Set up wifi network in advance

I want to set up wifi access to a network IN ADVANCE of being at the house that the network is located (setting up a friend's iPad for when they visit their mom). I can manually enter the network name and password - but the only option appears to be "Cancel" or "Join" and since the iPad isn't "in range" yet it obviously can't connect - and there doesn't appear to be a "Save" option to get around this. So is there some other method of doing this that I'm not aware of? Or does Apple not provide that ability? Just trying to save them the steps of having to do that when the get there - they use the iPad for what they need but aren't use to going in to settings to do much. Thanks.

You can't set the networks settings up in advance. There is no way to save the information. The iPad can only join networks that it can see and that means the device must be withing range of the network.
It really couldn't be much easier to join a network. You can easily talk them through it.

Similar Messages

Just bought new time capsule- need help setting up WiFi network with another router

Here ismy situation.
I had a wireless network setup up at home using a Belkin wifi router.
I have 2 macBooks (1 pro, 1 air) and 2 iphones that connect wirelessly and a desktop PC that is hard wired to the ethernet port. In addition, I have a Verizon wireless network extender plugged in by ethernet. All of the hard-wired gear is in our 3rd floor attic office (and the wireless signal was strong throughout the house).
The Belkin wifi router was plugged into a wall ethernet jack that is in turn wired into a Linksys router in the basement (along with multiple other ethernet ports througout the house) and is hardwired to the Cable modem next to it. All of the hard-wired ethernet stuff (including the router in the basement) was there when we bought the house, and I have no clue in the tangle of wires how to sort them out (but don't really think I need to)
I just purchased a TimeCapsule to do wireless backups of my 2 macbooks, and tried to set it up alongside the existing wireless modem.
Needless to say, this did not work well. I called AppleCare, and was told that the TimeCapsule needs to be the "1st" wireless adapter, so I went into the basement, and connected the time capsule directly to the cable modem, and then out to the basement router. The Belkin router still needs to be in the attic to supply the PC and the Verizon adapter (so it is near a window for GPS signal).
If I try to name the WiFi network the same SSID on both the TC and the belkin router (to have dual signal strenth coverage) the whole thing gets messed up and the TC cannot be "found" by the aiprort Utility software.
What I have done now is that I have 2 side-by-side wireless networks with 2 unique names (actually 3, because I enabled the 5Ghz signal on the TC), but our wireless devices do not "switch" automatically from one SSID to another stronger signal SSID as we move through the house
Here's the question: How do I name them the same so that the devices will switch effortlessly to the stongest signal? I understand it involves switching the "channels" but don't know how to do it right now. Currently, everything works, so I don't want to mess it up tinkering. Another caveat- there are several other wireless networks from neighbors houses that I can "see". I jsut downloaded a program called iStumbler that shows the channels, but not sure what to do with that info.
Any advice would be appreciated.

Here's the question: How do I name them the same so that the devices will switch effortlessly to the stongest signal? I understand it involves switching the "channels" but don't know how to do it right now. Currently, everything works, so I don't want to mess it up tinkering. Another caveat- there are several other wireless networks from neighbors houses that I can "see". I jsut downloaded a program called iStumbler that shows the channels, but not sure what to do with that info.
Any advice would be appreciated.
OK.. sounds like a mess.. or at least messy and the previous people should have left a log book with all the IP address info in it.. you have far too many routers.. but from here it is impossible to tell how they are configured. Most are probably just setup as AP.
Naming rule for wireless.. Same SSID same security different channel.
SSID ie wireless name to work on the PC side should have no spaces and no special characters. TC name should also follow that rule. So the devices need to all set with fixed channels.
Don't worry too much about iStumbler and what is outside your house.. there isn't enough channels at 2.4ghz anyway. And you are going to need to use them all. There are only three non-overlapping channels. 1, 6, 11 so set each device to one of those channels. The TC should be as close as you can to where you normally use the MacBooks.. and turn on the 5ghz. You will have to leave it to automatic name so the Macbook can also roam across from 2.4 to 5ghz. But if you care to use a different name and force it onto 5ghz the speed is much better as long as you are in the same room.
Roaming is great in theory.. often in practice it just doesn't work.. you need to step in and turn off wireless and then turn it back on.. you can quickly see which router it is connecting to by hold down the option key when you click the airport fan in the top menu area.. and look at bssid.. you will have to figure out which number MAC address relates to which router.
Also do not be surprised if Lion gives you issues. It seems to often drop out and lose connection to the TC as a backup device even if internet is still working.

Unable to set my Wifi network!

I just got my my first airport extreme router last evening. I have been struggling to set it up as an extender with my existing Netgear Wi-Fi router, for which I have have had to attach it to my net gear router through ethernet cable. However, after I am able to set it up, the moment I disconnect the ethernet cable, it goes off line and the airport utility stops recognizing it.
I really do not care if I set it up as a bridge or as a new connection. The idea is to set up separate network for my Apple products and to boost the signal strength.
Please help. Thanks.

Both of these gentlemen assured me that this was the best product.
I am sure that they meant well, but unfortunately both gentlemen were wrong in their advice. It would have only taken them a few seconds to pull up the product information on the AirPort Express.
Would you by any chance have an idea if Airport Express would also not be able to serve the purpose?
The AirPort Express cannot do what you want.
A simple look at the product literature for the AirPort Express will confirm this for you:
Extend an existing Wi‑Fi network’s range.
If you already have a wireless network in your home and want to extend its range, AirPort Express can help. Just place it in range of your primary base station — an AirPort Extreme, AirPort Time Capsule, or another AirPort Express
http://www.apple.com/airport-express/

How do I set one wifi network as preferred?

We have 2 wifi modems at home as the signal is bad in some parts of the house with just one. So I have set up another as a relay. However, all of our apple iPads/iphones automatically default to the one modem we use the least. Even if there is no signal bars at all it will default to that modem and never chose the other one which it is set up for unless I manually change it every time I wake up the ipad. I have tried forgetting the network and then putting them back in in different orders. But same problem always occurs. Is there a way to set one network as the preferred first choice network without deleting the other one completely? Many thanks

system prefs>print and fax>print and you'll see a pulldown menu labelled Selected printer in print dialog. It defaults to Last Printer Used, but you can choose a specific printer if you want that for your default.

HT202639 Is there a way to set a wifi network as default?

so, i am trying to keep an airstash connected to my device, but it toggle back and fourth with another wifi signal. Is there any way to keep the airstash connected as default?

Go to Settings/Wi-Fi, tap on the other network, tap "info" and hit "Forget this network"
If you have "ask to join networks" activated as well, your device will connect automatically to those you joined before and choose not to forget.

Setting up a WiFi network from iMac... works on "old" iMac, not "new"

Hello,
I hope I'm not crazy, or even worse, stupid.
I an running two iMacs in my home office. Old one= 21" 2 Ghz PowerPC G5, purchased summer 2005 and still running like a champ. New one=27" 2.7 Ghz Intel i5. Purchased the new one July 2011. I have a cable modem plugged into the ethernet port on the old iMac. I've been accessing internet on new iMac with wifi and the internet sharing network I set up on old one. I also use wifi on my ipad and laptop. I have never had even a single dropped wifi connection on any of these devices.
I pretty much expected the same kind of result and performance when I reset the cable modem and plugged it into the new imac and took similiar steps to set up internet sharing/wifi network on new iMac. This has not been the case.
What's happening is:
The cable modem plugged to new iMac is working fine; verified with ISP. I set up wifi network on new iMac and turn on internet sharing. I locate my network name on ipad, laptop, even the old iMac, and I see the name in the list, so I figure so far so good. The signal icon appears in menu bar as usual. I open a web site to verify it's working. And it's working...for about 20 seconds. Then I get alert messages that there is no internet connection.
After creating a bunch of new networks and changing channels, changing type of security, even passwords, I realized I wasn't going to figure this out by myself. I'm not a technical person; Apple spoiled me and I stopped learning how to do anything except plug stuff in 20 years ago.
I started researching online including these discussion boards and answers have ranged from "It's the iMac! It's a hardware problem they never fixed! The aluminum case gets too hot!" to, "there's no airport card and you have to buy an external router." I gave up and called Apple, thinking surely they'd be able to give me a straight answer. Ha ha. Nope.
Of course the bottom line is I could buy applecare (haven't yet...haven't used the computer hardly and I'm still under warranty), I could buy telephone tech support, or I can take the machine to the geniuses.
I keep thinking this can't be that complicated. When I buy a new iMac--this is my 4th one--I expect things will get easier, not this complicated mess.
Oh, last I want to include I just reversed everything back to the way it was. My old iMac is connected to the cable modem and the old iMac is back to being my wifi network, sharing internet with the new imac, my ipad and laptop. Easy as pie.
I'm making an appointment with the geniuseses but hoping it's just something I'm too dumb to realize I'm doing wrong.
Thank you in advance for your patience; any help is much appreciated!

SuznK66 wrote:
It never occurred to me that the wireless network/internet sharing thing wouldn't work just as well if not better on a brand new machine with the improved technologies I pretty much expect. Metal could be interfering with the signal? The machine is aluminum!! I'm no engineer but that seems kind of...flawed. I just don't understand.
I think the WiFi antenna is near an edge of the computer to avoid being encased in metal. It should work like t did in your old computer, but as I said, the use of a Mac to share an internet signal is much less common than use of a router so even if the newer computers have a non-optimal design, it might not get widely noticed in forums like these.
Sounds like AppleCare is what you want, so I'd get it and then have them check that your Mac is transmitting thru the wireless card/antenna as strongly as it should be. The antenna clearly works as you can RECEIVE a signal, but the transmitter uses different circuitry than the receiver. By the way, I think AppleCare is a good thing to get for iMacs and for laptops as they are very compact and tend to be more prone to thermal problems than other desktop computers.
I have no idea about routers aside from, of course, the apple air port one that the phone tech support guy mentioned. Are there others that are less money and just as good? I don't feel like rewarding apple for selling me a product that doesn't do what the earlier geration machines did without a problem. Seems like they shouldn't make another $200 because of their flaw. My old iMac's wifi signal was strong enough for a 3500 square foot house, 2 laptops and an iphone.
Would getting an external router definitely solve my problem? Which one would you recommend if I go that route?
I also did not understand why the Apple routers (Airport) were so much more expensive than other brands. So I purchased a linksys n router some years ago and it has worked quite well. They are very easy to configure through an ordinary web browser (some Mac folks prefer the Airport utilities that are used to configure the Airport routers, but I find the web browser interface very easy to use for the non-Apple routers), and they are in very widespread use (linksys isn't the only brand that is good for this, there are others, but I've had good experience with both Belkin and Linksys). You can get very high performing n routers from Belkin and Linksys for under $100. I'd get a router that has dual band (2.4 GHz and 5 GHz), and I think most include standard features like MAC filtering (a security measure), WPA2 security, and I thiink offering Gigabit ethernet ports would be good also in case you connect something to it like a hard drive server or a printer or want a fast local network sometime in the future.
I think the router will solve your problem and do a better job of wirelessly distributing your internet signal, but if the problem is due to a faulty wireless card (that receives fine but doesn't transmit properly) in the new iMac, I'd want to get that fixed under warranty (or AppleCare) now rather than later.
One more thing: if your wireless card in the new iMac is working properly but the physical layout is such that the internet sharing isn't working well, you OUGHT to be able to eventually get it to work by moving the other devices you are sharing with around to different locations, as eventually one should end up in a spot that works. If nothing can receive the shared internet from the new iMac, even when 3 feet away, then something might well be wrong with the new iMac's transmitter.

Problem viewing streaming video in some wifi networks, but not others

When I am at work (university), I can not view YouTube videos or video streaming from news sites such as cnn mobile on my ipod touch 2g.
<m.cnn.com/videos.jsp?ckey-cnn)06#__1_>
When I called Apple support, they had me reset-restore. I still had the problem. I went to the Apple store Genius bar and the problem no longer existed, the videaos downloaded and played from both sites!
But at my diner and at work, I get the message, "This movie could not be played" in a popup box with an OK button. The same message appears if I use the YouTube application. I click on any video, and the same popup appears. In Cnn the popup is preceded by a shaded capital Q that looks like the blue Quicktime Q; in Youtube the pupup is preceded by a YouTube icon in gray with the "Tube" surrounded by the rounded rectangle, their icoon...
At the Apple store the popup never appeared, and the videos downloaded and played.
I have no trouble playing movies I have downloaded from iTunes.
I did not have this problem when I initially got my iPod Touch, and I think it appeared after one of the last two system upgrades, but I am not sure.
I am curious that it the problem happens at two places, my diner and at work.
The speed of my wireless work network, as judged by the ipod app speed test is 9915 kbps download and 6971 kbps upload, so plenty fast.
The first time I noticed this issue was with the application "At Bat Lite" which also won't play video highlights at work.
I do not have WiFi at home
Any thoughts about what would cause this lack of functionality apparantly only at some networks but not others?
Oh, one more piece of data: at work a Macbook will play YouTube both on ethernet and using wifi...
Thanks for any thoughts or suggestions,
Paul

It seems I have two networks available at work, one is behind our firewall, and I login to it. This is the network that I can't view streaming video. There is also a "Guest" network that I don't need to login to. This one works with the YouTube and the news site videos.
Thus, I conclude there is a setting that WiFi network administrators can invoke that specifically can block streaming video on some protocols (whatever the ipod touch uses) and not others (whatever the Macbook uses). But the same router hardware supplying the Guest network does not block these protocols. Presumably this has to do with security on one side of the firewall(?)
Anyway, apparently outside of the WiFi controls available in the ipod touch settings.
Weird...
Paul

Have timecapsule & 2 express and want an extended wifi network

Have these 3 devices but couldnt make them work, tried to set extended wifi network, first assigning timecapsule wired from fiber modem and then setting both express as extended thru wifi...but these two not working...
I ve read that express should be located to base (timecapsule in this case) and cannot link all as chain, is that correct?
How can I set a set of express devices working as wifi amplifiers ???
Thank you in advance

Apple's "extend a wireless network" feature works like the hub and spokes of a wheel.
The Time Capsule would be your 'hub". One AirPort Express would be at the end of a "spoke", since it must communicate directly to the "hub".
You could have a second (or third, or fourth) Airport Express at the end of other "spokes", but each Express must communicate directly to the "hub".
AirPort Express devices at the ends of the "spokes" cannot communicate to other AirPort Express devices at the ends of other "spokes".
Another way of saying the same thing is that although you can have multiple extenders, you can only extend the wireless signal one time, not two times. The devices can not be linked as a chain.
We assume that both of your AirPort Express devices are 802.11n models. Is that correct?
We also need to know what version of AirPort Utility that you are using in order to provide more tips. If you are not sure, open AirPort Utility, click on the AirPort Utility menu in the upper left corner of the screen, and then click About AirPort Utility. Please post back with the version number that you see there.

Need help setting up WiFi - Xfinity with Network Switch, Time Capsule, Airport Express and Apple TV

Hello - I recently got Comcast Xfinity service. We had switched from a different service. Our wifi service was never great, but prior to Xfinity, it worked decently. But now that we have Xfinity, our wifi is much worse and very unreliable. I am seeking advice on how to setup my various Apple wifi devices in my home. I have attached a diagram that illustrates what I am dealing with. We have a large old house with stone walls. Comcast does not support this issue.
To explain the attached diagram, we have a total of 4 levels in our house - an unfinished basement, 1st floor, 2nd floor, and 3rd floor. The Xfinity router is in the basement and it is connected to a NetGear 10/100 network switch. I already have ethernet cables running from the network switch in the basement to various locations throughout the house. So I have ethernet connected to my time capsule and ethernet connected to each of my 3 Airport express devices. The dark lines running from the network switch to the various devices represents ethernet cable.
The immediate problem that we are having is that we are unable to connect to our wifi networks. The networks show on my mac laptop and my iPhone, for example, but I am unable to connect. I know that I am inputting the correct password, but most of the time, we cannot get in. Sometimes we can..... Very frustrating! Also, due to the fact that I setup what I have over several years, I have multiple network names. I once tried to fix that issue, but was unable to tackle it due to my lack of understanding.
Here is what I am looking to accomplish:
1. Seamless wifi access throughout our house.
2. One name for our wifi network. Right now we have multiple names for multiple networks. Just want to simplify and have only one network. (I guess that an additional "guest network" would be ok, but not absolutely necessary.
Also, if you think I should disable the Xfinity wifi, and just rely on my mac wifi devices, I am perfectly fine with this. Just tell me how to do so.
I have no idea how where to start or how to set this up. I imagine that I would need to disconnect everything and reset and start from scratch? Can someone tell me what I should do? Even general advice would be helpful, but the more specific, the better, given my limited understanding. Any help or advice would be greatly appreciated.
Thanks in advance!

Your photo link is not working. Click on the camera icon to load an image. (Shorten the name of the file to something like WifiNetwork.jpg)
Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

How do I set up different network locations with different wifi?

I am having an issue setting up different network locations with different wifi profiles on each. I want to do this to enable fast switching of wireless networks. In my house I have two wireless networks, my own personal one and one that is created by using a wifi modem supplied by my company. If I use the company wifi network then I can get into all my work applications without having to enable VPN access separately. It is also faster. However, they also block many applications including sending email from my personal email account, dropbox, etc. So throughout the day I need to switch wireless networks back and forth.
I was looking for a faster way to switch and thought I would try network locations. Was able to set up a new network location without issue. However it seems that whatever wireless preferences, changes, or wifi network order I put into my "Work" location it carries over to my other location which is the standard "Automatic".
What I would like it to have my "Work" location only to be able to connect to my work wifi and my other network (Automatic) to just connect to my home wifi only. That way I can enable faster wifi switching and can even use my launcher program (Alfred) to provide shortcuts.
Anyway to do this?
Thanks in advance for any help or advice.

Just thought I would bump this up in the conversation. Doing a further search I came across this discussion which is similar: Connecting to a wireless network via applescript?
However, I tried to build the Automator application as discussed and cannot get it to work. Very much a novice at Applescript and Shell Script but have created customized Automator services before. All I get now is "Shell Script command encountered an error". No more detail. I copied and pasted the script as shown in the email thread. Is there any other line or command I need to place in front of it?
Thanks again for any help

Airport utility no longer recognizes my Airport Extreme Base Station, which had been set up to extend a wifi network

Hi. In November I set up my airport extreme base station (5th generation I believe) to wirelessly extend the wifi network we use at home to see if it would increase download speeds. Before doing that, I did a factory reset of my airport extreme, and the owner of the airport extreme to which the ethernet cable is attached made changes to his network to allow it to be extended. I folllowed all the directions from the apple support pages, and finally got it to work. I could even access a portable hard drive which I attached to the airport extreme base station being used as the extension. Then a week or so ago I noticed that my laptop would no longer connect to my base station. I did not have time to look into it until this week. Airport utility, either on my Mac or iphone no longer recognizes my base station. My mac is running OS X 10.10.1 and my iPhone is running iOS 8.1.2 I have tried both hard, soft and factory resets of my base station to no avail. The only thing that has changed after doing that, is that when I do a soft reset of my base station, a neighbors airport express appears when it never did before. I can't actually connect to it, but it does try. Then after approximately 5 minutes, it disappears from my list.
Today I went and pulled out my OLD AIRPORT EXTREME base station... you know, the one that looks like a space ship and is running wifi 802.1 b/c? airport utility DOES locate and display that, but airport utility returns a message stating that it cannot be set up by this software. I am attaching an image of that.
Thank you,
John
Does this have anything to do with the fact that 'Back to My Mac' is probably enabled?

I think the initial problem is that your iPhone was connected to an open network that wasn't yours.
Go to Settings > WiFi and "Forget" the network created by that AirPort Extreme, it's older than dirt. Forget your neighbor's network also.
Perform the equivalent actions with your Mac: System Preferences > Network > Wi-Fi > Advanced... Delete every network that appears, including your own.
Then, connect to your own network on all your devices, after which you ought to be able to use any of them and configure your Extreme without any difficulty. You may need to start over with a "hard reset" on both the main AirPort Extreme and the one extending its network.
Does this have anything to do with the fact that 'Back to My Mac' is probably enabled?
Not exactly, but using iCloud Keychain will populate all your devices with the names of preferred networks that any of them connect to, no matter where they are. I don't know why Apple considers that a beneficial feature.

Trying to set up my brand new MacBook Pro and it does not connect with the wifi network I have selected for this purpose. Nothing wrong with the wifi as both my iPad and iPhone are happily connected. Suggestions for connecting to the wifi network accepted

Setting up my brand new MacBook Pro and it will not connect to the wifi network. Nothing wrong with the network which is happily working for my iPhone and iPad! Suggestions accepted for making this connection.

Fixing this is a two step process:
1) System preferences > WiFi/Airport ...
... check [√] Ask to join new networks
"Known networks will be joined automatically.
If no known networks are available, you will
be asked before joining a new network."
2) Remove unwanted networks from the list of "known" networks under
System preferences > WiFi/Airport > (Advanced) > | Airport/WiFi pane ...
Close the window and save changes. If no joy, do a restart to ensure you are playing under the new rules.

HT1695 I am trying to set up my new iPad (1st time owner) and it tells me it is unable to join my home wifi network. What do I do now?

I am trying to set up my new iPad (1st time owner) and it tells me it is unable to join my home wifi network. What do I do now? This is the only wifi network I have...

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Time Capsule does not appear in iPhone 4 wifi network setting

I just set up Time Capsule on my IMac. I was able to connect to the wifi network but do not see the TC on my phone's wifi network settings. I have the Airport Utility app and I do not see my phone on the any of the Airport utility maps on the Mac or phone. I tried to set up my IPad 3 and no luck it only recognizes the wifi network and not TC.
I tried to use the demo that appears on Apple's TC info link and I do not see the same info on my phone when following the directions. I am a new IMac user my be I have a setting wrong. Please help.
http://www.apple.com/timecapsule/wireless.html

The iOS devices seem to have issues if the wireless name is AFP type..
I suggest you go back into the TC setup.. you may need to use 5.6 utility.. to get finer controls.
http://support.apple.com/kb/DL1482
Change the wireless name to short, no spaces pure alphanumeric.. I also recommend a different name for 5ghz wireless in the advanced wireless page.
Set the wireless to fixed, a/n - b/g
And then lock the wireless channel.. for 2.4ghz, set to 1, 6 or 11 in turn as the only non-overlapping channels.

How to set up TimeCapsule (4th) to create own private (wired) network behind Airport Express (5th) that is set up to join existing wifi-network of fritz adsl modem/router?

I work in an office building with free Wifi to connect to the Internet. I want to be able to use this internetconnection, but at the same time I want to shield of my own wired network.
I've made the following configuration:
- fritz adsl modem / router
- Airport Extreme (5th gen) set up to join existing wireless network (green light, works)
- Lan-cable from lan-port AE to wan-port TC (4th gen)
- Lan-cable from TC to Mac
- Lan-cable from TC to Printer
When I set my TC (network-settings) in bridge-mode everything works fine, but my Mac and Printer get an IP-address from the fritz modem / router and are visible to others.
I tried to set TC in NAT/DHCP-mode, but then I get the error message that I should set a static IP-adress for TC. When I set TC in DHCP-mode, it looses connection to the AE. I'm not sure what to do now. Does anyone know how to set up my TC and create my own private network and still be able to get on the internet?

Hajenius wrote:
Is there a better alternative? I'd rather not want to reset my TC every day.
You are using free internet.. so there is a price to pay.. that is convenience and non-ideal network setup.
The better alternative is to pay for your own connection. Then you are completely free of the possibility of others in the bullding seeing your connection. (as long as you secure the wireless).
But I think you are probably over worrying about public wifi.. if it is setup right.. ask the building admins.. it should be setup so each user cannot see another users connection. This is typical for most wifi setup and simply means you can see internet connection but nobody else on the connection. ie other wireless users.
Having a router with NAT makes it then more secure again and allows clients on your own network to interact with each other. But you can setup wireless to the free wifi for every client.. (depending on how many IP you are allowed).. and run a secondary network without internet access. This is easy for desktop etc where you have a wireless and a wired connection but less convenient for mobile devices.. unless you use a cloud connection and each client can link and share via that.
Have I made the explanation worse??
Think of it this way.. if you had 3 laptops.. all 3 could connect to the internet from the building wifi.. but they cannot talk to each other or share resources in local office. You can put resources out in the cloud, that can be shared.. but that adds traffic and most free services are not fast.
Now you can also plug all three into Time Capsule by ethernet.. and share local resources. Files, printers backup etc. This network is not connected to the internet at all. Each laptop has internet via free wifi and local connection.
For devices like iphones that have no ethernet or other method.. you could use local wireless and public wireless.. but in turns.. still the only advantage is less issues with double NAT.. if that causes problems.. then this is an alternative.

Set up wifi network in advance

Similar Messages

Maybe you are looking for