Set up new sales org/plant but without using Finance - is this possible?

Hi,
I was asked if the following is possible.
Set up a new sales org/plant but without using Finance.
It should be possible to create purchase order with goods in
and sales orders with delivery and goods issue.
But the invoice will be done in an external system.
So, all what has to do with finance will be done in an external system
also the goods in/goods out values.
So the stock and stock movements should be visible in SAP, but the values for this stock
will be posted in the external system manually.
So the question is: Is it possible to set up a new sales org/plant
but without using Finance?
Thanks
Regarfds
Dieter

Hi,
really nobody has a hint?
Most important: the stock movements should only consider only quantity no values?
Isn´t there any way to say for a certain material it only consider quantities but no values?
Regards
Dieter

Similar Messages

Free Goods determination -acess sequence sales org/ plant/material

Hi
I am trying to determine the free goods by choosing the key combination as Sales org/plant/material.
The system is not determineing the free qty ,instead when i maintain the condition record with customer/Material key combination ,then the system is determineing the free qty.
I also tried to put acess Sequence Sales org/plant/material above the Acess sequence customer/Material,but still the system not detrmineing the free qty in the order.
can any one pl gide me how to solve this issue.
regards
shashi

Hi
Go to the access sequence where Sales org/Plant/Material are maintained as condition table.
Now select the condition table and then click the node "Fields" on the left hand side of the screen.
It may give a warning message that "Fields are not yet generated". Just ignore this and Enter once again.
Do this until it takes you to a screen where you can see fields like KOMK-VKORG, KOMK-WERKS and KOMP-MATNR
Now create the condition records and check in transaction by creating sales order. It shoudl work.
Hope this helps.
You can reward if it helps you

Extending material master for different sales org/plant combination

hi ,
1 ) a material can be sold from one plant by many sales organisations. so we map this scenario in enterprise structure by the config step "assign sales org--dist channel--
plant ". (let's say sales org A and B selling from plant 1 and also sales org A selling from plant 2)
when we have defined the above config step, then why we need to have material master extended for different combination of sales org and plant as in stpe 1 ?. we can just create one material master with one plant and sales org combination and based on config as in step one, we can sell material from any sales org from a plant ?
2) we can extend material master for any combination of sales org/plant .....is it also possible to extend material master to different storage locations !
regds
pamela
Edited by: Pamela79 on Feb 15, 2011 11:02 AM

There are several reasons why you should extend the materails to different sales organizations and plants.
a. The materials are normally valuated at the plant level. So, you can have different valuations at different plants.
b. You can have different quantity stored in different plants. How do you know which plant has what quantity.
c. You can have materail not to be sold from one plant, but you can have the same materail sold from the other, how do you block it? at the plant and materail combination, you can do it.
d. For different sales organizations, you may want the cost and the price to be posted to different GL accounts. You can control it at sales org level of the materail.
e. You may just want the material to be purchased but not sold, then you may not even create a sales org view for the material. But say, in future you will like to only purchase a materail from a plant and consume it for some other purpose but not sales (which u did previously), then you can block it at sales org and dbr level.
So, these are a few reasons. But there could be many. You can have a look at the fields in the material master at sales org level and plant level and you can find it for yourself howmany parameters are there to control...
Hope this helps...
Regards,
Mukund S

Creating New Sales ORG

Hi
We created a new Sales ORG in R/3.
TO replicte the changes in CRM I replicated the new Sales org in PPOMA_CRM and linked it to the R/3 Sales ORG.
But even then when we are creatign an Oppurtunity we are not able to see the newly created Sales ORG.
DO I need to do other steps so that we can seethe Sales org in the Activities transaction.

Hello Zack,
The problem may be due to following causes:
1. The structure of the organization is missing in the CRM system.
2. The CRM organizational unit is not assigned to the R/3 organizational unit.
3. The division is not active in the CRM system, however, the R/3 substitute division is not maintained.
4. The program buffer in the CRM system is outdated.
So what you could do was the following -
1. You can use Transaction PPOMA_CRM to check the structure of your organization.To create the structure, read the documentation in the IMG ('Customer Relationship Management -> Master Data -> Organizational Management -> Organizational plan'). As of CRM Release 2.0C, you can generate the data from the R/3 system automatically. For this, use Transaction CRMC_R3_ORG_GENERATE.
2.In Transaction PPOM_CRM, each R/3 organizational unit has to be assigned to a CRM organizational unit.This assignment occurs in Transaction PPOMA_CRM.You find the corresponding fields in the 'Type' tab. You can maintain distribution channel and division on the 'Attributes' tab.
3. If you do not want to use a division in the CRM system, you have to make the corresponding Customizing in the IMG ('Customer Relationship Management -> Master Data -> Organizational Management').
4. The organizational structure is buffered to increase the performance.Up to CRM Release 2.0B, this buffer is only updated once every day.
If you change the organizational structure and transfer the master data based on the changes from the R/3 system on the same day, error messages may occur. Run the attached report ZCRM_ORGMAN_VTAREA_GET to resetup the buffer.
Hope this helps.
Thanks
Sumit

Copying New Sales Orgs To Sold To Parties

We are planning to create a new sales org. to replace an existing Sales Org.
The existing Sales Org stay and will be run in parallel with the new sales org. until phased out.
All Sold-To Parties under the existing Sales Org will also need the new Sales Org assigned to them.
Is there a way of giving these Sold-To Parties the new Sales Org i.e. through a program?
Any advice appreciated.
Many thanks
David

Hi,
CRM is used with R/3 as the back end system.
The Sales Org assignment however is driven from CRM.
I find it hard to believe that there is no way of creating the sales org assignment in multiple Sold-To Parties because this kind of thing must happen many times with SAP implementations where an old sales org in an old company code is superceeded with a new one.
One action suggested to be was to change the Sales Org Number in PPOMA_CRM against the existing Sales Org and then do a CRMM_BUPA_SEND for the Sales Orgs in this Org structure, then change it back to the old number, but this sounds a tad dodgy.
David
null

How to extend CMIR to new sales org's and distribution channels

Hello,
i need to extend existing CMIR's to new sales org's and disttibutiion channel combo's, i have about 24000 records that need to be extended to around 300 new sales org's and disttibutiion channel combo's.
is there a way to do this without having to do a lsmw recording.
Thanks,
Zair

hi,
please follow LSMW:
Recording VD51                 VD
        VD52 Maintain Cust-Mat.Info w/Select.Scrn
            RV10A001 1000
                BDC_CURSOR                     KUNNR
                BDC_OKCODE                     =ONLI
                KUNNR                          2000004531
                VKORG                          GB20
                VTWEG                          99
            RV10A001 1000
                BDC_CURSOR                     KUNNR
                BDC_OKCODE                     /00
                KUNNR                          2000004531
                VKORG                          GB20
                VTWEG                          99
            RV10A001 1000
                BDC_CURSOR                     KUNNR
                BDC_OKCODE                     =ONLI
                KUNNR                          2000004531
                VKORG                          GB20
                VTWEG                          99
            SAPMV10A 0200
                BDC_CURSOR                     MV10A-MATNR(01)
                BDC_OKCODE                     =SICH
hope this clears your issue
balajia

Extending exisiting customers to New Sales org in ECC

Hi All,
We have existing sales org:2000 with so many customers created. Now as a business requirement we would like to create same customers with same customer numbers from Sales org :2000 to new sales org eg: 1000.
We tried XD99 but it can be done with reference to only one customer. But in our case we have different customers for Sales org 2000 and we would like extended one to one with same customer number to sales org 1000.
Please note : We don't want to use LSMW.
Please let me know how this can be achieved.
Thanks in advance for your help.
Regards,
Veerendra

We tried XD99 but it can be done with reference to only one customer
I dont know how you were telling that through XD99, you can change only for one customer which is not quite true. You can mass update there also. In fact, once you execute XD99, system by default, will have a green tick on "Data Records to be Changed". You have to select the next tab "Data Records to be created" and maintain the required sales area to which those customers needs to be extended. You can also achieve this via MASS.
thanks
G. Lakshmipathi

What is the impact on MM if assign new sales org to sales order type?

hi expert!
need to ask you guys, what is the setting need to be done if on sales side they want to assign a new sales org,distribution channel and division to sales order type for drop shipment process? Do we only need to make sure that purchase org has been assigned to company code of the sales area?
Thanks.

Sales Organisation has to be assigned to a company code & Sales view of the material has to extended to this new sales organisation using T code MM01.
Regards
Bhavesh Mistry

I just got my daughter a new macbook pro. She currently shares my wires apple id for iTunes on her iTouch. I need to set up an email account for her. Is there any way to set up a new iCloud email account but still use my wires apple id for iTunes?

I just got my daughter a new macbook pro. She currently shares my wifes apple id for iTunes on her iTouch. I need to set up an email account for her. Is there any way to set up a new iCloud email account but still use my wifes apple id for iTunes?

No it's not stealing. They have an allowance that you can share with so many computers/devices. You'll have to authorize her computer to play/use anything bought on your acct. You can do this under the Store menu at top when iTunes is open on her computer.
As far as getting it all on her computer....I think but I am not sure (because I don't use the feature) but I think if you turn on Home Sharing in iTunes it may copy the music to her computer. I don't know maybe it just streams it. If nothing else you can sign into your acct on her computer and download it all to her computer from the cloud. Not sure exactly how to go about that, I haven't had to do that yet. I wonder if once you authorize her computer and then set it up for automatic downloads (under Edit>Preferences>Store) if everything would download. Sorry I'm not much help on that.

Can you set up a new I Tunes account, but still use the same email address, as having problems with it keep telling me it has been disabled, no matter what I do to chnage the passwords, I haven't used the account since 2010?

can you set up a new I Tunes account, but still use the same email address, as having problems with it keep telling me it has been disabled, no matter what I do to change the passwords, I haven't used the account since 2010?

Hi eddinchina,
You should have no need to use the Old Sync account.
As long as device or devices are Firefox 29 or later (They should all be Firefox 30 now) you should use the New Sync.
You may use the same email address with both accounts.

HT1414 Can i download new updates for iOS iPhone4 without using itunes?

Can i download new updates for iOS iPhone4 without using itunes?

Thank you
I did try to do that, but it needs wifi connection to download the software i dont have wifi connection and one more thing, I dont have in front of me right now my personal computer im using another persons computer what should i do just to download the software update now and then when i got home i can download or transfer it on my personal computer when i get back.

Create a new row in a table without using add new row button

I want to add a new row to the table without using the add new row button of the table. I'm not able to display default row in the table. Though if click on apply the record appears after saving in the database. Any thoughts how to implement this functionality.

Here is what you have to do.
1) You have to handle this in processRequest()
2) In the AM code , u need to check if there is already a row exisit or vo is blank
if (vo.getFetchedRowCount() == 0)
// first time
vo.setMaxFetchSize(0); // THIS IS REQUIRED.
Row row = vo.createRow();
vo.insertRow(row);
row.setNewRowState(Row.STATUS_INITIALIZED);
else
//If already rows are there then you suppose to insert in the end
// i assume you would have execute your vo
YourVORowImpl row= (YourVORowImpl)vo.getRowAtRangeIndex(0);
vo2.insertRowAtRangeIndex();
It should work.

Add a new record in database table without using table maintance generator

Hi Expart ,
Plz. tell me how to add new record in database table without using table maintance ganerator ....give me one ex.
Regards
Bhabani

Hi,
The other way to safely handle the modification of tables is through is by programs that can be done with SE38 or SE80.
To insert into database table we use INSERT statement :
1. To insert a single line into a database table, use the following:
INSERT INTO <target> VALUES <wa>.
INSERT <target> FROM <wa>.
2. To insert a several lines into a database table, use the following:
INSERT <target> FROM TABLE <itaba>.
Or even we can use MODIFY statementas this single statement is used to insert as well as update the records of database table.
MODIFY <target> FROM <wa>.
or MODIFY <target> FROM TABLE <itab>.
thanx.
Edited by: Dhanashri Pawar on Sep 10, 2008 12:25 PM
Edited by: Dhanashri Pawar on Sep 10, 2008 12:30 PM

HT201210 hi , this iphone is change new one to me, but i use only 1 day it broken again ! i can not restored

hi , this iphone is change new one to me, but i use only 1 day it broken again ! i can not restored
Model A1429
Imei : 013717001187438
Sirim No. RAXF/63B/1012/S(12-1823)
Notis - An unknown error occurred (14)

It seems the iPhone before the update was not officially unlocked from the carrier it is locked to. Which would mean it had been unlocked to use on your carriers sim by jailbreaking(hacking) or by using third party hardware.

I want to copy my iTunes library onto my iPhone without iCloud. Is this possible? In past you could drop & drag upon syncing....now only download via iCloud?

i want to copy my iTunes library onto my iPhone without iCloud. Is this possible? In past you could drop & drag upon syncing....now only download via iCloud?

So what is stopping you?
Do you have manually manage video and music set up?

Set up new sales org/plant but without using Finance - is this possible?

Similar Messages

Maybe you are looking for