Set up TM w/Limited Access to one laptop & Full Access to another?

Dear Apple,
I just received my Apple 1 TB Time Capsule. Can someone please help me with a network configuration I want to set up?
I have a cable modem, and, three computers: a G4 iMAC (system 10.5.5), an Apple MacBook (system 10.5.5), and, a PC laptop.
The Time Capsule is connect directly to the cable modem.
Regarding the computers:
(1) I want the G4 iMAC to connect directly, via an Ethernet cable, to the Time Capsule, WITH FULL ALLOWED ACCESS to the Time Capsule and to the back-up function of the Time Machine feature, and, with allowed access to my HP inkjet printer (class 6110);
(2) I also want the MacBook laptop to wirelessly link to the Time Capsule via the Airport utility on the laptop, and, WITH FULL ALLOWED ACCESS to the Time Capsule and to the back-up function of the Time Machine feature (using WPA/WPA2 security, and, without the network name visible to third parties), and, WITH allowed access to my HP inkjet printer (class 6110);
(3) I want the PC laptop to wirelessly link to the Time Capsule (using WEP security), but WITHOUT ACCESS to the Time Machine, WITHOUT access to the back-ups on the iMAC, WITHOUT access to the back-ups on the MacBook, and, WITHOUT access to the inkjet printer --- I only want the PC to use the Time Capsule as a WIRELESS ROUTER so that the PC laptop can access the internet.
(4) And, finally, I want to specify (Time-Capsule/Time-Machine/server ) access ONLY to the iMAC and the MacBook, so that others cannot gain any access.
I specifically need help to set up and configure the Time Capsule so that the PC laptop, as stated above, should have limited access to the Time Capsule --- namely, only to access the internet, and, not even be aware of stored data on the Time Capsule, not even be aware of the inkjet printer, and, not even see my WPA network name when the PC scans for wireless devices.
I also want the iMAC and the MacBook to have access to each other’s data stored on the Time Capsule (like a common server).
I have an old D-Link DI-624 wireless router that I used before buying the Time Capsule, which is available, if needed. Hopefully, I can configure the Time Capsule so that I would not need the old D-Link.
Thank you in advance,
David.

Not a problem. I just wanted to point out that you won't get any "official" answers from Apple on this board. It is all user to user and we only know what we know and some of the time it is conjecture on how to fix a problem if we've never seen it before. I try to point out when I'm guessing, but I don't always remember to rephrase my statements.
I'm not sure how to set up the Time Machine, but look for an option to only serve out files via AFP (Apple Filing Protocol) only. Turn off SMB sharing, if possible. The PC won't be able to understand AFP--it communicates via SMB (Server Message Block). I would think you should be able to set up
If the PC can use WPA or WPA2, use that instead of WEP. There is no way to set up special passwords for individual users on a wireless network. It is all or nothing. Now, the wireless password could be different than the password needed to access the files, I think. So, you could set up a simple WPA password for wireless, but set up user accounts with strong passwords for the file server. Again, I don't have Time Capsule, so I don't know how to set it up. Hopefully, I've put enough keywords in for you to look through the configuration options and get it set up.
As long as this thread stays open and unanswered, more people might look in and have a more specific answer for you.

Similar Messages

ICloud, one pass = full access to your data

Hi,
I wonder what are the best practices for securing your data in iCloud.
Not so long time ago we had all our data on PC's hard drive and we were doing backups - I was personally doing it every sunday on a seperate hard drive.
Since now, when we use for example iPhone+iPad and got more and more personal data and everything is stored in iCloud - aren't you afraid the simply when your password becomes known to someone (accidentaly or by a virus/keylogger etc.) you can say goodbye to all your data even though you were doing backup every time you were charging iPhone/iPad...

they only way that some one can get your password is if you give it to them or one of the worlds best hackers hack the icloud server. So really i would not worrier about it

Change public share access to read only for public and full access to selected users

Hi, new to the community just purchased a recertified WDMyCloud 2TB after my 2 years old MyBookLive 2TB HD died due to accidental power cable unplugging. I've got everything setup including MiniDLNA by following instructions on this forum and everything is working exactly as I want it to except public share. I want public share to be set to read only access for public and full access to certain users (just myself at the moment) and having a "upload" folder within this share with full public access to everything in this folder would be a bonus. I tried login in to ftp with root user and removing write permission for public but that blocks me out as well. I'm sure it's possible by doing some majic on SSH but I wouldn't have a clue so hoping someone here would be able to help me out.

Mr_Khan wrote:
What i want is public to have read only access to file server. Public as in users who do not have a user account on mycloud. E.g someone who connects to to my home network for the first time and is able to browse and download content from public share. I'm aware of being able to set indivual access to shares for users like full access, read only and no access but public users won't have a user account.Through the My Cloud UI interface what you seek to do is not possible. The public share like all other share folders are an all or nothing affair when using the adminstration UI. When using the administration UI you do not have granular control on shared folders to limit non users to read only access or set permission levels for subfolders. The workaround to do what you seek and have the public folder set for read only is to change the folder settings via SSH. It may take some work to set the folder security so that users can read/write to the public folder while the guests only have read access. However, if you reboot the WD My Cloud or update the WD My Cloud firmware those settings may be reset back to the default settings where the entire public folder is read/write for all. There are way to prevent this but again it will take a bit of coding to do so via SSH. See this link (even though its for the WD My Book Live) for a starting point on how to use SSH to change the permission levels on the public folder. Another option if one doesn't go the SSH route is to turn off public sharing for the public folder then create a "guest" user account and give that "guest" account read only access to the public folder while all other user accounts have full read/write access.

How to set up full access and limited access wireless networks to laptops

Dear Apple,
I just received my Apple 1 TB Time Capsule. Can someone please help me with a network configuration I want to set up?
I have a cable modem, and, three computers: a G4 iMAC (system 10.5.5), an Apple MacBook (system 10.5.5), and, a PC laptop.
The Time Capsule is connect directly to the cable modem.
Regarding the computers:
(1) I want the G4 iMAC to connect directly, via an Ethernet cable, to the Time Capsule, WITH FULL ALLOWED ACCESS to the Time Capsule and to the back-up function of the Time Machine feature, and, with allowed access to my HP inkjet printer (class 6110);
(2) I also want the MacBook laptop to wirelessly link to the Time Capsule via the Airport utility on the laptop, and, WITH FULL ALLOWED ACCESS to the Time Capsule and to the back-up function of the Time Machine feature (using WPA/WPA2 security, and, without the network name visible to third parties), and, WITH allowed access to my HP inkjet printer (class 6110);
(3) I want the PC laptop to wirelessly link to the Time Capsule (using WEP security), but WITHOUT ACCESS to the Time Machine, WITHOUT access to the back-ups on the iMAC, WITHOUT access to the back-ups on the MacBook, and, WITHOUT access to the inkjet printer --- I only want the PC to use the Time Capsule as a WIRELESS ROUTER so that the PC laptop can access the internet.
(4) And, finally, I want to specify (Time-Capsule/Time-Machine/server ) access ONLY to the iMAC and the MacBook, so that others cannot gain any access.
I specifically need help to set up and configure the Time Capsule so that the PC laptop, as stated above, should have limited access to the Time Capsule --- namely, only to access the internet, and, not even be aware of stored data on the Time Capsule, not even be aware of the inkjet printer, and, not even see my WPA network name when the PC scans for wireless devices.
I also want the iMAC and the MacBook to have access to each other’s data stored on the Time Capsule (like a common server).
I have an old D-Link DI-624 wireless router that I used before buying the Time Capsule, which is available, if needed. Hopefully, I can configure the Time Capsule so that I would not need the old D-Link.
Thank you in advance,
David.

The basic method for remote access is not changed.
http://gigaom.com/apple/access-your-time-capsule-over-the-internet/
You have a few issues.
The really big one.. the school firewall should not let you connect to home.
Check the IT admin at your school but if they allow anything but a few protocols like http and https through, they are not doing their job. You cannot afford in a large network to have every Tom Dick and Harry access any open device.. that can introduce viruses and trojans into the network behind the firewall.
The general method for remote access on large networks is vpn and the TC offers no vpn connection.. just AFP.
If you intend using 3G wireless stick or the like then you can get access.
The next issue is static public IP or how to find the TC.. you need some way to find the IP if your ISP does not offer static ip, and the tc has no dyndns client. Since Apple shut down new users for mobileme and will close that service there is no method to find the TC IP without owning your own domain. You would be better placing the TC in bridge behind a router that does offer dyndns and port forward AFP (TCP 548) to it.

Provision a RO several times with one user using Access Policies

Hello,
we need to provision several Unix machines and for this purpose, we use one only resource object (SSH User). Additionallyl, we created an access policy for every machine:
- Access Policy Unix Server 1
- Access Policy Unix Server 2
- Access Policy Unix Server N
We created the following group in OIM: SSH Group.
We set the policies in such a way that whenever a user is added to the SSH Group, the SSH User RO is provisioned with the user for every machine. We created several access policies, because the parameters of the form are different for every machine.
The problem is that when a user is added to the SSH Group, the SSH User resource object is provisioned only once. It is provisioned by the access policy with the highest priority. We would like that the SSH User RO was provisioned by every access policy. That is, the user should have the SSH User RO provisioned N times, after adding it to the SSH Group.
Is there any way to achieve this without creating a resource object for every Unix Machine? We need to provision more than 300 Unix machines and this would require a lot of time...
Thank you for your help

There are other options. You could create a child table to hold the IT Resource information, assuming all parent data is the same for every system. Then on the insert/delete to child table entries, you can provision and de-provision from that target. On disable/enable you would need to search through the child table and perform the action against all instances. The same for the other update tasks.
This is the limitation of access policies. They manage a single resource object target instance. You could also code a generic resource that has child table entries. When an insert happens, you can use the APIs to provision and instance of the specific target with the provided details. Then you could create access policies to add entries to the child table, and each would provision the appropriate object, and deprovision too.
Takes some custom code, but it's doable. Just remember though that they are all still the same resource object, so reporting would show them all, as well as attestation, as a single instance, with multiple provisioned to each user.
Another option is to duplicate the work flow using find and replace in the XML and generate a unique workflow for each instance.
-Kevin

Limiting MDB to one instance per cluster

I'm working on a Weblogic setup that has one cluster consisting of three servers. We have one queue in particular whose MDB does a lot of database access. We're running into locking problems with the database because Weblogic is running an instance of the MDB on each of the three servers at the same time and they are stepping on each other's toes.
          I would like to limit the queue so it only runs on one server in the cluster. The pool size for this MDB is set to "1". I thought this would limit the total number of MDBs to one, but apparently it limits it to one per server.
          Any idea what sort of configuration I need to make sure only one instance of the MDB exists in the cluster? Do I need to turn this into a distributed queue and do something with load balancing?
          Thanks,
          Matt

Thanks for the reply.
          I looked around and I couldn't find a way to target the MDB to a specific server. I can target the JMS server, but not a single MDB. The way I have it setup currently, the JMS server is targeted to one server in the cluster (non-migratable).
          How do I target a MDB to a specific server?
          Matt

I use more than one computer to access my four business email accounts. When one computer is on (and mail is open) emails do not get through to the other computers. This is fine, but how do I make one of the other computers the dominant one?

I use more than one computer to access my four business email accounts. When one computer is on (and mail is open) emails do not get through to the other computers. This is fine, but how do I make one of the other computers the dominant one?

I assume these are POP accounts and all computers are set to remove from Server after downloading.
So on the non dominant ones... Mail Preferences>Accounts, highlight an account, Advanced tab, uncheck remove from Server, just have the main dominant one remove from server.
Or get/setup IMAP accounts.

How do I set up an administrator account so my daughter who is under 13 , so she can access itunes herself. Main access will be via itunes vouchers . I don't want to create credit card access.

how do I set up an administrator account so my daughter who is under 13 ,
can access itunes herself. Main access will be via itunes vouchers . I don't want to create credit card access.

There is no such account. The iPod is really a one-user device
Create a NEW account/ID for her using these instructions. Make sure you follow the instructions. Many do not and if you do not you will not get the None option. You must use an email address that you have not used with Apple before.
Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card
You can then redeem a gift card(s) into the account

How to set cookie value in one page and retrieve in another page using setA

How to set cookie value in one page and retrieve in another page using setActionListener?
I have tried with following code srcpage.jspx->destpage.jspx
srcpage.jspx
<af:table value="#{bindings.DepartmentsView1.collectionModel}"
var="emp" rows="#{bindings.EMPView1.rangeSize}"
first="#{bindings.EMPView1.rangeStart}"
emptyText="#{bindings.DepartmentsView1.viewable ? 'No rows yet.' : 'Access Denied.'}">
<af:column sortProperty="EmployeeName" sortable="false"
headerText="Cookie Testing">
<af:commandLink text="#{emp.EmployeeName}" action="success">
<af:setActionListener from="#{emp.EmployeeName}"
to="#{cookie}"/>
</af:commandLink>
</af:column>
</af:table>
espage.jspx
<af:outputText value="Test Cookie Value: #{cookie}"/>
,Here Test Cookie Value prints the following instead of its original String value
{JSESSIONID=javax.servlet.http.Cookie@7da288, oracle.uix=javax.servlet.http.Cookie@399f62}
I have passed employee name "Robert" to cookie in srcpage.jspx,but it prints "JSESSIONID....." instead of "Robert" in destpage.jspx
Thanks in advance
Kalee

Hi,
"cookie" is a reserved name. If you want to write to a session scope attribute called "cookie" then you have to call #{sessionScope.cookie}. If you want to use EL to set and read from cookies then you will have to use
#{cookie.cookieName}
Note that #{cookie} writes to and returns a map
check this: http://www.informit.com/articles/article.aspx?p=30946&seqNum=7
Frank

SDP-25108: One or more addresses from Access Point {0} is already registered by another application.

We create SOA Project which use UMS Adapter to notify any incoming Email
and i received this issue in soa server "
[sdpm/ReceivingQueuesInfo=OraSDPM/QueueConnectionFactory:OraSDPM/Queues/OraSDPMAppDefRcvQ1, Principal=<ANY>, AppInstanceName=null, Delegate=null, AppName=default/Project2!1.0, ClientVersion=11.1.1.7.0, ClientType=POJO].
[2014-04-23T22:02:17.619+03:00] [soa_server1] [NOTIFICATION] [] [oracle.soa.adapter] [host: sameer-PC] [nwaddr: 10.1.1.101] [tid: [ACTIVE].ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 0000KMFxn974ioy707MaMF1JLnN^00000C,0:1] [APP: UMSAdapter] [DSID: 0000KMFqsL^FW715zvs1yW1JM0K^000008] [TARGET: /Farm_base_domain/base_domain/soa_server1/UMSAdapter] [TARGET_TYPE: j2ee_application] UMS Adapter AccessPoint : [email protected]
[2014-04-23T22:02:17.624+03:00] [soa_server1] [ERROR] [] [oracle.soa.adapter] [host: sameer-PC] [nwaddr: 10.1.1.101] [tid: [ACTIVE].ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 0000KMFxn974ioy707MaMF1JLnN^00000C,0:1] [APP: UMSAdapter] [DSID: 0000KMFqsL^FW715zvs1yW1JM0K^000008] [TARGET: /Farm_base_domain/base_domain/soa_server1/UMSAdapter] [TARGET_TYPE: j2ee_application] UMS Adapter UmsEndpoint.registerUmsAccessPoints(..) - Error duing registering access points..
[2014-04-23T22:02:17.625+03:00] [soa_server1] [ERROR] [] [oracle.soa.adapter] [host: sameer-PC] [nwaddr: 10.1.1.101] [tid: [ACTIVE].ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 0000KMFxn974ioy707MaMF1JLnN^00000C,0:1] [APP: UMSAdapter] [DSID: 0000KMFqsL^FW715zvs1yW1JM0K^000008] [TARGET: /Farm_base_domain/base_domain/soa_server1/UMSAdapter] [TARGET_TYPE: j2ee_application] UMS Adapter
[2014-04-23T22:02:17.627+03:00] [soa_server1] [ERROR] [] [oracle.soa.adapter] [host: sameer-PC] [nwaddr: 10.1.1.101] [tid: [ACTIVE].ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 0000KMFxn974ioy707MaMF1JLnN^00000C,0:1] [APP: UMSAdapter] [DSID: 0000KMFqsL^FW715zvs1yW1JM0K^000008] [TARGET: /Farm_base_domain/base_domain/soa_server1/UMSAdapter] [TARGET_TYPE: j2ee_application] UMS Adapter Error during ums adapter endpoint activation
[2014-04-23T22:02:17.629+03:00] [soa_server1] [ERROR] [] [oracle.soa.adapter] [host: sameer-PC] [nwaddr: 10.1.1.101] [tid: [ACTIVE].ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 0000KMFxn974ioy707MaMF1JLnN^00000C,0:1] [APP: UMSAdapter] [DSID: 0000KMFqsL^FW715zvs1yW1JM0K^000008] [TARGET: /Farm_base_domain/base_domain/soa_server1/UMSAdapter] [TARGET_TYPE: j2ee_application] UMS Adapter [[
javax.resource.ResourceException: oracle.sdp.messaging.NoPermissionException: SDP-25108: One or more addresses from Access Point {0} is already registered by another application.
at oracle.tip.adapter.ums.inbound.UmsEndpoint.registerUmsAccessPoints(UmsEndpoint.java:260)
at oracle.tip.adapter.ums.inbound.UmsEndpoint.registerApplication(UmsEndpoint.java:104)
at oracle.tip.adapter.ums.inbound.UmsEndpoint.<init>(UmsEndpoint.java:97)
at oracle.tip.adapter.ums.inbound.UmsListenerEndpoint.<init>(UmsListenerEndpoint.java:47)
at oracle.tip.adapter.ums.UmsResourceAdapter.endpointActivation(UmsResourceAdapter.java:201)
at oracle.integration.platform.blocks.adapter.fw.impl.AdapterFrameworkImpl.endpointActivation(AdapterFrameworkImpl.java:489)
at oracle.integration.platform.blocks.adapter.fw.jca.lifecycle.JCAEndpointActivation.performEndpointActivation(JCAEndpointActivation.java:666)
at oracle.integration.platform.blocks.adapter.fw.jca.lifecycle.JCAEndpointActivation.activateInboundJcaEndpoint(JCAEndpointActivation.java:649)
at oracle.integration.platform.blocks.adapter.fw.jca.lifecycle.JCAEndpointActivation.performActivation(JCAEndpointActivation.java:397)
at oracle.integration.platform.blocks.adapter.fw.metadata.AdapterServiceRevisionRegistry$AdapterServiceRevision.endpointActivation(AdapterServiceRevisionRegistry.java:593)
at oracle.integration.platform.blocks.adapter.fw.metadata.AdapterServiceRevisionRegistry$AdapterServiceRevision.activate(AdapterServiceRevisionRegistry.java:444)
at oracle.integration.platform.blocks.adapter.fw.metadata.AdapterServiceRevisionRegistry$AdapterServiceRevision.setDefaultRevision(AdapterServiceRevisionRegistry.java:409)
at oracle.integration.platform.blocks.adapter.fw.metadata.AdapterServiceRevisionRegistry$AdapterServiceSeries.setDefaultRevision(AdapterServiceRevisionRegistry.java:334)
at oracle.integration.platform.blocks.adapter.fw.metadata.AdapterServiceRevisionRegistry$AdapterServiceSeriesSet.setDefaultRevision(AdapterServiceRevisionRegistry.java:140)
at oracle.integration.platform.blocks.adapter.fw.metadata.AdapterServiceRevisionRegistry.setDefaultRevision(AdapterServiceRevisionRegistry.java:102)
at oracle.integration.platform.blocks.adapter.AdapterService.defaultRevisionChanged(AdapterService.java:347)
at oracle.integration.platform.blocks.deploy.StandaloneCompositeDeploymentCoordinatorImpl.notifyDefaultRevisionListeners(StandaloneCompositeDeploymentCoordinatorImpl.java:280)
at oracle.integration.platform.blocks.deploy.StandaloneCompositeDeploymentCoordinatorImpl.coordinateCompositeDeployment(StandaloneCompositeDeploymentCoordinatorImpl.java:77)
at oracle.integration.platform.blocks.deploy.servlet.BaseDeployProcessor.deployNewComposite(BaseDeployProcessor.java:467)
at oracle.integration.platform.blocks.deploy.servlet.BaseDeployProcessor.deploySARs(BaseDeployProcessor.java:268)
at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeployWork(DeployProcessor.java:203)
at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeployWork(DeployProcessor.java:147)
at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeploy(DeployProcessor.java:134)
at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.process(DeployProcessor.java:100)
at oracle.integration.platform.blocks.deploy.servlet.CompositeDeployerServlet.doPostInsideLoggingSession(CompositeDeployerServlet.java:221)
at oracle.integration.platform.blocks.deploy.servlet.CompositeDeployerServlet.doPost(CompositeDeployerServlet.java:130)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:163)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Caused by: oracle.sdp.messaging.NoPermissionException: SDP-25108: One or more addresses from Access Point {0} is already registered by another application.
at weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:205)
at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:345)
at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:259)
at oracle.sdpinternal.messaging.storage.MessagingStore_urkbp2_EOImpl_1035_WLStub.registerAccessPoint(Unknown Source)
at oracle.sdpinternal.messaging.StoreProxyAdapter.registerAccessPoint(StoreProxyAdapter.java:491)
at oracle.sdpinternal.messaging.MessagingClientImpl.registerAccessPoint(MessagingClientImpl.java:779)
at oracle.sdpinternal.messaging.MessagingClientImpl.registerAccessPoint(MessagingClientImpl.java:231)
at oracle.sdpinternal.messaging.MessagingClientBase.registerAccessPoints(MessagingClientBase.java:120)
at oracle.tip.adapter.ums.inbound.UmsEndpoint.registerUmsAccessPoints(UmsEndpoint.java:253)
... 59 more
[2014-04-23T22:02:17.630+03:00] [soa_server1] [ERROR] [] [oracle.soa.adapter] [host: sameer-PC] [nwaddr: 10.1.1.101] [tid: [ACTIVE].ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 0000KMFxn974ioy707MaMF1JLnN^00000C,0:1] [APP: soa-infra] [DSID: 0000KMFqsL^FW715zvs1yW1JM0K^000008] [TARGET: /Farm_base_domain/base_domain/soa_server1/soa-infra] [TARGET_TYPE: oracle_soainfra] JCABinding=> Project2 Error while performing endpoint Activation: Unable to create Endpoint.[[
[2014-04-23T22:02:17.632+03:00] [soa_server1] [ERROR] [] [oracle.soa.adapter] [host: sameer-PC] [nwaddr: 10.1.1.101] [tid: [ACTIVE].ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 0000KMFxn974ioy707MaMF1JLnN^00000C,0:1] [APP: soa-infra] [DSID: 0000KMFqsL^FW715zvs1yW1JM0K^000008] [TARGET: /Farm_base_domain/base_domain/soa_server1/soa-infra] [TARGET_TYPE: oracle_soainfra] JCABinding=> Project2 [[
Unable to create Endpoint.
thanks
Sameer

The WAP54G's repeater mode essentially sets up the 2nd access point as an extender of the main (root) access point. Since you will be extending the signal, you will need to configure the same wireless settings on both devices. SSIDs, channels, security settings need to be identical. Do set a STATIC IP address for your APs. If your network allows you to use the default IP (192.168.1.245) of the AP, you may set the 2nd unit to have an IP address like 192.168.1.246. The APs need to be in the same network.
An essential step in setting up the AP to repeater mode is indicating the main AP's wireless MAC address. This will register the main device to the second AP and will get them to communicate. To get this info, you need to:
1. Login to the main AP's setup page.
2. Go to Status.
3. Click on the Wireless subtab.
4. Retrieve the MAC address indicated.
Register this info unto the 2nd AP and Save Settings. You may need to reboot the devices to get the connection going. Once the devices are in sync, the client devices should be getting IP addresses assigned by the DHCP server (your DSL modem). To confirm that your setup is operational, you should be able to roam on the network in a location you would not have network access to without the AP on wireless repeater mode.

I am not able to set high and low limits for each channel seperately using LabWindows/CVI

I am using AI_StartAcquisition and AI_ReadAcquisition functions to acquire data using PCI 6025E DAQ card and iam using Lab/Wuindows/CVi5.0 software. But one of my transducer has its range in +/- 500 mV soi need to set the high low limits of each channel seperately for that i am using commond string function(cmd) but still i am not able to set the limits properly. Does anyone has any idea about this trouble

You can set the gain on a per channel basis by using the lower level functions. (As opposed to the easy i/o functions.) For example, look at the "SCANsingleBufSync.C" NI-DAQ shipping example that uses the SCAN_Op() function. It's gain parameter is an array of gains that will allow you to change the input limits for each channel separately.
-Russell

I want to buy Adobe Acrobat XI Pro full version... Limited access vs. full access?

I want to buy Adobe Acrobat XI Pro full version, but I don't know what the difference is between limited access to online services offered by the full version and the full access that's offered by the month-to-month version. In other words, what would I losing by acquiring the full version, rather than just paying the $19.99 per month and get full access to online services? Can someone help clear this up for me? Thanks!

Hi dmoynihan0421,
The retail version of Acrobat costs around US449$ and the monthly subscription is available for a very nominal fee of 19.99$ per month.
The software is the same and there's no difference between the functionality of Acrobat except that in the retail version you have a serial number to permanently activate the software whereas in subscription Acrobat validates the license very month to check if the subscription is active or not.
The main difference between the two however is the Adobe Online services.
When you buy Acrobat XI Pro as a one-time purchase, you get only Acrobat software. No online services are included.
When you subscribe to Acrobat Pro in select countries, you pay a low monthly fee to get:
Acrobat XI Pro desktop software, including any upgrades
The FormsCentral Plus online service for creating and distributing web forms
The Adobe PDF Pack online service that makes it easy to create, convert, and combine PDFs in your browser
Acrobat.com for storing and sharing files in the cloud
The details of these services are as follows:
Adobe online services extend your Acrobat XI working environment to help you streamline and simplify your projects:
Adobe FormsCentral makes it fast and easy to create, distribute, and analyze forms. A desktop version of the online service is included in Acrobat XI Pro. Using the FormsCentral desktop app, you can create unlimited PDF forms for free from scratch or by using professional templates. If you subscribe to Acrobat Pro† or open a free or paid account with the FormsCentral online service, you can also use the desktop app to build web forms and manage form distribution and analysis.
Adobe EchoSign makes it easy to get rid of paper signatures forever. If you open a free or paid account with the service, you can use the Sign pane in Acrobat XI to send documents to others for signature approval and track results online. Recipients can sign electronically without installing software or creating an EchoSign account.
Acrobat.com lets you store and access your files online from within Acrobat or Reader on any device when you sign up for a free account or subscribe† to Acrobat Pro or Acrobat Standard.
Adobe PDF Pack lets you create, combine, and export PDFs from any browser or mobile device. PDF Pack is included when you subscribe† to Acrobat Pro or Acrobat Standard — or you can open a paid account.
Adobe Send is an Adobe online service that lets you send and track large files — including audio and video — without the headaches of email size restrictions. Paid subscriptions are available.
Regards,
Rave

Setup more than one policy in one day using Access Restriction

Anyone can tell me how to set up two policys in one day using Access Restriction ?
For example:
For Weekdays, before 6pm, no restriction to use internet. after 6pm, internet ok, but certain web site or ports need to be blocked.
I can set up policy for after 6pm but then before 6pm, the router consider no-internet access period.
Any advise ?

what you just need to do is to set the policy to allow from 6PM upto the time you wanted your router to give internet access... and just set the status to enable.. type in the LAN mac adress of your router in the edit PC list, then save the settings
"a helping hand in a community makes the world a universe"

How to make single page can only be accessed by one user at the same time

While a user is accessing a page and modifying the data in this page. Other users are blocked for this page. How can it be realized?
Any ideas or help are appreciated.
Edited by: wahaha on Oct 6, 2008 2:49 AM

wahaha wrote:
While a user is accessing a page and modifying the data in this page. Other users are blocked for this page. How can it be realized?Assuming your scenario as you havnt mention anything. So means there are n number of users and you want that if any one of them accessing this page then nobody else will have access to that page.
-> Use flag in DB and whenever user accessing that page set the flag 1 after login and check condition while other user login.
-> After logout back to 0.
Well this is possible one of the solution, not the best one.Try to find some other also.
Sachin Kokcha

Can not get more than one computer to access internet

using airport and can not get more than one computer to access internet wirelessly... currently airport is in bridge mode and internet sharing is set to "off" in network preferences...
help - what should the settings be in airport and network preferences?

are using internet connection as dhcp?
Yes.
bridge mode seems to only work with pppoe connection to internet which is what my set up is
But you've never said why you're using bridge mode (I'm not), which -- as I've explained before -- is probably the reason you can connect only 1 client at a time.
If you'll setup the AX as a regular, main base station, connect using DHCP, and share IP addresses, you should be fine.

Set up TM w/Limited Access to one laptop & Full Access to another?

Similar Messages

Maybe you are looking for