SET UP THE AD FS 2.0 VM LAB ENVIRONMENT
I'm trying to setup ADFS Lab environment to test a few scenarios. The document that I've been following is
HOW TO SET UP THE AD FS 2.0 VM LAB ENVIRONMENT FOR FEDERATED COLLABORATION
Microsoft Corporation
Published: May 2010
Version: 1.0
Authors: Brad Mahugh, Tariq Sharif
However the link (below) to download VMs is broken. can you please provide me the latest links that are working?
i.e. Microsoft Download Center (http://go.microsoft.com/fwlink/?LinkId=148506).
Thanks!
Hi,
I wasn’t able to find the resources you need, sorry about that.
Although you may get a useful response from ADFS forum as blow:
Claims based access platform (CBA), code-named Geneva Forum
http://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=Geneva
Best Regards,
Amy Wang
Similar Messages
-
Set-up the Airport Extreme in a Windows only environment
Hi all
Here's the deal. Being abroad for a couple of months, my employer has fixed me a free dial-up internet connection for my temporary home. At work (abroad, that is), I have a broadband connection, so the home dial-up connection is only for very sporadic use, as most of what I'm doing over the internet can be done during the working day, at broadband speed.
It would be neat though, to be able to connect wirelessly on my Dell WinXP laptop over this dial-up connection at home, the few times I'm going to use it. So I thought eBaying one of those nice "old" hockey puck Airport Extremes with built-in 56k modem.
From what I understood, the AE doesn't have a web-based configuration interface, like most broadband routers have, but one needs to configure it installing a software utility, right? Being in a Windows only environment, will I be able to configure my Airport Extreme-to-be using the Windows software on <http://docs.info.apple.com/article.html?artnum=75422>? Does anyone of you have any experience with this? If so, could you reassure me that this is actually a feasible idea?
Does the AE dial-in automatically whenever you're generating traffic, by the way, or do you still have to establish the connection manually?
Thanks for the replies
ivq
Windows XPIt would be neat though, to be able to connect
wirelessly on my Dell WinXP laptop over this dial-up
connection at home, the few times I'm going to use
it. So I thought eBaying one of those nice "old"
hockey puck Airport Extremes with built-in 56k
modem.
That should work.
From what I understood, the AE doesn't have a
web-based configuration interface, like most
broadband routers have, but one needs to configure it
installing a software utility, right?
Correct
Being in a
Windows only environment, will I be able to configure
my Airport Extreme-to-be using the Windows software
on
<http://docs.info.apple.com/article.html?artnum=75422>
Yes.
http://www.apple.com/support/downloads/airport42forwindows.html
? Does anyone of you have any experience with this?
Yes
If so, could you reassure me that this is actually a
feasible idea?
Yes if does work.
Does the AE dial-in automatically whenever you're
generating traffic, by the way, or do you still have
to establish the connection manually?
You can configure it that way, but it is easier to use Jon Sevy's Java utility.
Jon Sevy has a Java Utility for this purpose.
You will need Java in order to run the utility -
I have been given permission for unlocking my iphone 3 GS from Orange. I want to set up the phone for my wife to use with a new number and carrier. Do I unlock under my itunes account first ( I now have a new iphone on this account) or set one up for her and then unlock the phone. I am worried about upsetting the new phone.
I would complete unlocking as is and then
restore as new once you know the iPhone is unlocked
Be aware Orange will process the request at their speed
one of the reasons they usually reside at bottom of User Sat surveys
will likely take weeks
This may also help
http://support.apple.com/kb/HT5014 -
Using a Variable in SSIS - Error - "Command text was not set for the command object.".
Hi All,
I am using a OLE DB Source in my dataflow component and want to select SQL Query from the master table I have created variables v_Archivequery
String packageLevel (to store the query).
<Variable Name="V_Archivequery" DataType="String">
SELECT a.*, b.BBxKey as Archive_BBxKey, b.RowChecksum as Archive_RowChecksum
FROM dbo.ImportBBxFbcci a LEFT OUTER JOIN Archive.dbo.ArchiveBBxFbcci b
ON (SUBSTRING(a.Col001,1,4) + SUBSTRING(a.Col002,1,10)) = b.BBxKey
Where (b.LatestVersion = 1 OR b.LatestVersion IS NULL)
</Variable>
I am assigning this query to the v_Archivequery variable, "SELECT a.*, b.BBxKey as Archive_BBxKey, b.RowChecksum as Archive_RowChecksum
FROM dbo.ImportBBxFbcci a LEFT OUTER JOIN Archive.dbo.ArchiveBBxFbcci b
ON (SUBSTRING(a.Col001,1,4) + SUBSTRING(a.Col002,1,10)) = b.BBxKey
Where (b.LatestVersion = 1 OR b.LatestVersion IS NULL)"
Now in the OLE Db source, I have selected as Sql Command from Variable, and I am getting the variable, v_Archivequery .
But when I am generating the package and when running I am getting bewlo errror
Error at Data Flow Task [OLE DB Source [1]]: An OLE DB error has occurred. Error code: 0x80040E0C.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E0C Description: "Command text was not set for the command object.".
Can Someone guide me whr am going wrong?
Please let me know where am going wrong?
Thanks in advance.
Thankx & regards, Vipin jha MCPWhat happens if you hit Preview button in OLE DB Source Editor? Also you can use the same query by selecting SQL Command option and test.
Could you try set the Delay Validation = True at Package and re-run ?
If set the query in variable expression (not in value), then Set Evaluate As Expression = True.
-Vaibhav Chaudhari -
We bought a DYMO Label Writer 4XL. We want to print thermal labels from our Mac and PC, wireless. The good thing is that I already have the printer set in the network and added on each of our computers (Mac and Windows 8). For printing regular labels you can use the Dymo software; for printing postage labels from ebay or paypal has been impossible.
From ebay I even tried one label at the time but still did not work. I sent the the print command from the mac-print-window, changing each of the settings (such as paper size) but did not work. Each time (no matter if you want to print one label only) it advances more than one lable.
http://community.ebay.com/t5/Miscellaneous/Using-a-thermal-printer-for-eBay-labe ls-using-a-Mac/qaq-p/3135261 (post by stormshock)
Through Paypal is a different story. It should be easy cause it seems the Zebra Driver in Paypal works with this DYMO. The issue is how to get the system to send the print command to the DYMO printer through the Zebra LP2488? please help! I know some people have succeded making all these work. What am I missing?
http://www.amazon.com/review/R3E73A6ZX39ZZQ/ref=cm_cr_pr_cmt?ie=UTF8&ASIN=B002M1 LGJ4&linkCode=&nodeID=&tag=#wasThisHelpfulTo whomever is reading this post I just wanted to let you know I returned the Dymo 4XL. Their customer service is horrible. Technical support does not exist at all. The issue was extremely frustrating and time consuming. I do not recommend this thermal printer at all. Good luck finding one... if you do, please share.
-
Can't SEND email from Telus account in Alberta, Canada, unless I go to web mail. Does anyone know how to set up the Outgoing server? Incoming is fine. Outgoing used to work. We changed it when we went to another location, and can't get it back. Telus support can't fix it. Neither smtp.telus.net NOR mail.telus.net works for Outgoing server to send mail. Please help! Thanks.
iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
iPad Mail
http://www.apple.com/support/ipad/mail/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
Cheers, Tom -
How to set up the communication channel for third party idoc
Hello,
I am trying to send an idoc from an sap 4.6c system to an third party system. The third party system is supporting idcos with trfc.
My problem is to set up the communication channel in the integration builder (configuration) for the third party system. The idoc is waitung in XI to transport.
My settings are:
adapter type: idoc
transport protocol: idoc
message protocol: idoc
adapter engine: integration engine
rfc destination: xyz (is working fine)
interface version: sap release 4.0 or higher
port: ??
sap release 46c
My problem is the port. should i set up a port in idx1? But the third party is not an sap system and so i dont have a client.
On the xi i have defined a port in transaction we21 (transactional rfc) for the third party with my rfc destination xyz. But if i enter that port in communication channel i got error messages.
Thanks for any help.Hi Christian,
yes, you have to mainztain that port in idx1.
First ypi load the rfc-metadata from an SAP referenzsystem and afterwards copy this metadata to the third party port.
For further details check the onlinedocumentation "IDoc Processing with the IDoc Adapter" XI -> runtime -> adapter
Good luck,
Holger -
This is a variation on the issue mentioned in this
post
We are using SP 2010 Content Hub to manage our content types. On the content hub we've created a couple of exteranl lists, and then created some site columns as lookups against these lists. We then added the columns to one of our content types
and set it to publish.
After the publishing job executed, I tried adding the content type (which now appears on the subscriber sites) to one of the document libraries on one of the subscriber sites. When I did that it threw the following error:
Microsoft.SharePoint.WebControls.BusinessDataListConfigurationException: Id field is not set on the external data field
at Microsoft.SharePoint.SPBusinessDataField.CreateIdField(SPAddFieldOptions op)
at Microsoft.SharePoint.SPBusinessDataField.OnAdded(SPAddFieldOptions op)
at Microsoft.SharePoint.SPFieldCollection.AddFieldAsXmlInternal(String schemaXml, Boolean addToDefaultView, SPAddFieldOptions op, Boolean isMigration, Boolean fResetCTCol)
at Microsoft.SharePoint.SPContentType.ProvisionFieldOnList(SPField field, Boolean bRecurAllowed)
at Microsoft.SharePoint.SPContentType.ProvisionFieldsOnList()
at Microsoft.SharePoint.SPContentType.DeriveContentType(SPContentTypeCollection cts, SPContentType& ctNew)
at Microsoft.SharePoint.SPContentTypeCollection.AddContentTypeToList(SPContentType contentType)
at Microsoft.SharePoint.SPContentTypeCollection.AddContentType(SPContentType contentType, Boolean updateResourceFileProperty, Boolean checkName, Boolean setNextChildByte)
at Microsoft.SharePoint.SPContentTypeCollection.Add(SPContentType contentType)
at Microsoft.SharePoint.ApplicationPages.AddContentTypeToListPage.Update(Object o, EventArgs e)
at System.Web.UI.WebControls.Button.OnClick(EventArgs e)
at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument)
at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) b55297ed-717f-466d-8bdc-297b20344d3f
I checked the external content type configuration and it did specify an "id column". Anyone know if what I am attempting to do is possible and if so, what special configurations are required?
ThanksThe issue is not External Content type or external list but the look up column.
It's not possible to publish a look up column via the Content Type Hub.
If you need to do this then an alternate way is to use a Managed Metadata column instead, otherwise you will have to implement this via a feature.
Varun Malhotra
=================
If my post solves your problem could you mark the post as Answered or Vote As Helpful if my post has been helpful for you. -
I've done everything I know in order to get my calendar in iCloud synchronized with my macBook, my IPad and my iPhone, but get no success. I've checked if all devices are set to the same account. Can you help me?
The only thing I can see strange is that when I login my iCloud account through my principal email address, when I check my preferences is marked an @me.com address that is old and I don't use it anymore, but I can't erase it or even change it.
-
How do I use GarageBand as a amp/speaker to listen to my Electronic Drum set? I have a MIDI-USB cord already but I can't figure out how to listen to my set through the software using my computer speakers?
If you want to listen to the sounds of your drum set, you should use an audio cable and connect it to the computer's line-in, then create a real instrument track.
If you use a Midi/USB interface, you'll have to create a software instrument track and select one of GB's drumsets as the instrument. Hopefully your drumset's midi notes are mapped to the right sounds in GB. -
hi..I cant activate my Iphone 5. I bought this from someone who cant remember her apple password and even the email address that she used to set up the account.What am I gonna do now....How can I activate my Iphone. what are my options...pls help me.thank you
Activation Lock in iOS 7 > http://support.apple.com/kb/HT5818
hannibalfromlemery wrote:
.I cant activate my Iphone 5. I bought this from someone
The Apple ID and Password that was Originally used to Activate the iDevice is required.
If you cannot get this information from the seller
Removing a device from a previous owner’s account
You need to return the Device for a refund, as you will not be able to re-activate it. -
Email will not setup "Do you want to try setting up the account without SSL"
email will not setup, get message "Do you want to try setting up the account without SSL"
Is that a question? hard to tell
How about some info
What email (yahoo? gmail? compuserve?)
On what (the ipad? vista?)
Did you do anything in response to the question other than post here? -
How to set/get the values thru Wedbynpro coding for User mapping fields
Hi All
In system object we have the user mapping fields like District,city,plant,Salesmanager.
now we want to set/get the values of these usermapping fields of system object thru webdynpro coding...
if anybody have sample codes of the same then it would be great help to me
Thanks in advance
Thanks
Trisha RaniHi Kavitha
Thanks for your reply
My requirement is exactly as follows.
1) i have created one portal system object in system administration and also i created usermapping fields in the system object from the usermanagement in system object.
i created the user mapping fields like Plant,SalesManager,District etc.
i also created the system alias name for the same system object
2) Now i came to persoanlize link and mapped the system object to the portal user.
while mapping to the system object we need to enter Mapping userId, Password , once we enter these values and we can also enter the values of usermapping fields which we defined while creating the system object ( for example District,Salesmanager,Plant etc)
once we enter all the values and click on save then these usermapping values to be mapped to the portal user.
3) Now my requirement is , i want to control the usermapping field values thru webdynpro coding for setting/getting the values.
I need sample code of the same.
Please let me know if u need more details on the same.
Thanks
Trisha Rani -
I can no longer make my AOL e mail work with Mac Mail on all my devices. When I try to set up the account and put in the correct aol account and password I get the message "Unable to verify account name or password". I know the account name and password is correct as I can open the AOL e mail page on Safari. I have changed the password, and it still does not work. AOL tech support has been no help. AOL email worked for years but last week due to suspected spam activity AOL locked my AOL account. I got that straightened out but now i cannot set it up on any of my devices: Macbook Air, Ipad, I pad mini and iPhone 6 without that message. I took everything to Apple store and everything is set up correctly on my devices. AOL tech support is no help and keeps giving me different solutions and answers, none of which has worked. Any solutions out there? All my Apple Software is up to date on all my devices
Delete your Gmail account from the Mail/Contacts/Calendars settings page, and then add it back in using the new Gmail password.
Matt -
i have problem with my wifi in 4 S, i cant connect to any wifi itried resetting network setting and reset all setting but the result was the same, its only keeps searching for wifi and cant find any, itried to use OTHER but also didnt work.please help me???
If Join was on then your home wi-fi must be set to Non-Broadcast. If you did not set this up (maybe your provider did) then you will need to find the Network Name they used, and any password they used. The SSID is Security Set ID and to see more try http://en.wikipedia.org/wiki/SSID . Basically it is the name used to identify your router/network. A lot of times the installer will leave it set as LinkSys, or Broadcom or whatever the manufacturer set it as for default. Your best bet is to get whoever installed it to walk you through how they set it up, giving you id's and passwords so you can get in. HOWEVER, if you are not comfortable with this (if you set security wrong, etc.) you would be well ahead of the game to hire a local computer tech (networking) to get this working for you. You can also contact the vendor of your router and get help (if it is still in warranty), or at least get copies of the manuals as pdf files. Sorry I can't give you more help, I hope this gives you an idea where to go from here to find more.
Maybe you are looking for
-
I have been a proud owner of Apple products for many years. However, this problem is very frustrating! Any help will be appreciated. I used the migration tool to transfer the contents of my old MacBook Pro to my new shiny MacBook Pro Retina! After mi
-
Very Urgent: Thread 1 cannot allocate new log, sequence 6 : Script stuck
I am running one script, it is stuck with log file showing: Thread 1 cannot allocate new log, sequence 6 All online logs needed archiving Current log# 7 seq# 5 mem# 0: /u13/sjmarte/oradata/redo7a.log I have checked the database: it is in archivelog m
-
Repository Logical Column Transactional Update Failed [nQSError:37005]
Hello, I use version 11.1.6 of the admin tool and bi server. The repository has no errors and and I can save it BUT as soon as I add a logical column and try to to the consistency check I get the error: Transactional Update Failed [nQSError:37005] If
-
ITunes error with DEP???
I am having trouble opening itunes, keep getting the DEP stopped it window popping up. have uninstalled/reinstalled/repaired everything as forums say to but still no joy.even installed iTunes 8, which opened fine! but then needed version 9 to recogni
-
DynamicStreamingResource bugfix request!
I've been losing hair over debugging auto MBR behavior just to realize that auto MBR indexing sometimes bugs out, when looking up streams by name sometimes it returns an incorrect index value when calling the internal 'indexFromName' on a DynamicStre