Set variables leads to dump error in SEM 4.0
Hi,
I am on SEM 4.0 system.In BPS, i am not able to use set variables feature.whenever i hit this button the system does the process for couple of minutes and finally gives a dump error.
I applied this note 806362.No success.
Any one to my rescue?
ravi,
the variable is of type user-defined values and input allowed by user.
"If the replacment type is user speficic values, then you can go to BPS0 - area - variable and set the values here also".- How i would do it here? Inorder to set the variable with a value i will choose SET VARIABLES option.
Whenever i choose this the system creates a dump.
Message was edited by:
ragav
Similar Messages
-
Hi,
am working in dev system.For any application if i select set variables button the system takes long time and finally give me dump error.any idea why this happens?
saggiWhat is the replacement type of this variable? Also, sometimes, if you log out after defining the variables , it works.
Ravi Thothadri -
What is the purpose of short dump error report generated by the system? What r the major parts/section of this report?
hi please look through this:
Whenever any transaction or any process is executed it hits an ABAP code.
If there is any issue in executing the code the situation is called "ABAP DUMP" or 'Short Dump'
Transaction ST22 is used to check any ABAP Dump within a given duration.
U can also fix the issue with the help of ABAP editor (Transaction Code SE38) if u r good with ABAP.
you can select back to the last 14 days if you are
running the SAP_REORG_ABAPDUMPS job (program RSSNAPDL) which deletes te
old ABAP dumps every day, possibly further if you run it weekly or
monthly.
sap-basis sap-basisAll Groups Ignore this text box. It is used to detect spammers.If you enter anything into this text box, no search results will be displayed.
SAP Groups > Technical-functional > sap-basis > Message
About This Group | Invite peers to join this group
<< Prev thread < Prev msg Next msg > Next thread >>
short dump----urgent
Reply from Keith Lewis on 5/2/2003 3:22:00 AM
Good explanation Joy, but it is not only limited to the current day and
yesterday. If you click on the Selection button you can select previous
days as well. In fact you can select back to the last 14 days if you are
running the SAP_REORG_ABAPDUMPS job (program RSSNAPDL) which deletes te
old ABAP dumps every day, possibly further if you run it weekly or
monthly.
Cheers
Keith
SAP R/3 Support Specialist
Information Services International
Tel +44 1664 41 6178 Mobile +44 7887 627818
E-mail email@removed
Archive Page - http://www.ittoolbox.com//I/sap-r3-basis.asp
Dear sreenivas
If you receive an error message in the R/3 System log (SM21), or if you
see
a terminated update in the update service analysis transaction (SM13), or
DB
realated error ,check for dumps using the dump analysis transaction
(transaction ST22), or choose Tools -> Administration -> Monitoring ->
Dump
analysis.
Transaction ST22 enables you to analyze short dumps from the current and
previous day.
The dump analysis function shows you:
What happened
What you can do
How to correct the error
The dump analysis function also provides an error ID and keywords that you
can use to search in SAPNet, as well as information about:
The system environment
Users and transactions
Transaction ST22 enables you to analyze the following data:
Date, time, user, client
Contents of system and data fields
Contents of internal tables and application tables
ST22 is a very nice feature in SAP. This is where all the system errors
and users mistakes showed up. If there is a problem that you cannot
solve and you contact SAP support, they look at this area to analyze it.
This gives us lead where to handle the problems.
Error analysis
How to correct the error
System environment
User, transaction...
Information on where termination occurred
Contents of system fields
Chosen variables
Active calls / events
Internal notes
Active calls in SAP kernel
List of ABAP programs affected
List of internal tables
Directory of application tables (contents)
Directory of data areas (administration information)
Directory of data areas (contents)
ABAP control blocks CONT
End of runtime analysis
i think this would be helpful
regards
sravani -
Dump error while creating Invoicing document
Moderator note - this is the same problem as identified in thread Error is generated in Print workbench function ISU_INV_BILL_PREPARE. Thread locked and poster notified of rules violation.
Hi Experts,
I am new to ISU application.Please provide solution for below mentioned dump error.
The error is generated in Print workbench function ISU_INV_BILL_PREPARE which is called from application form IS_U_BILL (/1PWB/SAPL20020100218092657) when I'm trying to generate invoice for the bill in EASIBI.
Error analysis
Short text of error message:
Unexpected ELSE case: field sy-subrc with value 0 (/1PWB/200201002180926
57 )
Long text of error message:
Something has occurred in a CASE or IF construct which the
developer did not expect, or which is not permissible here.
System Response
Procedure
Note the field name and field value from the message as well as the
data pattern which lead to the error. Create a problem message.
Technical information about the message:
Message class....... "E9"
Number.............. 898
Variable 1.......... "sy-subrc"
Variable 2.......... 0
Variable 3.......... "/1PWB/20020100218092657"
| Variable 4.......... " "
Thanks in Advance.
Vaseem
Edited by: William Eastman on Mar 9, 2010 2:34 PM
Edited by: William Eastman on Mar 9, 2010 2:36 PMHi Experts,
Please reply..... It's very important.
Thanks
Vaseem
Moderator note: DO NOT beg for answers, or suggest that you need an immediate reply. Read the rules of engagement here Research Resources and Rules of Engagement
Edited by: William Eastman on Mar 9, 2010 2:24 PM -
Dump error after calling a global class from se24
this is the small code i did so far.
parameters: X type i,
Y type i.
data: Z type i.
data: con1 type ref to ZTEST1.
CALL METHOD con1->zm1
EXPORTING
a = x
b = y
IMPORTING
c = z.
write:/ z.
after executing iam getting a dump error-
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
caught and
therefore caused a runtime error.
The reason for the exception is:
You attempted to use a 'NULL' object reference (points to 'nothing')
access a component (variable: "CON1").
An object reference must point to an object (an instance of a class)
before it can be used to access components.
Either the reference was never set or it was set to 'NULL' using the
CLEAR statement.Hi, Could you please tell me how to solve this issue?
-
BADI MB_DOCUMENT_BADI dump error
Hi all,
am using BADI : MB_DOCUMENT_BADI,method MB_DOCUMENT_BEFORE_UPDATE,to have checks in MB1A(Goods Issue transaction).I have written a code to check some values,after checking and raising an error message if I press enter the following dump error is coming:
Error analysis
Short text of error message:
Internal error: Multiple call of update function module
Long text of error message:
Diagnosis
In the FORM routine Buchen_Ausfuehren (program SAPMM07M), an error
message was issued by a Business Add-In (BAdI) or function module.
This is not permitted, because it could lead to data
inconsistencies. For this reason, the update of the material
document was also terminated with a termination message (dump).
Note that this message (M7 372) is not the responsible error
message.
System Response
Procedure
Contact your system administrator.
Procedure for System Administration
If there is an active implementation of the Business Add-In
MB_DOCUMENT_BADI, check that no error message is issued in the
MB_DOCUMENT_BEFORE_UPDATE method.
Technical information about the message:
Message class....... "M7"
Number.............. 372
Variable 1.......... " "
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
Hope am clear in my questian,
Thanks & Regards,
Rock.Hi,
This BADI is called in update task.
So as a result when you call your error message, SAP is retuning it as message type 'X" and an update termination occurs.
I was facing a similar problem becuase i was trying to update measurment doc via this badi.
Incase the measuring document was locked by some user my FM used to throw an error message and that would lead to a message type 'X' in this badi.
So if you want to do some validations only; please use the following BADI.
MB_MIGO_ITEM_BADI in the method ITEM_MODIFY.
Regards,
Ankur Parab -
Hi All,
DB:11.2.0.3.0
OS: Sun Solaris SPARC 64 bits
I am facing an issue - RMAN backup restore leads to the error "ORA-00600: internal error code, arguments: , , " on DB startup. Restored from RMAN backup DB test2 to DB test1.
<p mcekeep="true"> $ sqlplus / as sysdba
<p mcekeep="true"> SQL*Plus: Release 11.2.0.3.0 Production on Sun Oct 6 09:31:28 2013
<p mcekeep="true"> Copyright (c) 1982, 2011, Oracle. All rights reserved.
<p mcekeep="true"> Connected to an idle instance.
<p mcekeep="true">
SQL> startup
ORACLE instance started.
Total System Global Area 4277059584 bytes
Fixed Size 2166160 bytes
Variable Size 1493176944 bytes
Database Buffers 2768240640 bytes
Redo Buffers 13475840 bytes
ORA-00600: internal error code, arguments: , , ,
SQL> exit
DB test2 database validated:
RMAN> validate Database;
No issues reported.
Could anyone please let me the what's the cause of this error
Thanks for your time
Regards,
user10088255HI,
CASE : I
C:\>set ORACLE_SID=xxxx
C:\>sqlplus sys/XXXXX@rosen as sysdba
SQL*Plus: Release 11.2.0.1.0 Production on Sat Jan 29 12:28:00 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup
ORACLE instance started.
Total System Global Area 3423965184 bytes
Fixed Size 2180544 bytes
Variable Size 2080377408 bytes
Database Buffers 1325400064 bytes
Redo Buffers 16007168 bytes
ORA-00600: internal error code, arguments: [kccsbck_first], [1], [3978145973],
Solution: AFTER GETTING ORA-00600, SHUT THE DATABASE AND STARTUP IT INTO MOUNT STAGE AND THEN ALTER DATABASE TO OPEN STAGE .
SQL> shut immediate
ORA-01507: database not mounted
ORACLE instance shut down.
SQL> startup mount
ORACLE instance started.
Total System Global Area 3423965184 bytes
Fixed Size 2180544 bytes
Variable Size 2080377408 bytes
Database Buffers 1325400064 bytes
Redo Buffers 16007168 bytes
Database mounted.
SQL> alter database open;
Database altered.
SQL> select name,open_mode from v$database;
NAME OPEN_MODE
ROSEN READ WRITE
CASE :: II
C:\>sqlplus sys/XXXX@royalton as sysdba
SQL*Plus: Release 11.2.0.1.0 Production on Sat Jan 29 12:37:37 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup
ORACLE instance started.
Total System Global Area 3423965184 bytes
Fixed Size 2180544 bytes
Variable Size 1979714112 bytes
Database Buffers 1426063360 bytes
Redo Buffers 16007168 bytes
ORA-00600: internal error code, arguments: [kccsbck_first], [1], [73515151],[], [], [], [], [], [], [], [], []
Solution : As in above case, I have started the database in mount and then alter it to the open mode but it doesnot work out. After some analysis ,troubleshooting and googling, we have decided to flush the shared pool component of the SGA . So, we have started the database in mount stage and then flush the shared pool and further alter it to open stage . Below are the steps performed to solve this issue .
SQL> shut immediate
ORA-01507: database not mounted
ORACLE instance shut down.
C:\>set ORACLE_SID= royalton
C:\>sqlplus sys/xxxxxxxx@royalton as sysdba
SQL*Plus: Release 11.2.0.1.0 Production on Sat Jan 29 12:28:00 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup mount
ORACLE instance started.
Total System Global Area 3423965184 bytes
Fixed Size 2180544 bytes
Variable Size 2080377408 bytes
Database Buffers 1325400064 bytes
Redo Buffers 16007168 bytes
Database mounted.
SQL> alter system flush shared_pool;
SQL> alter database open
Database altered.
SQL> select name,open_mode from v$database;
NAME OPEN_MODE
ROYALTON READ WRITE
Conclusion : Though this is not the solution but a workaround to solve ORA-00600 which is having same argument as above, then you may follow the above steps.
Please chek this link : One Can Succeed at Almost Anything For Which He Has Enthusiasm...: ORA-00600: internal error code, arguments: [kccsbck_f… -
Page leads to proxy error sometimes or taking too much time to load
Hi All,
APEX4.0
Web server: Apache 1.3.9 (Oracle 9iAS 10.0.1.2.2)
I am getting the below error at first time when I try to open a page or the page takes 3 to 5 mins to load. From second time on wards, It takes 5 to 8 sec to open as normal. I debugged the page and checked the log. Logs and execution time are looking normal. why the page takes too much time to load at first time or it leads to proxy error?? Is anybody got same experience before??
Proxy Error
The proxy server received an invalid response from an upstream server.
The proxy server could not handle the request GET/pls/apex/f.
Reason : Document contains no data
Please guide me to find out and resolve this issue....
Thanks in Advance
LakshmiHi this is what the solution given by your link
A.1.6 Connection Timeouts Through a Stateful Firewall Affect System Performance
Problem
To improve performance the mod_oc4j component in each Oracle HTTP Server process maintains open TCP connections to the AJP port within each OC4J instance it sends requests to.
In situations where a firewall exists between OHS and OC4J, packages sent via AJP are rejected if the connections can be idle for periods in excess of the inactivity timeout of stateful firewalls.
However, the AJP socket is not closed; as long as the socket remains open, the worker thread is tied to it and is never returned to the thread pool. OC4J will continue to create more threads, and will eventually exhaust system resources.
Solution
The OHS TCP connection must be kept "alive" to avoid firewall timeout issues. This can be accomplished using a combination of OC4J configuration parameters and Apache runtime properties.
Set the following parameters in the httpd.conf or mod_oc4j.conf configuration files. Note that the value of Oc4jConnTimeout sets the length of inactivity, in seconds, before the session is considered inactive.
Oc4jUserKeepalive on
Oc4jConnTimeout 12000 (or a similar value)
Also set the following AJP property at OC4J startup to enable OC4J to close AJP sockets in the event that a connection between OHS and OC4J is dropped due to a firewall timeout:
ajp.keepalive=true
For example:
java -Dajp.keepalive=true -jar oc4j.jar
Please tell me where or which file i should put the option
java -Dajp.keepalive=true -jar oc4j.jar ??????/ -
Hi Everyone,
I'm loading 690k odd records to cube
I am facing short dump error while data request is processed to cube.
In ST22 i'm getting Timeout Error.
Buffer time is set for 10mins to process
Can anyone guide me in this issue.
Thanks in advanceHi,
Due to data volume your load took more than 7hrs. in general time out time is 7hrs. so in your case its may exceeded.
Try to increase time out time for your info package.
Go to your info pack--> menu scheduler --> time out time--> increase 7 hrs to 14hrs and trigger your load again. if its full load delete failed load and retrigger.
Thanks -
Dump error when clicked on text elements in SAP Script window
Hi All,
There is an inclusion in SAP Script. I have written the code in driver program. I need to pass the value to SAP Script in the requested position. But when I go to SE71 > Form Name > Change or Display > MAIN Window > Text Elements > I get a dump error.
Category ABAP Programming Error
Runtime Errors DATA_LENGTH_TOO_LARGE
Except. CX_SY_RANGE_OUT_OF_BOUNDS
ABAP Program SAPLSTXK
Application Component BC-SRV-SCR
Date and Time 30.04.2014 20:00:08
Short text
Invalid partial field access: Length is too large
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLSTXK" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_RANGE_OUT_OF_BOUNDS', was not
caught in
procedure "TOKEN_COMMENT" "(FORM)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
In the executed program "SAPLSTXK", the system attempted to access the field
"ITF_TOKEN" of the type "C" and with the length 255 using the length 272.
However, a partial field access with a length specification that is
larger than the field length is not allowed.
How to correct the error
Reduce the length used to access the field.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"DATA_LENGTH_TOO_LARGE" "CX_SY_RANGE_OUT_OF_BOUNDS"
"SAPLSTXK" or "LSTXKFRN"
"TOKEN_COMMENT"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
2937 * todo empty comment ???
2938 if g_tm_open eq true or " Section
2939 g_tm_b_close eq true.
2940 l_token = '\chcbpat0'.
2941 l_len = strlen( l_token ).
2942 token_control = true.
2943 assign l_token to <itf1>.
2944 perform put_itf1_new using l_len.
2945 perform token_line_begin changing l_next_token.
2946 else. " without section
2947 concatenate '\chcbpat0\line' g_cf_string l_cbpat_token into l_token.
2948 l_len = strlen( l_token ).
2949 token_control = true.
2950 assign l_token to <itf1>.
2951 perform put_itf1_new using l_len.
2952 endif.
2953 elseif l_next_token-code eq ')L'. " \par
2954 l_token = '\par'.
2955 l_len = strlen( l_token ).
2956 token_control = true.
2957 assign l_token to <itf1>.
2958 perform put_itf1_new using l_len.
2959 elseif l_next_token-code eq '(C' or " \par + format
2960 l_next_token-code eq ')C' or
2961 l_next_token-code eq '(&' or
2962 l_next_token-code eq 'TA' or
2963 l_next_token-code eq 'SC' or
2964 l_next_token-code eq 'ST'.
2965 concatenate '\chcbpat0\par' g_pf_string g_cf_string l_cbpat_token into l_token.
2966 l_len = strlen( l_token ).
>>>>> itf_token(l_len) = l_token.
2968 token_control = true.
2969 assign l_token to <itf1>.
2970 perform put_itf1_new using l_len.
2971 endif.
2972
2973 * Step 7: (L to disarm
2974 if g_compose eq true and
2975 l_next_token-code eq '(L'.
2976 perform read_next_itf_token(rstxscan) using p_token.
2977 endif.
2978
2979 ENDFORM. " token_comment
2980 *&---------------------------------------------------------------------*
2981 *& Form create_lang_info
2982 *&---------------------------------------------------------------------*
2983 * add default language to rtf
2984 *----------------------------------------------------------------------*
2985 * -->P_HEADER text
2986 * <--P_RESULT text
How do I open the text elements? I need to pass the variable inside SAP Script.
Please Help. The requirement is pending from very long. Not able to rectify this issue.
Regards,
RekhaHi,
There is a SAP Note about this problem
566794 - Runtime error: STRING_OFFSET_TOO_LARGE during conversion
Correction Instructions
Correction Instructions
Software Component
Valid from
Valid to
Number
SAP_BASIS
46B
46D
473267
SAP_BASIS
610
620
473185
Support Packages & Patches
Support Packages
Software Component
Release
Support Package
SAP_BASIS
46B
SAPKB46B48
46C
SAPKB46C39
46D
SAPKB46D28
610
SAPKB61027
620
SAPKB62014
Regards
Miguel -
Dump error while creating or double click the info package
Hello experts,
I have actived infocube 0FIAR_C03 in BI content. Ago, The creation infopackage have been deleted in the past , today, I created a infopackage, while I update mode selected u2018initialize delta processu2019, then click save button , the system prompt u2018Deltas already loaded for request REQU_D64R47LDUSZHY9CBIB86WMLFJ init.selection; no 2. initu2019, I canoti save it for my setting. Why is this?
Then I have search cause in SDN, and I have reference OSS Note 852443 to do .
Note 852443 have mention some table: RSSELDONE、RSSDLINIT、RSSDLINITSEL、ROOSPRMSC、ROOSPRMSF.
I have to delete that request of record using se16 in these tables: RSSELDONE、RSSDLINIT、RSSDLINITSEL.
in my BI 7.0 system, ROOSPRMSC、ROOSPRMSF is no any data.
I was no found delta queue in RSA7.
Now . Dump error while creating or double click the info package, how can I change this?
Please let me know the solution.
Thanks for your help.
Best Regards
SteveHere are some links which deals with same issue.
Re: Dump In Infopackage
Re: Getting into Short dump at the time of selecting InfoPackage to execute for
Short dump while performing init in infopackage
Re: Infopackage going into short dump
Thanks. -
ABAP dump error while updating product master in APO
Hi All,
Greetings from Vijay!
I need to your help to resolve below issue ;
I am getting error '
No simulation parameters could be set for the
active version'
While i am updating and trying to assign active version to my product master in APO which are created in APO for regression testing
and also sometimes system throwing dump error'
Error in the ABAP Application Program
The current ABAP program "/SAPAPO/SAPLDM_LC_SQL" had to be terminated because
it has
come across a statement that unfortunately cannot be executed.;
I appreciate your help
Thanks
Vijay JobHi Vijay,
Can you check note 1465462 ?
The same problem is mentioned in the note with correction .
Regards,
Mukesh pandey -
Dump error while running termination action
I'm facing a dump error while running termination action, please, if some one wud help me out of this error. here when im termination action the system is opening action infotype when given the date of termination and try to save, system shows a warning message that "Record valid from 08.08.1995 to 31.12.9999 delimited at end" then I press enter and system is asking me to save. when I do so, rather than it taking me to another screen its throwing a dump error.
Runtime Errors SYNTAX_ERROR
Date and Time 21.10.2008 18:54:05
Short dump has not been completely stored (too big)
Short text
Syntax error in program "SAPLCACS_BU_PARTNER ".
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLBUD_CHECK" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "SAPLCACS_BU_PARTNER " in
include "LCACS_BU_PARTNERU44 " in
line 19:
"The key of internal table "LT_BUT0BK" contains components of type "X" "
"or "XSTRING". The "READ TABLE LT_BUT0BK" statement is not permitted fo"
"r such tables in a Unicode context."
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
Error in the ABAP Application Program
The current ABAP program "SAPLBUD_CHECK" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
The following syntax error was found in the program SAPLCACS_BU_PARTNER :
"The key of internal table "LT_BUT0BK" contains components of type "X" "
"or "XSTRING". The "READ TABLE LT_BUT0BK" statement is not permitted for
"r such tables in a Unicode context."
ger Location of Runtime Error
Program SAPLBUD_CHECK
Include LBUD_CHECKF01
Row 1.129
Module type (FORM)
Module Name RLDEL_CHECK
ce Code Extract
SourceCde
9
0 *------ ... Funktionsbausteine ermitteln -
1 CALL FUNCTION 'BDT_TBZ1F_GET'
2 EXPORTING
3 iv_objcn = gc_objcn_bupa
4 iv_objap = gc_objap_bupa
5 TABLES
6 et_tbz1f = lt_tbz1f
7 EXCEPTIONS
8 not_found = 1
9 OTHERS = 2.
0 READ TABLE lt_tbz1f INDEX 1.
1 IF sy-subrc = 0.
2 CALL FUNCTION 'BUP_PARTNER_GET'
3 EXPORTING
4 i_partner = is_but100-partner
5 i_cp_exclude = gc_x
i_is_exclude = gc_x
PORTING
e_but000_int = ls_but000_int
CEPTIONS
OTHERS = 1.
... Funktionsbausteine aufrufen -
T lt_tbz1f WHERE ztpkt = 'RLDEL'
AND NOT fname IS INITIAL.
Datümer alt = neu = SPACE => Löschung, sonst Update -
(Einschränkung der Gültigkeit)
FUNCTION lt_tbz1f-fname
PORTING
i_partner = is_but100-partner
i_partnerguid = ls_but000_int-partner_guid
i_role = is_but100-rltyp
i_dfval = is_but100-dfval
i_calltp = iv_calltp
i_valid_from = is_but100-valid_from_dats
i_valid_from_old = iv_valid_from_old
i_valid_to = is_but100-valid_to_dats
i_valid_to_old = iv_valid_to_old
PORTING
e_result = lv_result.
... Ergebnis merken, wenn höher als bisheriges Zwischenergebnis-
v_result > gv_wu_result. "#EC PORTABLE
wuresult = lv_result.
F.
... Ergebnis ist 'Nicht löschen': Zeitpunkt abbrechen -HI Mallik,
for termination action the operation that i've set is
lis9 0001
cop 0002
lis9 0007
cop 0008
lis9 0014
lis9 0015
lis9 0587
so just want to know if the set format for termination action is right
and other option is that if there is some change to settings of infotype charateristics in table v_t582A this may cause change in the date that is cause of error.
can u please suggest the above alignment of operations and infotype is right and provide me the idle settings for infotype characteristics which may solve my query.
thanks mallik. -
At the time of RFQ creation dump error
Dear All,
At the time of RFQ creation one Dump error is coiming... please advise to solve this issue...
the error message is :
Runtime errors SYNTAX_ERROR
Occurred on 09.09.2009 at 12:10:27
Syntax error in program "SAPLV61A ".
What happened?
The following syntax error occurred in the program SAPLV61A :
"Incorrect logical expression: Instead of "X" a field, a function or "("
Error in ABAP application program.
The current ABAP program "SAPLMEVA" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
What can you do?
Please eliminate the error by performing a syntax check
(or an extended program check) on the program "SAPLV61A ".
You can also perform the syntax check from the ABAP/4 Editor.
If the problem persists, proceed as follows:
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
The following syntax error was found in the program SAPLV61A :
"Incorrect logical expression: Instead of "X" a field, a function or "("
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
To obtain this, call the system log with Transaction SM21
and select the "Print" function to print out the relevant
part.
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, you can either use the "PRINT" command in the editor or
print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
System environment
SAP Release.............. "620"
Application server....... "ARCHIVAL"
Network address.......... "172.26.2.145"
Operating system......... "Windows NT"
Release.................. "5.2"
Hardware type............ "4x Intel 80686"
Character length......... 8 Bits
Pointer length........... 32 Bits
Work process number...... 0
Short dump setting....... "full"
Database server.......... "ARCHIVAL"
Database type............ "MSSQL"
Database name............ "EDP"
Database owner........... "dbo"
Terminal................. "cheeid92corit"
Character set............ "English_United State"
SAP kernel............... "640"
Created on............... "Mar 9 2009 22:54:07"
Created in............... "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
Database version......... "SQL_Server_9.00 "
Patch level.............. "274"
Patch text............... " "
Supported environment....
Database................. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"
SAP database version..... "640"
Operating system......... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2,
Windows NT 6.0"
User, transaction...
Client.............. 777
User................ "MMCORE"
Language key........ "E"
Transaction......... "ME47 "
Program............. "SAPLMEVA"
Screen.............. "SAPMM06E 0311"
Screen line......... 54
Information on where terminated
The termination occurred in the ABAP program "SAPLMEVA" in
"ME_LOAD_VARIANTS_PRICING".
The main program was "SAPMM06E ".
The termination occurred in line 55 of the source code of the (Include)
program "LMEVAU08"
of the source code of program "LMEVAU08" (when calling the editor 550).
Source code extract
000250 ENDIF.
000260 *--> Initialisieren
000270 *--> not necessary anymore (Raimond Buchholz)
000280 * CALL FUNCTION 'CUD0_CONFIGURATION_INITIALIZER'.
000290 *--> Preisteile der Varianten besorgen
000300 CALL FUNCTION 'CEI0_GET_CONDITIONS'
000310 EXPORTING
000320 INSTANCE = I_CUOBJ
000330 APPLICATION = 'MM'
000340 TABLES
000350 * CONDITIONS = T_VCKEY. "del 194053
000360 CONDITIONS = T_VCKEY "ins 194053
000370 exceptions "ins 194053
000380 error_message = 01 "ins 194053
000390 others = 02. "ins 194053
000400 *--> Preisteile der Varianten mit Belegnummer versorgen
000410 LOOP AT T_VCKEY.
000420 T_VCKEY-KAPPL = 'M '.
000430 T_VCKEY-VBELN = I_EBELN.
000440 T_VCKEY-POSNR = I_EBELP.
000450 MODIFY T_VCKEY.
000460 ENDLOOP.
000470 ENDIF.
000480
000490 *--> Preisteile der Varianten an Preisfindung übergeben
000500 *- pricing_load_variant_key muß auch bei Positionen ohne Konfiguration
000510 *- laufen, da die Logik im PRICING zu 4.0 umgestellt wurde
000520 IF I_NO_LOAD IS INITIAL.
000530 DATA: I_POSNR LIKE VBAP-POSNR.
000540 I_POSNR = I_EBELP.
CALL FUNCTION 'PRICING_LOAD_VARIANT_KEYS'
000560 EXPORTING
000570 APPLICATION = 'M '
000580 VBELN = I_EBELN
000590 POSNR = I_POSNR
000600 TABLES
000610 TVCKEY = T_VCKEY
000620 EXCEPTIONS
000630 OTHERS = 1.
000640 ENDIF.
000650
000660 ENDFUNCTION.
Contents of system fields
SY field contents..................... SY field contents.....................
SY-SUBRC 0 SY-INDEX 0
SY-TABIX 1 SY-DBCNT 1
SY-FDPOS 1 SY-LSIND 0
SY-PAGNO 0 SY-LINNO 1
SY-COLNO 1 SY-PFKEY GVP
SY-UCOMM
SY-TITLE Maintain Quotation : Item 00001
SY-MSGTY E SY-MSGID AIPLOC
SY-MSGNO 002 SY-MSGV1 303632
SY-MSGV2 SY-MSGV3
SY-MSGV4
Kind regards
P.AnandhakumarHi Anandhakumar,
Debugg the transaction with help of ABAPER.
System will show you the reason for the above error.
Hope this should solve your problem.
Thanks and regards
Gitesh -
Dump error while Testing the Workflow
Hi Friends,
I have developed workflow for Approve and Reject Scenerio. But when i press Approve, the user should get the mail, same for Rejected also. When Test the Workflow, I am getting the Dump Error as
*Dump Error*********
Unable to read RFC destination WORKFLOW_LOCAL_320
Long text of error message:
Technical information about the message:
Message class....... "SWF_RUN"
Number.............. 617
Variable 1.......... "WORKFLOW_LOCAL_320"
Variable 2.......... "RFC_READ_DESTINATION_TYPE"
Variable 3.......... "DESTINATION_NOT_EXIST"
Variable 4.......... " "
Thanks in Advance. Rewarded if useful.
NaveenNaveen,
It seems someone might have deleted the corresponding RFC destination (which is created automatically). Check in SM59.
ss
Maybe you are looking for
-
FREE TRIAL - PDF file convertion to a Word doc
How do I get the free PDF file to convert it to a Word document in DOCX format? The email from Adobe does not explain how to get it. I have attempted to get it converted but it keeps saying that I must pay the subs. Iain
-
Hi All, can anyone tellme how to split midi parts up, i.e. if I got a midifile which has a brass section in one part but I would like to split the parts up trumpet/saxes/trombone/baritone etc. and use diff. instruments to trigger the sounds. Is there
-
Hello, on behalf of extending RAM memory my iBook G4 (1,42Ghz 14,1" 512MB) manual provides using rather PC2100 DDR 266 then PC2400 DDR 333 modules. As I was told these RAM modules are quite old I bought a PC2700U DDR 333 and put it in. My question is
-
WRT110 can't connect message & dsl company doesn't see router :(
WRT 110 Cannot get on internet wirelessly -wireless light is on-- on computer & DLS company can't see my wireless computer router ,I get message cannot connect and a red x . I'm on with ethrnet now but need to get router going again has worked fine
-
Flash Image Viewer captions won't appear entirely
I am trying to insert an image viewer on a page to display some pictures with captions below each one. When I insert the images and text with the image viewer's default settings (colors, text size, etc.) all the text appears. If I change any of the s