Set up disk for PXIMA MX430

The set up disk will only go so far, then I get an error message saying the printer driver is in use

Hello giles.
Please try using the latest drivers from our website to see if this may resolve your issue.
Visit the following link to access the latest downloads.
http://www.usa.canon.com/cusa/consumer/products/printers_multifunction/office_all_in_one_inkjet_prin...
This didn't answer your question or issue? Find more help at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Similar Messages

Can I use new install disks for older computer?

I have a new MBP (which I'm very excited about!). I am going to pass my two-year old MBP to one of my college kids. I would like to wipe it clean as he will be transferring all of his own info onto it from his current MBP (which will then be passed down to another college kid). I can't find the original install disk. Can I use the ones that came with the new machine?

No. The install disks are specific to the model they ship with.
I've read that a Retail copy of Snow Leopard will allow you to essentially do a 'fresh' install of the OS, but it does not include the diagnostics and configuration features of your original system disks.
You can call Apple and order a replacement set of disks for a nominal charge (around $40, I think I've read.) Since you're keeping it in the family, that would be an important thing to have with the Mac in case you cannot locate the originals.

Set up disk freezing

My set up disk (for i-Pod & i-Tunes) freezes in the middle of the download. Never used to. Is it a disk problem, or my PC?

The software CD could be damaged, why not go to apple site and download the both latest versions

I need to configure a new hard disk as backup disk for time machine. The set up program is running and it says it will take 9 days to backup about 56 GB. Is it normal ?

I need to configure a new hard disk as backup disk for time machine.
The set up program is running since two hours and it says it will take 9 days to backup about 56 GB.
Is it normal ?

Roberto 17 wrote:
I started this morning at 12 and after 5 hours now the backup is about 6 GB up on 56 GB.
The new HD is a WD My Passport Edge 500 GB capacity
5 hours to do 6 GB of transfer is NOT normal, even for USB 2.0 so there's something wrong here. I'd say cancel it, wipe the drive and then test the integrity of the drive. Do some file transfers over to and see if it's behaving normally. It could be a bad USB cable, it could be a bad drive or bad enclosure. As it's new, I suspect you haven't really put it through its paces yet and it's important to do that first before commissioning it to serve as your "reliable backup."

Hello!, my name is jan and i am using lightroom 2 for many years. I have an original set-up disk with a 24 digit serial number. I had never problems wih installation of lightroom. suddenly lightroom refuses to start when I try to from a picture i have tak

Hello!, my name is jan and i am using lightroom 2 for many years. I have an original set-up disk with a 24 digit serial number. I had never problems wih installation of lightroom. suddenly lightroom refuses to start when I try to from a picture i have taken with my nikon D500 and transferred to WINDOWS 8.1. i have tried to re-install lightroom : the procedure asks for the serieal number , but refuses to accept the number that always worked. PLEASE help!! jan

If you are certain you have the right serial number, there really isn't much we can help you with here. You might try downloading and installing the last version of Lightroom 2. It will be the trial version, but when the trial screen appears there is an option to indicate that you have a serial number. Incidentally, Lightroom serial numbers start with the first four digits being 1160.
Adobe - Lightroom : For Windows : Adobe Photoshop Lightroom 2.7 - English, French, German

Can I set up a startup disk for another computer?

My mom has an iMac and apparently the internal disk has failed. Starts up with the disk and question mark, and running the Disk Utility can't access or format it.
I was going to get an external disk for her to use as a startup disk and was wondering if I can set it up from my computer then send it to her to use with hers. I have an iBook G4 and it would be much easier for me to connect the new drive to my computer, install Mac OS X on it, set up accounts, then install updates. I have DSL and she has dialup, so downloading updates on her system literally takes all night.
I guess I'm wondering if the installer gears the system to work with the hardware it's being run on, or if it doesn't really matter.
Thanks for any input.
Dan

Dan:
Welcome to Apple Discussions.
If your Mom's computer supports Firewire, and meets the minimum system requirements for Tiger or the minimum system requirements for Panther depending on which system you plan to install, it should be fine. In terms of the legality, I am not sure if having the system installed on an external HDD runs afoul of the Software License Agreement which statesThis License allows you to install and use one copy of the Apple Software on a single computer at a time. This License does not allow the Apple Software to exist on more than one computer at a time...On the other hand if you Mom has the install disk and just can't get it on the internal HDD, there should be no problem.
Please don't hesitate to post back with further questions.
Good luck.
corneliius

Set a timeout for "read from text file"

I Need to read from a text file on a remote pc and use the read from text file function to do this. It wotks but sometimes this pc is down causing long wait times in my vi.
Is there a way to set a timeout for the read from text file function, or is there an other solution?
Thank you

You could check that the path is valid first before you attempt to read the file. hen put the file read in a True-False case structure based on the results of the check. You can use the function "Check if File or Folder Exists" It checks whether a file or folder exists on disk at a specified path. This VI works with standard files and folders as well as files in LLB files. The function is found in the File I/O --> Advanced File Functions palette.
Tom

How can I make a bootable disk for Mountain Lion?

How can I make a bootable disk for Mountain Lion?

Make Your Own Mountain/Lion Installer
1. After downloading Mountain/Lion you must first save the Install Mac OS X Mountain/Lion application. After Mountain/Lion downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the Mountain/Lion installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing.
2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
Open Disk Utility in your Utilities folder.
After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
Click on the Erase button. The format process can take up to an hour depending upon the flash drive size.
3. Locate the saved Mountain/Lion installer in your Downloads folder. CTRL- or RIGHT-click on the installer and select Show Package Contents from the contextual menu. Double-click on the Contents folder to open it. Double-click on the SharedSupport folder. In this folder you will see a disc image named InstallESD.dmg.
4. Plug in your freshly prepared USB flash drive. You are going to clone the content of the InstallESD.dmg disc image to the flash drive as follows:
Double-click on the InstallESD.dmg file to mount it on your Desktop.
Open Disk Utility.
Select the USB flash drive from the left side list.
Click on the Restore tab in the DU main window.
Select the USB flash drive volume from the left side list and drag it to the Destination entry field.
Drag the mounted disc icon from the Desktop into the Source entry field.
Double-check you got it right, then click on the Restore button.
When the clone is completed you have a fully bootable installer that you can use without having to re-download Mountain/Lion.
Note: The term Mountain/Lion used above means Lion or Mountain Lion.

In need of system disks for HD repair

The machine's been a little slow lately, so I randomly decided to "verify disk" in disk utility and got this response:
Verifying volume “Macintosh HD”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Checking volume bitmap.
Volume Bit Map needs minor repair
Checking volume information.
Invalid volume free block count
(It should be 1870686 instead of 1866823)
The volume Macintosh HD needs to be repaired.
Error: The underlying task reported failure on exit
Disk Utility stopped verifying “Macintosh HD” because the following error was encountered:
The underlying task reported failure on exit
1 HFS volume checked
Volume needs repair
I realize that I need to repair the disk from another volume. I purchased this computer 2 years ago from a private seller, and do not have the original system disks. Do I need OS 10.3 to do this since Tiger is only an upgrade? Do I need just the DVD or what? And where can I obtain these disks? Should I just head straight to DiskWarrior instead? Thanks
-mJ

What are the capabilities of the retail disks? Am I able to do a clean install from them if necessary, or would I need disks with my specific build number for that? Some people on craigslist are selling the retail disks for 10.4, but I believe its just the DVD. Ideally I know I should have both disks, but in this event can I be able to buy only the one I need? The only disks that I see sold privately are build-specific sets....just seems a little much to spend 300 bucks for the Tiger box just for volume repair. Just making sure before any purchases. Thanks
-mJ
Message was edited by: Mckendre Jay
Message was edited by: Mckendre Jay

Set Up Disk Full

I am getting a Set Up Disk full error and am not quite sure what this means. I have been deleting or saving pictures to an external hard drive but I am still getting this error. I don't know what the set up disk is and how it is getting full. Can someone please answer this question?
Thanks.

For information about the Other category in the Storage display, see this support article. If the Storage display seems to be inaccurate, try rebuilding the Spotlight index.
Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
iPhoto ▹ Empty Trash
Do the same in other applications, such as Aperture, that have an internal Trash feature. Then restart the computer. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation—not the mythical 10%, 15%, or any other percentage. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Ask for instructions in that case.
See this support article for some simple ways to free up storage space.
You can more effectively use a tool such as OmniDiskSweeper (ODS) or GrandPerspective (GP) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one. Note that ODS only works with OS X 10.8 or later. If you're running an older OS version, use GP.
Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS or GP can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
Install the app you downloaded in the Applications folder as usual. Quit it if it's running.
Triple-click anywhere in the corresponding line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
sudo /Applications/GrandPerspective.app/Contents/MacOS/GrandPerspective
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. Ignore any other messages that appear in the Terminal window.
The application window will open, eventually showing all files in all folders, sorted by size. It may take a few minutes for the app to finish scanning.
I don't recommend that you make a habit of doing this. Don't delete anything as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with the app, quit it and also quit Terminal.

When I try to use the internal hard drive as a scratch disk I get this error "unable to set scratch disk- the selected directory is on write protect or non-writable media. Any ideas on how to fix this. It only happens in fcp.

When I try to use the internal hard drive as a scratch disk I get this error "unable to set scratch disk- the selected directory is on write protect or non-writable media. Any ideas on how to fix this. It only happens in fcp.

By internal, I assume you're referring to your systems (boot) drive. Is it, by chance, a partitioned dive?
Also…although many people successfully use their systems drives as scratch disks, over time you'll have better results using a dedicated drive for your media.
Good luck.
Russ

My macbook pro hard drive died. I only have a windows hard drive and an old powerbook G4 which of course you can't use to create a boot disk for my macbook. How can I solve this?

I can't get app store on my old power book to download OS X, My macbook pro hard drive died and all I have is a windows hard drive, still has windows os on it, a 500 Gb USB drive and this power book. How can I get my macbook back up without spending money? Thanks

And what happens if the OPs Mac is of a newer version that came with a version of Snow Leopard above the 10.6.3 version that is on that Retail, meant for Upgrade, disc? Like if it came with 10.6.4/.5/.6/.7? That disc you linked to would not work.
He needs to contact Apple and get a replacement set of Original System Reinstall Discs. That is the only way he can be assured it will work and he would also get the iLife apps which he wouldn't buying that DVD disc you linked to.
dwb wrote:
The Snow Leopard DVD is $20 from Apple. You'll just have to wait a few days. BTW this is a full installer that works with any model computer that can run SL. Apple used to ship recovery/installation disks that were tied to specific computer models so that a 15" MBP installer disk coudn't be used on a 13" MBP computer. So you need either full installer or the recovery disks for your specific model.
And BTW, I have a 2009 13" MBP w/8GB RAM that is running Mavericks. With a 5400 RPM drive I used to experience a bit of beach balling (think hour glassing) but an SSD has given it new life. It feels now slower than the newest MBPs - it obviously benchmarks considerably slower but in everyday use it doesn't feel like a 4 1/2 year old computer at all.

I have a Macbook Pro 1,2 (2008) running OS 10.6.8 and trying to install Boot Camp but don't have original disk for drivers. What to do?

I have a MacBook Pro 1,2 (2008) running OS 10.6.8 and trying to install boot camp with windows xp and don't have my original disk for drivers. What do I need to do?

Call Applecare and ask them to send you a replacement set. The will charge you a nominal fee for shipping and handling.
Allan

How to make boot disk for MacBook Pro with Mavericks pre-installed

Hi -
I recently bought a new 15" MacBook Pro with Retina Display, which came pre-installed with Mavericks (10.9.0). I want to make a bootable USB disk of the system software, and have successfly used DiskMaker X (formerly Lion DiskMaker) to make the USB boot disks for Lion and Mountain Lion. In those cases, however, I was running earlier versions of the OSX, and downloaded the new OSX version -- Lion and Mountain Lion -- from the App Store in order to make to make the disk. In this case, however, Mavericks was pre-installed, and I was unable to download it from the App Store (an alert said that it couldn't be installed on this computer... presumably because it was already installed). I would apprecite any suggestions as to how I can create the boot disk without the ability to download Mavericks. Thanks very much for any help anyone can provide.
Shelly

Open App Store and locate the full installer download file (5.29 GBs) for 10.9.1. Download to your computer.
Make Your Own Mavericks, Mountain/Lion Installer
After downloading the installer you must first save the Install Mac OS X application. After the installer downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing.
2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
Open Disk Utility in your Utilities folder.
After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the leftside list. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
Select the volume you just created (this is the sub-entry under the drive entry) from the left side list.
Click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
Click on the Erase button. The format process can take up to an hour depending upon the flash drive size.
3. Use DiskMaker X to put your installer clone onto the USB flash drive.
Make your own Mavericks flash drive installer using the Mavericks tool:
You can also create a Mavericks flash drive installer via the Terminal. Mavericks has its own built-in installer maker you use via the Terminal:
You will need a freshly partitioned and formatted USB flash drive with at least 8GBs. Leave the name of the flash drive at the system default, "Untitled." Do not change this name. Open the Terminal in the Utilities folder. Copy this command line after the prompt in the Terminal's window:
sudo /Applications/Install\ OS\ X\ Mavericks.app/Contents/Resources/createinstallmedia --volume /Volumes/Untitled --applicationpath /Applications/Install\ OS\ X\ Mavericks.app --nointeraction
Press RETURN. Enter your admin password when prompted. It will not be echoed to the screen so be careful to enter it correctly. Press RETURN, again.
Wait for the process to complete which will take quite some time.

I see that many people have already complained about Itunes' backup encryption. I NEVER set a password for it (and the corresponding option is still unticked, as always) yet it asked me for a pwd when I upgraded my 3GS to the 5.0 OS. How to solve this?

I see that many people have already complained about Itunes' backup encryption. I NEVER set a password for it (and the corresponding option is still unticked, as always) yet it asked me for a pwd when I upgraded my 3GS to the 5.0 OS. How to solve this?

To prevent others from reading your mail, don't give them access to your account. If others need to use your computer for some reason, set up personal accounts, or a guest account, and switch to it before allowing them access. This is the simplest, and most effective, method.
Email message files can be read as plain text in TextEdit or any word processor.
To protect your email messages from being viewed by others while in your account, you would have to lock the folder, putting it into an encrypted disk image that required a password to be opened and mounted. You would have to double-click on the image and give your password to mount it before launching Mail then unmount it as soon as you're done. My guess is that you could replace the ~/Library/Mail folder with an alias pointing to the folder on the disk image.
It may work, but it seems like a lot of unnecessary hassle.

Set up disk for PXIMA MX430

Similar Messages

Maybe you are looking for