anke,
There is section 4.5.1 'Defining Attendance Rules', which answers your question. You can use
Manual Clock-In (default): To let users log on with no clock in and perform manual clock-in/out
in POD, if required.
Br, Alex.

Can't get more than one Ultrabeat sound setting in one project. If I have a drum track with an Ultrabeat "downtempo kit" and I make another drum track with "hip hop kit" in the same project, the settings of the other track transform to "hip hop" setting.

So here's my situation. I'm using Logic Pro 9. I'm trying to use multiple drum tracks each with different Ultrabeat settings. So let's say I have drum track with a loop from Ultrabeat that has the "downtempo kit 2" setting on it. If I make another drum track and create a different loop in Ultrabeat with a different setting, let's say "hip hop kit" for example, and put that loop onto the new track, then the previous loop that I had in the first drum track will still be the same loop but the sound kit settings change to that of "hip hop kit." So I can have different loops, but they all have to be "hip hop kit" settings or "downtempo kit 2" settings. I am unable to multiple kit settings. Is there a box I need to check to turn some automation off or something, because this is pretty inconvinient? Why do I have to have only one Ultrabeat sound/kit setting per Logic project?

Sounds like maybe you're using the same channel strip on multiple tracks? Make sure you're creating a new software instrument channel strip for each independent instance of Ultrabeat you want to have. If you use the same CS, then all tracks that use it will have to have the same kit.

CSSCAN for database character set conversion failing with ORA-01578

Hi ,
CSSCAN for database character set conversion failing with ORA-01578: ORACLE data block corrupted (file # 84, block # 23930). please help me out in this regard.
Thanks,
Sravan.

Hi Anand,
Thanks for your update. The segment is a table not an index in my case. And i got this error while running CSSCAN on Apps database for character set conversion to UTF8 from WE8ISO8859P1. Please find the snapshot below for your reference.
SQL> select segment_name, segment_type, owner from dba_extents where file_id = 84 and 23930 between block_id and block_id + blocks - 1;
SEGMENT_NAME
SEGMENT_TYPE OWNER
EDW_LOOKUP_M
TABLE POA
SQL> ANALYZE TABLE POA.EDW_LOOKUP_M VALIDATE STRUCTURE CASCADE;
ANALYZE TABLE POA.EDW_LOOKUP_M VALIDATE STRUCTURE CASCADE
ERROR at line 1:
ORA-01578: ORACLE data block corrupted (file # 84, block # 23930)
ORA-01110: data file 84: '/d911/oracle/dbcondata/poad01.dbf'
Thanks,
Sravan.

You cannot set up an iAd Workbench account using this Apple ID.

I tried to sign in iAd Workbench and set up account, but when I logged in, it said, "You cannot set up an iAd Workbench account using this Apple ID. Try again using a different Apple ID that is not connected to an iCloud, MobileMe or .Mac account." What does this mean? How can I fix this?

Did you figure this issue out iderrick? I'm having the same problem.

I recovered my stolen iPhone 4s thru' IMEI tracking and Police's help. The thief had set up the phone with his apple account. He is now out of police's contact and i could not retrieve his Apple/icloud PASSWORD which i need to ACTIVATE my iPhone. Any way?

i recovered my stolen iPhone 4s thru' IMEI tracking and Police's help. The thief had set up the phone with his apple account. He is now out of police's contact and i could not retrieve his Apple/icloud PASSWORD which i need to ACTIVATE my iPhone. Any way?

No, not without help from the thief.

IAd workbench, can't login

I am trying to login to iAd Workbench using the instructions here to set up my first campaign.
When I try to login, I just get returned to the login screen, with no errors or messages, so I can't log in to iAd workbench.
Is there something else I need to set up first?

I found out from Apple that you cannot log in using an email address from Apple, ie you cannot loging with any email address using:
@mac.com
@me.com
@icloud.com
@apple.com
I don't know why this is the case, but that's what it is.

How do I set up a track that my fade tool will work on?????

I'm trying to do fades on my tacks using the fade tool.
I open a new track, record something and go to tools and pick the fade tool.
But it's not letting me do a fade at the start or the end of a track.
I go to the inspector window and look at the Region Parameter Box.
There I notice that there was not much info in the Region Parameter Box in the inspector window, just (loop, delay, follow tempo)
On other tracks from the templets in logic 9 I could do a fade in and with the fade tool, but I notice the Region Parameter Box in the inspector window had a bunch more info like,
(loop, delay, gain, fade in, curve, fade out, follow tempo)
So how do I set up the track that has all that info in the inspector windows Region Parameter Box,
then I could do my fades with my fade tool.
Thanks for the help..........LEROX

Flatten your Take Folder.
Christian

How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.

How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.
When Charter Tech goes to your site, have them connect the modem up, but do not connect the modem to your iMAC or MacBook Pro. What you want to do is connect the Airport Extreme to the iMac or MacBook Pro first with the Ethernet Cable. You have to do this to configure via Airport Utility to set up the Base Station Name & Base Station Password.
You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple Tv, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
Wireless Security will be -> WPA/WPA2 personal or just WPA2
Enter the Wireless Password you want
Verify the Wireless Password (enter it again)
After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow. Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green. If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green. Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.
WHAT TO DO IF YOUR AIRPORT EXTREME WAS PREVIOUSLY SET UP FOR USE WITH ANOTHER CARRIERS ROUTER OR MODEM.
NOTE: If you already had your Airport Extreme connected for example, I previously had ATT Uverse and the Airport Extreme was connected to the Wireless Router Model 3801HGV, I disabled the Uverse Wireless and used the Airport Extreme for the Wireless signal in bridge mode, as the Airport extreme Signal is much stronger than the Uverse router, and I was able to obtain a Wireless signal with the Airport Extreme way much better with no signal loss which was very very frustrating with the Uverse router.
Anyhow if you had it hooked up like this, now that you will be using it with the Charter ARRIS Modem TM902A, you will need to reset the Airport Extreme to clear out the old data it has in memory, with the previous set up otherwise it will not work. Trust me I spent 6 hours trying to make it work reading all Apple Support Community questions and answers relating to this type issue/problem others have been having trying to get their set up working. I tried all the tips, and I finally decided just to see if by chance I would be able to connect with someone with Charter Tech support who might be familiar with Apple to be able to assist me and by luck I did. He told me why it was not working and was all due the previous configuration with the ATT Uverse router was still in memory with the Airport Extreme. Finally it was 10:30 PM when I decided to call Charter Tech Support and I had been working on this since 3:00 pm pacific. I did not call them earlier as all the post I read said they never received any good help from Charter. After calling them I finished up by 11:00 PM and was able to finally connect Apple Tv, iMac, iPhones and Macbook Pro. We love our Apple Product and Happy all is connected with the new
Internet Provider Charter. I must say the speed is way way much better than it ever was with AT&T Uverse.
THIS IS WHAT YOU WILL NEED TO DO:
First you will need to unplug the Airport Extreme, then by taking the tip of a pen or paper clip end you need to push the reset button on the back of the Airport Extreme and hold it
down and at the same time plug the power cord back into the Airport Extreme count to 5 or 10 then release the reset button. Then once he light in front of the Airport Extreme stops blinking you need to plug the Ethernet cable from the Airport Extreme to your iMAC or Macbook Pro, and restart which ever one you have, then open the Airport Utility once it is back up. If you see airport extreme pop up with the old network name or it shows and yellow triangle click on the Airport Extreme ICON it will not let you configure it but will ask if you want to get rid of it or remove and just do it. Then Again restart your iMAC or MacBook Pro, open up Airport Utility again, and on the top left you should see under “Other Airport Base Stations” the MAC ID for the Airport Extreme.
You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple TV, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
Wireless Security will be -> WPA/WPA2 personal or just WPA2
Enter the Wireless Password you want
Verify the Wireless Password (enter it again)
After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow. Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green. If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green. Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.

I just got a Charter Modem. Model TM822. While I was moving, my Airport Extreme was still at my old place.
I have a Linksys WRT320N I used for the initial Charter setup.
I can get my Airport to work here, but the Internet light on the Modem flashes Yellow.
Hasn't caused any issues so far but one thing I did notice.
On the Linksys there were 3 DNS servers listed.
The Airport Extreme only lists 2 and i don't see where I could add another, only change whats already there.
I tried everything above, but light on modem still flashes yellow.
I have the technicians cell phone. Told me "that shouldn't be" and gave the same advice listed above.
I'll break down and call Charter one day, see if it's on their end. NSA tracking may need a reset LMAO.

How do you setup a send to a track with multiple effects?

I am just learning how to mix and master songs as well as using Adobe Audition and was wonder if it was possible to allow a track to have multiple sends on them, Lets say one send containing Reverb on one bus, then another send applied to the same track containg delay thus allwoing me to controll idependently how hard the two seperate affects will contribute to the mix.

Audition allows you to have up to 16 sends on each track with a separate level control on each. And you can set up a bus track for each containing it's own effects rack. If you really want to you can use any one of the sixteen sends from a bus to another bus or to the master track.

Set up apple Id with invalid email so can't validate new account. How can I edit account info when I can't sign in for anything? Thx

Set up apple Id with invalid email so can't validate new account. How can I edit account info when I can't sign in for anything? Thx

Hi Franklin777,
If you are having issues with your Apple ID, this article will get you started.
Frequently asked questions about Apple ID
The first step is to find and edit the Apple ID you created:
Apple ID: Finding your Apple ID
If you need to reset your security questions this article will help ...
The rescue email address is a different address than the one you use for your Apple ID.
Rescue email address and how to reset Apple ID security questions
You can edit or delete your rescue email address at My Apple ID. To edit your rescue email address:
Navigate to My Apple ID using your web browser.
Click "Manage your account"
When prompted, sign in using your Apple ID and password.
Click Password & Security
You'll be asked to answer 2 of your 3 security questions before you can make any modifications. If you are unable to remember your answers, you can choose to send an email to your rescue email to reset your security questions.
Hope you get back on track soon!
- Judy

How do I create a track with just controller MIDI data in it?

How can I create a track with just MIDI controller data in it?
For example: I'd like to create a track that issues a bank change/patch change and sets the default volume for that track, and that's it.
I can then use this setup as a template for future projects.
How can I do this?
It seems like LPX will not allow me to enter any controller data into a track without first defining a region. However, it seems that LPX also won't allow me to create a region with just controller data in it.
Ideas?
Thanks
-Mike

Soniq2 wrote:
How can I create a track with just MIDI controller data in it?
For example: I'd like to create a track that issues a bank change/patch change and sets the default volume for that track, and that's it.
I can then use this setup as a template for future projects.
How can I do this?
Let me qualify, I'm using Logic 9, not upgrading for various reasons.
Is this for an external Instrument? If so it's very easy to do using the inspector, but first you have to create an instrument in the environment. (at least in L9 and the way I do it, which is old school) Here's an example of an external instrument setup in the Environment.
A multi Instrument is created, channels 1, 2, 3, & 9 are active. Patch names are entered, format for bank change is selected. (just happens I selected channel 14 to open the patch names). This Instrument will now appear in the arrange page, and you can set patch change, bank change, volume & pan.

When I set all the tracks in the latest Garageband to the same volume levels and save, when I open the file again they've changed back to a previous setting?

I'm trying to mix a recording in the latest 2014 version of Garageband, but when I set all the tracks in the latest Garageband to the same volume levels and save, when I open the file again they've changed back to a previous setting? Does anyone know why it changes even after saving the file?
Below is my iMac settings.

Do you have a back up?
If not you're into using file recovery software like File Salvage - you can download a free trial and it will scan the disk for you and tell you with might be recoverable. Actual recovery will require that you purchase the app. There may be many files with the same or similar names. Always recover the largest file size.
There are other such apps. Search on Macupdate or the App Store

How to set the conversation id programmatically in a BPM process

Hi all,
I am using BPM/SOA 11g PS3.
Is it possible to set the conversation id programmatically in a BPM process starting with a none start event?
I know I can set it easily if I use a BPM process starting with a message start event.
All I have to do is set it in the "wsa:MessageID" node in SOAP Header when I initiate the process instance.
However, I have no idea how to set the conversation id programmatically in a BPM process starting with a none start event.
I looked for if there is any appropriate method in the Java api for the process instance management, such as IInstanceManagementService and CompositeInstance, but no method seems to be appropriate.
Does anyone know how to do this?
Regards,
Kenji
Edited by: Kenji Imamura on 2011/04/20 0:10

Hi fifty,
Did you get a solution to the above problem you have mentioned? I have a similar issue i am trying to fix.
I have a webservice call in a process activity and if the call does not work i get a soap fault and the fuego.lang.ComponentExecutionException . My process requires that i catch the exception infact any kind of exceptions that occur on that call and perform another activity in the process.
I have defined an exception handler at the activity level for java.lang.Exception and java.lang.RunTimeException.
i don't see anything in the catalog which would handle the SOAP fault OR the componentexception.

Set up conversions tracking with Iad Workbench

Similar Messages

Maybe you are looking for