Set up default goods recipient for confirmations in SRM
Hi,
Client has setup one of the user as Default " Goods reciepent" for the Purchasing group and that seemes to be not working (might be removed), now I need to set the same user as default goods recipent for the same Purchasing group
Wanted to know the possible ways?
Reagrds,
Jairaj Mahaling
Dear Jairaj,
You can define the user as default value for the attribute 'Requester ID' for the purchasing group. Then, the system will propose the same user as the default goods recepient for the purchasing group.
regards,
Ranjan
Similar Messages
-
Want Central Goods Recipient for all users
Hi All,
We want to manitain Central Goods Recipient for all users, now the Recipient is the Goods reciever.
How will we do configuration for this.
We have 5 users in one Org. Unit, how we will make one as default.
Thanks
RaviSatish,
I did not quite get what you are trying to say.Could you please be more detailed.The below is my requirment and we are on ECS.
I want to have a specific user as the central goods receipent.This user must be able to confirm goods and services for PO's created by all other users in that organization.
My understanding from this thread is that,this can be achived by assigning the role "SAP_BBP_STAL_RECIPIENT",to that user and that user will be able to confirm goods and services for all PO's created by other user also.I tried to do the same and expected to see all PO's created by all other users when i click "Confirm Goods/Services centrally" .
Thanks -
Change requestor and goods recipient for PO's in SRM
We have an issue where we want to change the Requestor and goods recipient for PO's in SRM as the requestor is leaving the organization. Do we have any way possible to change the Requestor adn goods recipient for SRM PO's?
I have found bbp_crr, but it only list partly confirmed/invoiced POs. I'm not sure if the transaction is suppose to do the mass change.
Thank you
JoannHello,
The report BBP_CRR suggests all the POs assigned to a requisitioner , that are to be assigned to a new requisitioner/recipient and that are not closed.
Once the POs are suggested , you can change for all the POs or make your own selection.
Hope this information was useful.
Regards,
Kalyan -
How do I set the default welcome page for PUBLIC user
gurus,
i'm using -
Oracle 9i Database
Oracle 9ias Portal Release 2
QUESTION => how do I set the default welcome page for the PUBLIC user.
i did the following to achieve this -
1. logged into portal
2. clicked on builder
3. clicked on administer tab
4. selected PUBLIC user in the Portal User Profile portlet
5. went to the preferences tab
6. in the default home page selected a custom page group
7. logged out of portal
8. open a new browsere session
9. type the portal URL and i get the login page ....??
i'm unable to understand this behavior ... shouldn't i be getting the page group that i set for the PUBLIC user in step 6 above ....
the second QUESTION is => when the user logs out he/she should see the PUBLIC page set in step 6 above ... but, instead the user sees a page that is as follows -
Partner Application Name Logout Status [Logout Status]
Oracle Portal (portal) logout status
The SSO Server (orasso) checkmark
buzz.resva.trw.com:7778 checkmark
infrastructure.happy.resva.trw.com checkmark
portal1.buzz.resva.trw.com checkmark
portal2.sylvester.resva.trw.com checkmark
sylvester.resva.trw.com:7778 checkmark
so, how can i set the default page for the PUBLIC user and also a page when he user logs out.
ideas anyone ....?
thanx a bunch.
heroHi,
The sequence of operation you are doing to set the home page for public users is correct. You are getting the login screen as the "custom page group" selected as "home page" has not been granted to public.
Also, while logging-out, it is normal behaviour to get the screen where it shows the list of partner applications from where user has been logged-out. When you click on "Return" button, you will get to the "home page" set above.
Hope it clarifies the things.
Regards,
Ved -
How can I set the default home page for all new users in Firefox 4
I'm trying to deploy FF 4.0rc1 in a corporate environment but I can't find a way to set the default home page or any other settings for that matter.
Is there a way to set the default home page for all new users and lock it so that the users can't change home page?
Best regards
JonasIn Firefox 4 the template folder for new profiles (C:\Program Files\Mozilla Firefox\defaults\profile\
) doesn't exist. You can create that \defaults\profile\ folder and place a file user.js in it with the prefs that you want to initialize.
See:
*http://www-archive.mozilla.org/catalog/end-user/customizing/briefprefs.html
You can also use a mozilla.cfg file to set the default value for prefs.<br />
See: http://kb.mozillazine.org/Locking_preferences
defaultPref(); // set new default value
pref(); // set pref, but allow changes
lockPref(); // lock pref, disallow changes -
Is it possible to set a default music player for the music on my external while still keeping my iTunes the default player on my Mac ?
Message was edited by: PellseidonThere is no setting in the iPhone to set another default music player. The default is Music. If you are using another application, you are at the mercy of how that application operates as far as what occurs when it stops or errors out. The car is looking for music to play.
-
How to set the default maximum size for java's heap?
Hi!
Im trying to set the default max size for the java heap - but not from the command line.
I would like to set it higher as default on my computer.. how can I do that?
thanks!>
...You may increase the memory heap only when you're launching a new JVM.>Much like IWantToBeBig does.
OTOH, it this is an app. with a GUI, it is easier to launch it using webstart, and request extra memory in the JNLP descriptor (the webstart launch file). -
Simple/silly question: how do I set/change default font/color for outgoing mail messages?
Just a suggestion..........
Download Thunderbird. Easier to use when it comes to what you want to do w/your emails. -
How do I set the default print margins for ALL printers in mozilla.cfg
How do I set the default print margins for ALL printers in mozilla.cfg, even ones that are not yet installed / connected to the computer?
I'm trying to install firefox with MDT and apply certain print options, but the printers themselves are connected at a later stage so the print.printer_myprinterhere cannot be used.Best answer I could find: [https://mike.kaply.com/2012/03/16/customizing-firefox-autoconfig-files/#comment-132668]
If you can figure out how to add the printer name, this can be used to lock the margins. -
How to Set A Default Start Time For New Events In Calendar?
How to Set A Default Start Time For New Events In Calendar?
John,
Thanks for that suggestion - could not get it to work. However, I did manage a different approach. I finally determined the sequence of events in terms of how the various events and listeners fire (I think).
Basically, the CalendarActivityListener fires, followed by the listener associated with the Calendar object's Create facet, followed finally by the CalendarEventListener - the final is where the TriggerEvent is available and then finally, control is passed to the popup/dialog in the Create facet. So, my approach of trying to set/get the TriggerDate in the user's HTTP session was doomed to failure because it was being get before it had been set :(
Anyway, I ended up adding a bit of code to the CalendarEvent listener - it grabs the current BindingContext, navigates through the DCBindingContainer to derive an Iterator for the ViewObject which drives the calendar and then grabs the currently active row. I then do a few tests to make sure we're working with a "new" row because I don't want to alter start & end dates associated with an existing calendar entry and then I define the Start and End dates to be the Trigger Date.
Works just fine. Snippet from the listener follows
BindingContext bindingContext = BindingContext.getCurrent();+
*if ( bindingContext != null ) {*+
DCBindingContainer dcBindings = (DCBindingContainer) bindingContext.getCurrentBindingsEntry();+
DCIteratorBinding iterator = dcBindings.findIteratorBinding("EventsView1Iterator");+
Row currentRow = iterator.getCurrentRow();+
if ( currentRow.getAttribute("StartDate") == null)+
currentRow.setAttribute("StartDate", calendarEvent.getTriggerDate());+
if (currentRow.getAttribute("EndDate")==null)+
currentRow.setAttribute("EndDate", calendarEvent.getTriggerDate());+
*}* -
How to set a default colour & thickness for rectangle in preview?
How to set a default colour & thickness for rectangle(annotation) in preview ? Because every time that I choose for example red and thickness 1 it reverts to orange and 3 next time .
Doesn't appear to be a default setting. Peruse the webpage for Secrets at http://secrets.blacktree.com/ for a possible setting.
-
How to set different default interactive reports for different user groups?
I'm probably overlooking an obvious solution, but how do I set different default interactive report for different user groups?
For the same interactive report, I want one set of users to see a default where the default filter is based on column X. However, another group of users doesn't have authorization to see that column so I need to set the default filter to something else for them.
ThanksYou can set a filter on a report in a URL - would that help? I think with apex 4.x you can also link to a saved default report or alternative report...
-
How to set a default output device for FAX outputs
Hi Experts,
Business requires to set a default output device for fax outputs ( Medium as 2 Fax medium ).
as fas as print output ( medium as 1 print medium ) is considered we can maintain output device in condition record--> communication
I tried maintaining output device in VP01 for my condition type based on sales org but it did not worked.
Can you please suggest ways to achieve default output device for fax outputs.
Thanks,Well, obvious solution would be to either update user profiles or change the output from 'process immediately' to 'process by a background job'. Then create a generic user ID with any fax number desired and use that user ID to process the output through the background job.
This is not really an SD question, so if this simple option doesn't work for you, I'd suggest to discuss other custom solution with your ABAP / Basis team. -
How to set a default Billing type for a particular Delivery type
Dear All,
How to set a default billing type for a particular delivery type.
My requirement is, we are creating delivery for a Stock Transport Order. Delivery type is NL and the Purchase order type is UB.
When we are creating Billing, it should take Billing type "ZSTO" by default, which is the customised Billing type.
Where we have to do this setting?
In case of normal sales order, this control will be available in the Sales order document types.
In case STO, how to set a default billing type for a delivery type (NL).
Regards,
RajeshThere is a customization available here no default or hard coded
Normally in a sales doc type we mention which billing type system has to pick
If the billing happens from a PO which billing type system will take depends on the controls set in the areas mentioned below
Go to your delivery type OVLK (say your delivery type is NL)
In that there is a field called default order qty in the order reference tab (say if you maintained DL there)
This DL is called PSEUDO order type
Then in VOV8 for DL based on the billing types mentioned ,system will take the billing doc
For delivery related billing say if you mention say ZF8 in the details of DL in VOV8(provided you have created ZF8)
Then while you bill the delivery doc of NL system will take ZF8
For intercompany delivery you can create ZIV billing type also Pure customization
PO is linked to delivery type ( MM spro settings)--Del type linked to order (pseudo) type---in order type (pseudo) we mention the billing types. Here the flow is bit different that pure SD flow
Though the invoice is crated by manually putting customized Biiling Type and A/Cing doc also generated, but in the VF04 still system shows the same deliveries pending with Billing Type (F2).
This manual is not reqd if the said assignments are done properly
Hope it can assist you.
Thanks & Regards
JP
Edited by: J Prakash on Jun 23, 2010 4:05 PM -
Want to set a default zoom level for safari? Here's how you do it.
If you like to set a default zoom level for safari so you don't have to hit Ctrl+ (or Ctrl-) every time you start Safari and open a new tab, here's how you can do that. This should work on Safari for mac, too:
1) create a file named defaultzoom.css (or any name you like, just make sure it has a css extension.)
2) copy and paste in the following:
body {
zoom: 130%;
change 130 to whatever number suits you. >100 means zoom in, <100 means zoom out. Don't forget the % percent sign!
3) in safari, go to Preferences > Advanced. Under style sheet, select Other... and point to the file you created.
4) you may need to restart safari for the change to take effect.
Voila. Hope that helps someone.Yes you are right!
This CSS zooming is a crude hack. I think it basically treats a web page like a pdf document where you just enlarges everything.
When you zoom manually, safari does a smarter sort of zoom where it enlarges but tries to keep widths of the elements the same size, reflowing text where needed and scrolling only when necessary.
If the web page has a fixed size that is smaller than your browser window, like this forum, css zoom works ok. But with a page like gmail, which has no width constraint, you get into trouble.
Hmm, wait, I just checked out wiki, which also uses up all available screen real estate, but does NOT have this problem.
Notice in gmail, even if you zoom way out below what should be 100%, the login is still off the screen. The font gets real small but the width of the page stays the same. The css zoom basically "sticks" and isn't completely reversible.
Bottom line: you have to decide which is more annoying: having to hit Ctrl+ for every tab you open, or running into some problematic pages.
On Windows, I use autohotkey (a kdb and mouse macro scripting program) to switch off the CSS on the fly when I need to. I think Mac has similar capability built in, right? If I were really clever, I guess I could program autohotkey to send a few ctrl+ whenever it detects a new window or tab in safari, but I'm not there yet.
Bottom bottom line: Apple needs to add this feature. It's a pretty basic accessibility feature. Doesn't Apple have like an accessibility guru/advocate?
Maybe you are looking for
-
How do i make it happen so I can use two seperate iMac computers as one set-up with one keyboard and one mouse?
-
Backup and Restore of DQS (Data Quality Service SQL 2012) Databases
We are currently using DPM 2010 running on Server 2008 R2 as our backup solution. We will soon be leveraging the Data Quality Services in SQL 2012 along with the Master Data Service. In the SQL 2012 documentation from Microsoft it states, "The bac
-
i recently purchased windows xp sp2 online and im waiting for it. But i had a couple of questions.... im running on a macbook pro 13" with snow leopard and when lion comes out i want to buy it. But will lion ruin my windows xp if i have it installed
-
Download "photo library" & "picture" to pc
I have been able to download "camera roll" to my PC, but the files labeled "Photo Library" and "Picture" will not show when I open the camera to download (on PC>Guy's iphone>Camera Tasks>Get Pictures). Please respond with the steps I need to take to
-
Can I transfer apps to my daughter's iPod Touch??
I had an iPod Touch that both my daughter and I used so I had lots of kids games on it. I lost this iPod and got a new one. When I got my new one I downloaded all those apps again without any problems. I have now found that old iPod Touch so I gave t