Set up delivery report on 6700 slide

My misses has just got a 6700 slide but I can't find how to set up delivery reports or view the memory card.
Im sure it very obvious but any help will be very appreciated
Thanks

You're welcome, and I assume your network DOES support it !
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

Similar Messages

Date Wise Pending Delivery Report

Hi all,
I need a pending delivery report as per the date which user enters. For ex on a particular date what were the pending deliveries and total pending stock which was to be delivered.
Is there any standard report or any Function module available. If not, is there any logic by which we can fulfill this requirement.

VL06 gives same data as VL06O/VL06i and gives only real-time delivery status (you can't look at 07/10/2011 date & see what delivery documents were pending PGI, only can see latest delivery status as of now for that date).
So, If "historical" data is needed for past date and status of delivery documents at that time, then need to go with BI report or similar reporting tool where you can set specific parameters like take snap-shot of table(s) of open deliveries due for PGI but not PGI'd on specific date/time.

Delivery report shows status of Pending for external address. Email sent to both internal and external addresses.

We have an Exchange 2013 on-premise server and seem to have an issue with emails sent to internal and external users at the same time.
The issue came to light because someone sent an email to 44 recipients, of which one was internal. None of the external recipients received the email. I checked the delivery report in the EAC and found the internal email marked as 'Delivered' and all of
the external ones marked as 'Pending'. I checked the queues and there were none. I did some testing and sent an email to just one of the external addresses on the list, it arrived. I tried sending the email again to all of the recipients, the external ones
all showed 'Pending'. I tried it again, but this time excluded the internal email address and all of the 43 external emails were immediately delivered.
So it seems that the issue only arises when we are sending to both internal and external addresses.
I then tried a test email to one internal address and one external address. The Delivery report says that the internal address was delivered immediately, while the external address is 'Pending' and gives more information saying: 'Message delivery is taking
longer than expected. There may be system delays. For more information, contact your helpdesk.'. To add further mystery to this, the email was actually delivered.
So, I have two concerns:
First is seems that some emails sent both internally and externally are only arriving internally. This is a huge problem because I don't know how many have been affected. There may be many lost emails we don't know about.
Second, it looks like I can't trust the delivery report. It says pending for some emails which didn't arrive, but it also says pending for some which did arrive. That is no good at all.
For info the server is running Windows Server 2012. I have run a Microsoft Update to check if there are any to apply and the only Exchange one is a spam filter update, which I doubt has any bearing but I will apply when I get chance.

Hi Neil,
According to the description, I find a related KB on Exchange 2010:
https://support.microsoft.com/kb/2694474?wa=wsignin1.0
It has the similar situation as yours.
This issue occurs because a function in a message tracking component tries to obtain the information for the recipient instead of the external recipient.
Please try to upgrade to the latest Exchange update to check whether this issue can be solved.
Also please check whether Throttling has been set.
Please run "Get-TransportService | fl" to check the MaxOutboundConnections parameter value.
More details to see:
Message throttling
http://technet.microsoft.com/en-us/library/bb232205(v=exchg.150).aspx
Thanks
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Mavis Huang
TechNet Community Support

Delivery Report (Pending)

I'm having some issues with some emails in a pending state and I can not see why?
on the delivery report I get the following: -
Pending 27/05/2014 17:31 ExchangeServer1.domain.local The message has been transferred from ExchangeServer1.domain.local to ExchangeServer2.domain.local. 28/05/2014 09:27 ExchangeServer1.domain.local No further information is available about this message
because the logs are no longer available.
Most of the recipients received the email but there are 7 that are on Pending?
Any ideas on how to track why these are set to pending?
Matthew John Earley BSc (hons) || www.o0MattE0o.myby.co.uk

Hi,
According to your further description, I understand that all distribution group members have reveived the message successfully but the delivery reprot indicates the message is still pending for 7 recipients.
Please check whether the issue can be reproduced in your Exchange server. If there is any third-party program in your Exchange server, please disable it to have a try. Also have a test to verify if the issue only occurs when sending messages to many distribution
group members. How about expanding the distribution group and directly sending messages to 50 users? If there is any event logs about it, please collect them for further analysis.
Thanks,
Winnie Liang
TechNet Community Support

6700 slide - keeps trying to connect to internet

I recently bought the nokia 6700 slide and have been having the same problems as others, with the screen saver etc
One which I haven't seen coming up before though is that at random times a display box comes up on my screen asking whether to connect via O2 WAP or O2 internet, even when I'm not using the internet or not even touching the phone! I'm not sure if it's some fuction on the phone that is trying to connect or what.
It wasn't bothering me that much until this morning when my alarm didn't go off. When I looked at my phone the little display box was on the screen and only when I cancelled that did the alarm go off. A text message also came in when the display box was cancelled, although it had been sent an hour earlier.
I can't really rely on the alarm function until I get this sorted out so if anyone has any tips, they'd be much appreciated!

try these
Menu > Settings > Connectivity > Admin. settings > SIP settings
Delete any profile defined in there.
Menu > Settings > Connectivity > Admin. settings > Packet data
Set "Packet data connection" to "When needed
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Exchange 2013 Delivery Reports not working correctly

Hello,
I'm trying to use the "delivery reports" tool in ECP and it is not acting normally. Here's the situation:
When I try to search a mailbox ([email protected]) for mails that were sent to [email protected] (a distribution group) I only see results that were sent from [email protected] to [email protected] Not all the messages in [email protected]'s mailbox that were sent to [email protected]
So in summary, instead of showing all messages in that mailbox, it shows me all messages on [email protected]'s mailbox that were sent by [email protected] to [email protected]
I have used Exchange Online, which should be almost the same as Exchange 2013 but this was not the behavior before. Can this be a wrong setting somewhere? Can it be related to anti-spam (GFI) software on the serer? Any ideas?

Hi,
How did you use delivery reports tool to track messages ? Is it like below?
*Mailbox to Search: [email protected]
Search for messages sent to: [email protected]
In general, it will show all the messages in [email protected] which were sent to
[email protected], however, if the mailbox has applied any retention policys to delete emails or move the emails to local pst, it may cause your issue.
More information about "Delivery Reports" for your reference:
Track Messages with Delivery Reports
Thanks.
Niko Cheng
TechNet Community Support

How can I get a mail delivery report

Does anyone know how I can set mail to send me a delivery report when a message I have sent has been read?
Thanks
Rach

http://email.about.com/od/macosxmailtips/qt/etrequestrecp.htm
Have fun.

So confused with my 6700 slide

Have just got a new 6700 slide and there are so many things I can't work out that I'm just about ready to throw it out the window! If anyone could answer any of these I'd be incredibly grateful.
Ok:
Firstly it keeps telling me it is unable to access my contacts that are saved on my sim card, and sometimes it tells me to insert my sim card, even though it is clearly inserted. What am I doing wrong? the handbook says I should have been given the option of accessing them when I first entered contacts, but I don't think I was...should I restore it to factory settings and try again???
Secondly, to do this, is says I need a lock code - is that something I should know or be able to access?? If not, does that mean I'm not able to restore it to factory settings?
Third: Please tell me there's a way of getting rid of all the awful boxes and messages on the "desktop" page?? I dont want to set up my email, share my photos or see my calendar entries as soon as i turn on my phone, i just want simply the background, so how do I get rid of them?
Ok these are the things imediately confusing me but I have no doubt there will be more. Please help me if you can.
Thank you.

Well yes ! Two things actually, first read the user guide, and secondly Tick my green star !!!
But you can also check your shortcuts and active stndby settings in personalisation-standby !!
Nokia phones are actually quite easy to use, rather than getting frustrated, play about with it for a while, you'll struggle to break it , and you may find you do want one or two shortcuts once you get used to it
Good Luck
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

6700 slide...help help help help help help.pleeeaa...

i have just changed from N95 8GB to 6700 slide.i had almost 4gb of videos and pic in my n958g,so i bought an 8gb micro sd for my new 6700 slide.i tranfered all vids and pics from n958gb on to the card via card reader.i inserted mmc in to 6700 slide and all vids and photos are visable in gallery-images,all photos are ok BUT the vids keep sticking when playing apart from one which has appeared in vid clips.i have just blue tooted a vid from 6700 slide to 5800 and 5800 is playing perfectly which proves the card is ok.why is this hand set not playing my vids without sticking?
please help ,these are vids i cant lose.

For what its worth, I had a similar issues and called the UK helpline & technical support number. A guy called Glenn was right on the button with what he thought had gone wrong and he was right. From my perspective, this was an issue with an out of warranty iPad, however, due to Glenn's product knowledge, he was able ascertain what had gone wrong during the iOS 3.2.2 to iOS 5.1 upgrade. This saved me time, money and has restored my faith in Apple as a quality brand. I suggest you call the UK help line. I previously called the American line and, no offense, but they were unable to fix anything. As is often the case, it comes down to skilled individuals who actually care about the company they work for. Call Glenn and his colleagues; they will put you right.

Exchange 2013 Delivery Reports - Why does it not show forwarded mail?

We just migrated from 2010 to 2013 and all seems to be working well... We started using EOP at the same time with only a few hiccups. Our Get-MessageTrackingLog command shows all of our email that was delivered or failed, etc... but when I try to run
"Mail Flow -> Delivery reports", it forces me to select a mailbox and I leave the other fields empty - and it only shows emails that come directly to me. The problem is, I have half a dozen email accounts that are set to forward their email
to my exchange account. None of those emails show up with the delivery reports method - but they DO show up via the powershell get-messagetrackinglog command...
With EOP I can see all the emails if I use "Mail Flow -> Message Trace"... why does it work with EOP, but on our local box - it's nerfed to just emails who specify my direct exchange address?

Hi,
I have tested to use Delivery Reports to search my manually forward messages in my Exchange 2013 CU1 environment. And the forward messages can be searched and listed in the Search results.
Please make sure the users who forwarded emails to you are in your organization and they are sending
messages by using the Microsoft Outlook or Outlook Web App email clients. Because Delivery Reports doesn’t track messages send from POP or IMAP email clients. For more information about Delivery Reports, please refer to:
http://technet.microsoft.com/en-us/library/jj150554(v=exchg.150).aspx
Additionally, I also tested auto-forward scenario:
User1 is configured to auto-forward messages to User2 in Exchange side(for details, please click
here), when User3 sends a message to User1, the message is forwarded to User2 automatically. If so, when we use Delivery Report to search this forward message for User2, we
need to use Search for messages received from User3 instead of User1 to get this forwarded message.
Thanks,
Winnie Liang
TechNet Community Support

6700 slide - Customize camera pictures storage fol...

Dear friends,
My parents' 6700 slide, when set in Spanish language, will store camera pictures at /Images/Cámara ("a" with an accent). But when the phone is connected by USB cable to my printer, the printer won't "see" that directory, showing no pictures at all.
I see that if I change folder name to "Camera", the printer will see it correctly, but then, the phone will create a new empty "Cámara" folder, and storing there all the new pictures.
I know setting the phone in English lang creates the folder "Camera" without accent, but when reverting to Spanish, it keeps on storing at the Cámara (spanish) folder.
My parents can't use the phone in spanish, and it's very disappointing to then not to be able to plug the phone to the printer and print some snaps
Do you know how could I change the storage folder name? Any "hidden setting" or trick?
Thks in advance!
Lluis

this model does not support tv out
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

6700 slide- can't setup E-mail

Hi,
I have problem setting up E-mail on 6700s.
I open email setup wizard and select gmail, then enter id and password. After this, I get a message saying ' Detecting e-mail settings" and it returns to the same screen where we have the email accouts like ovi, yahoo, gmail etc. are listed.
Somebody pls help.
thanks.

Hello, Hopefully you have fixed your problem but if not you could try the following. (I've just got a 6700 slide and have struggled to set my e-mail up too - its now working perfectly!)
Contact your mobile provider and ask them to send the e-mail settings for the 6700 to your handset.
Then go to the Nokia web page for e-mail settings for the 6700. If you carefully set up everything they suggest it does eventually work. S

6700 Slide: text alerts, and getting rid of a star...

I have never posted on anything like this before so please bear with me.
I have a new 6700 slide, but there are 2 things I can't get used to, having had a Samsung phone before.
1. (The worst thing) - if a text comes in, and I don't happen to hear the buzzy tone thing, then I don't get another reminder, and there is no visible sign on the phone that there is a new message unless I open the slide. Even then it doesn't tell me who the message is from and I have to go to the inbox. Is there a way of getting more than one alert? I really don't like this.
2. Every time I turn the phone on it asks me to set up my email preferences. I don't want to use it for email but even if I cancel it, it asks me again next time I turn it on. Can I stop it asking once and for all?
3. Is there a way of marking text messages for deletion, without having to mark just one (very time consuming) or all (which you might not want to do)?
I would be really grateful for any help on one or all of these questions. I really wanted a Nokia but now I am pining for my Samsung.
Emm
Solved!
Go to Solution.

3. Is there a way of marking text messages for deletion, without having to mark just one (very time consuming) or all (which you might not want to do)?
when your inbox is open select options then scroll down list you will see mark all
. (The worst thing) - if a text comes in, and I don't happen to hear the buzzy tone thing, then I don't get another reminder, and there is no visible sign on the phone that there is a new message unless I open the slide. Even then it doesn't tell me who the message is from and I have to go to the inbox. Is there a way of getting more than one alert? I really don't like this
it wont tell you who its from anyway the s40 nokia phones do
there is an app called remind me
here
http://store.ovi.com/content/36148?clickSource=search
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Requesting Delivery Reports

I know that there was many questions so far asking delivery reports, but I could not find what i look for.
I want to set delivery request to a MimeMessage so that any other mail server is able to respond with a delivery report. I know that not all servers support delivery reports but it's enough to get reports from supporting servers.
How can i request delivery reports from different servers? and do they have a standart report format? How can i get these reports? by transportListener ?

Hi Mr Shannon;
Creating a new class as you describe should
work fine when constructing a message, but it
won't be used when reading a message from
a server.
As you said the new class is not used to read message.
Finally, you seem to be unwilling or unable
to provide the entire protocol trace that
shows the problem with the BODYSTRUCTURE
so I can't help you there.
The entire protocol trace is appended to message
I also don't understand what you mean by
"it is look like without body".
I tried to open the message with another mail clients such as outlook and thunderbird but only header fields are seen. (Human readeble message, the first bodypart, isnot shown)
DEBUG: no connections in the pool, creating a new one
* OK Microsoft Exchange Server 2003 IMAP4rev1 server version 6.5.7226.0 (myserver.myserver.net) ready.
A0 CAPABILITY
* CAPABILITY IMAP4 IMAP4rev1 IDLE LOGIN-REFERRALS MAILBOX-REFERRALS NAMESPACE LITERAL+ UIDPLUS CHILDREN AUTH=NTLM
A0 OK CAPABILITY completed.
IMAP DEBUG: AUTH: NTLM
A1 LOGIN admin 123456
A1 OK LOGIN completed.
A2 SELECT INBOX
* 1 EXISTS
* 0 RECENT
* FLAGS (\Seen \Answered \Flagged \Deleted \Draft $MDNSent)
* OK [PERMANENTFLAGS (\Seen \Answered \Flagged \Deleted \Draft $MDNSent)] Permanent flags
* OK [UNSEEN 1] Is the first unseen message
* OK [UIDVALIDITY 92302] UIDVALIDITY value
A2 OK [READ-WRITE] SELECT completed.
A3 LIST "" INBOX
* LIST (\Marked \HasNoChildren) "/" INBOX
A3 OK LIST completed.
A4 FETCH 1 (ENVELOPE INTERNALDATE RFC822.SIZE FLAGS BODYSTRUCTURE BODY.PEEK[HEADER.FIELDS (X-mailer X-OriginalArrivalTime X-Priority X-Ertelenmis X-SonGecerlilik X-EklentiVar)])
* 1 FETCH (ENVELOPE ("14 Sep 2007 11:24:52 +0300" "Read: try" ((NIL NIL "admin" "myserver.net")) ((NIL NIL "admin" "myserver.net")) ((NIL NIL "admin" "myserver.net")) ((NIL NIL "admin" "myserver.net")) NIL NIL NIL "<30167826.01189759114438.JavaMail.admin@umit>") INTERNALDATE "14-Sep-2007 11:24:52 +0300" RFC822.SIZE 547 FLAGS () BODYSTRUCTURE (( "report" ("report-type" "disposition-notification" "boundary" "----=_Part_3_14323815.1189759114423") NIL NIL) "report" ("report-type" "disposition-notification" "boundary" "----=_Part_3_14323815.1189759114423") NIL NIL) BODY[HEADER.FIELDS (X-mailer X-OriginalArrivalTime X-Priority X-Ertelenmis X-SonGecerlilik X-EklentiVar)] {87}
X-OriginalArrivalTime: 14 Sep 2007 08:24:52.0343 (UTC) FILETIME=[B914B870:01C7F6A8]
A4 OK FETCH completed.
A5 FETCH 1 (ENVELOPE INTERNALDATE RFC822.SIZE)
* 1 FETCH (ENVELOPE ("14 Sep 2007 11:24:52 +0300" "Read: try" ((NIL NIL "admin" "myserver.net")) ((NIL NIL "admin" "myserver.net")) ((NIL NIL "admin" "myserver.net")) ((NIL NIL "admin" "myserver.net")) NIL NIL NIL "<30167826.01189759114438.JavaMail.admin@umit>") INTERNALDATE "14-Sep-2007 11:24:52 +0300" RFC822.SIZE 547)
A5 OK FETCH completed.
A6 FETCH 1 (UID)
* 1 FETCH (UID 21)
A6 OK FETCH completed.
A7 FETCH 1 (BODY.PEEK[HEADER.FIELDS (X-Priority)])
* 1 FETCH (BODY[HEADER.FIELDS (X-Priority)] {2}
A7 OK FETCH completed.
A8 FETCH 1 (BODY.PEEK[HEADER.FIELDS (X-Ertelenmis)])
* 1 FETCH (BODY[HEADER.FIELDS (X-Ertelenmis)] {2}
A8 OK FETCH completed.
A9 FETCH 1 (BODY.PEEK[HEADER.FIELDS (X-SonGecerlilik)])
* 1 FETCH (BODY[HEADER.FIELDS (X-SonGecerlilik)] {2}
A9 OK FETCH completed.
A10 FETCH 1 (FLAGS)
* 1 FETCH (FLAGS ())
A10 OK FETCH completed.
A11 FETCH 1 (BODYSTRUCTURE)
* 1 FETCH (BODYSTRUCTURE (( "report" ("report-type" "disposition-notification" "boundary" "----=_Part_3_14323815.1189759114423") NIL NIL) "report" ("report-type" "disposition-notification" "boundary" "----=_Part_3_14323815.1189759114423") NIL NIL))
A11 OK FETCH completed.
javax.mail.MessagingException: Unable to load BODYSTRUCTURE
at com.sun.mail.imap.IMAPMessage.loadBODYSTRUCTURE(IMAPMessage.java:1244)
at com.sun.mail.imap.IMAPMessage.getContentType(IMAPMessage.java:414)
at javax.mail.internet.MimeBodyPart.isMimeType(MimeBodyPart.java:1013)
at javax.mail.internet.MimeMessage.isMimeType(MimeMessage.java:951)
Thanks
Edited by: messagecount on Sep 14, 2007 10:50 AM

Getting message tone with delivery report in Nokia...

Whenever i send a txt message , with every delivery report i get a message tone which is very annoying. Solution please.. :s

Hi Jayoza,
Try going under Profile personalisation and set Warning Tones to OFF, then check again.
Also go Messaging-->Settings-->Service message-->set to 'OFF'.
We would recommend you to try one after the other and see which one will help. But report back and let us know if this has helped.
Regards,
haZey
If you find this post helpful, a click upon the white star at bottom would always be appreciated.
If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

Set up delivery report on 6700 slide

Similar Messages

Maybe you are looking for