Set up out of the box

I am having problems right out of the box, I start the setup it works until I go to network wizard, then I get a message can not access the internet, even though I am on the internet.
I have tried the online help site, and still cannot run this program
Am I missing something or should this be easier to install?
Does anyone know a better wireless router than this?
Thanks...
(Edited post for guideline compliance. Thanks!)
Message Edited by JOHNDOE_06 on 03-09-2008 10:35 AM

Let me know the Model number of the Linksys Device .... Also tell me other Network Details ...

Similar Messages

Brand New Ipod touch 4th gen right earphone jack not working out of the box. Bought at Wal-Mart yesterday. Are we missing something in the set up or should we return it?

We just purchased an ipod touch 4th gen 8 gb from Wal Mart. OUt of the box the right headphone is not working. Tried numerous pairs of headphones..tried the mono settings and nothing is working. Is there a setting we are missing or should we just return it?

If the headphone plug is fully inserted, I would return the iPod for a replacement

Move document set [out of the box]

is there a out of the box solution to move document set between libraries?
I have created site collection using Document Center site template for SP2013 Enterprise.
I was really surprised that Doc Set has no functionality to move it from one library to another?
Option needs to be available to end user in like 3-4 steps from document set ...
Any tips?

Hi
TUlee ,
For moving document set between libraries, you can use the Site Content and Structure in the site settings. Using the Site Content and Structure function we can manage both the content and structure
of your SharePoint site collection. To access the Site Content and Structure page, you must have a minimum of Contribute permissions.
For more information, you can refer to the article:
http://community.bamboosolutions.com/blogs/sharepoint-2013/archive/2013/07/29/how-to-use-the-site-content-and-structure-manager-in-sharepoint-2013.aspx
http://office.microsoft.com/en-001/sharepoint-server-help/work-with-site-content-and-structure-HA010131723.aspx
Best Regards,
Eric
Eric Tao
TechNet Community Support

Brand new IPad 3 out of the box - set up problem with Apple ID

Brand new iPad 3 out of the box - set up problem. It says my Apple ID (email address) is already being used. I reset the password successfully but still says I need another Apple ID. Why won't the ID recornize me?

Open current iTunes on your computer. Connect iPhone to the computer with the Lightning USB Cable. Hold both the Home and Power buttons for about 20 seconds until iTunes recognizes the iPhone in Recovery Mode. Click the Restore button of iTunes. If still problem, make Genius reservation or set up Sevice and take or send to Apple for resolution under Warranty.

How do I sync my iPad to iTunes after setting it up independently out of the box?

I bought my iPad a couple of months ago and set it up straight out of the box as I didnt have my laptop there. It is synced to back up over Lion and all that Jazz but now I want to sync it to my iTunes so that I can put big files on it easily (movies etc). However, it wants me to completely restore it and resync and set up through iTunes, I will therefore lose everything...
What do I do?

Read this blog and see if this isn't something that you might want to try. I've never had to do this, but I've referred a few users to this - who were having the same issue as you - and it worked for them.
Take a look.
http://itsmichaelw.com/tutorials/this-computer-has-been-previously-synced-with-a n-iphone-or-another-ios-device/

Can I charge my ipod 5th generation right out of the box,without setting up account

Can I charge my ipod 5th generation right out of the box,without setting up the account

Why do you want to do that.
All new iPod came fully charged. (at least more than 80%)

I bought iPod Touch 14.5 gb 2.21 (5H11a) a few years ago. Due to unexpected life issues, I was unable to take it out of the box, until May 2013. I set it up as much as I could. However, it won't upgrade. I keep getting -1 error. Suggestions please...

I bought iPod Touch 14.5 gb 2.21 (5H11a) a few years ago. Due to unexpected life issues, I was unable to take it out of the box, until May 2013. I set it up as much as I could. However, it won't upgrade. I keep getting -1 error. Suggestions please...

Error -1
Attempt to restore your iOS device two more times. If the issue is still unresolved, the device may need service.
From:
http://support.apple.com/kb/TS3694#error1
The "device may need service" means a hardware problem. In that case make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Out of the box Media Web Part in VideoPlayerPage.aspx is not video loading dynamically after changing Media Setting

Hi,
We are on SharePoint 2013 and we are using the default SharePoint 2013 Asset Library to upload videos. We are using purely out of the box sharepoint 2013 with no customization at all.
When we click on any videos, It will lead us to the videoPlayerPage.aspx and plays the video that we click on which is what we wanted. But we do not want the player to play videos on load thus we did the following action
Edit Page
Click on the Media Web Part checkbox and the Media Tab in the Ribbon appears
Uncheck "Start Media Automatically"
Stop Editing
After doing this, no matter whatever video was click, it will only load the video which we perform the action on.
How can we undo this change or revert back as we need the videoplayerpage.aspx to load video based on what we click in Asset Library?
Thank you.
Best Regards
Alex Lee

I just did this myself and it did the same to me when editing it via the page editing.
If you open in SharePoint Designer, you can browse to the page (/Forms/Video/VideoPlayerPage.aspx) and change the property in the HTML. This will keep the web part properties from getting overwritten in the DB. You will then be able to open each
video without it playing automatically.
NOTE: You need to delete the asset library, then add it back in order to apply this.
Chris Givens CEO, Architecting Connected Systems
Blog Twitter

Where is the SP 2010 out of the box workflow status value stored?

I created an out of the box Approval - SharePoint 2010 workflow (TEST1) on a custom list. When I created this out of the box workflow, I specified a name for the task (TEST1 Tasks) and history (TEST1 History) list.
The workflow is creating tasks, sending emails, and the task emails lead me to a screen where I can approve or reject the requests.
However, TEST1 - the list that contains the items created - doesn't have a status column. The TEST1 Tasks has a status column. But I would prefer the people working with the workflow just look at TEST1 and not the Tasks or History lists.
What is the preferred way to create one of these list workflows so that the admins only have to look at the specific tasks that have been submitted and they can see which have been approved or not?
Thank you

Thank you for your reply. Initially, I didn't have content approval turned on, had workflow approval turned on, but didn't have a status column. I also had an error in the history list that the status could not be created.
When I turned on the content approval, then I got a status column, but now my list has a warning across the top telling the user that their request won't be public until approved.
I don't really WANT a document approval workflow. But I don't see how to set up what I do want.
What I need is a simple custom list - a few lookup columns, the rest static data columns, that describe an action that is being requested. That request (ala the list item) is what needs to be approved or rejected. There is no publishing needed in this workflow.
The approval workflow was the closest I could see for setting up such a simple request workflow.

IPod Nano 7th Generation - Bad out of the box?

I just purchased the iPod Nano 7th generation today and came home to sync it with iTunes. iTunes recognizes the device for a second then I receive a "Disk was not ejected properly. If possible, always eject a disk before unplugging it or turning it off." message. I can see the iPod in iTunes for a second then it disappears. As I keep it plugged in it will recognize, disappear, reapear then disappear again.
I purchased an iPod Touch 5th generation today and that is working just fine (as well as synching my other iDevices). Is this nano bad out of the box?

Same thing happened to me. It did download the playlists I wanted, but the next time I plugged it in it acted as though it was being plugged in for the very first time, (regsitration and set up etc.)
But the really bad news is the BATTERY LIFE. maybe get one hour of play time before it drains to zero.
Anyone else have this issue?

After the in place upgrade from SharePoint server 2007 to 2010, the out of the box approval workflow does not prompt for additional information after check in of a major version.

I think it has to do with the interaction between Word, InfoPath, IIS, and /or SharePoint, but I cannot put my finger on it. Maybe client integration or authentication settings? I have looked at it in wireshark
and have not seen anything glaring.
Steps to reproduce the (working) behavior:
Set up a document library in SharePoint 2010.
Under versioning settings, make the following changes:
Set Require Content Approval for submitted Items to Yes
Select Create Major and Minor (draft) versions
Set require checkout to Yes
Create an out of the box “approval” workflow with the following settings:
Start this workflow to approve publishing a major version of an item.
I then create a new document. Save it. check it in. it is now version 0.1.
I then open it again. check it out. Make a change. Close and save it.
Check it in.
Publish major version:
At this point a screen is presented to me to enter workflow parameters. This screen comes up in Enterprise 2013 and MOSS 2007, but not the migrated version of 2010:
This is what I need help with. It should come up in 2010. To fix it in 2013, I had to change the IIS bindings to only have 1 entry for a port. I did this for 2010 and it did not work.
Any help or ideas is very appreciated. Thanks very much in advance.

Hi Chris,
According to your description, my understanding is that the approval workflow cannot work when the workflow was set to start to approve publishing a major version of an item after upgrading to SharePoint 2010.
I recommend to check the approval workflow in Workflow settings of the corresponding library to see if the Start this workflow to approve publishing a major version of an item is checked.
For test, I recommend to create a new OOB approval workflow and set it to start to approve publishing a major version of an item in the same library to see if the workflow can work.
Thanks
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

Malware on New Helix (out of the box) / Need Help Accessing Recovery Partition

Hi,
I'm working on a problem for my folks. My dad got my mom a brand spanking new Helix (not exactly a cheap laptop).
It came with two pieces of malware:
1. Windows 8
2. AstroMenda
Since I can't do anything about #1 and #2 is a serious PITA and the machine is new out of the box (really), I thought I'd just restore the machine from the recovery partition.
However, I cannot seem to get the machine to boot to recovery mode.
Enter doesn't seem to do anything (that is the only keystroke suggested by the splash screen).
F12 gets me a boot menu but I don't see any recovery options. Selecting the Windows Boot Manager or the Hard Drive itself results in Windows 8 booting.
F1 gets me the BIOS. Though I imagine I might be able to set the recovery partition (which #?) to the #1 boot option, I absolutely should not have to do that.
Shift doesn't do anything (suggested elsewhere on these forums).
F2 doesn't do anything.
F11 doesn't do anything.
Esc doesn't do anything.
My older lenovo T61p had the ThinkVantage. I always thought that was pretty goofy but now I'm wishing I had a ThinkVantage.
BTW, Lenovo Support was USELESS. They told me to return the machine and transferred me to returns but since my folks were on vacation when it arrived, we are outside the 30 day window, returns wouldn't do an exchange. They opened a case with Customer Advocacy (never heard of that) but told me I wouldn't hear anything for 3-5 business days and there is no number, website, or email you can call to check your "Customer Advocacy" claim. That sounds a lot like GFY.

Hello.
Open up the Charms Bar - Settings - Click the Power Icon - Hold either Shift button down and press Restart. This will open up the Advanced Startup menu.
Cheers!
ThinkPad W540 (20BG) - i7-4800MQ/24GB // ThinkPad T440s (20AQ) - i7-4600U/12GB
ThinkPad T440p (20AW) - i7-4800MQ/16GB // ThinkPad Helix (3698-6EU) - i5-3337U/4GB
ThinkPad W520 (4282-W4Q) - i7-2720QM/32GB // ThinkPad T400 (2767-W1C) - P9500/8GB
ThinkPad T61 (7665-CTO) - T7700/4GB // ThinkPad T60p (8741-C2G) - T7400/4GB

Out of the box behavior of the Pagination control

Why does the Pagination invoke the PageFactory callback upon page count change? And when it does invoke it, why is it with currentPageIndex=0? Should there be an API to remove this listener if this is undesirable behavior? If we know we may need to alter the Page Count after construction of the Pagination control, would it be best to remove the old one, and construct a new one for display at that point since the current implementation seems to behave inconsistently when one wants to alter the Page Count post-construction and/or callback configuration.
Please consider the following scenario:
The user is viewing a TableView of items. Below the TableView is a Paginator whose PageFactory callback fetches rows from a database and calls TableView.setItems(<results>). There are 3 pages and the user is on the 3rd page. Only 5 rows remain out of a possible page size of 20. The user decides to delete the 5 remaining rows on page 3 from the table/database. Now it would seem natural at this point to conclude that page 3 no longer exists and we would want to the user to return to page 2. If we simply call paginator.setCurrentPageIndex(currentIndex - 1) then we will correctly transition the user to Page 2, however Page 3 will remain displayed in the Pagination control and if the user browses back to that page, he is met with the "There is no content to display" label. So it would seem natural that we could presume this happening and instead call paginator.setPageCount(2), then paginator.setCurrentPageIndex(currentIndex - 1). That way the Pagination control reflects an accurate number of pages. Unfortunately, this results in TWO callbacks to the PageFactory method, one at currentPageIndex=0 and another at the correct index. Sometimes the widget that is constructed in the PageFactory callback (TableView) doesn't get displayed properly (disclaimer: speculation ahead) probably due to some asynchronous nature of the two competing callbacks (?).
I'm struggling to get a handle on this control. So far, my experience with TableView has been pretty good. I love the features you get with this Pagination control out of the box, but some of the choices that were made with regards with what APIs to expose confuse me. The frustrating thing about callbacks is that sometimes you can get caught in this callback hell where there are all sorts of callbacks being invoked and you don't really know why. Often times, the Javadoc does not indicate that there is a default listener being applied to certain property that may invoke one of these callback. I don't mean to sound like a rant. Overall my experience with JavaFX 8 has been very positive so far. I can usually always find a workaround if a come across a weird issue with an out of the box control. Worst comes to worst, I'll write my own Pagination control.
Thanks for your time.

For anyone else that may come across this post. I was able to find a workaround by simply using a field, boolean pageCountReset, and then bounding all of the logic in my page factory call back with a condition checking for this boolean value i.e. if (!pageCountReset) // continue, else // noop. Then, if I need to reset the page count, I set my boolean to true so that the page factory callback results in a noop. Because the pagination control under the hood will make currentPageIndex=0 (as I talked about above) if the page count is reset, I then have to be very explicit and either call my page factory callback manually to refresh the current page if it still valid, or I call pagination.setCurrentPageIndex(<new index>) so that the page factory callback will be invoked and pageCountReset will be false at this point, so I can successfully transition pages.

Out of the Box alerts and messages. Necessary?

Hi,
I have installed Grid Control and I am monitoring a couple of Hosts and DB's and well, before I even did that I noticed that Grid had a whole bunch of Critical and warning alerts along with Policy Vioalations. Now I assume these are out of the box alerts and messages, cause some of them seems pretty dumb to me. I know we can change them to change the values but I just wanted to make sure if I should really worry about these or not? Are they really serious. Some of them don't make any sense to me and I have been trying to look online at places where I can find out what they mean exactly and how to correct them. Does anyone know how to. These messages are just annoying and I would like to log in to Grid and see no alerts or violations. Here are some examples of what I am talking about. Any advice or help is much appreciated :)
Examples Alerts:
-51.55% of all processes are in zombie state, crossed warning (35) or critical (50) thresho...
-Number of Active Agents exceeded the critical threshold (1). Current value: 0
**This one seems dumb to me since I only have one agent on the server and the threshold is set to 1!!!!
-Metrics "Current Open Cursors Count" is at 1673
-Target is in broken state...
**This one I would really like to figure out what it means. It is listed under the errors tab.
Example Policy Violations:
-Critical Patch Advisories for Oracle Homes
-Listener Direct Administration
-Use of Hostname in Listener.ora
-Oracle Home Executable Files Owner
Thanks

-Critical Patch Advisories for Oracle Homes
Nice but pretty obvious - only need if you have a security policy at your company-Listener Direct Administration
Dont believe in that one ...-Use of Hostname in Listener.ora
Same with this ..-Oracle Home Executable Files Owner
Should be fixed .. a valid problem.

Out of the box iphone dfu restore

Hello guys,
Soon ill receive my fist iphone ever, its gonna be 4s, so i wanted to ask for a little bit of help from pro users
I saw this video http://www.youtube.com/watch?v=tdwz1w47HqE
And as i dont have an iphone 4 to compare it to 4s for any speed related issues shown in this video.
I want to make and DFU restore or just basic restore just to be sure everything works as it should, but i dont know which one is better.I suppose it should be DFU,
but to be sure, i wanted to ask you guys for recommendation.
Thats it for 1st question, another one would be if i should do that straight out of the box without even turning on device, or should i turn in on,activate it set up some things and after that do DFU restore or basic restore.
Im looking forward to any helpful comments and i want to apologize for my bad english
With best regards
Radim.

Well it's completely up to you, but I suggest that you activate your phone out of the box and then DFU restore. But honestly, iphone 4S should be clean installed out of the box. Apple doesn't put junks or trials into their OS out of the box. Only Microsoft vendors does that (HP, Toshiba, Dell, Sony, etc)

Set up out of the box

Similar Messages

Maybe you are looking for