Set valuation type by storage location

Is there a way to limit specific valuation types to a storage location? We have reclaimed materials that we would like to assign to a specific storage location. For example, we have storage locations 1 through 4 for new materials and storage location 5 for reclaimed. Is there a way to restrict the receipt of reclaimed materials into storage location 5 only? We do not want to see any reclaimed materials in storage locations 1 through 4.

valuation only takes place at plant level, so you cannot restrict it at storage location level with standard customizing, you can only check this in a user exit.

Similar Messages

Re:Valuation control at Storage location

Dear Guru's,
I have below requirement :
I want to control the Valuation of a material in Storage location or at material level. i.e that particular Raw material will be non-valuated or all the materials in 1 particular storage location are non-valuated materials
I know that can be control at Plant/company code level ( Plant as valuated or not valuated )
Also is it possible to mantain same raw material code as Valuated in 1 plant & non-valuated in other company code/Plant ?
Kindly guide
Regards,
Ishwar

Hi Ishwar,
If you had mentinoed your business requirement then it would be easier for us to resolve your issue. However it wont be possible to have valuation control at Storage location.
but you can have some alternative solution.
1. Create New Material Type (say ZXX) which should have only Qty update Ticked ( Do not ticket Value update Checkbox).
2. Create Material Code of Newly Created Material Type (ZXX) . These newly created Part code will not be valuated.
Also is it possible to mantain same raw material code as Valuated in 1 plant & non-valuated in other company code/Plant ?
It is very much possible to have Same part code to be valuated in 1 plant and non-valuated in Other Plant, Provided your valuation occurs at Plant level and not the company code level.
Regards,
S Anand

Stock report in BW (valuated stock and Storage Location level)

Dear All,
            Regards.We got an situation here,
Case 1: R3 (MB5B) (Both "Storage loc" and "Valuated stock" shows the same Stock Qty)
1).The BW Stock Report shows values the Correct Values for "Receipt Qty" and "Issue Qty" with the Correct "Quantity total Stock" aswell.
Case 2 :   R3 (MB5B) (Stock is different between "Storage Loc" and "Valuated Stock")
1).The BW Stock Report shows the "Quantity Total Stock according to VALUATED STOCK Level(MB5B),but the "Receipt Qty" and "Issue Qty" according to STORAGE LOCATION Level(MB5B) .
We followed the "How to Handle Inventory "Doc with the proper sequence of Loading of Infosources and Compression.The data is sitting fine at the cube level.
It would be great if someone can throw some Light on this issue,on how the Query shows a COMBO of both Valuated stock and Storage Location stock....Held up with this issue for quite sometime..Had a look at the   Oss Note (589024)...........
Manythanks
Arun

HI,
In Inventory we have two quantity fields given to satisfy the requirement.
Valuated stock Qty - 0VALSTCKQTY
Storage Location qty - 0TOTALSTCK
You can make use of them based on your requirement. Hope this helps for you.
Thanks,
Arun

Error messages in KO88-"Not set valuation type"

It shows many messages-
"Sender：ORD MZ000610376 RME1100SC28C6T-400-LF not set valuation type for the material 1002-00176" when executing KO88.
I do not understand what this message means.Did anyone have been encounter this message before?

Hi,
what is the 5-digit error message number for the mentioned message ? For example "KOxxx" ?
Best regards,
Andreas

MB5B Movment type and storage location is reset

When I run the report MB5B with radio button "valuated Stock" active for a specific Plant and Movement Type, I get a Message "Movement Type is reset" and then the entered Movement Type disappears from the selection criteria.
However the report does not give me this message when the radio button "Storage Location/ Batch Stock" is active.
Also, When I run the report MB5B with radio button "valuated Stock" active for a specific Plant and Storage Location, I get a Message "Storage Location is reset" and then the entered Storage Location disappears from the selection criteria.
However the report does not give me this message when the radio button "Storage Location/ Batch Stock" is active.
Please tell me why does this happen when the radio button "valuated Stock" is active ?

Dear All,
I am facing the problem as said in the thread.
My two queries are as follows:
Query 1: In MB5B report When we select the valuated stock option ,We are unable to use movement type , storage location in the selection criteria nad getting the below messages.
M7284 - Storage location is reset.
M7298 - Movement type is reset .
Query 2 :In MB5B report total receipts and total issues is showing incorrect values.
Here say for example I prepared the grn, cancelled the grn and again made the grn. Here total receipts is considering in such a way that all the grn quantities are considered. and cancelled documents are considered as issues.
ie have received material = 100 Nos 01-12-2009
cancelled grn:100 Nos
Redo grn:100 Nos
Done transfer posting 415 Q = 10 nOS = 02-12-2009
Issued = 10 nos = 02-12-2009
In mB5B 01-12-2009 to 02-12-2009
We are getting Opening stock= 0 which is correct
Total receipts = 100(GRN IST TIME)+100(GR SECOND TIME) +10(TRANSFER POSTING)=210
Total issues = 100(CANCEL GRN)10(TRANSFER POSTING)10(GOODS ISSUE) =120
Closing stock = 90(CORRECT)
Here actual recipt: should be 100
actual issue should be 10
Here though the closing stock is correct , 415 transfer posting is considered as issue and receipt.Becoz of this total issues quantity report is going wrong.
Please give your valuable suggestions to the above two problems seperately.
Regards,

Stock valuation down to Storage location level

Dear all,
System setup for stock valuation is till Plant level. And understand that's how data stored in table MBEW and MBEWH until plant level only.
Eventhough that is system standrd, is that possible to get the stock valuation until Storage location level?
For eg: In MB5B, there is opening stock, closing stock and the material movement posting. I need to get opening and closing stock for each storage location.
Could you please comment if there are tables store these data? Kindly comment.

Hi Afshad Irani,
Thanks for your reply. Understand from the previous post that stock valuation for storage location can be done via table MARDH or report MC.9, but this tools are excess base on period/month basis.
My case, i need to report storage location stock for both (1)last month 06.2010 and (2)yesterday's stock 06.07.2010. So i can use MARDH table to report (1)last month stock for each storage location. While for (2) yesterday stock, table MARDH isn't help.
Could you please advice further?

Set valuation type when create or change po

In our po line item on the screen, there have a check box to mark those item as free and set the unit price as zero. Now i get a reqirement that want to set the valuation type to FOC once the checkbox is check. I would like to know can i achieve the requirement by userexit? if yes. which userexit should i use. Thanks!

check oss Note 844949
Solution as per Note :
Call transaction BUSP and generate the subscreen containers for the application objects BUPA, FICA and BUPR. To do this, set the "All screens" indicator under "Generate All Screens or Just Selected Screens".
If this does not correct the incorrect display, use transaction BUPT for the business partner or transaction CAWM for the contract account to make sure that the fields are not missing due to the field modifications. (If you cannot call these transactions, exit the SAP Easy Access menu by using /n and then call BUPT or CAWM).

Material Type Movement type and Storage location Authorization Object

Dear All,
My client wants that certain type of material i.e. SFG should not be GR Mvt. type 101 at the FG storage location, they want to restrict to some user ID .
Is there any authorization object or the enhancement to control all three parameter to restrict to particular USER ID?
Thanks in advance.
regards
ALOK Shrivastava

Hi,
        Please check as follows.
        IMG > Material Management > Inv. management and Physical Inventory > Authorization Management
               > Authorization Check for Storage Locations (Indicator on)
Regards,
    Gaito

Restriction of movement types at storage Location

Hi Gurus ,
My client requires that no user should be able to use movement type 261 and 262 from 2 out of 5 storage location of a plant .
please let me know how can we achieve this.
Regards
Abhi

Hi Abhi,
create 2 different roles
1) in the first role give him the Authorization for a Storage Location A and B, and give him all the Authorization for rest of the Mvt Types Except 261 and 262
2) In second Role Give Full Authorization for the Storage Locations C, D and E.
Use the above given Objects and fields.
NO FS and NO Approvals Required in the same.
else it will be going to be a long and complex methord using BADI and User Exit,
and in future you will always have to depend on the Programmer.
This will work for your Scenario.
Regards,
Yawar Khan
Edited by: 1234_abcd on Oct 3, 2011 1:40 PM

MB5B Valuated Stocks or Storage Location

Hi All,
When I run MB5B for Valuated Stocks it giving me stock volume which matches what MB5L states.
However, when I run it for Storage Location it is giving me a different volume.
Which is the correct transaction to based closing stock volumes off of.
Many Thanks,
Brian

Hi,
Usually it is recommended to execute MB5B for valuated stocks. you need to check the input parameters which you are passing, give a sufficient date range and check for back dated material movement postings.
Regards,

Change MRP type at storage location level

Morning,
i am having trouble with PD and ND reporting. Your you are aware ND should only have balances of 0 and PD should only have balances of >0. When i run a reportto show all PD stock and exclude the positive balances, i am getting MM numbers appearing that are 0 in 1 sLoc but have a positive stock balance in another sLoc. This becomes a problem when i change the PD to ND because it changes at plant level. i only want this to be changed at the sLoc with the 0 stock balance.
I have tried MM06 to flag the MM for deletion at sLoc level however, when running the report again, the sLoc with 0 stock balance still shows.
Also, i have about 800+ that need changing so a solution to do this in a batch would also be appreciated.
Please help.
Paul

Hi,
Go to IMG settings 'Materials Management + Consumption-Based Planning + Planning + Define Storage Location MRP per Plant' Enter your Plant, It will show list of storage location in that Plant, then select 2 in 'MRP Indicator' field for storage location for which u want to plan seperately.
Hope It will clear Your Problem
Regards
Sunil Kumar

Valuated Stocks at Storage location Level

Hi Gurus,
Our client wants to develop a report on Quantity and Value of the Stocks at Storage location level. Is there any standard table/T.code where we can see this? We have tried in the Standard reports too.
We have tried this getting from various tables like MARA,MARC,MARD,s031 & S032. But it is hitting the performance heavily. Please advice if anything can be done on this.
with regards,
Saakithyan

Refer this link
http://wiki.sdn.sap.com/wiki/display/ERPSCM/StockTablesandStockTypes
check reports: MC.9 ,S_p00_07000139 also if it fits

Restricting Authorization for movement types for Storage Location

Hi Xperts
I have a requirement that 313 & 315 material movements should not have any BBD/SLED check.However , 314 & 316 should have BBD/SLED check.
Suppose there are two storage locations : A(Good Stock) & B(Blocked Stock).
I want one User-ID should be authorized to perform 313 & 315 from A to B.However the same USER-ID should not be authorized to perform 313 & 315 from B to A.They should be authorized only to perform 314 & 316 from B to A.
All the above trasnactions will be performed either via MIGO or via MB1B.
How to achieve this.Pls suggest.
Regards,
Soumick

Hi Soumick,
You can try by creating 2 roles as given below.
Role A - Tcode Migo
BWART - 313 and 315
for object M_MSEG_LGO field LGORT - give only A
Role B - Tcode Migo
BWART - 314 and 316
for object M_MSEG_LGO field LGORT - give only B
Try assigning both the roles to user and see... Not 100% sure...but u can try out.... You need to have such scenarios tested very thoroughly.
With Regards
Nishad Showkath

How to set Valuation type in CO production Order

Hi,
I need to create a CO production Order on a material and its valuation type.
I'm using transaction KKF1,
in Settlemnt Rule the field "Valuation Type" is grey ( inactive).
Someone can suggest me how to make this field active,
so I can insert the specific valuation type.
Thank'you in advantage.
Regard's.
Kate

Does this note apply to you? 102878

Storage Location valuation level

Hello all,
We are using moving average price (MAP) at plant level valuation. We have several Storage Locations assigned to the same plant. We have several Client non-valuated goods-receipt at Storage location. That increases the quantity, but not the value. Therefore, of course those actions
changes the MAP. We are not using batches or WM module.
How can we not change the MAP without using batches? Is that possible to put a valuation level at storage location?
Can anyone help us to solve this problem?
Thank you in advance very much!
Best regards,
Pedro Grabulho.

No you do not have to change OU which is plants in your case.
1. The procedure is to activate split valaution using OMW0(zero) t-code, which is active in your case, I guess.
2. Define Global Valuation Type. You can define Storage locations here or it can be any thing else. Use T-code OMWC. (BTW, every time you add one storage location, you have to make appropriate changes here also, It is not like your storage location becomes valuation type)
3. Define Global Valuation Categories.
4. Attach Categories to OU. (OU can either be Plant or Company code, there is no 3rd option). You can atttach in one or more OU(plant)where you want it active. 3rd & 4th steps are in the same T-code OMCW.
5. Using the MM01 now extend the material to the newly created Valuation Types. (Accounting 1 view)
Thanks,
Ashish

Set valuation type by storage location

Similar Messages

Maybe you are looking for