Set Up WebDAV in Pages on iPad

I want to be able to download and upload files to and from my Amazon S3 cloud storage directly within Pages and Numbers on my i[Pad. I had this working for a long time, but unfortunately I had to reinstall the iOS6 versions of Pages and Numbers because the iOS 7 version (Pages 2) creates files that are not openable on my older Mac. Both Apps work fine again, even in iOSt, but now I want this cloud facility to work again. I realise that I can get the files to and from Amazon using iSME, but that is another step or two that I would rather avoid.
However, when I get to the +/Create Document/Copy from WebDAV setup window entitled "WebDAV Sign In" , enter details of my amazon server, username and password I get a message "An error occurred. Please try again".
Does anyone have any advice on how to link Pages to Amazon S3 using WebDAV? I suspect that the formatting of the server and username details is the problem. Unfortunately, I cannot find my notes from when I originally set it up successfully.

You can create folders in iOS Pages in a manner similar to creating and using Folders as described in Chapter 3 of the iOS User Guide found as a special bookmark in Safari. Well worth reading.
In Pages Document View (where you see thumbnails of each document) tap on a document and drag it over another document to create a folder. Additional documents can then be dragged into the folder. To remove a document in a folder, tap, hold then drag out of the folder.
There are limits: each folder can only hold 20 documents and you cannot nest folders or place a folder inside another folder.

Similar Messages

  • Can I set up folders in pages on iPad?

    how can i set uo pages folders?

    You can create folders in iOS Pages in a manner similar to creating and using Folders as described in Chapter 3 of the iOS User Guide found as a special bookmark in Safari. Well worth reading.
    In Pages Document View (where you see thumbnails of each document) tap on a document and drag it over another document to create a folder. Additional documents can then be dragged into the folder. To remove a document in a folder, tap, hold then drag out of the folder.
    There are limits: each folder can only hold 20 documents and you cannot nest folders or place a folder inside another folder.

  • Help setting up sounds effect page for ipad

    Hello,
    For the past few years I've maintained a fun webpage (made in DW) that plays sounds on click.  I use it to accent certain moments in my class and sometimes I run several sounds at once to create a mood during stories.  This year our students are using ipad's and this sound page does not work the same way.  It does not play certain sounds, and opens others (wav, mp4 on a separate page) one at a time.  Here is a sample line of code that works on Macbooks, but will not play at all on ipads.
    Here is the code:
      <embed name="CS1345392109055" src="rimshot.mp4" loop="false" autostart="false" hidden="true" width="0" height="0" enablejavascript="true"></embed>
    Found on this page:   http://gr8writers.com/soundtest2.html
    It plays on a laptop, but no sound on an ipad.
    This next sound plays, but opens up a separate page - also not what I need to happen:
    <embed name="CS1345400314623" src="creepyorgan.mp4" loop="False" autostart="False" hidden="True" width="0" height="0 enablejavascript="true"></embed>
    Found on this page:   http://gr8writers.com/soundtest2.html
    What I need to be able to do is have these sounds play on click without opening a separate window.  Thanks if you can help!

    Use an HTML5 doc type with the <audio> player tags.
    <html>
    <head>
    <meta charset="utf-8">
    <title>HTML5 Audio Demo</title>
    <!--[if lt IE 9]><script src="http://html5shiv.googlecode.com/svn/trunk/html5.js"></script><![endif]-->
    </head>
    <body>
    <p>This works in all modern browsers.
    The .ogg file type supports Mozilla and Gecko browsers.
    MP3 audio is supported by the rest.</p>
    <audio controls>
    <source src="path/yourSong.ogg" type="audio/ogg">
    <source src="path/yourSong.mp3" type="audio/mp3">
    </audio>
    </body>
    </html>
    Nancy O.

  • How I can set the spelling language in Pages for iPad?

    how I can set the spelling language in Pages for iPad? may for german...

    how I can set the spelling check to other language in Papers/iPad?
    The only choices you have in the iPad itself are to change the keyboard or change the user interface language. If that doesn't do what you want, probably best ask the people who make Papers.

  • I CAN'T OPEN A DOCUMENT IN PAGES FOR IPAD.....

    In the two years that I am using PAGES for IPAD never had a problem. I think it's a good app. But some few before one of the docs (od 3) PAGES give me a message like that CAN?= OPEN THIS DOC.=....I can't either in Word, Pdf.....Ity's very important for me cause weas taken in the Univertity .
    If anybody could help.....???
    Best rgds..
    Frank

    You have 2 versions of Pages on your Mac.
    Pages 5.2 is in your Applications folder.
    Pages '09/'08 is in your Applications/iWork folder.
    You are alternately opening the wrong versions.
    Pages '09/'08 can not open Pages 5 files and you will get the warning that you need a newer version.
    Pages 5.2 can open Pages '09 files but may damage/alter them. It can not open Pages '08 files at all.
    Older versions of Pages 5 can not open files from later versions of Pages 5.
    Once opened and saved in Pages 5 the Pages '09 files can not be opened in Pages '09.
    Anything that is saved to iCloud and opened in a newer version of Pages is also converted to Pages 5 files.
    All Pages files no matter what version and incompatibility have the same extension .pages.
    Pages 5 files are now only compatible with themselves on a very restricted set of hardware, software and Operating Systems and will not transfer correctly on any other server software than iCloud.
    Apple has removed almost 100 features from Pages 5 and added many bugs:
    http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
    Peter

  • Adjust zoom level in Pages for iPad

    When I open a new document in Pages for iPad, the zoom level is set to "fit width".  I would like to be able to zoom out and see more of the page on the screen at once.  How do I adjust the zoom level like you can do in MS Word? 
    Very specifically asking about the iPad version of the app, I'm sure this is a simple issue to address in the desktop version.
    Thank you for your help.
    Mark

    Other that rotating the iPad to portrait rather than landscape mode (portrait will show you the entire page if the keybaord is closed), not much you can do. There is no setting for this.

  • I can't connect two shapes in Pages for IPAD, why?

    I was writing a document  in Pages for IPAD and i try to make an organichart, but i can't connect two shapes (two squares) with the "connecting line", i try many times in different ways, but never work. So i decide to try to connect two shape in Keynote for IPAD and in work perfectly.
    What i'm doing wrong in Pages for IPAD?
    thanks in advance
    Juan Pablo

    I found the option that you mention!, and it works!! thank you very much!
    BUT..... i have to change it manually for each object, either when insert the object or copy/paste the object!
    is there any way to set it before I insert and object?
    thanks again
    Juan Pablo.

  • TS1702 All my documents in Pages for iPad 2 will not open.

    All my documents show the first page of the User Guide. If I clicked on any of them, they would not open, except for the User Guide itself.
    I have deleted the App and reinstalled it. All documents have gone, but i still have them on iTunes and iPhone.
    In the new app which only shows the User Guide, it will not create a new document. Also the documents have not been reinstated from iCloud.
    Help please. Would dearly like to get this sorted.

    Sounds to me like you may have an issue with the firmware, i.e. the iOS version that you are runing.  I also have an iPad 2  and sometimes have to restart it to get it to recognize and run a newly downloaded app.  And only once or twice have I had to uninstall and redownload an app that this didn't fix. I think this has more to do with the way an app has been coded more than anything else.
    You might try doing a "Reset All Settings" reset and set it up as a new iPad.  You should not lose any data, apps, music, videos, etc. that you have stored on your device.  I have done this a few times when tweaking the iOS 5.0.1 firmware and never lost anything.  You do have to re-enter your ID's and Passwords for wifi.  And of course you will need to go back into settings and reset any changes you may have made to things like location and notifications.
    I don't know if this will work, but if I was in your place this is the next step that I would take.

  • Formatting first-paragraph indent in Pages for iPad

    I've read the instructions in Pages for iPad's help, which instructs users to highlight a paragraph or paragraphs and then drag the first-line indentation symbol to the desired indent. However, I'm unable to get the first-line indent symbol to move independently of the left paragraph margin symbol. I must be missing something. Is there a source that explains these procedures in greater detail? I would also like to be able to set up a template with this paragraph indentation, but obviously need to figure out how to indent first.

    Leigh Hanlon wrote:
    James,
    Thanks for the suggestion to use a stylus. I just tried that and you're right that it *sometimes* works, maybe about 25 percent of the time in the past few minutes I've been experimenting with the technique. My problem is that I need to indent precisely for documents that will be saved as Word .docx files. I can't believe that Pages for iPad apparently relegates this important feature solely by sliding and not allowing us to open a window and set the indents numerically.
    If it's any consolation, Word for iPad seems just as bad.  :-)
    Leigh
    Since Word for iPad requires an Office 365 subscription, I would say worse .
    Honestly, it take a little practice. another option might be to start with a different template that includes paragraph indentions. A couple of the built-in templates do, and there are other savailable in the app store.

  • Automatic date update in Pages for iPad

    I want the date (date feild?) in a Pages for iPad letter template to update automatically (using the system date, like other word process application) but cannot see how to do this. This automatic date update appears to work in the Pages for iPad templates examples. i.e open a letter template and the date field shows the correct date, do the same with the same template 24 hours later and the date is shown correctly accordingly. I believe feature is achieved in the Mac version of Pages by setting up a date field. I would like to do the same with Pages iPad. Any ideas how this can be achieved? 

    We cannot speculate about future Apple products. We know no more about this than you do at this time.
    You can suggest it to Apple at Apple Feedback.

  • Pages for iPad: change a Paragraph Style ?

    Hello all,
    there is something that is driving me crazy...
    using Pages for iPad is it possible to change the default settings of a Paragraph Style ?
    I am not talking about importing a document with a custom set of styles but simply:
    - I open my document in Pages for iPad
    - I select a line of text and apply the "Header 1" style to it
    - I am not happy - for example - with the font size of the Header 1 style and I want to make all my Header 1 paragraphs change their font size
    - In the desktop version you would simply change/update the style you need, but on the iPad I cant find a way to change those values
    (BTW, I seem to remember that I once managed to do this...)
    Thanks,

    You seem to be able to copy and paste styles, but nowhere that I can find does it let you update the defined styles.
    There is the manual which does not refer to any suitable method, and also some eBooks on the subject but I have scanned those and can find no reference to redefining styles either.
    The more I play with Pages for iPad the more of a toy it seems. Sort of amazing that it does what it does on a mobile tablet, but when you get right down to it, not very useful.
    Peter

  • Spellcheck in pages on ipad - can it do multi language?

    Is it possible to get pages on ios (ipad) to do spellcheck in more than the one language (the ipad default language)? Other apps, including apple apps, seem to be able to take language from the keyboard and spellcheck accordingly, but pages doesnt seem to be that intelligent. Is there any other way to make it work? If not, is there any other app that can handle it?

    I have 3 ipads in the house, all updated, and all behave in the same way.
    I can easily change keyboard with the globe key, but the only effect it has is that when the English keyboard is in use i get english spellcheck. If i shift keyboard to another language i get no spellcheck at all (but in the mail app it follows keyboard as you describe).
    The files i try to use spell check on are created in pages on each individual ipad. I am wondering if it is linked to the fact that the language on the ipad is set to English and pages only allow for the one language?

  • HT4623 setting a pass code on the Ipad

    Several weeks ago I updated the software on my ipad2.  After completing, I needed a pass code.  I never set a pass code so therefore I had to restore the ipad.  (one major headache!).  I'd like to update the software, but I do not want to go through this again.  How do you go about setting a pass code on the Ipad.  I'm new to all of this and want to find out more about the Icloud too.

    Hi 2moreyearstoretire,
    Thanks for visiting Apple Support Communities.
    This article has some useful information about using passcodes on your iPad:
    iOS: Using passcodes
    http://support.apple.com/kb/ht4113
    Additionally, these pages are a good starting place to learn about iCloud:
    http://www.apple.com/icloud/features/
    iCloud: More Resources
    http://support.apple.com/kb/PH2568
    Best,
    Jeremy

  • How to use  font Symbol and Zapfdingbats. in Pages for iPad

    Pages for ipad has font options of Symbol and Zapf Dingbats.  I would like to use one of these fonts to place arrows in lines of text. Does anyone know how to do this? I am using IOS6 and ipad 3

    Does Pages on the iPad have an Inspector panel? In the Mac version, it's a round blue button in the icon bar at the top of the window.
    If you've got that in the iPad's Pages app, then you can use it to manually raise or lower the baseline of one or more characters, then use the font size to make them smaller. Superscripting after a numeral can be automatic (in the Mac version) by setting that in the Prefs.
    You can probably tell I don't have my iPad yet.
    Rob

  • How do I "tab" in between columns in Pages for iPad?

    As stated above, I need to know how to use a tab key in pages for Ipad. Not how to set a tab, but how to move between them. thanks

    You can only tab from field to field on the iPad with an external keyboard. Most folks use a Bluetooth keyboard, either Apple's or one of a number of 3rd party keyboards. Some folks have also successfully used a USB keyboard connected to the iPad with the USB port provided by the Apple Camera Connection Kit.

Maybe you are looking for

  • How do I use a custom UserInfo with a T3Client?

    This is related to my previous post, 4655. The problem is I if use a custom implementation of the interface weblogic.security.acl.UserInfo in a T3Client constructor, the client fails to connect. If I use weblogic.security.acl.DefaultUserInfoImpl, the

  • Ease in/out not intuitive

    Hello, I've been using animation applications for about 20 years now and, for whatever reason, Flash CS5's ease in/out feature has got me stumped. I have a simple text Movieclip that comes from the left, off stage, and moves to the right onto the sta

  • How can I get rid of the app Bird Clock?

    does anyone know how to delete/remove/trash the Bird Clock app? It is huge on my screen-doesn't shrink down..and I cannot get rid of it! when I try to throw it in the trash it says I can't because it is "open"..so how do I close it? Help! what a jist

  • Standard BAPI for creating groups in SAP

    Hi, I have a requirement to create user groups in SAP executing a BAPI from an external application. As an input parameter the group name and group description will be passed to the BAPI. I am unable to find the standard BAPI for the same. Can anyone

  • "This photo was downloaded from a photo subscription" but from my camera

    When looking in my Unnamed Faces smart folder, (Face is unnamed), I am getting the message "*This photo was downloaded from a photo subscription*" in the Info frame for several photos that were taken with my camera. I never saw this before I moved to