Set up scanner and using scanner

I am trying to find out how to set up to scan documents and basic use of scanner

Look here:
http://support.apple.com/kb/ht4505

Similar Messages

  • Hi! I am using Snow Leopard 10.6.8, iTunes 10.6.3 on my Intel i3 iMac and should I purchase the latest iPad, would I be able to set up, synch and use it without iCloud? Regards Neil

    Hi! I am using Snow Leopard 10.6.8, iTunes 10.6.3 on my Intel i3 iMac and should I purchase the latest iPad, would I be able to set up, synch and use it without iCloud? Also, would iWork files be interchangeable between the two bevices? And...could information from the Mac be transferred into iBooksAuthor? Regards Neil

    You may need to update iTunes to iTunes 11 but you can do that running Snow Leopard 10.6.8. I would recommend running iTunes 11 anyway. It is a bit different in the user interface, but it works the same that it did in 10.6.3.
    You can transfer iWorks files back and forth without iCloud but you will need to use file sharing with iTunes. However, you will have to purchase the iPad versions of those apps becuse the Mac versions will not work on the iPad if you were thinking about using the Mac apps.
    You can read about file sharing here
    iWork for iOS: About iTunes File Sharing
    Sorry, but I know nothing about iBooks Author.

  • Set PF-STATUS and use SY-UCOMM in an Exit FM

    Hi,
    I am working on an Exit function, and I am trying to read the screen status and then the user's actions, so that I could code for the SY-UCOMM. For some reason, my program is not working. Is it possible to add the PF-STATUS and SY-UCOMM to the Exit function to process the user's actions? Please advise.
    Thanks,
    RT

    Hi Ravikumar,
    I was able to use the parameters in the Exit provided in the Exit FM to process the necessary data. I have other requirements where I would have to code in the Exit FM to detect the user's actions and process them within the Exit to manipulate the tables. I added some code specified in the previous post, but it doesn't seem to get the OK_CODE; therefore, no processing of the data was happening when I tested by clicking on the yellow arrow to exit. I am able to determine the OK_CODE though.
    Would you have any sample code suggestions when using the Exit for SET PF-STATUS and SY-UCOMM?
    Thanks so much.
    RT

  • Best setting for render and use in pc

    hi dear friends
    i have final studio,i dont know why but compressor(software) is not working, i shoot by sony EX-1(xd,tapeless) and edit in fCP. i tested some setting in output to render my sequence and use it in pc. i check avi_dv. dv stream, but i dont like quality in rendered file. uncompress file is ok but as you know size is problem and other software need render or preview to play it back. im looking for a great output setting to render a file and use it in pc or retouch it in premier.
    tnx
    Pooria

    Thanks for the great response and links to much needed info. Very much appreciated.
    I gather from your response that Crystal Reports 2008, developer 12.0 has been overcome by events, at least in the scenario of Net development withing VS 2010....
    Ralph
    Edited by: R3Curler on Sep 16, 2011 2:08 AM

  • Setting camera target and using the pan tool moves everything except target

    Hi,
    I have a JavaScript which sets the camera target using the code below.
    var setTarget = function(strNodeName) {
        for (var intCounter = 0; intCounter !== scene.nodes.count; intCounter++) {
            var node = scene.nodes.getByIndex(intCounter);
            if (node.name.indexOf(strNodeName) === 0) {
                var camera = scene.cameras.getByIndex(0);
                camera.target = node;
    This works great for the rotate and spin tool. But hen I use the pan tool, everything moves except the node that was set as target.
    Why is this happening and how can I prevent this?

    James, thank you very much for the VI, now i understand what you meant by initialising the shift registers. You're right about my text-based programming background, and seeing how you've implemented the case selection really helped. The removal of the mathscript modules does reduce lag quite a lot, too, and now everytihng works exactly as it should. I set the initial servo positions and rawx/rawy values, extended the error line the way you suggested, and added a division by two after the array summation, in order to get an average, rather than a near-double result. 
    I agree with you and 22v10 that slicing the image up into quadrants might have been a better idea to begin with. The 'center band' that is set in the current vi works quite well and i'll stick with it for now, since i won't have much more time to work on this project. 
    I avoided adding tilt for now because i thought it would only complicate things. Now that panning works, i've duplicated the method and adjusted it for tilt. 
    I'm also considering removing the Vision Assistant nodes, since for calibration purposes i need to go into it and create new templates from scratch every time, and this will only get more tedious as i start experimenting with more complex 'targets'. A more viable solution is presented here, where everything is set once the application is launched. 
    Please find attached an updated copy of the VI. It's a bit laggy, i'll continue working on it and updating. 
    James, thank you again for providing a working solution. I'd love to give you credit when the project's finished.
    Attachments:
    image tracking camera centering-update 2, working.vi ‏916 KB

  • I want to set my alarm and use it through my auxiliary?

    can you set the alarm and get it to play through auxiliary?  on blackberry pearl
    Message Edited by Jordanwilson on 08-10-2009 12:21 PM

    Welcme to the cmmunity supprt frums
    As Irwin said, post back the auxillary 
    Nurse-Berry
    Follow NurseBerry08 on Twitter

  • I restored my iPhone, then I set it up and used it without syncing it to my computer. When I plugged it in, it used back-up and now everything I did before I did the back-up is gone. Can I get those pictures back somehow?

    My iPhone was restored. I set it up without syncing it to the computer. I used it. I then plugged it into the computer. It used back-up and made it just like it was before I restored it. Everything I did before I plugged it in is now gone. Is there any way to undo that to get those pictures back?

    when you open the app store scroll down to the bottom it will display the apple id currently in use, change it to your normal apple id email

  • High Contrast themes on Windows 7&8 overwrites css styles on webpage, how do keep the High Contrast themes setting on window and use the stock CCS?

    This was not a problem for me until Windows 8 now makes it so you HAVE to use high contrast theme to be able to change the background on windows explorer. Otherwise you have to accept it always being white. If there is a windows program that allowed me to change the windows colors like you used to be able to then I would not need to use the high contrast.

    Note I have click on the Firefox button (Tools menu) and then click Options
    Select the Content panel then Click the Colors... button.
    I do have checkbox beside "Allow pages to choose their own colors, instead of my selections above" checked.
    BUT Still
    Windows somehow overrides this. This is bugging the hell out of me. How is it what windows has any control over Firefox's controls anyways?

  • If I buy a MacBook Air at Sydney Airport and travel to the USA, will I be able to set it up and use it on the trip (in the plane and the states)??

    And will I be able to connect my iphone to it?

    If you buy an unlocked phone, it will work on any compatible GSM network anywhere in the world. If you buy an unlocked phone in the US, it will not work on LTE networks outside of North America. The warranty is also only valid in the country where the phone was originally sold.

  • How do I get songs from iPod(video) to iTunes(7 and using VISTA).

    How do I get songs from iPod(video) to iTunes(i'm using iTunes7 and Vista).
    I don't have the disc, cause i can't find it. But my computer downloaded the ipod, it just cant find the files?
    i've been looking through the topics for the past hour and none of them helped. Maybe i'm stupid i dont really know, but i've restored my old computer a couple times and i found a post and it helped both times. now i can't find it anymore.
    THIS IS THE ONE I'VE BEEN SEEING AND IT DOESN'T HELP ME ONE BIT:
    Connect your iPod to your computer. If it is set to update automatically you'll get a message that it is linked to a different library and asking if you want to link to this one and replace all your songs etc, press "Cancel". Pressing "Erase and Sync" will irretrievably remove all the songs from your iPod. Your iPod should appear in the iTunes source list from where you can change the update setting to manual and use your iPod without the risk of accidentally erasing it. Also when using most of the utilities listed below your iPod needs to be enabled for disc use, changing to manual update will do this by default. Check the "manually manage music and videos" box in Summary then press the Apply button: Managing content manually on iPod
    Once you are safely connected there are a few things you can do to restore your iTunes from the iPod. If you have any iTunes Music Store purchases the transfer of purchased content from the iPod to authorised computers was introduced with iTunes 7. You'll find details in this article: Copying iTunes Store purchases from your iPod to a computer
    The transfer of content from other sources such as songs imported from CD is designed by default to be one way from iTunes to iPod. However there are a number of third party utilities that you can use to retrieve the music files and playlists from your iPod. You'll find that they have varying degrees of functionality and some will transfer movies, videos, photos, podcasts and games as well. Have a look at the web pages and documentation, this is just a small selection of what's available, they are generally quite straightforward. You can read reviews and comparisons of some of them here:
    Wired News - Rescue Your Stranded Tunes
    Comparison of iPod managers
    TuneJack Windows Only
    iPod2PC Windows Only
    iGadget Windows Only
    iDump Windows Only
    SharePod Windows Only
    iPodRip Mac & Windows
    YamiPod Mac and Windows
    Music Rescue Mac & Windows
    iPodCopy Mac and Windows
    iRepo Mac & Windows (iPhone and iPod Touch compatible)
    iPod Access Mac & Windows (iPhone and iPod Touch compatible)
    There's also a manual method of copying songs from your iPod to a Mac or PC. The procedure is a bit involved and won't recover playlists but if you're interested it's available on page 2 at this link: Copying Content from your iPod to your Computer - The Definitive Guide
    Whichever of these retrieval methods you choose, keep your iPod in manual mode until you have reloaded your iTunes and you are happy with your playlists etc then it will be safe to return it auto-sync. I would also advise that you get yourself an external hard drive and back your stuff up, relying on an iPod as your sole backup is not a good idea and external drives are comparatively inexpensive these days, you can get loads of storage for a reasonable outlay.
    Can someone give me a link, or tell me one that shows step by step.

    Here is a way of doing it, for another take on this, search the forum for posts by Zevoneer.
    Copy from iPod to PC
    It is important not to allow your iPod to sync with an empty library. If it is set to synchronise automatically you will get a message saying your iPod is linked to a different library and asking if you want to sync – it is important to press cancel as syncing with an empty library erases all music from your iPod.
    You can also prevent auto sync by holding down shift & ctrl as you plug in your iPod and keeping the keys held down until the iPod appears in iTunes.
    Once you are connected, you need to set your iPod to manage music manually.
    http://docs.info.apple.com/article.html?artnum=61148
    If you have an iPod with iTunes Store purchases on it, you can use it to copy your purchases to other authorized computers.
    http://docs.info.apple.com/article.html?path=iTunesWin/7.3/en/2586win.html
    However this is not allowed for other music.
    This MacMuse tip tells you how to copy music from your iPod using Windows Explorer, but it is a bit fiddly:
    http://discussions.apple.com/messageview.jspa?messageID=797432
    Otherwise you can use third party software to manage the transfer, there are a variety of programs out there, some free and some that will copy ratings and counts as well as the music files. Here is a selection, check them out and see what suits you.
    http://www.yamipod.com/main/modules/home/
    http://www.floola.com/modules/wiwimod/index.php?page=WiwiHome
    http://www.ipodsoft.com/site/pmwiki.php?n=igadget.Homepage
    http://www.copytrans.net/
    You can find others by Googling: copy iPod to iTunes
    There is a useful background article on copying from your iPod here:
    http://www.ilounge.com/index.php/articles/comments/copying-music-from-ipod-to-co mputer/

  • Exporting from FCP and using Compressor at the same time?

    Is it ok to export from FCP and use compressor at the same time? I am exporting a Self-Contained, Current Setting Quicktime Movie, and using Compressor to compress a similar HDV file to Mpeg2?

    Only in FCP 7.

  • SPM Auto Load Capture and Use.

    Hi,
    I was reading about Oracle SPM feature, but i have questions in mind for automatic feature..
    * if we have set both capture and use parameter true. Oracle will automatically capture Plans, but will it automatically evolve new plans to accepted or it will wait for evolve it manually before using new plan.
    * If it Automatically evolve, when and how will it?
    * If it Automatically, will change old plan's flag accepted to No? or add one more accepted plan
    regards
    Hitesh

    if we have set both capture and use parameter true. Oracle will automatically capture PlansCorrect.
    but will it automatically evolve new plans to accepted or it will wait for evolve it manually before using new plan.For plans manually loaded into a baseline, these should be loaded as accepted.
    If a plan is loaded automatically and no plan already exists, then the first plan will be created as ACCEPTED=YES.
    Otherwise, if the plans are loaded automatically, then they will not be accepted until performance has been verified by the evolution process.
    If it Automatically evolve, when and how will it?If the task is enabled, the SQL Tuning Advisor auto task will deal with the automatic evolution.
    If it Automatically, will change old plan's flag accepted to No? or add one more accepted planThe accepted flag of the previous plan should not be set to NO, there should be multiple accepted plans.
    It might be worth taking a step back and looking at the big picture with automatic baseline capture on.
    - If you have a SQL statement for which there is not an accepted baseline, on parse the optimizer does its usual optimizer business and the generated plan is stored in a baseline as ACCEPTED=YES.
    - If you have a SQL statement for which there is already an accepted baseline, on parse the optimizer does its usual optimizer business.
    - If the plan it comes up with by default matches one of the baselines, great.
    - If the plan doesn't match one of the baselines then it will store the generated plan in the baseline to wait for evolution.
    - The optimizer will then use the outline hints in the baseline to generate the particular plan - to do this it has to match the plan_hash_2 value to the underlying plan id in sys.sqlobj$/sqlobj$data/sqlobj$auxdata.
    - If the optimizer can generate the plan, great.
    - If the optimizer cannot generate the baselined plan, then it will revert to the generated plan and mark the relevant plan as reproduced=NO.
    - What if there are multiple accepted plans? It will attempt to reproduce the plans in order of lowest cost baselined plans first.

  • ARD Client Doesn't Show When Using Scanner and Network Range

    All-
    When I use the Scanner in ARD3 to scan a remote Network Range over the internet, the ARD client that I KNOW EXISTS in that same IP range DOES NOT show up (other ARD clients that I'm not interested in do show up, but not the specific ARD client I need to observe/control).
    If I then call the user at the remote ARD client on the telephone, and have them give me their IP address (using www.whatismyip.com, for example), I can use the Scanner in ARD3 to "find" the ARD client and add it to my All Computers list. Process: change the popup box to read "Network Address" instead of "Network Range" and set the IP address field to the address provided by the user.
    Why doesn't the remote ARD client show up when I scan for it using a Network Range in ARD3? Obviously, I don't want to have to call up each user every time I need to perform maintenance/control a client to get their (dynamic) IP address.
    I could use dynamic DNS, but that's overkill. If I know (from experience) that my ARD clients are in IP ranges X, Y, and Z, then I SHOULD be able to simply scan for them (or so I thought).
    Any help appreceated.

    Updated to ARD3.1 (admin and clients), but that did not solve the issue.
    Let me try to restate the problem:
    The ARD client is out of state/across the country (i.e., different sub-net) using a dynamically assigned IP adddress. I can (for now) connect to that ARD client successfully, and perform all ARD functions (that I've tried so far) becasue I know (for now) that client's IP address (I called and spoke with the user who used www.whatismyip.com to give me their IP address). So what's the problem, you ask?
    Some time in the future, that same ARD client will have a new, dynamically assigned IP address. I'd like to be able to connect to that client without having to call on the telephone and ask the user what IP address they have been assigned now.
    My thinking was that I could make a pretty good guess at their IP address (based on their old IP address, and the way Cable and Telco ISPs allocate/lease IP addresses). For example, if their current dynamic IP address is 999.888.777.45, I could guess that a subsequent dynamically assigned IP address would be in the range 999.888.777.2 to 999.888.777.255. With ARD, I could simply scan that range of network addresses using the Scanner and quickly find the ARD client I want.
    I tried to do just that, and the ARD scanner did not find my client when I scanned the network range that the ARD client was actually in. It showed other ARD clients (that I do not administer, own, or want to hack into), but not the one I do want to observe/control/maintain (and have a legal right to). Somewhat paradoxically, when I used the Scanner to find the same ARD client by specific IP address, there was no problem.
    Why doesn't the ARD Scanner "see" the ARD client when scanning the network range?

  • I have scanned photos using an Epson V500 scanner set to jpeg format using the least compression (highest quality) setting. When I try to import the scanned jpegs into iPhoto I get an error  message saying "The file is an unrecognized format."  But if I

    I have scanned photos using an Epson V500 scanner set to scan using jpeg format at the highest quality (least compression) setting.  When I try to import the scanned jpegs into iPhoto, I get an error message from iPhoto saying "The file is an unrecognized format."  But if I reduce the quality setting on the Epson scanner to just slightly below highest quality, the images import into iPhoto just fine.  Why won't iPhoto accept jpegs scanned at the highest quality setting?  Wondering?

    What scanner format settings dis you use?  Are these color photos? If they are B/W did you scan as grayscale images?  That could be the problem.  
    Are you able to open them with Preview?  If so do a Save As, select full quality and save as a jpeg with a new file name.  See if that file will import and work as intended. 
    OT

  • How can i use an barcode scanner and a keyboard at the same time on Ipad

    HI I am looking to find a way to use a barcode scanner and the on screen key bard at the same time, so far i cant seem to find a way to do it.
    Does any one know how this can be done.
    thanks

    It is possible, I use multiple versions, however Firefox official policy is that you use firefox3.6 or 5 ; not firefox 4 which is not secure and not supported.
    The easiest solution may be to use firefox portable http://portableapps.com/apps/internet/firefox_portable/localization#legacy36 although firefox 3.6 will itself not be supported for much longer.

Maybe you are looking for