Set-VmNetworkAdapterIsolation One or more arguments are invalid (0x80070057)

Hello, not sure what am I missing?
Set-VmNetworkAdapterIsolation -VMName "TestGW" -VMNetworkAdapterName "IntNIC" -MultiTenantStack ON -IsolationMode NativeVirtualSubnet
Set-VmNetworkAdapterIsolation : The operation failed.
Failed while applying switch port settings 'Ethernet Switch Port Isolation Settings' on switch 'HNVswitch8': One or more arguments are invalid (0x80070057).
A parameter that is not valid was passed to the operation.
At line:1 char:1
+ Set-VmNetworkAdapterIsolation -VMName "TestGW" -VMNetworkAdapterName "IntNIC" -M ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidArgument: (Microsoft.HyperV.PowerShell.VMTask:VMTask) [Set-VmNetworkAdapterIsolation], VirtualizationOperationFailedException
+ FullyQualifiedErrorId : InvalidParameter,Microsoft.HyperV.PowerShell.Commands.SetVmNetworkAdapterIsolationCommand

Hi ,
I test the command in my environment , it worked .
My suggestion is to remove the Vswitch that the VMs connect to then re-create a new one for them and run the cmdlet again .
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

DFSR Replication Event ID 1202 The DFS Replication service failed to contact domain controller Additional Information: Error: 160 (One or more arguments are not correct.)

Hi,
hummmm...
The client had 1 Server with AD and All Apps, IIS, Terminal Servers (30 device Cal), File Server, SQL2008R2 on it
Task: Install new AD server promote it to DC, bring in 2nd server, Replicate the File Server (DFSR) on these 2 servers, and demote it to standard server.
1) Old AD with name "Server" with OS-2008R2 SP1 and is a DC.
2) Brought in a new server "PrimaryAD", Installed 2008R2, done DC Promo, and added it as Additional Domain controller
3) Transferred roles from old server "Server" to "PrimaryAD"
4) Brought in a new File Server replicating server "Backup-Server"
5) Copied all the data from Server to Backup-server as DFS initial file sync with robocopy
6) here the problem started, after the copy finished, next morning the "Server" server crashed.....
7) thank god the data was backed up on Backup-server. but we didnt get the time to Demote the server "Server" and remove AD from it.
8) Since AD was replicated so "PrimaryAD" was are DC, brought 2nd Server "SecondaryDC" as additional domain controller.
9) we cleaned up the metadata and used ASIEDIT to clean the remaining stuff.
10) the "Server" server was formatted and renamed as "Primary-Server" and OS2008R2 SP1 was installed with rest of required apps
11) so now the PrimaryAD the DC, SecondaryAD the Additional Domain controller, Primary-Server the mail server and File server, the Backup-server, the replicated server.
Now configured DFS Replication from Primary-Server to Backup-server and receive following Event ID 1202
If i Configure DFS Replication as follows
PrimaryAD <<>> SecondaryAD -= Works... no errors...
PrimaryAD <<>> Backup-Server = Creates but Dosent works Event ID 5012, error The DFS Replication service failed to communicate with partner BACKUP-SERVER, Additional Information: Error: 9026 (The connection is invalid)
PrimaryAD <<>> Primary-Server = Dosent creates replication job just hangs,
on primaryad continious Eveni ID 10009, DCOM was unable to communicate with the computer "SERVER" using any of the configured protocols
......something on PrimaryAD is still trying to connect to old corrupt AD server "Server"
No errors with AD replication, SYSVOL & Netlogon shares also working fine and accessible.
DFS Diagnose report says
DNS name: backup-server.mydomain.com
Domain name: mydomain.COM
Reference domain controller: -- (HERE there is NO DOMAIN CONTROLLER mentioned)
IP address: 192.168.1.248,192.168.1.251,::1
Site: Default-First-Site-Name
Forgot to mention, gave full rights with ADSIEDIT to DFSR-LocalSettings for all server to Administrator and read permissions to "Authenticated Users"
DFSRDIAG POLLAD throws following error
c:\Dfsrdiag pollad /verbose
[INFO] Computer Name: BACKUP-SERVER
[INFO] Computer DNS: Backup-Server.mydomain.COM
[INFO] Domain Name: mydomain
[INFO] Domain DNS: mydomain.COM
[INFO] Site Name: Default-First-Site-Name
[INFO] Connected to WMI services on computer: Backup-Server.mydomain.COM
[INFO] Invoke PollDsNow() method on Backup-Server.mydomain.COM
[ERROR] PollDsNow method executed unsuccessfully. ReturnValue: 12 (0xc)
[ERROR] Failed to execute PollAD command Err: -2147217407 (0x80041001)
Can anyone point me to any direction which can lead to resolution of this ERROR and make DFS_R work..
Thanks
bikram

Hi,
It seems that DCPROMO did its work without complaints, still the DFSR references remained in AD. You could refer to the article below to clean up the DFS Replication object.
How to remove data in Active Directory after an unsuccessful domain controller demotion
http://support.microsoft.com/kb/216498
In additional, please refer to the following thread to troubleshoot the issue:
DFS is not working anymore.
http://social.technet.microsoft.com/Forums/windowsserver/en-US/953be9ef-e9e3-4885-a5c4-47fc475ba562/dfs-is-not-working-anymore?forum=winserverfiles
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Argument Error: One or more parameters are null.

I am getting "javax.servlet.jsp.JspException: Argument Error: One or more parameters are null". Following are first two lines of the exception
javax.servlet.jsp.JspException: Argument Error: One or more parameters are null. at com.sun.faces.taglib.html_basic.PanelGridTag.doEndTag(PanelGridTag.java:470) at empEditById.jspService(_empEditById.java:290)
Can anyone help me out with this.

I don't know which part of jsp code is giving problem. Here is the complete listing
<f:view>
<html>
 <head>
 <meta http-equiv="Content-Type"
 content="text/html; charset=windows-1252"/>
 <title>Main</title>
 </head>
 <body><h:form>
 
 Employee Edit
 
 
 <h:messages/>
 
 <h:panelGrid columns="3">
 <h:outputLabel value="Employee Id:"/>
 <h:inputText id="empId" disabled="true"
 value="#{b_empEditById.empId}"/>
 <h:panelGroup/>
 <h:outputLabel value="First Name:"/>
 <h:inputText id="firstName" required="true"
 value="#{b_empEditById.firstName}"/>
 <h:message for="firstName"/>
 <h:outputLabel value="Last Name:"/>
 <h:inputText id="lastName" required="true"
 value="#{b_empEditById.lastName}"/>
 <h:message for="lastName"/>
 <h:outputLabel value="Hire Date:"/>
 <h:inputText id="hireDate" value="#{b_empEditById.hireDate}">
 <f:convertDateTime pattern="dd-MM-yyyy"/>
 </h:inputText>
 <h:message for="hireDate"/>
 <h:outputLabel value="Reports To:"/>
 <h:selectOneMenu id="reportsTo"
 value="#{b_empEditById.reportsTo}">
 <f:selectItems value="#{requestScope.b_empEditById.selectAllEmployees}"/>
 </h:selectOneMenu>
 <h:message for="reportsTo"/>
 <h:commandButton value="Confirm" id="edit"
 action="#{b_empEditById.confirm}"/>
 <h:commandButton value="Back" type="submit" immediate="true"
 action="back"/>
 </h:panelGrid>
 
 </h:form></body>
</html>
</f:view>I am using Oracle jdeveloper 10g but I don't which version of JSF I am using.

Flat File Load Issue - Cannot convert character sets for one or more charac

We have recently upgraded our production BW system to SPS 17 (BW SP19)
and we have issues loading flat files (contain Chinese, Japanese and
Korean characters) which worked fine before the upgrade. The Asian
languages appear as invalid characters (garbled) as we can see in PSA. The Character Set
Settings was previously set as Default Setting and it worked fine until
the upgrade abd we referred to note 1130965 and with the code page 1100
the load went through (without the Cannot convert character sets for one or more characters error) however the Asian language characters will appear
as invalid characters. We tried all the code pages suggested in the note e.g.
4102, 4103 etc on the info packages but it did not work. Note that the
flat files are encoded in UTF-8.

I checked lower case option for all IO
When i checked the PSA failed log no of records processed is "0 of 0" my question is with out processing single record system is througing this error message.
When i use same file loading from local workstation no error message
I am thinking when I FTP the file from AS/400 to BI Application Server(Linex) some invalid characters are adding but how can we track that invalid char?
Gurus please share your thoughts on this I will assign full points.
Thanks,

Cannot convert character sets for one or more characters

Hello,
Issue:
Source File: Test.csv
Source file dropped on application server as csv file via FTP
Total records in csv file 102396
I can able to load only 38,000 records after that I am getting error message " convert character sets for one or more characters" while loading into PSA .
If i load same csv file from local workstation I am not getting any error message I can able to load total 102396 records.
I am guessing while FTP the file into Application server some invalid codes adding?
But I am FTP 7 files, out of 7 I am unable to load only 1 file.
Anybody have faced this kind of problem please share with me I will assign full points
Thanks

I checked lower case option for all IO
When i checked the PSA failed log no of records processed is "0 of 0" my question is with out processing single record system is througing this error message.
When i use same file loading from local workstation no error message
I am thinking when I FTP the file from AS/400 to BI Application Server(Linex) some invalid characters are adding but how can we track that invalid char?
Gurus please share your thoughts on this I will assign full points.
Thanks,

Validate that one or more checkbox are ticked.

Currently I'm checking if the user has ticked at least one of the checkboxes by using:
if(CheckBox1.rawValue == 0 && CheckBox2.rawValue == 0){
app.alert("Please select one or more checkboxes.");
Is there a way to count the number of checkboxes and do a loop. If you have 15 checkboxes the code above gets a bit hard to read.
I've also use the <validate nullTest="error"/> in the xml to flag the checkbox as being required but this is not true. As long as one or more checkboxes are select the user should not be alerted or shown that checkboxes are not selected. Is there a way to highlight the checkboxes?

This is what I would do.....
1. Set up a Global Variable under File>>Form Properties>>Variables Tab
 //Variable declared here are always considered string
 Example: GCheckCount and set the initial value 0
2. For each CheckBox I would add the following code under "change" event
if (this.rawValue == 1) {
 GCheckCount.value = "" + GCheckCount.value + 1;
}else {
 GCheckCount.value = "" + GCheckCount.value - 1;
3. Also for each CheckBox I would add the following code under "docReady" event to get the initail count
if (this.rawValue == 1) {
 GCheckCount.value = GCheckCount.value + 1;
4. When you validate do the following
if (GCheckCount.value == "0") {
 app.alert("Please select one or more checkboxes.");

"One or more pages are in use and could not be deleted" - AGAIN.

Open a PDF file.
Save it under a different name
Try to delete a page
You'll get this error:
"One or more pages are in use and could not be deleted"
I've had this billions of times now and the only solution that works 100% of the time is closing and re-opening the file. This leads me to believe it's something with "locking" the file while saving, but not unlocking it after done saving.
GET THIS FIXED PLEASE because it's annoying LOADS and LOADS of people.
As evident by the 7000+ search results for the exact phrase "One or more pages are in use and could not be deleted".
And that's just the part of the userbase that actually reports the problem.
There are several topics about this issue, some marked as "solved" erroneously.
Note, I'm a paying customer, use Photoshop/Illustrator/Dreamweaver/Fireworks and Bridge during my daily work, and have had this issue for months and months across several different computers (two different workplaces, and at home) and have ran into this time and again, when all I want to do is cut a PDF into several smaller PDFs.
Closing and re-opening your program because you're unable to fix this issue is NOT ACCEPTABLE. It's THE WORST kind of user experience, as this issue is the ONLY reason I use Acrobat at all, and it can't even do that.
Cheers,
- Dirk
Ps.: Sorry, I'm very frustrated running into this time and again, and then having to wade through thick mud (your site is a UX nightmare) to report this issue, which has been report oodles of times on this board before.

Yup. I get this problem too. And I'm posting in April of 2015, so I see this problem has existed a long time. Acrobat "Pro" (ha ha) is full of stupid, annoying problems. And the interface is clunky. I'm going use PDF Split and Merge to remove the page I'm struggling with. Ridiculous that Adobe Acrobat Pro cannot remove one page from a PDF file. I am NEVER upgrading this product. I am done with Adobe.

When I try to delete page(s) from a PDF document I created, I geth the following message: "One or more pages are in use and could not be deleted." Any suggestions?

When I try to delete page(s) from a PDF document I created, I geth the following message: "One or more pages are in use and could not be deleted." Any suggestions?

I sent an email to TerraGo Support and they sent the following response: "This has bug has been discovered and our development team is quickly creating a patch to resolve the problem. The patch should be available within a week or two. For your reference, the bug number assigned to this case is: 3620. Check back in about two weeks and hopefully the patch will be available. Again, I apologize for the inconvenience."

Cannot convert character sets for one or more characters Error message

Hello,
I am getting this error message "Cannot convert character sets for one or more characters" when i try to transfer the data from Application server file as CSV to PSA.
Using T-code AL11
Under SAP Directory I open my file I can able to see all contents of my file right?
But i can't able to see all my data because of this I am getting ths error message?
I am loading Master data attribute
Is there any limitation on record length?
Please share your thought..
Thansk

Which length should not exceed 60.
When i load the same file from local workstation I can able to load no error message
Why I am getting if i load same file from application server?
Thanks

Convert character sets for one or more characters

Hello,
Issue:
Source File: Test.csv
Source file dropped on application server as csv file via FTP
Total records in csv file 102396
while loading into PSA I can able to load only 38,000 records after that I am getting error message " convert character sets for one or more characters" .
If i load same csv file from local workstation I am not getting any error message I can able to load total 102396 records.
Anybody have faced this kind of problem please share with me I will assign full points
Thanks

Hi,
check
Flatfile Issue
Regards,
Arek

One or more application are using Itunes scripting interface

After downloading update on ITunes 10 on windows 7 it freezes. Or something pops up and says one or more application are using itunes scripting interface quit.
I tried everything. Help.

well, you're the first one I''m seen reporting this, so that makes me think it is unique to your PC. So I doubt an updated iTunes version is going to "fix" this.
The way to find things like this is by using MSCONFIG as explained in these directions. But it is tedious to find it, requires a lot of PC restarting. You said it's not a big deal, so you might not want to spend the time.
http://docs.info.apple.com/article.html?artnum=302538

HELP!!! Message - (One or more applications are using the iTunes scripting interface. Are you sure you want to quit?) How do I get this to stop?

I bought a new Sony Vaio Laptop running Windows 8, 64bit, i7 processor. Everytime I open iTunes and then close out, the following message occurs: (i-tunes message - One or more applications are using the iTunes scripting interface. Are you sure you want to quit?) Then it starts counting down from 20 seconds unless I just click on the (Quit) button. How do I get this to stop? Please be specific, I am challenged when it comes down to computers.
Thank You

This was extremely annoying for me, also. I started uninstalling unneeded Sony applications to try to narrow down the problem. It turned out not to be a Sony application... it is some functionality built into the bluetooth driver software package by Broadcom. Uninstalling the bluetooth package (via the control panel) takes care of the problem. Itunes also boots up way quicker. But uninstalling it will remove features related to bluetooth and nfc. For me, that isn't an issue, since I don't use them. Since you said you're "computer challenged" I would probably just send an email to sony complaining about the problem. They'll get in touch with Broadcom eventually (the manufacture of the drivers) and get the problem fixed.
Side note: the Broadcom package is huge... nearly 1GB in size. Which is crazy. I can't imagine what it does considering the size of it. Entire operating systems can take up less storage. Also, I have no idea how it starts an itunes plugin without placing it into the standard plugin directories.

Solaris 10 wont install - One or more disks are found

Hi,
Hi I am new to installing Solaris on a E450 server.
I place the cdrom and type boot cdrom
Answering questions about network region etc.
The installer starts the installation and comes with an error:
One or more disks are found, but one of the
following problems exists:
> Hardware failure
> Unformatted disk.
So no installation.
How do I solve this?
I have tried different disks and even to format the disks.
I have had FreeBSD running on this system without any problem.

The solution:
If you��re trying to install Solaris (SPARC) on a disc which previously had another O/S (*BSD) on it, you will more then likely come across the following error after the system identification stage is complete:
One or more disks are found, but one of the following problems exists:
> Hardware failure
> Unformatted disk.
The problem is to do with the disc label, at the shell fireup format with the e switch
format -e
select the disc which you are trying to install onto, if you are told that the disc doesnt not contain a disk label, would you like to write a lablel, say yes & specify the type as SMI Label, If youre not asked about the label & presented with a menu, goto the partition section, choose label, specify the type as SMI.
quit & reboot & all should be well

Adobe standard 9 "one or more pages are in use and could not be deleted"

I am an experience user from 4 to now 9 standard. At work when extracting pages from a block scan I keep getting "one or more pages are in use and could not be deleted" it does not extract the pages but deletes some and leave some in the master document. This happens on a regular basis and is so frustrating when trying to split a block document into individual ones. This is on adobe 9 professional... Process is 3500 pages document, open up the page tab to see the pages. Highlight the first and last page of the document you want to extract. Right click and select extract, tick the box delete after extracting. Some times it works and a lot of the time I get the error above. I have google’d this error and there seems to be no feedback to cover the reason as to why it creates this error and what does it mean?
Thanks

I use this feature once a month to extract / delete some 200 pages from an 800 page file. I found the release notes for 10.1.4 stated that this issue was fixed. I updated my Acrobat to the 10.1.4 release and i was still having the problem. I finally fixed it by disabling the Win XP compatability feature that i had enabled in the properties of the Acrobat executable. I had enabled this feature a couple of months ago as a fix to this specific problem, now it's not necessary.
Environ: Win 7 32-bit and Acrobat X, 10.1.4.

Adobe Pro delete pages error. One or more pages are in use and could not be deleted.

Adobe Pro delete pages error. One or more pages are in use and could not be deleted.
Hi, can anyone assit. I am compiling a pdf by inserting several documents and am unable to delete specific pages. I have used this function on a previous Adobe Pro version but have a problem editing.

I use this feature once a month to extract / delete some 200 pages from an 800 page file. I found the release notes for 10.1.4 stated that this issue was fixed. I updated my Acrobat to the 10.1.4 release and i was still having the problem. I finally fixed it by disabling the Win XP compatability feature that i had enabled in the properties of the Acrobat executable. I had enabled this feature a couple of months ago as a fix to this specific problem, now it's not necessary.
Environ: Win 7 32-bit and Acrobat X, 10.1.4.

Set-VmNetworkAdapterIsolation One or more arguments are invalid (0x80070057)

Similar Messages

Maybe you are looking for