Set up table data extracted from R/3 not visible in data target of BW

Hai friends,
         I am currently working on extracting data from R/3 to BW. I read the several docs given in the forum and did the following:
  1) In the LBWE transaction, my extract structure is already active.
  2) In SBIW, i went to the filling of set up tables for QM
  3) I executed the set up table extraction
  4) Then, i checked in RSA3. The extraction was successful.
  5) In BW, i replicated the datasource, and in  the infopackage, i selected in the  
      PROCESSING TAB, "PSA and then into Data targets (Package by Package)
  6) In UPDATE tab, i selected FULL UPDATE
  7) And then i did immediate load.
  8) In RSMO, it showed successful. (It showed the same number of records as in the
      RSA3 of R/3)
          But when i went into the data target (ODS) and checked for its contents, nothing is visible. Why is it so? HAve i skipped any step? Please help.
Regards,
Neha Solanki

Hai,
       U r rite. It is an NW2004 system.This is what is displayed in the status tab in RSMO.
Data successfully updated
Diagnosis
The request has been updated successfully.
InfoSource : 2LIS_05_QE2
Data type : Transaction Data
Source system: QAS678
   And i can find no such button as u said.
Regards,
neha Solanki

Similar Messages

  • NEF files from Nikon d800 not visible in bridge and photoshop cs6- using mac ver.10.8.5. downloaded plugin from site 8.3 but issue unresolved

    NEF files from Nikon d800 not visible in bridge and photoshop cs6- using mac ver.10.8.5. downloaded plugin from site 8.3 but issue unresolved

    You can install and use Camera Raw 8.8 with OSX 10.8  Go to Help > Updates in Photoshop CS6

  • View of set up tables data in se11??????????

    Hi,
    can we view the data in se11 thru set up tables names? if so then how do we find set up tables names, say for example if i am using 2lis_13_VDHDR then how can i view the data apart from RSA3 after filling up of set up tables? is there any chance to view the data thru se11 and with the set up table name? and if so then how do we find set up tables name?

    Hi
    set up table names starts with 'MC' followed by application component '01'/'02' etc and then last digits of the datasource name and then followed by set up..
    we can say the <b>communication structure</b> (R/3 side,you can check it in LBWE also) name followed by 'setup'
    for your example below is the name of setup table
    MC13VD0HDRSETUP
    If you want to check data in set up tables you better look at the transaction NPRT here you can see the table name from which data is picking also
    Hope it helps
    Thanks
    Teja

  • Items downloaded from internet are not visible in finder?

    When an item is downloaded (using google chrome) it is not visible in Finder. This began with OS X Mavericks upgrade.

    Where is your default download folder?
    Browsers specific you can set where to download ex Desktop.
    Finder Preferences>Sidebar>Downloads  ?

  • Setting of "opening web pages from last session"not works when open next time

    In Options, setting to "open windows & tab pages from last time" does not work. I have tries several time but nothing happens. have written to you earlier also , please help

    ''setting to "open windows & tab pages from last time" does not work.''
    That would be very surprising but a change was made to Firefox 4 to always have the choice of going to History ("Alt+S") and choose "Restore previous session".
    With Firefox 5 coming out in a few days (June 21-22) you might try again then, if the solution the developers built in does not work for you. Do you know about pinning tabs ('''app-tabs''') they persist across sessions as a convenience -- if I really want to keep something permanently then I would bookmark such things as a group. Because they can be closed easily.

  • Date stamp from mDV camera not visible on viewer  , nor recorded.

    Though the data code is pressed till the date and time stamp is visible on the camera Display,
    it is not received by final cut pro.
    For some projects they want some time and date stamped , sequences.
    Can anything be done ?

    Date stamp data is not something read by FCP ... try iMovie,
    Alternatively, check the camera's output options, it may be possible to output the data burnt-in on the s-video or some such ... if you have the requisite i/o hardware you could then digitize from that signal path

  • XMP metadata from Flashbuilder why not visible in Adobe Bridge?

    Hi there,
    I'm currently wondering around XMP metadata and swf files.
    A: Flash CS5: works
    When I use the XMP panel in Flash CS5 and export a swf, open Adobe Bridge CS5 and select the file, the XMP data are correctly displayed.
    B: Flash Builder(Flex 4.1): don't work
    When I use Flashbuilder and add my metadata to the compilation, then compile, open Adobe Bridge CS5 and select the file, nothing is included in metadata.
    Procedure based on the following (same problem if metadata are directly set through compiler arguments):
    http://livedocs.adobe.com/flex/3/html/help.html?content=compilers_14.html
    ../src/config/ProductMetaData.xml
    <flex-config>
    <metadata>
        <title>My title</title>
        <description>My description</description>
        <publisher>The publisher</publisher>
        <creator>The creator</creator>
        <language>EN</language>
    </metadata>
    </flex-config>
    compiler argument
    -load-config+=config/ProductMetaData.xml
    As far as understood, on the background the following is added to the swf at compile time:
    <rdf:RDF xmlns:rdf='http://www.w3.org/1999/02/22-rdf-syntax-ns#'>
        <rdf:Description rdf:about='' xmlns:dc='http://purl.org/dc/elements/1.1'>
            <dc:format>application/x-shockwave-flash</dc:format>
            <dc:title>My title</dc:title>
            <dc:description>
                <rdf:Alt>
                    <rdf:li xml:lang='x-default'>My description</rdf:li>
                </rdf:Alt>
            </dc:description>
            <dc:publisher>The publisher</dc:publisher>
            <dc:creator>The creator</dc:creator>
            <dc:language>EN</dc:language>
        </rdf:Description>
    </rdf:RDF>
    I've checked that the medata is correctly added to the swf file using this small software polarswf:
    http://download.cnet.com/Polar-SWF-MetaData/3000-6676_4-10738623.html
    I do not know if it is safe to use it in a produciton context at least in trial mode it allows to check the metadata included in your swf.
    I wonder if this metadata coonot be read by Adobe Bridge because they are at a "lower level" than those put by flash CS5 XMP panel?
    Thank you in advance for your help.
    This is not a blocking situation, but I'm curious to understand what happend.
    Cedric Madelaine (aka maddec)

    I was following this post for a LONG time, since I noticed the same problem.
    This week I was getting in it into myself again and I noticed you use load-config. I used these compiler options :
    contributor name
    Sets metadata in the resulting SWF file. For more information, see Adding metadata to SWF files.
    creator name
    Sets metadata in the resulting SWF file. For more information, see Adding metadata to SWF files.
    date text
    Sets metadata in the resulting SWF file. For more information, see Adding metadata to SWF files.
    But that resulted in this XML string where the dc namespace was missing a / on the end of the URI
    That caused the metadata which was added in flashbuilder was only visible in bridge in the rawXML panel, and not the specific fields
    changing the URI in http://purl.org/dc/elements/1.1/ did the trick ( did this in bridge by exporting the rawXML, changed the / , and imported it )
    <rdf:RDF xmlns:rdf='http://www.w3.org/1999/02/22-rdf-syntax-ns#'>
        <rdf:Description rdf:about='' xmlns:dc='http://purl.org/dc/elements/1.1'>
            <dc:format>application/x-shockwave-flash</dc:format>
        </rdf:Description>
    </rdf:RDF>
    Sadly there was no way I could add this / myself everytime.
    BUT then I discoverd this option :
    raw-metadata XML_string
    Defines the metadata for the resulting SWF file. The value of this option overrides any metadata.* compiler options (such as contributor,creator, date, and description).
    This is an advanced option.
    And you could give the exact RAW XML as you  described
    <rdf:RDF xmlns:rdf='http://www.w3.org/1999/02/22-rdf-syntax-ns#'>
        <rdf:Description rdf:about='' xmlns:dc='http://purl.org/dc/elements/1.1/'>
            <dc:format>application/x-shockwave-flash</dc:format>
            <dc:title>My title</dc:title>
            <dc:description>
                <rdf:Alt>
                    <rdf:li xml:lang='x-default'>My description</rdf:li>
                </rdf:Alt>
            </dc:description>
            <dc:publisher>The publisher</dc:publisher>
            <dc:creator>The creator</dc:creator>
            <dc:language>EN</dc:language>
        </rdf:Description>
    </rdf:RDF>
    to the compiler. This could also be done in Flash with JSFL.
    In the end I wrote an ANT script which injects the exact XMLstring of metadata to Flash and Flex projects by using the raw-metadata parameter in FLEX and JSFL for flash.
    Hope this helps

  • Sh.Cart created from PR - but not visible in SOCO(MaterialsHas MRPview)

    Hi,
    We are in SRM 7.0 Classic scenario - EhP4 - Using ECC-PI-SRM route to transfer docs.
    When a PR is created with materials which has MRP1 view with MRP Type value 'ND - no mrp' .... transfered to central system - Shopping cart is getting created. Issue is : this Shopping cart is not displayed in Assign sources of Supply(SOCO) screen.
    Shopping carts with PR's containing materials without MRP view are displayed in Assign Sources of supply(SOCO) screen.
    We are creating RFx from Assign sources of supply screen by selecting the Shopping carts .
    Pls suggest as how to make the "Shopping carts from PRs having materials with MRP view" available in SOCO.
    Thanks,
    Ashwin.

    This is little work around FM  BBP_PDH_DB_DIRECT_UPDATE By using this FM you can can forcely send them to cockpit. but SAP has to do automatically .
    Create ONE oss message under SRM-EBP-EXR
    It may not happen due to your master data as you expected. let us wait for SAP reply ..
    Question:
    Why has my shopping cart not come to the Sourcing Cockpit ?
    Answer:
    Whether or not a shopping cart/external requirement goes to the Sourcing cockpit depends on the customizing SPRO settings  for Define Product Categories for Sourcing (see attachment).
    Here there are the following options:
    Sourcing Always carried out
    Sourcing Never carried out
    Sourcing carried out for items withour Assd Source of supply
    Aut. creation of Bid Inv for items w/o source of supply
    Aut. Grouping. Sourcing for items withour source
    Aut. Grouping, sourcing is never carried out
    Aut. Grouping, and creation of Bid Inv w/o source
    The technical field to check is : BBP_PDIGP-SOURCE_REL_IND

  • Variables from workbook are not visible in the Planning function

    Hi,
    We're using a workbook with a bunch of queries in it. Every query has a lot of variables declared that are calculated based on two input ready variable that users are required to fill the first time.
    Everything works as expected until the save data function is called, which in turn calls the planning function.
    Here, the user exit variable try to be recalculated again. Unfortunately, this planning function loses track of the two input ready variables that were on the workbook, so the user exit variables have no values.
    Can you please suggest a method so that:
    a) The user exit processing in the planning function "sees" the two input ready variables
    b) The user exit processing is not triggered in the planning function and it's taking the already calculated values
    Let me know if you require further information.
    Best regards,
    George

    Hi,
    the variables in the filter of the query lives in one variable container and the variables of the filter of the planning sequence live in another variable container. They do not know each other. You need to establish a relationship between them. Usually this is done via variable binding for regular variables. For exit variables the variable binding can be done as written above.
    If as in your case you have variables in the filter of the query and you want to use their values in the variable of the planning sequence than you need to store the values somewhere where you can retrieve them in the exit. This can be in a e.g. in shared memory or in the session memory. To do this you need to spend an extra exit variable in the filter of the query. The exit variable reads the real values and stores it somewhere (e.g. shared memory, global parameter of a function group, a class member or something similar). Now as the variable value is stored it can be read in the implemenation of the exit variable in the filter of the planning sequence.
    In total we have 3 variables:
    Variable 1 contains the value which the user keys in and exists in the filter of the query.
    Variable 2 reads variable 1 and stores the value. It needs to be defined in the filter of the query as well.
    Variable 3 reads the stored value and needs to be defined in the filter of the planning sequence.
    Regards Matthias Nutt
    SAP Consulting Switzerland

  • Contacts from xFinity web not visible on iPhone

    It has been well over 2 years now that I asked why my XFinity web contacts cannot be seen on my iPhone. At first I was told if you had over 1000 contacts it would not work but that they were working on a fix. So I deleted a bunch of contacts to get the number below 1000. No fix, still no contacts and Comcast just ignores the issue. My privacy settings are correct allowing access so it is not me...when if ever will Comcast address this?

    On your iPhone, try the following.
    Go to Settings > Mail, Contacts, Calendars.
    Select your MobileMe account.
    Turn Contacts off for over the air syncing. This will erase all contacts from your iPhone with a warning message provided indicating this will happen.
    Wait a minute or two for all contacts to be erased from your iPhone.
    Follow this by turning Contacts back on.

  • One user from AD is not visible in portal user administration

    Hi,
    one of our users defined in Active Directory is unable to log into the portal. We have Kerberos authentication.
    I've checked this user is also not visible in portal user administration. The rest of the users are visible and are able to log in.
    Any ideas what could be the cause?
    Maybe some settings/attributes for this user on the Active Directory side could be the cause?
    Regards,
    Ladislav

    Hi,
       Could you please check and confirm if the user,group path are the same for the
    particular user on AD as that referred to by the portal. If not he would not be on the portal and
      then there would not be kerberos too in place for him.
    Rgds

  • Video from v1 is not visible

    I'm perplexed. i finished my project and burned it to a dvd. everything went well. (by the way it was 5gb). that was about a week and 1/2 ago. i opened up the project file in dvdsp and for some reason the video portion on the v1 track is not visible. the menu plays fine. all the pictures come up fine. the music is fine, and when i simulate it everything works except i can not see the video. any suggestions?
    thank you thank you.
    claudia

    The asset the constitutes the video was imported into DVD SP?
    Was it a movie file or was it a m2v previously encoded file?
    Locate it on your volume and see if it can be opened and played in the QT Pro player.
    Reimport it, and place it on the track . . .

  • Why Set up table in LO Extraction ?

    Hi All,
    In LO Extraction we have filling up of set up tables for doing Init and then delta falls into update table etc then using V3 collective run push it to Delta Queue. Then we extract into BW. Why in LO alone this is the methodology for extraction and why not in other extractions like COPA or HR or FISL or anything ? What is the reason for these unique steps in LO extraction alone ?
    Kindly let me know the answer.
    Best Regards,
    Fanie Hudson.

    This question has already been posted several times and lot of documents are available.
    Have a look at these discussions:
    set up tables
    Set up tables
    Set up tables
    view of set up tables data in se11??????????
    Set Up tables..
    lo: delete set up tables: DOUBT
    Blogs of Roberto will be useful as well:
    /people/sap.user72/blog/2004/12/16/logistic-cockpit-delta-mechanism--episode-one-v3-update-the-145serializer146
    LOGISTIC COCKPIT DELTA MECHANISM - Episode two: V3 Update, when some problems can occur...
    LOGISTIC COCKPIT DELTA MECHANISM - Episode three: the new update methods
    LOGISTIC COCKPIT - WHEN YOU NEED MORE - First option: enhance it !
    LOGISTIC COCKPIT: a new deal overshadowed by the old-fashioned LIS ?
    award points if useful

  • Problem about fill set up table

    Hi all,
    I got a problem when I run the fill set up table for sales billing data source. what I did is:
    first delete the setup table then oli9bw->type in a sales document no.(as I only want this order data), then give a run name, last execute, but I got the message as follow:
    Data source 2LIS_13_VDITM contains data still to be transferred
    Could you pls explain what this means, and what should I do to solve the problem
    Thanks

    Set up table definition
    Setup table is store the historical data, where as the delta records are updated in delta queue not to set up table.
    So once historical data is loaded you can delete the contents of the set up table.
    name is extract sturcture of your data source + setup
    also data is taken from setup table when an init / full/ full repair load is done.
    so in order to take ur records from the table delete the setup table(LBWG) and initialize it with ur records.
    You can find the contents SE16
    Filling set up tables
    transac LBWG
    + SBIW -> Logistics -> Managing Transfer Information Structures-> Setup of Statistical Data-> Application-Specific Setup of Statistical Data
    set up tables
    Set up tables
    Set up tables
    view of set up tables data in se11??????????
    Set Up tables..
    lo: delete set up tables: DOUBT
    LBWQ is the extraction queue and RSA7 is delta queue. Data is sent to delta queue from extraction queue through collective job scheduled in transaction LBWE.
    when we want to extract the data using LO Cockpit, the data will be come to the extraction queue first and from there it will processed to the delta queue. SO lbwq works as a outbound queue.
    If the update mode is Unserialised V3 then as soon as the document is posted it comes update table which you can see in Tr. Code SM13. After the jonb is scheduled the records come to RSA7 i.e delta queue from which BW pulls the data
    If you use u201CQueued Deltau201Dupdate method then the data moves to Extraction queue(LBWQ). Then run Collective update to move the data from LBWQ into Delta Queue (RSA7). Then schedule the data using the infopackage by selecting Delta Load in the update tab.
    So in If you are going to do Setup table filling, delete the data from LBWQ.
    The usage of Extraction queue(LBWQ) comes in to picture in delta loading. But actually system starts collecting the data (whenever there is document creation in R/3) after activating the EXtraction structure.
    Steps to Be Performed
    We know that there are 4 types of delta extraction that are available in LO. If you use u201CQueued Deltau201Dupdate method then the data moves to Extraction queue(LBWQ). Then run Collective update to move the data from LBWQ into Delta Queue (RSA7). Then schedule the data using the infopackage by selecting Delta Load in the update tab.
    Here is Roberto's weblog:
    /people/sap.user72/blog/2005/02/14/logistic-cockpit--when-you-need-more--first-option-enhance-it
    /people/sap.user72/blog/2004/12/16/logistic-cockpit-delta-mechanism--episode-one-v3-update-the-145serializer146
    /people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
    check this out...
    LBWQ - T code is for what?
    Ttransaction LBWQ
    What is LBWQ?
    Assign points if it helps
    Hope it helps
    regards
    Bala

  • Regarding SET UP table filling

    Hi All
    I have a small doubt,
    Why do we need to fill the set up table when there is not user activity in the source system?
    Is this going to lock the application tables like vbak, vbap, vbuk etc,.,?
    what happends if i run the statistical run when the users are active in the system?
    I want to do set up fill for orders starting from 2005 to July 2009.
    When is the best time?
    regards
    Janardhan KUmar K

    Hi,
    Prod system will be busy during your set up tables filling time.
    Try to check ECC system load burden and fill set up tables data when system have required free application servers(SM50/51). Even try to fill set up tables in background.
    if possible, use selections and fill set up tables.
    Thanks.

Maybe you are looking for