Set Up CTS+: Webdynpro CTS_BROWSER - configure Organizer client in TMS

Hi all,
I'm trying to set up the CTS+ in a Portal Enviroment.
This is my landscape:
SID System Role
C1X ABAP + Java Stacks (CTS+ System and Trasport Domain Controller) with SPS15 (ABAP and JAVA)
JD1 Java Stack (EP Java Development System) Stack SPS14
JD2 Java Stack (EP Java Production System) Stack SPS14
I'm following step by step all points of Set Up and Use CTS+ in a Portal Enviroment Guide (May 2008).
In STMS (C1X) I add JD1 and JD2 System as Non-ABAP-System.
JD1 is the Java Source system and when I create it I set the flag "Activate Trasport Organizer" for C1X system
JD2 is the Java Target system and when I create it I set the flag "Activate Deployment Service" for method SDM
Then I create the new trasport layer ZJAD and the new trasport route from JD1 to JD2.
When I configure the trasport organizer Web UI and try to test the Web service CTS_BROWSER from SICF I received this message:
System C1X is not valid; configure Organizer client in TMS
Any IDEA??
Could you please help me?
Thanks
Moreno

Hi, I have the same issue here.
I think that is "normal" because SICF tries to run this in the name of you C1X system. This however must be running in e.g. the name of the development system.
e.g
http://hostname:8047/sap/bc/webdynpro/sap/cts_browser?SYSID=<PORTALDEVELPOMENT_SID>&PURPOSE=EP&sap-client=000&sap-language=EN
Thanks!
Edited by: BearCheese on Jul 9, 2008 10:05 AM

Similar Messages

Configure CTS+ - WebDynpro Exception

Hi Gurus,
I want to configure CTS+ and followed the How-to-Guide to set up CTS+ in a Portal Environment. At step 3.2.2 - Activating the Service - I wanted to test the service sodis_core_wbo as described in the Guide but I get a shortdump.
WebDynpro Exception: The Applikation SODIS_CORE_WBO does not exist.
The service could be activated without any problems but the test doesn't work.
Any ideas?
Thank you for your help.
Best Regards
Ines
PS: The Solution Manager is version 7.0. SPS 16

Hi,
As you have mentioned SP level is 17.
Please refer the following note.
Above SPS12 there is no Webdynpro component SODIS_CORE_WBO it is CTS_BROWSER
Please use CTS_BROWSER.
Refer the following note: 1145268
Thanks & Regards,
Balaji.S

How do you set up your Configuration Manager client when Imaging?

OK everyone we got an issue that we need to take care of sorry if this seems like a dumb question but we cant seem to make this work. How do you set your configuration manager client when you deploy your image(s)? I created package and pointed
it right to the config manager install directory just like the recommended one for USMT but it does not seem to work. I also tried to leave it blank but it appears to be mandatory.. So my question how do YOU get it to work for your areas?
Thanks

that might be the problem I dont see a "Microsoft Configuration Manager Client 5.0 All" anywhere. We threw something together that points to:
\\Server.Domain.com\SCCM_Install\SMSSETUP\CLIENT
What is happening is this.
Have a task to deploy Windows natively to the workstation
Drop applications to the workstation
do updates
capture back to server
All it does is
Drop the OS down
copy the Agent files
join to the domain
reboot
sit
sit
and sit

Problem facing with BC-Set activation while doing servicedesk configuration

Hi All,
I have installed Solution Manager 4.0,And i applied all the latest service pack (both abap and java service packs).I try to activate some BC-sets(ex: Service_desk_change_request_32A,Service_desk_change_request_32F2).When try to activiation it is giving Runtime errors like DATA_LENGTH_0
and Exception CX_SY_RANGE_OUT_OF_BOUNDS
Can some one help how to activiate the BC-Sets in the process of configuring the Service desk userin the SolutionManager system.
regards
srujan

Hi JP,
The BC sets in note 898614 are in IMG activity "Activate Service Desk BC Set". I put this together for myself just to track what the heck is going on while I configured this.
Cofiguration of Basic Settings:
SAP Solution Manager Implementation Guide
..SAP Solution Manager
....Configuration
......Basic Settings
........Standard Configuration of Basic Settings
..........Solution Manager
............Activate Maintenance Optimizer BC Set
................SOLMAN40_MOPZ_TTYP_SLMO_000
................SOLMAN40_CHARM_PROXYFACT_001
............Activate Service Desk BC Set
..............This task refers to the BC sets in note 898614:
................SOLMAN40_SDESK_BASICFUNC_000
................ZSOLMAN40_SDESK_ACT_ADVCLOSE_001
................ZSOLMAN40_SDESK_ACTIONLOG_001
................ZSOLMAN40_SDESK_TPI_ACT_AST_001
..............Then note 898614 says apply BC sets in note 931196:
................ZSOLMAN40_SDESK_TEXTTYPES_001 << This errors out
................SOLMAN_CORPF_TEXTTYPES_001 << Should I?
For me activating BC Set ZSOLMAN40_SDESK_TEXTTYPES_001 gets the error:
COMV_TEXT_CUST No data found for writing activation links for object COMV_TEXT_CUST.
Also, I think I may have blown it by not doing the piece lists. I have heard differently whether to do it or not and in which client and how to get it form dev to prod.
Also, I could be wrong but I thought SERVICE_DESK_CHANGE_REQUEST_32A was from SolMan 3.2.
Please post if you get it all figured out.
Good luck,
David

Pre-configured MI Client

Hi MI guys,
is it possible to create a pre-configured MI client for deployment?
Question 1:
I want to set the right servers and some other configuration for the standard MI client so that the users don't have to enter something during installation?
Question 2:
What about using a deployment software like enteo Netinstall for installing a basic MI client? My thoughts are, I install and configure a MI client without synchronizing and this will be deployed via Netinstall on the client device (without installation routine of MI client).
Thank you and regards,
Florian

Hi Florian,
The short answer to both of those questions is "yes".
In our environment we used "Wise for Windows" utility to install SAP MI client with required parameters (IP address, SAP system ID, etc.), and then compile new .MSI package with pre-setup parameters.
And yes, we are able now to install it automatically now for our clients via Script Logic. It uses MSIEXEC on the background with "/quiet" option enabled and because of pre-configured settings, no input from end user is required during install process.
I think it should work properly with the other deployment tools, as they uses the similar logic.
Hope this answers your question.
Best regards,
Laziz

How to set 'Background Daemon URL' IN CONFIGURATION TAB ?

Hi All,
While running background job shuduling, i am getting following error :
<b>PLEASE SET 'Background Daemon URL' IN CONFIGURATION TAB.</b>
I have the url, but where to set it in configuration tab ?
Regards,
Anubha

Christian,
This URL http://<servername>:port/webdynpro/dispatcher/virsa/ccappcomp/BgJobStart?debug=1 allows you to view the entries in a given table. You can not insert information here, as you've already noticed. You will need to get your database admin involved. They will need to make these entries for you directly at the db level. Once the db has entered the required values you will then be able to validate that the values are there by pointing to this URL and checking table virsa_cc_config.
Hope this helps
Edit: Updated to the URL in this message to reflect the correct one.
Message was edited by:
Michael Penn

Configuring iOS client in AFARIA 6.6FP1

Hi,
I am trying to configure iOS client in AFARIA6.6FP1.Can anybody please suggest the required steps clearly (if it is possible with screenshots) otherthan refering to standard SYBASE documentation.Looking forward for the reply.Please help me out.
Thanks & Regards,
Sriprasad Shivaram Bhat

Hi Sriprasad,
Not sure if this question is still open as the version is also different now, Afaria 7 has been released.
In-case if you are still looking for answers to any open questions, feel free in posting them here.
There are multiple steps to setup a functioning Afaria landscape. iOS would involve components such as APNS certificate setup, Afaria, Provisioning, Portal Package and CA server setup, optional Relay Server setup, etc.
Afaria installation guide gives you some good steps for installing and setting the environment up.
I hope this helps.
Best Regards,
Shival

OSD with Configuration Manager Clients and PKI certifications

My team and I had just set up PKI Certs on our System Center 2012 R2 Server. We want the opportunity to utilize Out Of Band Management, but we also would like to make our OSD available to the following "Only Configuration Manager Clients." I have
done some testing and have found that without PKI enabled we have been able to use this feature. Once we enabled PKI we could only perform OSD through PXE or Boot Media.
Is there a way to have PKI enabled but also allow OSD's to be available through "Only Configuration Manager Clients"?

Thanks for the reply, I will relay the info concerning OOB. It is not necessarily a technical problem we are running into, more of an inconvenience. OSD works great as long as you make your TS deployment available through Boot media or PXE. Our end goal
is to create a zero touch environment. To do this I was thinking of making the TS available only configuration manager clients. With PKI I loose that capability and it forces me to use boot media or PXE.
Is there a way to have PKI enabled and still be able to deploy TS with only configuration manager clients, and no other deployment method?
Thank you again.

Multiple duplicate Configuration Manager Client (Upgrade) Packages

We have 14x Configuration Manager Client Package / Configuration Manager Client Upgrade Packages in our SCCM2012R2cu1 environment.
We tried deleting all of the packages that were not linked to deployments/task sequences, but a few days later these were re-created with new PackageIDs.
Any ideas what could be causing this? are there some logs we should be checking?
http://oi61.tinypic.com/5nx4.jpg
Thanks!

FROM hman.log:
CheckSQLServiceRestart : SQL Service hasn't been restart since last time we check, skip it.   SMS_HIERARCHY_MANAGER   7/07/2014 6:03:54 AM   1936 (0x0790)
Handle auto-upgrade client configuration changes   SMS_HIERARCHY_MANAGER   7/07/2014 6:03:54 AM   1936 (0x0790)
Update auto-upgrade client configurations   SMS_HIERARCHY_MANAGER   7/07/2014 6:03:54 AM   1936 (0x0790)
INFO: Full client package id XX1001EB exists.   SMS_HIERARCHY_MANAGER   7/07/2014 6:03:55 AM   1936 (0x0790)
INFO: Client upgrade package id XX1001EC exists and upgrade package flag is set to 1.   SMS_HIERARCHY_MANAGER   7/07/2014 6:03:55 AM   1936 (0x0790)
INFO: Client upgrade program Configuration Manager Client Upgrade Program in package id XX1001EC exists and its currently disabled.   SMS_HIERARCHY_MANAGER   7/07/2014 6:03:55 AM   1936 (0x0790)
INFO: Client upgrade advertisement id XX1203B8 exists for package XX1001EC and program Configuration Manager Client Upgrade Program. Deployment is targeted to collection SMS00001.   SMS_HIERARCHY_MANAGER   7/07/2014 6:03:55 AM
1936 (0x0790)
INFO: All client auto upgrade related objects exists. No objects are to be created.   SMS_HIERARCHY_MANAGER   7/07/2014 6:03:55 AM   1936 (0x0790)
INFO: Successfully added client upgrade packages XX1001EC and XX1001EB to all 31 distribution points from site XX1.   SMS_HIERARCHY_MANAGER   7/07/2014 6:03:55 AM   1936 (0x0790)
Wait for site control changes for maximum 3600 seconds...   SMS_HIERARCHY_MANAGER   7/07/2014 6:03:55 AM   1936 (0x0790)

SCCM 2012 R2 Configuration Manager Client Package - stuck "In Progress"

Hi Team; I’m having 2 issues with SCCM 2012 R2:
Issue 1: I'm having a strange issue with the default XXX00002 package - "Configuration Manager Client Package",
it will not deploy to the Secondary Site DP. The console is saying "In Progress" - below is the output from the
distmgr.log file.
~Package BDC00002 does not have a preferred sender.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.443+240><thread=6032 (0x1790)>
~CDistributionSrcSQL::UpdateAvailableVersion PackageID=BDC00002, Version=1, Status=2301
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.444+240><thread=6032 (0x1790)>
~StoredPkgVersion (1) of package BDC00002. StoredPkgVersion in database is 1.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.462+240><thread=6032 (0x1790)>
~SourceVersion (1) of package BDC00002. SourceVersion in database is 1.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.462+240><thread=6032 (0x1790)>
~Package BDC00003 does not have a preferred sender.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.443+240><thread=6092 (0x17CC)>
~CDistributionSrcSQL::UpdateAvailableVersion PackageID=BDC00003, Version=1, Status=2301
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.464+240><thread=6092 (0x17CC)>
STATMSG: ID=2301 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=BBK-SCCM-PRI.bbk2310.com SITE=PRI PID=2768 TID=6032 GMTDATE=Mon Mar 17 20:00:23.476 2014
ISTR0="Configuration Manager Client Package" ISTR1="BDC00002" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="BDC00002"
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.477+240><thread=6032 (0x1790)>
StateTable::CState::Handle - (2301:1 2014-03-17 20:00:23.476+00:00) >> (0:0 2014-02-28 16:33:45.383+00:00)
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.484+240><thread=6032 (0x1790)>
CStateMsgReporter::DeliverMessages - Queued message: TT=1401 TIDT=0 TID='8ACCAE01-5079-4FCD-A988-C1CD3004B698' SID=2301 MUF=0 PCNT=2, P1='PRI' P2='2014-03-17 20:00:23.476+00:00' P3='' P4=''
P5='' $$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.495+240><thread=6032 (0x1790)>
~StoredPkgVersion (1) of package BDC00003. StoredPkgVersion in database is 1.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.496+240><thread=6092 (0x17CC)>
~SourceVersion (1) of package BDC00003. SourceVersion in database is 1.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.497+240><thread=6092 (0x17CC)>
STATMSG: ID=2301 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=BBK-SCCM-PRI.bbk2310.com SITE=PRI PID=2768 TID=6092 GMTDATE=Mon Mar 17 20:00:23.510 2014
ISTR0="Configuration Manager Client Upgrade Package" ISTR1="BDC00003" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400
AVAL0="BDC00003" $$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.510+240><thread=6092 (0x17CC)>
StateTable::CState::Handle - (2301:1 2014-03-17 20:00:23.510+00:00) >> (0:0 2014-02-28 16:33:45.383+00:00)
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.515+240><thread=6092 (0x17CC)>
CStateMsgReporter::DeliverMessages - Queued message: TT=1401 TIDT=0 TID='8ACCAE01-5079-4FCD-A988-C1CD3004B698' SID=2301 MUF=0 PCNT=2, P1='PRI' P2='2014-03-17 20:00:23.510+00:00' P3='' P4=''
P5='' $$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.526+240><thread=6092 (0x17CC)>
CStateMsgReporter::DeliverMessages - Created state message file: D:\Program Files\Microsoft Configuration Manager\inboxes\auth\statesys.box\incoming\1sfb1dbj.SMX
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.571+240><thread=6032 (0x1790)>
Successfully send state change notification 8ACCAE01-5079-4FCD-A988-C1CD3004B698
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.572+240><thread=6032 (0x1790)>
~Exiting package processing thread.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.574+240><thread=6032 (0x1790)>
CStateMsgReporter::DeliverMessages - Created state message file: D:\Program Files\Microsoft Configuration Manager\inboxes\auth\statesys.box\incoming\abaibh8y.SMX
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.637+240><thread=6092 (0x17CC)>
Successfully send state change notification 8ACCAE01-5079-4FCD-A988-C1CD3004B698
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.683+240><thread=6092 (0x17CC)>
~Exiting package processing thread.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.685+240><thread=6092 (0x17CC)>
Sleep 30 minutes...
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:26.886+240><thread=2936 (0xB78)>
~Used 0 out of 3 allowed processing threads.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:27.948+240><thread=4900 (0x1324)>
~Sleep 3600 seconds...
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:27.950+240><thread=4900 (0x1324)>
Sleep 30 minutes...
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:31.934+240><thread=2936 (0xB78)>
~Used 0 out of 3 allowed processing threads.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:33.021+240><thread=4900 (0x1324)>
~Sleep 3600 seconds...
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:33.023+240><thread=4900 (0x1324)>
~Used 0 out of 3 allowed processing threads.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:38.108+240><thread=4900 (0x1324)>
~Sleep 3600 seconds...
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:38.111+240><thread=4900 (0x1324)>
Sleeping for 60 minutes before content cleanup task starts.~
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:06:28.094+240><thread=4968 (0x1368)>
Sleep 30 minutes...
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:30:52.271+240><thread=2936 (0xB78)>
Sleep 30 minutes...
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 17:01:10.002+240><thread=2936 (0xB78)>
~Used 0 out of 3 allowed processing threads.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 17:01:10.977+240><thread=4900 (0x1324)>
~Sleep 3600 seconds...
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 17:01:10.979+240><thread=4900 (0x1324)>
Sleeping for 60 minutes before content cleanup task starts.~
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 17:06:55.337+240><thread=4968 (0x1368)>
Issue 2: I'm trying to deploy a couple of Packages/Applications using SCCM 2012 R2 running on Win2K8 R2 with no luck, knowing that I could install the packages
on a test VM “in the DataCenter site”, but when trying to deploy the packages to production PC “in the Office Site”,
the status is packages deployment compliance stuck at 0%
Infrastructure:
3 SCCM servers: CAS, PRI & SEC. Both CAS and PRI are in the DataCenter site, and SEC is in the Office site. The office site has several IP subnets.
Boundaries are configured through Forest Discovery “IP Ranges and AD Sites” since that the AD site should contain all the IP subnets that the AD site contains, Boundaries groups are also configured and a site reference
server is configured for each group respectively.
A OU based Collection has been configured that contains 13 PC "the collection contains the PCs that the packages should be installed.
Packages/Applications are configured correctly since that I could successfully deploy the packages to the test VM which is on the same subnet as the CAS and the PRI servers "the DataCenter subnet". The issue
is that I can't deploy the packages to production PCs in the Office subnet!
Firewall rules are configured and applied via GP, and I even turned Windows Firewall off, and still nothing! I tried to manually initiate Computer Policy download via the SCCM GUI and via a script, still no luck!
I tried configuring IP Subnet Boundaries, still no luck!!
Here are the last 2 lines in the LocationServices.log of a client PC at the Office Site:
<![LOG[MPLIST requests are throttled for 00:00:44]LOG]!><time="14:47:00.766+240" date="03-17-2014" component="LocationServices" context="" type="2" thread="5776"
file="lssecurity.cpp:4528"> <![LOG[Current AD site of machine is Default-First-Site-Name]LOG]!><time="14:47:00.777+240" date="03-17-2014" component="LocationServices" context="" type="1"
thread="4884" file="lsad.cpp:770">
And here are the last 4 lines in the ClientLocation.log
<![LOG[Rotating assigned management point, new management point [1] is: BBK-SCCM-PRI.bbk2310.com (7958) with capabilities: <Capabilities SchemaVersion="1.0"><Property Name="SSLState"
Value="0"/></Capabilities>]LOG]!><time="14:49:04.880+240" date="03-17-2014" component="ClientLocation" context="" type="1" thread="3600" file="lsad.cpp:6311">
<![LOG[Assigned MP changed from <BBK-SCCM-PRI.bbk2310.com> to <BBK-SCCM-PRI.bbk2310.com>.]LOG]!><time="14:49:04.891+240" date="03-17-2014" component="ClientLocation" context="" type="1"
thread="3600" file="lsad.cpp:1532"> <![LOG[Rotating proxy management point, new management point [1] is: BBK-SCCM-SEC.bbk2310.com (7958) with capabilities: <Capabilities SchemaVersion="1.0"><Property Name="SSLState"
Value="0"/></Capabilities>]LOG]!><time="14:49:05.345+240" date="03-17-2014" component="ClientLocation" context="" type="1" thread="3600" file="lsad.cpp:6374">
<![LOG[Rotating local management point, new management point [1] is: BBK-SCCM-SEC.bbk2310.com (7958) with capabilities: <Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities>]LOG]!><time="14:49:05.786+240"
date="03-17-2014" component="ClientLocation" context="" type="1" thread="3600" file="lsad.cpp:6436">
It looks like clients in the Office Site can’t connect to the DP/MP of the Secondary Site server which is also a DP.
While on the PC that the application was installed on I see the folowing in the LocationService.log:
<![LOG[Distribution Point='http://BBK-SCCM-PRI.bbk2310.com/SMS_DP_SMSPKG$/Content_69547d2a-339f-4ac4-9523-238c79ff8a52.1', Locality='LOCAL', DPType='SERVER', Version='7958', Capabilities='<Capabilities SchemaVersion="1.0"><Property
Name="SSLState" Value="0"/></Capabilities>', Signature='http://BBK-SCCM-PRI.bbk2310.com/SMS_DP_SMSSIG$/Content_69547d2a-339f-4ac4-9523-238c79ff8a52.1.tar', ForestTrust='TRUE',]LOG]!><time="14:42:59.506+240"
date="03-17-2014" component="LocationServices" context="" type="1" thread="224" file="lsutils.cpp:415"> <![LOG[Calling back with locations for location request {144620BC-4BF0-4878-9554-F67D305ECCF8}]LOG]!><time="14:42:59.522+240"
date="03-17-2014" component="LocationServices" context="" type="1" thread="224" file="replylocationsendpoint.cpp:220">
Is there something wrong with the Distribution point on the Secondary Site server?
Please help…
Thanks..

Update:
I fixed the issue with the default XXX00002 package - "Configuration Manager Client Package", it will not deploy to the Secondary Site DP. I did that through "Update Distribution Points" option, and after a while the status was 100%.
However; the second issue is still unsolved...
Please help..

Unable to copy hidden package "Configuration Manager Client Package" to local DP

Content status lists it as successfully distributed to all DPs (including the local site server)
However, component status for SMS_DISTRIBUTION_MANAGER continually logs these events:
Distribution Manager failed to process package "Configuration Manager Client Package" (package ID = CDW00001).
Possible cause: Distribution manager does not have access to either the package source directory or the distribution point.
Solution: Verify that distribution manager can access the package source directory/distribution point.
Possible cause: The package source directory contains files with long file names and the total length of the path exceeds the maximum length supported by the operating system.
Solution: Reduce the number of folders defined for the package, shorten the filename, or consider bundling the files using a compression utility.
Possible cause: There is not enough disk space available on the site server computer or the distribution point.
Solution: Verify that there is enough free disk space available on the site server computer and on the distribution point.
Possible cause: The package source directory contains files that might be in use by an active process.
Solution: Close any processes that maybe using files in the source directory. If this failure persists, create an alternate copy of the source directory and update the package source to point to it.
NOTE: It appears to not be any of these causes.
If I look at the smsdpmon.log on the server in question, the following is logged every half hour:
Intializing DP Monitoring Manager...    SMS_Distribution_Point_Monitoring 1/2/2013 1:29:45 PM 2840 (0x0B18)
Getting monitoring thread priority SMS_Distribution_Point_Monitoring 1/2/2013 1:29:45 PM 2840 (0x0B18)
Getting content library root path SMS_Distribution_Point_Monitoring 1/2/2013 1:29:45 PM 2840 (0x0B18)
Getting site code SMS_Distribution_Point_Monitoring 1/2/2013 1:29:45 PM 2840 (0x0B18)
Getting algorithm ID SMS_Distribution_Point_Monitoring 1/2/2013 1:29:45 PM 2840 (0x0B18)
Failed to find algorighm ID from registry. Use default algorithm. SMS_Distribution_Point_Monitoring 1/2/2013 1:29:45 PM 2840 (0x0B18)
Getting DP Cert Type SMS_Distribution_Point_Monitoring 1/2/2013 1:29:45 PM 2840 (0x0B18)
Failed to find DP cert type from registry. Use default type. SMS_Distribution_Point_Monitoring 1/2/2013 1:29:45 PM 2840 (0x0B18)
Getting this DP NALPath SMS_Distribution_Point_Monitoring 1/2/2013 1:29:45 PM 2840 (0x0B18)
Failed to create certificate store from encoded certificate..
An error occurred during encode or decode operation. (Error: 80092002; Source: Windows) SMS_Distribution_Point_Monitoring 1/2/2013 1:29:45 PM 2840 (0x0B18)
Failed to initialize DP monitoring object. Error code: 0x80092002 SMS_Distribution_Point_Monitoring 1/2/2013 1:29:45 PM 2840 (0x0B18)
distmgr.log shows the following:
STATMSG: ID=2304 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=BRICK-CONFIGMGR.corp.COMPANY.com SITE=CDW PID=2212 TID=2124 GMTDATE=Wed Jan 02 19:29:45.109 2013 ISTR0="CDW00001" ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="CDW00001"   SMS_DISTRIBUTION_MANAGER   1/2/2013 1:29:45 PM   2124 (0x084C)
Retrying package CDW00001   SMS_DISTRIBUTION_MANAGER   1/2/2013 1:29:45 PM   2124 (0x084C)
No action specified for the package CDW00001.   SMS_DISTRIBUTION_MANAGER   1/2/2013 1:29:45 PM   2124 (0x084C)
Start validating package CDW00001 on server ["Display=\\BRICK-CONFIGMGR.corp.COMPANY.com\"]MSWNET:["SMS_SITE=CDW"]\\BRICK-CONFIGMGR.corp.COMPANYNAME.com\...   SMS_DISTRIBUTION_MANAGER   1/2/2013 1:29:45 PM   2124 (0x084C)
Failed to start DP health monitoring task for package 'CDW00001'. Error code: -1   SMS_DISTRIBUTION_MANAGER   1/2/2013 1:29:45 PM   2124 (0x084C)
Updating package info for package CDW00001   SMS_DISTRIBUTION_MANAGER   1/2/2013 1:29:45 PM   2124 (0x084C)
Only retrying local DP update for package CDW00001, no need to replicate package definition to child sites or DP info to parent site.   SMS_DISTRIBUTION_MANAGER   1/2/2013 1:29:45 PM   2124 (0x084C)
StoredPkgVersion (2) of package CDW00001. StoredPkgVersion in database is 2.   SMS_DISTRIBUTION_MANAGER   1/2/2013 1:29:45 PM   2124 (0x084C)
SourceVersion (2) of package CDW00001. SourceVersion in database is 2.   SMS_DISTRIBUTION_MANAGER   1/2/2013 1:29:45 PM   2124 (0x084C)
STATMSG: ID=2302 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=BRICK-CONFIGMGR.corp.COMPANYNAME.com SITE=CDW PID=2212 TID=2124 GMTDATE=Wed Jan 02 19:29:45.213 2013 ISTR0="Configuration Manager Client Package" ISTR1="CDW00001" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="CDW00001"   SMS_DISTRIBUTION_MANAGER   1/2/2013 1:29:45 PM   2124 (0x084C)
Failed to process package CDW00001 after 41 retries, will retry 59 more times   SMS_DISTRIBUTION_MANAGER   1/2/2013 1:29:45 PM   2124 (0x084C)
Exiting package processing thread.   SMS_DISTRIBUTION_MANAGER   1/2/2013 1:29:45 PM   2124 (0x084C)
Used 0 out of 3 allowed processing threads.   SMS_DISTRIBUTION_MANAGER   1/2/2013 1:29:50 PM   3784 (0x0EC8)
Sleep 1825 seconds...   SMS_DISTRIBUTION_MANAGER   1/2/2013 1:29:50 PM   3784 (0x0EC8)

Both errors are certificate related. Is there anything special about your configuration such as special ACLs on the certificate store or FIPS compliance mode (see
http://support.microsoft.com/kb/811833) being enabled?
Nothing special with certificates; I've used the basic stuff for intranet management of clients.
The only related thing I can think of that may have affected this, is that I discovered earlier today that my MP installation got hosed (error 500) due to a broken client install on the site server itself. I uninstalled the client manually and the server
(as indicated by the component status views) appears to have repaired the MP install. Perhaps it didn't repair it completely? Would a site reset do me any good?

Set Microsoft Outlook as the default mail client.

Every time I am trying to sync my calendar, notes and mail account with my iPhone through iTunes I keep getting a notifactions saying 'Either there is no default mail client or the current mail client cannot fulfill the messaging request. Please run Microsoft Outlook and set it as the default mail client'.
The problem is that Outlook IS the default client.
Why can iTunes not complete this task for me...
Microsoft Office Professional Plus 2010 Build 14.0.4536.1000 64-bit.
Thanks.

I'm getting this and it's really annonying. The Nokia PC Suite provided a basic but functional PC calendar. Surely there's a simple PC client for the iPhone Calendar somewhere. I use Outlook Express and started using Outlook 2002 to manage my calendar but since a recent iTunes upgrade it's stopped working, giving this "default mail client" error. When I set Outlook to be the default mail client it made no difference.
Apple - you've scored an own goal here. Something that did work now doesn't work, and the only thing that's changed is your software.
I don't doubt it's down to compatability with M$ Outlook Add-ins, but they've not changed.

How to configure dhcp client identifier

Hi Everybody,
The DHCP client ID is an id that is unique for DHCP clients at least in the same subnet. Usually the client uses MAC-address as Client-Identifier in the DHCPDISCOVER message. The Client-Identifier may be different other than MAC-Address, For example a FQDN name, as per the RFC 2132 Ref, (code 61).+_
Usaually, we use the following to bind the ip address based on MAC-address
pntadm -r SUNWfiles -p /var/dhcp -A 10.42.32.86 -i '0:3:ba:a5:a9:93' -a 10.42.32.80
At server side, I am using the following for specifying the FQDN name.
pntadm -r SUNWfiles -p /var/dhcp -A 10.42.32.86 -i 'one.atr.com' -a 10.42.32.80
and at client side, I am inserting the following entry in the /etc/default/dhcpagent file
CLIENT_ID='one.atr.com'
But this is not working. What I am doing wrong.
+1. At the server side, then how to assign the ip addresses to the clients , if the Client-Identifier is FQDN name in the DHCPDISCOVER message other than MAC-Address.+
+2. How to configure the client-identifier as FQDN name at client side.+
Please help me,
Thanks Inadvance,
Mummaneni.

Sandman,
Here is an example of a router acting as a DHCP server. Please remember that you have to exclude IP addresses that you don't want to lease out.
ip dhcp pool example
import all
network 192.168.1.0 255.255.255.0
dns-server 1.2.3.4
default-router 192.168.1.1
ip dhcp excluded-address 192.168.1.1 192.168.1.149
ip dhcp excluded-address 192.168.1.200 192.168.1.254
HTH,
Mark

Set Software Update to never check on client?

For now, rather than figure out Software Update service, which seems more complicated than some other services, I'm going to push updates out over ARD to my clients (>25 Macs). I'm setting up the managed prefs for these clients using Workgroup Manager, and I would like to have the clients never check for software updates. I can't seem to find a managed pref to set this. Does it exist? Or, can anyone tell me the key and other settings to just manually enter this by hand in Workgroup Manager? I can't seem to find the check frequency setting anywhere on my personal Mac (not in /Library/Preferences/com.apple.SoftwareUpdate nor in the ~/ version). Is there another way to prevent client machines from automatically checking Apple's SU servers short of making that change on every client individually? I guess I could set it before making my NetRestore image, but I'd rather do it through Workgroup Manager.

I don't know how to do it through Managed Client, though I expect that you probably can.
You can do it manually in Terminal.app using 'softwareupdate --schedule off'. To do multiple systems, use ARDs Send UNIX Command function.

Configuration Manager client upgrade package failing to download to DPs

Hello,
I am receiving the following error in distmgr.log "Failed to get RDC signature path for for package SF100004 version 1. Error = 2"
"SF100004" is the "Configuration Manager client upgrade package"
Is there a way to rebuild/repair this package?

Yes, I did find out how to fix the problem. I had to use a power shell script to call WMI on the site server to manually force a refresh of the package having problems.
$SiteCode = "SF1"
$PackageID = "SF100004"
$distpoints = Get-WmiObject -Namespace "root\SMS\Site_$($SiteCode)" -Query "Select * From SMS_DistributionPoint WHERE PackageID='$PackageID'"
foreach ($dp in $distpoints)
$dp.RefreshNow = $true
$dp.Put()

Set Up CTS+: Webdynpro CTS_BROWSER - configure Organizer client in TMS

Similar Messages

Maybe you are looking for