Set value when a virtual, analog modem should answers in Server 2012 Routing and Remote Access

Hi there,
I googled for hours on the following problem:
We have a Routing and Remote Access Server with an Dialogic Diva PRI card (30 lines). The card provides an analog, virtual modem pool. All this runs on Windows Server 2012 (without R2).
My problem is that the client will be connected after 3 or 4 rings on the line (I can not hear properly with our client device), but it should be connected after the first ring.
Under Server 2000 there was the possibility to set the value "NumberOfRings" in the registry and / or  set the modem to ATS0 = 1. Both ways do not work in Server 2012.
Can anyone tell me how it works under 2012?
Thanks and regards
Andre

I assume you followed Dialogic's instructions for configuring the device on Windows Server 2012.  It would most likely make more sense to contact Dialogic if you are having issues.  They support the product.  If it is not working according
to their configuration instructions, they are in the best position to be able to answer your questions.
. : | : . : | : . tim

Similar Messages

  • Error 1053 when starting the Routing And Remote Access service

    Hi all,
    When I tried to start the "Routing And Remote Access" service on Windows 8.1 I got an error message as follow.
    Could some one help me please.
    Than's.

    Hi MRAB,
    Please check if all dependences are enabled first.
    Then set the start type to Automatic.
    Does this issue still occur after a restart?
    Alex Zhao
    TechNet Community Support

  • I have set up a Netgear dual band modem which works well with the iPhone and an older MacBook, but with this brand new MacBook it asks for a password every time I reopen the computer and open safari. Is it Lion?

    I have set up a Netgear dual band modem which works well with the iPhone and an older MacBook, but with this brand new MacBook it asks for a password every time I reopen the computer and open safari. As you can imagine this is very annoying. It says I am not connected to the internet and offers me a choice of nearby networks including mine and then asks for a password when I select it. Why does it do this with our new MacBooks (also with my son's brand new one) and not with the iPhone, iPad and older MacBook? They happily automatically connect to our network after entering the password just the once.

    Sig, I appreciate you trying to be helpful. I have no idea what issues you were having or what issue exactly pgrounds has been having. Your assumption that everyone's set up is the same as yours is false however. There are many many documented WiFi issues that are a result of Lion installs. Many have been solved by 10.7.1 and 10.7.2. Others have been solved by a large variety of work arounds. Others have not had their issues solved yet.
    I am one of those. I have an IT background, and I spent the better of five hours digging up workarounds and attempting all of them. For the benefit oh anyone who is having similar issues, I have posted links to all of those workarounds here. None of them worked in my case, but hopefully they will help pgrounds or others.
    So, once again, if you have a new idea, I'd love to here it. But if it has already been posted in one of these links, it's not helpful, let it go.
    http://osxdaily.com/2011/07/22/wifi-dropping-in-os-x-lion-fixes/
    http://osxdaily.com/2011/11/06/lion-wi-fi-problems-solution-mac/
    http://blog.chron.com/techblog/2011/09/want-to-really-repair-permissions-on-your -mac-try-this/

  • HT1711 i wanted to buy music from itune, but when i log in, it said i should answer my email test question, and i have already forgoting it. please what can i do?

    i wanted to buy music from itune, but when i log in, it said i should answer my email test question, and i have already forgoting it. please what can i do?

    If you've forgotten the answers to your security questions and you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then you can try going to https://appleid.apple.com/ and click 'Manage your Apple ID' on the right-hand side of that page and log into your account. Then click on 'Password and Security' on the left-hand side of that page and on the right-hand side you might see an option to send security question reset info to your rescue email address.
    If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then see if this user tip helps : https://discussions.apple.com/docs/DOC-4551
    e.g. you can try contacting iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Account Management , and then try Apple ID Account Security
    or try ringing Apple in your country and ask to talk to the Accounts Security Team : http://support.apple.com/kb/HE57

  • When I open Thunderbird it always ask mail server password required and than several times i have to enter password. I have 30 emails.

    When I open Thunderbird it always ask mail server password required and than several times i have to enter password. I have 30 emails. They select email randomly.

    Hey there Sharon47.
    Couple of things that I see when I read this.
    1 - If you have tried to reset your password (and it says that mail has been sent) my guess is that your spam or junk folder may have it on Gmail? That's assuming your old email account (earthlink) is still forwarding to your new (Gmail) account.
    2 - Make sure your Firefox versions are up to date on the devices.
    Also,
    Here's a couple of support articles which may help you with syncing and
    https://support.mozilla.org/en-US/kb/how-to-update-to-the-new-firefox-sync
    https://support.mozilla.org/en-US/kb/ive-lost-my-firefox-sync-account-information
    Hope this helps!

  • Which are the setting values for the Virtual CTI Driver? (Siebel Communica)

    hi everybody,
    the application I'm using is Siebel Communications 8.1.
    I am learning about integration processes with the Siebel Communications Server Administration Guide. One of the points or topics there is the use of the Virtual CTI to integrate your Siebel Business Applications with Oracle Contact Center Anywhere (as in the bookshelf described).
    I've read, with this driver agents can access communications functionality using the communications toolbar.
    The Virtual CTI is a driver provided by Oracle. You can't see it listed on the Administration -> Communications ----> Communications Drivers and Profiles. So I guess it is important to add this driver to the list.
    I have questions about that:
    1. Should I add this driver to the list? or when can I do that?
    2. Which are the setting values for the mentioned driver?
    - Communications Channel?
    - Inbound Yes
    - Outbound Yes
    - Interactive
    - Channel string
    - Library name
    Could anybody help me? I would appreciate that.
    Regards

    Thanks for the reply KT.
    I am not sure how to set a new custom style, but will look it up. If you have a url that points to the topic I would appreciate it.
    Thanks,
    Rhek

  • Virtual RAID Array Migration to Windows Server 2012 R2 Disk offline, Degraded, Detached and split

    My Residential server is used as a file and web server, however i also use it for learning so it has grown slow over the last couple of years, i now need to get it working ready for when i go to UNI. I have upgraded from windows server 2012 Standard to windows
    server 2012r2 standard, i am on the same server, but have put a SSD as my primary drive(so i still have the old hard drive and can go back to that to get my data)
     I have also done a BIOS update, so the logical disks (a 2TB RAID 1 with all my important documents) are not showing up on the RAID Configuration in the BIOS.
    By changing settings i have managed to get the array to show up on server manager > File and storage services>Volumes>Storage Pools. however there are a number of exclamation marks shown next to the drive(s) 
    I read in a Technet
    Article that i should "set
    the storage pool to read-write " 
     I did this and then in the storage pool box at the top the exclamation mark says "Warning: Degraded".
     In the Virtual Disks box (bottom left) the exclamation mark says "Unknown: Detached" and in the Physical Disks box (bottom right) it says "Warning Split" on the second disk. 
    I have disconnected all other Hard drives, however if i can't get my documents back will have to go back to windows server 2012. Any ideas would be greatly appreciated.
    Michael Booth

    Hi,
    It seems that the second disk is failed, you need to add a new disk to the storage pool to replace the failed disk.
    Degraded Storage Spaces Storage Pool after single HDD failure
    http://social.technet.microsoft.com/Forums/en-US/3a7e2a7d-4ad7-48cc-8165-0d6673e37436/degraded-storage-spaces-storage-pool-after-single-hdd-failure?forum=winserveressentials
    Regards,
    Mandy
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • When is or will there be a SQL Server 2012 R1 SP2 release date?

    SQL Server 2012 SP 1 was released over a year ago on 11/8/2012. When is the next service pack going to be available?  I see announcements for SQL Server 2014 CTP's, but what about fixing 2012?
    SQL Server is now up to CU5. I had a small hand in CU5 after reporting issues with CU4.  One of the fixes found in CU4 broke SSRS multi-value reports, oddly enough.  CU5 continues to have 'unexpected errors' but SSRS is
    fixed.  Where CU's clearly stated to have limited testing and no guarantee to work in all environments, it is essential these cummulative updates are packaged in a hardened Service Pack.
    Is there no SP2 release date in sight?

    Hello,
    I have never seen Microsoft releasing a service pack of SQL Server on January. I think you should
    expect the next SQL Server 2012 service pack between February and April.
    Customers should expect SQL Server service packs every 12-15 months except for the first service
    pack of each new version. The first service pack of each new version comes usually 9 months after RTM has been released.
    Hope this helps.
    Regards,
    Alberto Morillo
    SQLCoffee.com

  • Problems PXE booting Gen 2 Virtual Machines after Upgrading to Windows Server 2012 R2

    My Current Setup: 
    I have two virtual machines set up with Hyper V on my Windows Server 2012 Server.
    VM1: Configured to boot from an ISO file and runs Clonezilla server. 
    VM2: Configured to PXE boot using a legacy network adapter, and with a passthrough 250Gb hard disk. 
    These two VMs are connected to an external Virtual Switch, which allows physical machines to PXE boot to the Clonezilla server. 
    For the past few months I have been using this setup for two purposes:
    1. To clone physical machines to the Clonezilla virtual server (as a backup).
    2. To restore those image to the second VM if I find that need to get access to the files on the original image.. 
    This has worked perfectly, except for the fact that the speed of the legacy network adapter on the second VM (which is required to PXE boot) is very slow. But I know this is because of the limitations in how the legacy adapter works... 
    Now my problem:
    I found out that Gen 2 VMs allow you to PXE boot without having use a legacy network adapter, allowing me to image back to the VM faster. So I upgraded the Server to Server 2012 R2 . I then created the same two virtual machines on the R2 server. I can still
    PXE boot the Gen 1 VM to the Clonezilla Server but I cannot get the Gen 2 VMs to PXE boot properly. They get an IP address from the Clonezilla Server but then just stop with the following screen. (note: I have disabled the Secure Boot). 
    Are Gen 2 VMs unable to pull down images from anything other than a WDS Server? 

    Hi J,
    >>Unfortunately WDS is not a solution for us as it is dependent on the PC being part of a domain
    If you would like to make the client not join to the domain, please check the box before “Do not join the client to a domain after an installation.”  In addition, make sure not to set the client to the domain in the unattend file and do not prestage
    the computer in AD. "
    It is quoted from following thread :
    https://social.technet.microsoft.com/Forums/windowsserver/en-US/1026c3a9-0a10-4a58-a48f-5391659a96c8/wds-set-unattend-file-for-workgroup?forum=winserversetup
    Best Regards
    Elton Ji
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Error rsItemNotFound when using ReportingService2010 endpoint in SharePoint Mode (SQL Server 2012 & SP2013)

    Hi all,
    I installed SQL Server 2012 in SharePoint Mode, with SharePoint 2013 on a Windows Server 2012 virtual machine. The issue occurs when I try to use the ListChildren operation of the ReportService2010 endpoint.
    It manages to connect to the server, but it refuses to list any children. Here's the code I'm using:
    using System;
    using System.Net;
    internal class Test
    public static void Main()
    var rs = new ReportingService2010
    Credentials = new NetworkCredential("username", "password", "machine")
    CatalogItem[] items = null;
    // Retrieve a list of all items from the report server database.
    try
    items = rs.ListChildren("/", true);
    catch (Exception e)
    Console.WriteLine(e.Message);
    When executed, this code throws an exception (which is caught and displayed) : "The item '/' cannot be found. (rsItemNotFound)"
    The same code works (i.e. does not throw any exception and the items variable contains some CatalogItem) when used against a SQL Server 2012 configured in native mode.
    I'm not sure what I'm doing wrong here, maybe the first parameter shouldn't be "/" but something else?
    Thanks for your help
    Aotio

    +1
    I'm getting this error as well.  My test software is connecting to two different servers; one is running on SharePoint 2010 and I have no problems using the ReportingService2010 functions on that, but I am getting this same error when trying to connect
    to a service on SharePoint 2013.

  • SQL Server 2012: Import and Export Wizard - Exporting Multiple Result Sets at Once?

    I'm working in SQL Server 2012 trying to export some data from our database into an Excel file. My SQL statement has two separate Select statements. They are not joined by a union. When I Execute them inside of SQL Server Management Studio, with Results
    set to go to a Grid, I get two result sets back. Two full tables of data.
    However, when I use the Import and Export Wizard, the Excel sheet only has the first set of data.
    What do I need to do to have it so both result sets show up in the excel file?

    Why cant use merge them using union/union all if intention is to get them to same sheet? Is it like the metadata is different so that they cant be merged to single sheet?
    If that being the case you need to do it in two steps. 
    Please Mark This As Answer if it solved your issue
    Please Vote This As Helpful if it helps to solve your issue
    Visakh
    My Wiki User Page
    My MSDN Page
    My Personal Blog
    My Facebook Page

  • Getting error 'proc_createNewAppSiteDomainIds' when I try to install SharePoint on Windows Server 2012

    I have a Windows Server 2012 setup with SQL 2012 SP1 installed.  I have tried to install Sharepoint Foundation 2013 and also full blown Sharepoint version...but during the wizard setup I always get 'Cannot find the object 'proc_createNewAppSiteDomainIds',
    because it does not exist or you do not have permission.
    The install created my db in sql 'team1p-vm' but that is it.
    What am I missing?
    During the install I have tried both Complete and Stand-alone as the Server Type.
    When it gets to the product configuration wizard I use:
    Create a new server farm
    I enter my database server name: team1p-vm
    Database name: SharePoint_Config
    I enter my db access account
    I enter a farm security settings passphrase
    I use 17012 as my port number, select NTLM
    I see my configuration settings...
    Click Next and I get the error on task 3 of 10.
    here is the dump of the application Log: At least some of it.
    An exception of type System.Data.SqlClient.SqlException was thrown.  Additional exception information: Cannot find the object 'proc_createNewAppSiteDomainIds', because it does not exist or you do not have permission.
    System.Data.SqlClient.SqlException (0x80131904): Cannot find the object 'proc_createNewAppSiteDomainIds', because it does not exist or you do not have permission.

    Can you see if there is anything in the SQL ERRORLOG on the SQL Server that may help at the time you see this error?
    Does your user account (the user you're installing SharePoint with) have the sysadmin fixed role in SQL Server?
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Task Sequence Windows Server 2012 format and partition issue when using MDT2012

    Hi all,
    Currently I'm working on a task sequence to deploy a Windows Server 2012 image. We've integrated MDT2012 Update 1 in SCCM2012 SP1 and created a default 'Server Task Sequence'. This task sequence deploys the install.wim to a server which has multiple disks
    attached.
    We've configured multiple format and partition disk steps to create the following partition layout:
    Disk 0: 499MB BDEDrive (do not assign drive letter) + 40GB OSDisk
    Disk 1: 40GB Programs
    Disk 2: 40GB Data
    Disk 3: 25GB User
    When the task sequence is finished I've noticed the drive letters assigned to the disk are not correct. In some cases the BDEdrive gets drive letter D assigned, sometimes drive letters are assigned starting with E, thus skipping drive
    letter D. 
    The smsts.log files show an error when it's re-assigning drive letters after booting into Windows. Looks like an error in the DiskPartScript.txt.
    <![LOG[==============================[ OSDSetupHook.exe ]==============================]LOG]!><time="16:59:40.889-120" date="05-10-2013" component="OSDSetupHook" context="" type="1" thread="776"
    file="osdsetuphook.cpp:186">
    <![LOG[Executing task sequence]LOG]!><time="16:59:40.905-120" date="05-10-2013" component="OSDSetupHook" context="" type="1" thread="776" file="osdsetuphook.cpp:279">
    <![LOG[Loading the Task Sequencing Environment from "C:\_SMSTaskSequence\TSEnv.dat".]LOG]!><time="16:59:40.920-120" date="05-10-2013" component="OSDSetupHook" context="" type="1" thread="776"
    file="basesetuphook.cpp:366">
    <![LOG[Environment scope successfully created: Global\{51A016B6-F0DE-4752-B97C-54E6F386A912}]LOG]!><time="16:59:40.936-120" date="05-10-2013" component="OSDSetupHook" context="" type="1" thread="776"
    file="environmentscope.cpp:659">
    <![LOG[Environment scope successfully created: Global\{BA3A3900-CA6D-4ac1-8C28-5073AFC22B03}]LOG]!><time="16:59:40.936-120" date="05-10-2013" component="OSDSetupHook" context="" type="1" thread="776"
    file="environmentscope.cpp:659">
    <![LOG[Debug shell is enabled]LOG]!><time="16:59:43.806-120" date="05-10-2013" component="OSDSetupHook" context="" type="1" thread="776" file="basesetuphook.cpp:1440">
    <![LOG[Successfully enabled debug command shell support.]LOG]!><time="16:59:43.884-120" date="05-10-2013" component="OSDSetupHook" context="" type="1" thread="776" file="debugwindow.cpp:156">
    <![LOG[Configuring local administrator account]LOG]!><time="16:59:43.884-120" date="05-10-2013" component="OSDSetupHook" context="" type="1" thread="776" file="basesetuphook.cpp:1462">
    <![LOG[Re-assign all drive letters...]LOG]!><time="16:59:43.884-120" date="05-10-2013" component="OSDSetupHook" context="" type="1" thread="776" file="diskutils.cpp:1941">
    <![LOG[Executing command line: "C:\WINDOWS\system32\diskpart.exe" /s "C:\WINDOWS\TEMP\DiskPartScript.txt"]LOG]!><time="16:59:43.900-120" date="05-10-2013" component="OSDSetupHook" context=""
    type="1" thread="776" file="commandline.cpp:827">
    <![LOG[Process completed with exit code 2147942487]LOG]!><time="16:59:50.249-120" date="05-10-2013" component="OSDSetupHook" context="" type="1" thread="776" file="commandline.cpp:1123">
    <![LOG[Diskpart.exe STDOUT:
    Microsoft DiskPart version 6.1.7601
    Copyright (C) 1999-2008 Microsoft Corporation.
    On computer: SRV03
    Volume 1 is the selected volume.
    DiskPart successfully removed the drive letter or mount point.
    The volume you selected is not valid or does not exist.
    There is no volume selected.
    ]LOG]!><time="16:59:50.249-120" date="05-10-2013" component="OSDSetupHook" context="" type="3" thread="776" file="diskutils.cpp:1807">
    When I take a look at the generated diskpart_script.log file the volume D gets selected twice, which fails the second time because of the first remove drive letter command.
    This is the output in the diskpart_script.log file:
    select volume D
    remove letter=D
    select volume D
    remove letter=D
    select volume E
    remove letter=E
    select volume F
    remove letter=F
    select volume H
    remove letter=H
    select disk 0
    select partition 1
    assign
    select disk 1
    select partition 1
    assign
    select disk 2
    select partition 1
    assign
    select disk 3
    select partition 1
    assign
    It seems this error is caused by the first 'Format and Partition Disk' step before the 'Use Toolkit Package' step which is part of the default Server Task sequence. When I disable this Format and Partition step and create the partition manually
    all looks ok showing no errors in the smsts.log file.
    I've solved this by replacing the first 'Format and Partition Disk' step by an Powershell command which formats and partitions the disk. 
    Anyone seen this behavior?

    I have a similar problem when I install windows on some clients. Have you found any explanation for the behavior?

  • Licensing help needed for datacenter server with vm running windows server 2012 essentials and ten virtual desktops for remote access

    NPO wants to get windows server 2012 r2 datacenter as the main operating system and then windows server 2012 r2 essentials plus 10 windows 8.1 as virtual desktops.  Each desktop for one remote user running office 2013.  Is there a better configuration?
     In either case what licenses does the NPO need to purchase?
    Bob

    Hi,
    For license related questions we recommend you contact Microsoft licensing specialist.
    http://support.microsoft.com/kb/141850/en-us
    Regards.
    Vivian Wang

  • Set up a smart card for user logon to windows server 2012 R2

    Good Evening,
    I have Windows Server 2012 R2 Datacenter edition (dreamspark license)
    Is it possible to successfully set up smart card logon to a server ? I already have the smart card reader, smart card and the certificate (which is also my digital signature) I know how to setup a DC role (as far as I know, the server has to be in a domain
    to use smart card logon) I would like to logon using to my PC using a smart card and set the certificate I already have to use as a certificate for logon.
    Kind Regards,
    Tomasz

    It would take a few things to do this, and could cause some security issues. In short, I assume the certificate you "already have" came from another environment or a commercial provider. You would need to configure your computer to trust that CA
    to be an issuer of smart card authentication certificates. That effectively moves a good portion of your computer security control out of your environment. For many environments that is an unacceptable security risk.
    If you dont have an Active Directory running, you will also need to make some accommodations to the standard guides. I dont believe there are any published guides on how to do this with a single server and third-party CAs. 
    Here are some references for generic smart card authentications. They are not 100% applicable to your need, so some interpretation is going to be needed.
    http://msdn.microsoft.com/en-us/library/windows/desktop/aa380142(v=vs.85).aspx
    http://msdn.microsoft.com/en-us/library/windows/desktop/aa380142(v=vs.85).aspx
    Mark B. Cooper, President and Founder of PKI Solutions Inc., former Microsoft Senior Engineer and subject matter expert for Microsoft Active Directory Certificate Services (ADCS). Known as “The PKI Guy” at Microsoft for 10 years.

Maybe you are looking for