Set up Signal Express to log when there is a change in state of the inputs (NI USB-6501 logger)

Hello NI Forum, I have recently purchased digital I/O logger NI USB-6501.  This arrived with Signal Express, which I intend to use as a Lite version.  I just wondered if it was possible to set up Signal Express to only add a log entry when there is a change in state of the inputs?  I have this working on a 0.1sec sample period and can interrogate the logs after recording.  Most of the time nothing will be happenning, I just wondered if there was a way to reduce the ammount of data captured?  Cheers.

Ah that unfortunate, and yes start/stop conditions for loging are part of the Full version of SignalExpress
Here's the comparision: http://www.ni.com/labview/signalexpress/purchasing-options.htm
Sorry about that

Similar Messages

  • How to trigger a event when there in any change in category in the service request

    Hello Experts
                            I need to set Employee responsible dynamically when the exact category is chosen in the service request. i am following a approach to register a function module in the crmv_events so that the event will be called as soon as categorization is changed in service request.I have never configured crmv_events.please guide me its urgent.
    Please tell me if a better approach is available.
    I will award points immediately .Reply as early as possible as its urgent.
    Thanks in advance

    Hi Rashmi,
    I would say, instead of doing it from any event function module, do it from web ui bol layer itself.
    Define get P method of category and set event on the value change. Create that same event from event handler and write the code for getting(use FM) and setting emp responsible in that event using bol programming.
    Please let me know if you need the codes for doing all this.
    It would be great if you can paste the the screen shot of the view you are using in web ui.
    Thanks,
    Bhushan

  • Is there a way to set ebooks up in iTunes so when they go in ibooks they stay in the order of the author and series?

    Is there a way to set ebooks up in iTunes so when they go in ibooks they stay in the order of the author and series?

    Hello Serenity99.   In my rather limited experience with this, I have had much success with just copying and pasting the project from within FCP X.  All of the properties (retiming, themes, effects, music, sound effects etc.) copy over exactly between the two, which is great.  The only thing is that while the transitions and retiming copy over in the one go, you may have to go back and copy and paste any titles seperately as they are placed above the clips (well in my case they have been) but they will copy over nicely and as previously configured.  I have not found this to be a big hassle at all.  I was releaved to find that the process was as easy as it was.  Mind you, I have not has as hiccup free a time with copy and pasting from other applications like iMovie to FCP X.  Although I can select and copy the projects, all the other editing and rejiging has been jumbled and required much reworking.  But if you stick to within FCP X it is easy as pie and works wonderfully.

  • HT204053 I use my sisters iTunes to sync only music onto my phone. I have my own apple ID and have it set up in my settings but when there's an update to be done, my sisters apple ID appears and I can't change it. Any ideas?

    I use my sisters iTunes to sync only music onto my phone. I have my own apple ID and have it set up in my settings but when there's an update to be done, my sisters apple ID appears and I can't change it. Any ideas?

    You may have inadvertently synced an app to your phone that was purchased with her ID.  That would trigger a prompt for her ID password when updating.  If that's the case, you would need to delete it from your phone.

  • Looking for some app which send SMS when there is Sim change in Iphone 4 G. Do we have any such software which is free

    looking for some app which send SMS when there is Sim change in Iphone 4 G. Do we have any such software which is free or even paid will work.

    I thought that is what the big deal was that people did not know until they opened the box and started using the iPhone 5, that it not only worked with one carrier but several carriers.  I did not say it will work with any carrier at one time.  I was trying to find out the reason for this and why people were so surprised that the iPhone 5 had this function and the reason for it.  As stated in my post, is it there so that after your contract is up and you want to go to another carrier you do not have to purchase a new iPhone, you  cna purchase a SIM card that works with your new carrier.
    The Otterbox Defender has a tendency to let too much dirt, dust, etc. in the cracks on the case. At least this has been my expereince.  I was thinking something more along some of the really durable cases at BallisticCaseCo.com
    As far as the iPhone 5 having issues, I have heard that there were more than usual with the first couple of manufactured batches that were shipped.  For example the Map App by Apple, the scratches on the backside of hundreds of iPhones, etc.  I am hoping these will get to be less and less, but with the recent riot at the one plant in China where the iPhone 5 is assembled is supposed to increase the waiting time.

  • My iPad screen went black suddenly and is not coming back on. However i can still hear sounds when there are notifications but nothing comes on the screen. It remains blank. What is the problem? I NEED ASSISTANCE A.S.A.P!!!

    My iPad screen went black suddenly and is not coming back on. However i can still hear sounds when there are notifications but nothing comes on the screen. It remains blank. What is the problem? I NEED ASSISTANCE A.S.A.P!!!

    Try Reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • What does it mean when there is an I tunes symbol on the screen with a charging cable underneath that?

    What does it mean when there is an I tunes symbol on the screen with a charging cable underneath that?

    Turn on the computer. Take the charging cable and connect one end to the bottom of the Touch and the other to a USB on your computer (back of the computer if this is a desktop computer). iTunes should open automatically and will probably give you a message it has detected an iPod in Recovery mode. Follow the onscreen steps from there and Restore it from any backup on the computer.

  • Why do my speakers not play music? I know they work because when I go I change my ringtone all the sounds play. I am not a very happy costumer right now and would like an answer to my problem. Thanks.

    Why do my speakers not play music? I know they work because when I go I change my ringtone all the sounds play. I am not a very happy costumer right now and would like an answer to my problem. Thanks.

    What happens when you play music? Do the hardware volume controls work when using the Music app?

  • How do i set up my iPhone to chime when a new email arrives? right now, the chime only works after I tap the mail icon

    How do I set up my 4S phone to chime when a new email arrives?  Right now, the chime only sounds after I tap the mail icon.  I need an alert to check my mail.  Comcast mail.  Settings for mail set at "fetch new data". Thank you

    Try if this works for you
    1. Tap Settings on Home Screen
    2. Go to Mail, Contacts, Calendars
    3. Tap on Fetch New Data
    4. Turn "Push" to On
    5. Back to Mail, Contacts, Calendars again
    6. Under "Advanced", make sure that it is set to "Push" for all your mail accounts
    Push means the server will literally push the mails to your iPhone whenever there is new mail. Fetch like the word says is where you have to manually update to receive new mail (what you are doing now)

  • When there are several tabs open, why does the search always take place on the 2nd tab (the first tab seems never to change from the home page) despite my selecting a different tab in which to do a google search?

    I have Mozilla Firefox 10.0. When I open it, it correctly opens on the homepage in the first tab. Once I have another, or several, tabs open, no matter which tab is active, any google search I do immediately takes place in tab No 2. It doesn't seem to matter how many times I go to e.g. tab 4 to do a search (because I wish to compare with the webpage open in tab 2), yet it always now does the search in tab 2. This is very irritating. There must be some setting that has gone pear-shaped, but where/which? Any suggestions? Thanks.

    Try the Firefox SafeMode to see how it works there. <br />
    ''A troubleshooting mode, which disables most Add-ons.'' <br />
    ''(If you're not using it, switch to the Default Theme.)''
    * You can open the Firefox 4.0+ SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
    * Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
    ''Don't select anything right now, just use "Continue in SafeMode."''
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
    '''''If it is good in the Firefox SafeMode''''', your problem is probably caused by an extension, and you need to figure out which one. <br />
    http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes
    ''When you figure out what is causing that, please let us know. It might help other user's who have that problem.''

  • Avoid marking files as modified by Git when there are no changes

    Hello,
    I am working on a project using Visual Studio 2013 Ultimate and Enterprise Architect 9.0 (a UML tool). I am using Git for Source Control in Visual Studio.
    I have set up the programs so that I can synchronize code from Enterprise Architect (EA) to Visual Studio (VS) and vice versa using MDG Link for Visual Studio (an Enterprise Architect add-in). I first synchronized all the existing code from VS to EA.
    Now I have the following workflow:
    Create UML models in EA;
    Add necessary attributes and operations to the class models;
    Synchronize models with the code, which will add the added attributes and operations to my source;
    The last step will regenerate all my source code files, but even if there are no changes Git marks the files as modified.
    How can I avoid this behaviour, because now all my files are modified when Enterprise Architect synchronizes the model with the source code.
    I only want Git to mark it as modified when there are actually things added or modified in the file.
    Any help will be appreciated.
    Marcel

    Hi,
    I think it's more VS which detect the file was modified, and by default it mark the file as modified in Git. 
    But normally when you want to commit your work these files are removed because Git detect the files are not really changed.
    Did you try to refresh the pending changes in the team explorer (F5). Perhaps Git recalculate all the differences, and then detect the real changes.
    Regards,
    Yan Grenier
    Merci de bien vouloir "Marquer comme réponse", les réponses qui ont répondues à votre question, et de noter les réponses que vous avez trouvé utiles.

  • Is there a way to access an old account if you cannot remember the password, when I try to change passwork they have the wrong birthday in the system and I can't get past it

    My old computer crashed and I was able to copy my music from my Ipod onto my new computer.  When I upgraded to a new Ipod I was not able to access a lot of my music-I needed to authorize the new computer to play songs bought under the old apple ID.  For the life of me I cannot remember what the password was, and when I try to reset it, the birthday that there to confirm it is me is the wrong date-so I can't go any further.  If I go into an apple store will they be able to help?  I have almost 100 songs that I have bought that I can't get to.
    thanks

    Hey teflonjimmy,
    Thanks for the question. If you have lost track of the Apple ID email address or password, you can use our handy iForgot tool to recover the email address and/or password:
    Apple ID: If you forget your password
    http://support.apple.com/kb/HT5787
    Thanks,
    Matt M.

  • DVD set to wrong region and crashes when I try to change it

    I'm in Region 2. I only watch Region 2 DVDs, I only want to watch Region 2 DVDs. At Christmas, my DVD player was working fine with Region 2 DVDs. Today I tried to load another Region 2 DVD (for the first time since I updated the OS for the App Store, I don't know if that's relevant) and DVDPlayer tells me I'm set to Region 1, do I want to change?
    I have no idea why it thinks its set to Region 1 but yes, I want to change, so I unlock the padlock and select Region 2. DVDPlayer immediately crashes out completely with no changes made. I have tried rebooting, moving the com.apple.dvdplayback.setregion.plist and com.apple.DVDPlayer.plist and all sorts. It still crashes out. I can't find how I'm supposed to know how many region changes I have left, but as far as I'm aware I haven't used any. I get no dialogs warning me of having used any.
    Console reports these errors when DVDPlayer crashes:
    13/01/2011 22:03:45 com.apple.launchd[1] (com.apple.dvdplayback.setregion[35408]) Exited with exit code: 4
    13/01/2011 22:03:45 com.apple.launchd.peruser.502[171] ([0x0-0x30c33c03].com.apple.DVDPlayer[35184]) Exited with exit code: 1
    Does anyone know how I can fix this so I can watch my DVDs again?
    Thanks

    Edit: I have found the DVD I played before Christmas and tried playing that, and that still works. However now that I have a DVD that allows me to keep DVDPlayer open, I have found the Region settings, and it still says that it's Region 1, with 1 Drive change remaining for some reason. The DVD that works is 2+4 PAL UK (Back and forth Region 2 only), as is the DVD that doesn't work.

  • How do I delete a photo when there is not a trash bin at the bottom of the screen

    How do I delete a photo when there is no trash bin on the bottom of the screen?

    If there is no Trash icon for that photo, the photo was most likely copied to your iPhone by syncing with your computer. To delete the photo you need to do another sync.
    1. If you want to remove a complete album, deselect that album in iTunes on your computer. Then when you click on Sync or Apply that album will be removed from your iPhone but it will remain on your computer.
    2. If you want to remove only certain photos from albums you must delete the photo from the album on your computer or move it to a different album or folder.  Then when you click on Sync or Apply the photo(s) will be removed from your iPhone.

  • How to update a custom list when there is a changes in excel sheet uploaded in document library

     
    I have created a document library in which m uploading a excel sheet with values in it and i have created a custom list with same no.of.rows and columns in the excel sheet given the same name of columns. Now i have to make sure that whatever changes i do
    in the excel sheet should automatically gets updated in custom list in sharepoint

    You'll need to create an event receiver for when you add/update a document on the source library (http://msdn.microsoft.com/en-us/library/office/gg749858(v=office.14).aspx)
    Then, with code open the excel file and count the rows. You can use the OpenXmlSDK to do that (http://www.microsoft.com/en-us/download/details.aspx?id=5124)
    Good luck ;)

Maybe you are looking for