Set up network and internet, main computer cannot 'see' base station
OK, I am too stupid. My network was fine in the old place, after moving houses I reconnected the old way but it wouldn't work. I connected, i Mac, a powerbook and ipod touch. This is what I did:
connected dsl modem to wan port on AE station
connected lan between iMac and AE station.
Resulted in all devices connecting to my network, no devise, not even the i Mac, connects to the internet, saying PPPoE host could not be found. ipod touch say safari could not find the server, but I think it basically means the same.
Next, I tried to re-configure the AE station but the administration program on the iMac does not list my AE station, though my powerbook does. Reconfigured via powerbook but with the same result.
Is there anyone who can make sense of what I wrote above? Advise would be much appreciated.
Thanks for the advice. Yes, my ISP requires PPPoE and the AE was configured this way originally. I am not sure if I disabled PPPoE on all my other devices. Checked system preferences on the iMac (that is the main computer) but when I open the 'network' pane it says 'your configuration was changed by another program' (sorry this is translated as I am running the OS in German) and won't accept any input, not even quitting the system preferences.
One more new thing, I tried to access the AE by putting the address and password in. iMac seem to find the AE but comes back with the message 'error occurred when reading the configuration'.
Similar Messages
-
I am trying to set up iCloud on my PC. My congtrol panel doesn't have Network and Internet.
How do I set up iCloud on my PC when I don't have Network and Internet on my control panel?
Try rebooting the device. It should be in Settings right under General. You may need to go to Settings<General<Reset<Reset All Settings (don't erase data) and setup as a new device. The iCloud login should appear during this step. Just keep setting it up, then go back to settings and see if the iCloud tab appears.
-
iPod touch second generation. Trying to sync to mac. Have updated itunes and snow leopard. When I plug it in, it is recognized in iphoto, not itunes. ipod is freezing. Have tried several times to set back to factory settings, but computer wont see it
Try here:
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X -
We have 3 people in our household and one main computer, is it possible to have 3 seperate accounts on one computer?
Welcome to the Apple Community.
You would need to create 3 user accounts on the computer. -
Airport Express as an end point on a wireless network and connect a computer via the ethernet port?
Can I use my Airport Express as an end point on a wireless network and connect a computer via the ethernet port? - I'm wanting to connect a computer that does not have wireless and is in another building.
The requirements for this to work are:
1) The AirPort Express must be the 802.11"n" version. Model Number is A1264
2) There must be adequate wireless signal stength where the Express will be located
3) The Express must be configured to "join" the wireless network with the option checked to activate the Ethernet port -
I just purchased an extreme. I have an express. The sales guy recommended setting up a hot spot with the express and use the extreme as a base station. What does he mean and how do I do this? What are the advantages? How do I set this up?????
I think he means to set up the main extreme as the main router or "main base station", and then use the express to "extend" the network.
You can look up the manual for your express here for more details:
http://support.apple.com/manuals/
Extend the range of your network by adding AirPort Express to your existing AirPortExtreme or AirPort Express wireless network (this is called a Wireless DistributionSystem, or WDS). "
Extending the Range of an Existing AirPort Extreme or
AirPort Express Network
You can extend the range of an existing AirPort Extreme or AirPort Express wirelessnetwork by setting it up in a WDS. Wireless computers can connect to the network andshare the Internet connection, share files, and play network games. If you connect yourAirPort Express to your home stereo, computers on your wireless network can useAirTunes to play music on the stereo from iTunes. If you connect a USB printer to yourAirPort Express, all of the computers on the network can print to it.
n Open the AirPort Setup Assistant on a Macintosh, or the AirPort Express Assistant on acomputer using Windows XP. Follow the onscreen instructions to extend the range ofyour AirPort Extreme or AirPort Express network.
Note: Extending the range of a network using WDS may reduce overall networkperformance. -
I have just purchased and installed a new Airport extreme base station but now the Airport Utility cannot see my old Airport Express. Are their compatibility issues and do I need to purchase a new Express?
When you can, take a look at the old AirPort Express and locate the model number in the faint print on the side of the device.
If you see A1084 or A1088, this is an older Express version that is no longer supported by the current version of AirPort Utility that you are using with the new AirPort Extreme.
If that is the case, your Express is at least 6 years old...probably older...so it is about time to treat yourself to a new version with much faster speeds and more features. -
Mobile link is switched on , on my iPad and iPhone but i cannot see documents currently on my iPad, on my iPhone?
Hi gordons94276907,
We regret for the inconvenience caused to you however i would like to know certain facts so that i can assist you better:
Are you unable to see documents on the cloud on both of your devices- iPad and iPhone?
Try opening cloud.acrobat.com and check if your files are synchronized on the server ?
Regards,
Rahul -
Currently use Airport Express -1st Generation-to access internet -purchased 2014 Airport Extreme base station -can I import Express back up configuration to keep current settings . Or is it best to do new Airport Extreme as a new Network .
Just spoke with Cisco about the router. They said the router is compatible with the E1500. They suggested that I contact Apple to see if their default IP address was that same as the router (192.168.1.1). They told me I would have to change it if that was the case. How would I do that?
-
Mac Book pro can't connect to Internet through Apple airport extreme base station
I had problems connecting to the internet in the past with my macbook pro. One day it suddenly started working again but then I bought a second apple TV I lost connectivity. I have tried changing the IP address manually and while it shows me connected to the wifi I am still with out internet. When I hooked up the new Apple TV that I bought it booted my computer from it's ip address. The apple TV though wouldn't work and now nor would my computer. I ended up setting the Apple TV's ip address manually and now it works fine. My computer on the other hand does not no matter if I set it manually or not. Even if I plug in the ethernet cable from the base station it doesn't work. It show that it has a self assigned IP address. After I set it manually it shows that I am connected both via wifi and the ethernet cable but I can't connect to the internet. If I plug the modem directly into the computer bypassing the base station I get internet and it is using the IP address that worked originally.
It has something to do with the connection from the base station to my computer but this is odd considering every other device I have: iPhone 4, apple tv, apple tv, apple mini with retina display all work perfectly via wifi (newest apple tv had to be set manually as I stated above but now works fine). When I check the ip of the base station itself it seems to be different from the ip of the computer when the computer was connected directly to the router. I don't understand why my computer now can't connect to the internet via the base station whether it be wifi or by ethernet. Can you please help me trouble shoot this?
I have an AirPort Extreme base station which allows up to 50 users and a 30 meg connection speed.
I have a MacBook Pro (17-inch Early 2009), OS X Mavericks (10.9.2)It has something to do with the connection from the base station to my computer
I don't think so..
I just posted a reply which totally vanished.. strange strange website now.
Please post some screenshots of your AE setup from the airport utility.. I want to see the summary page, then the network and internet tab.
Please tell us what modem you use.. is it a router??
If you have satellite or 3G wimax etc service they often are limited to 5 IP addresses... the AE takes one and then 4 more devices can join .. no more.
You need to also give us the screenshot of the IP you are getting in a computer that works.
EDIT
Sorry this is half double post.. the previous page refused to display.. now it has returned.. -
IPhone as internet port for an Airport Base station
I wondered if it was possible to use the iPhone tethering feature to provide an internet connection to my Airport Base station? Is there some way of connecting the USB from an IPhone an Airport Base station to replace my existing broadband?
Thanks in anticipation
Will-SI HAVE A AIRPORT BASE STATION I BOUGHT AS A MANAGER
SPECIAL FROM COMPUSA BUT DONOT HAVE THE WEP PASSWORS
CAN SOME ONE PLEASE HELPRESETTING IT TO IT ORIGINAL
STATE
Do a factory reset
Resetting the AirPort Extreme Base Station
http://docs.info.apple.com/article.html?artnum=107451
Resetting AirPort Express
http://docs.info.apple.com/article.html?artnum=108044
iFelix -
Computer - computer network and internet sharing
I apologise if this has been discussed elsewhere - please point me to any useful links.
I have a G4 iMac and iBook (running 10.4.6) both with airport extreme cards installed. I would like to use a computer to computer connection for file / printer sharign and most importantly to share the ethernet connection to the internet running through my iMac.
I would be extremely grateful if someone could point out how to do this and incorporate a practicable level of security (I don't want any of the hundreds of people in adjacent flats downloading lord knows what through my connection).
Having accomplished this, I then need to be able to create a similar connection when required so that when required I can share the internet connection from the iMac with our PC laptop running Windows XP service pack 2.
So, the simpler the better, instructions for creating a computer - computer network for internet and file sharing between two Macs and following that between the Mac with the internet connection and a Windows laptop.
Thank you very much in advance.
G4 iMac USB 2.0 / G4 iBook Mac OS X (10.4.6)You don't need to setup up computer to computer connection if your using internet sharing. Once you start internet sharing then your 2 computers are connected togther.
I would be extremely grateful if someone could point out how to do this and incorporate a practicable level of security (I don't want any of the hundreds of people in adjacent flats downloading lord knows what through my connection).
The problem you have is that if you enable internet sharing on one of your macs to share its connection over airport then the only level of security you can enable is WEP encryption.
The problem with WEP encryption is that it offers no real security and can easily be cracked. WPA is the only security you should consider using and unfortunately OSX does not have WPA encryption functionality when using the built in internet sharing function.
Your best solution is to get a wireless router that has a SPI firewall an WPA encryption. Depending on what your current internet connection is and how it is provided would determine the best kind of router to get. -
I have Comcast Internet and have it connected to a Motorla Surfboard modem and have that running directly to a 2TB Time Capsule. The TC is serving as our time machine as well as our wireless router. We lost power in a storm a week ago and can no longer connect to my wireless network I can see the network and sign into it via password, but cannot connect with any device(iMac, MacBook, iPhones, iPod touches, air tv, etc.). ALL of these devices worked gat before the power went out. I reset both modem and TC and still can't connect. I can connect to the Internet through Ethernet cord directly from the modems dn have confirmation(per Comcast service) that the Internet is working and we have a good connection.
The TC is less than six months old so I'm not sure what is wrong. I have reset settings with TC to no avail. I have reset the TC SEVERAL times and have no idea what could be wrong and what is prohibiting me from connecting. Anyone that has ANY suggestions or ideas as to how to fix this, PLEASE HELP!!! I'm going crazy using iPad 3G and not being able to connect to our wifi. THANKS FOR YOUR TIME AND I LOOK FORWARD TO GETTING BACK TO THE 21ST CENTURY!Anyone have any ideas or information to help with this? Any help and consideration is MUCH appreciated.
-
Bluetooth Network and Internet sharing issue
I'm trying to set up a network through Bluetooth between two computers having the latest Toshiba Stack installed, and to share the Internet connection with the second computer.
On the firs computer I've set the Internet Connection Sharing, and because of this it automatically sets the TCP/IP adresses for the Bluetooth Personal Area network (192.168.0.1).
On the 2nd computer, i've set everything to obtain it automatically. Firewalls (Kaspersky) disabled.
When I connect the 2 Bluetooth devices, everything looks fine, the 2nd automatically obtains the IP adress, I can ping both computers, and the Internet also works on the 2nd computer, for a few seconds! After that, it appears like the 2nd computer is disconnected from the network... what could be the problem?
In the event viewer under the System tab, I've found Informations like these:
2nd comp:
The system detected that network adapter \DEVICE\TCPIP_{E44D18EB-91F5-4... was connected to the network, and has initiated normal operation over the network adapter.
The browser has forced an election on network \Device\NetBT_Tcpip_{E44D18EB-... because a master browser was stopped.
and at 1st comp also appeares this:
The system detected that network adapter Bluetooth...Area Network - Packet Scheduler Miniport was disconnected from the network, and the adapter's network configuration has been released. If the network adapter was not disconnected, this may indicate that it has malfunctioned. Please contact your vendor for updated drivers.================================================== =========================
Interface List
0x1 ........................... MS TCP Loopback interface
0x2 ...00 17 31 27 e6 10 ...... Intel(R) PRO/1000 PL Network Connection - Packet Scheduler Miniport
0x20004 ...00 60 52 0b 53 e3 ...... Realtek RTL8029(AS) PCI Ethernet Adapter - Packet Scheduler Miniport
================================================== =========================
================================================== =========================
Active Routes:
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 195.222.104.193 195.222.104.219 20
127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1
192.168.0.0 255.255.255.0 192.168.0.1 192.168.0.1 30
192.168.0.1 255.255.255.255 127.0.0.1 127.0.0.1 30
192.168.0.255 255.255.255.255 192.168.0.1 192.168.0.1 30
195.222.104.192 255.255.255.224 195.222.104.219 195.222.104.219 20
195.222.104.219 255.255.255.255 127.0.0.1 127.0.0.1 20
195.222.104.255 255.255.255.255 195.222.104.219 195.222.104.219 20
224.0.0.0 240.0.0.0 192.168.0.1 192.168.0.1 30
224.0.0.0 240.0.0.0 195.222.104.219 195.222.104.219 20
255.255.255.255 255.255.255.255 192.168.0.1 192.168.0.1 1
255.255.255.255 255.255.255.255 195.222.104.219 195.222.104.219 1
Default Gateway: 195.222.104.193
================================================== =========================
Persistent Routes:
None -
Created Network and Internet Sharing Problems
Hello,
I created network with WEP password. I proceeded to turn on internet sharing.
All works great until the iMac goes to sleep.
Once it comes back on the network I created is missing and I have create it all over again.
The internet connection is through ethernet staring into the iMac.
Is there a way to get the iMac to stop forgetting the created network and leave the internet connection on? Even when it's sleeping.
Thanks in advance.Hi there,
Is there a reason why you chose WEP? I ask because WEP is an encryption technology that has been cracked so if possible I"d suggest you use WPA or WPA2 encryption instead. Am I correct to assume you don't have a router and all the other computers connect to the internet through the imac? If you don't have a router I'd suggest you buy one, they are not much money and provide excellent protecton from the internet. A router will protect all the computers on your network behind its firewall and would no longer have to connect through the imac.
A couple of things to check:
Go to System Preferences>Network and highlight 'Wireless' on the left side. (Also, if you don't use Bluetooth or any other type of networking listed there delete them from the list leaving only Ethernet and Airport) Uncheck 'ask to join new networks'.
Then click on 'Advanced..' and under the Airport tab make sure only your network is listed in the 'Prefered Networks' window. Under that window check 'remember any network this computer has joined' and uncheck 'disconnect from wireless networks when logging out'.
That's the way I've got my computer set up and I've never lost a connection.
Message was edited by: pogster
Maybe you are looking for
-
Creation of virtual keyfigure.
Hello All, Please lookinto the below requirement... my requirement is One keyfigure available in cube and one more key figure available in multiprovider. we need to calcule the total vale. For example total value menas in our case : SR_Co/SR_coff. we
-
I need to delete photos from iPhoto! please help!!!
-
Hi All, I have a requirement, If user passes a date "1-JAN-2012" i need to pick the data between first half of the month i.e 01-JAN-2012 to 15-JAN-2012.This same for the dates 1-15. If user passes the date "16-JAN-2012" ineed to pick the date between
-
Urgent: Reports: Skip the first screen
Hi experts, In report program iam calling another program screen. I just want to skip the first screen of the calling program and when i call this program i should directly go into the output screen. Iam using like this. So how should i skip the f
-
Why do I have to have a visa or master card to activate my apple id??
This is stupid nd a rip off. I don't have a visa or a master card to activate my apple id. I mean not everybody has one or don't want their accounts hacked nd their bills going up. Why do we have to do this, just to activate an account. LikeI said, i