Set volume control

on my 1gb nano when i want to raise the volume control i get it to the place to set it,move the bar and hit the center button as instructed.some times it goes back to the previous window and sometimes it goes to the next window where you either set a code or just hit done.then it goes backto the window ahead of the one that the volume control bar is in.hit the button to go to the volume control to check it and its right back where it started.so how do i make it set?this is getting to be a pain.and it is updated with the latest up dates.

Hi,
Right click the speaker icon in the Taskbar and select 'Recording devices'. Left click the 'Internal Mic' once just to highlight it and then click the Properties button. The controls you require should be on the 'Levels' tab.
NOTE:
If you do not see the option as described above, try using Recovery Manager to reinstall your Audio Driver ( IDT, Connexant etc ) - the procedure for using recovery manager to reinstall Software and Drivers is detailed in the relevant document on the link below.
Recovery Manager - Windows 7
Recovery Manager - Windows Vista
After the reinstallation has completed, restart the notebook and check if the option is now available.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

How can I set up a custom keyboard shortcut for volume control?

Hi all,
I use my black MacBook at work, connected to an external monitor and external keyboard. I'm looking for a way to set up the F buttons on my external keyboard as volume control, just as they do on my laptop keyboard. Looking for F3 to F5 to be volume mute, down, and up, respectively.
I tried going into Keyboard Shortcuts in System Preferences but since there is no menu item for volume control I can't seem to add it. Anyone know how I can go about doing this or what I'm missing?
Thanks
Mike

paste the following into Applescrpt Editor (it's in /Applications/Utilities)
<pre style="
font-family: Monaco, 'Courier New', Courier, monospace;
font-size: 10px;
margin: 0px;
padding: 5px;
border: 1px solid #000000;
width: 720px;
color: #000000;
background-color: #ADD8E6;
overflow: auto;"
title="this text can be pasted into the Script Editor">
set curVolume to output volume of (get volume settings)
-- work out the new setting
if curVolume < 96 then
set newVolume to curVolume + 5
else
-- can't go over 100
set newVolume to 100
end if
-- and apply it
set volume output volume newVolume</pre>
this script will increase volume by 5 (out of 100) any time you run it. you can adjust this of course. save the script somewhere.
You can use a 3rd part app launcher to bind a keyboard shortcut to it. I use Butler. there are many others: Quicksilver, ikeys, quickeys, Spark, Launchbar.
this will work the fastest.
If you don't want to use 3rd party tools for this you can make a service using automator but that might be a bit slower than the first option. open automator. it will give you a pulldown screen wiuth the choice of what you want to make. choose "service". set it to receive no input and be available in all applications. add the following "run apple script" action to the service
<pre style="
font-family: Monaco, 'Courier New', Courier, monospace;
font-size: 10px;
margin: 0px;
padding: 5px;
border: 1px solid #000000;
width: 720px;
color: #000000;
background-color: #ADD8E6;
overflow: auto;"
title="this text can be pasted into the Script Editor">
on run {input, parameters}
set curVolume to output volume of (get volume settings)
-- work out the new setting
if curVolume < 96 then
set newVolume to curVolume + 5
else
-- can't go over 100
set newVolume to 100
end if
-- and apply it
set volume output volume newVolume
end run</pre>
save the service, go to keyboard system preferences->keyboard shortcuts->services and make a shortcut for the service you just created.

Just installed ios 7 on my 4s, and I have two issues: 1) control centre: the music controls do not work, only the volume adjust slider works; 2) in mail, where do you find the setting to control how many messages you want your inbox to retain?

Just installed ios 7 on my 4s, and I have two issues: 1) control centre: the music controls do not work, only the volume adjust slider works; 2) in mail, where do you find the setting to control how many messages you want your inbox to retain?

Same problem here on my 4s: Control center music controls do not work.
Since this thread has two issues, I'm going to start a new one with only the music control bug. Topic: iOS 7 Control Center Music Controls Not Working On iPhone 4s

Flash Player audio setting in Win'7 Volume Control

OS is Win'7, up to date. Flash Player is 11.4. Browsers Firefox 15.0.1, Chrome 22, IE 9. When playing a video on a website, the Flash Player volume setting in Volume Control (Windows Mixer) is set to the maximum, same as my speaker volume. How can I permanently set Flash Player's volume to a setting lower than that of my speakers?

This is a known issue in Firefox and Flash Player 11.3 or higher, but our testing (and I just personally re-tested it on my Win7 machine to double-check) indicates that this works as expected in Chrome and Internet Explorer.
There's a public bug tracking the Firefox issue here, and we have a corresponding internal bug assigned to an engineer for investigation:
https://bugbase.adobe.com/#bug=3210602
1.) Use Chrome or Internet Explorer with the latest Flash Player from http://get.adobe.com/flashplayer
2.) Revert to the most recent version of Flash Player 10.3 (Currently 10.3.183.25), which you can download here:
     http://helpx.adobe.com/flash-player/kb/archived-flash-player-versions.html
     Before reverting, you'll need to uninstall the current version of Flash Player first:
     http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-windows.html
If you *are* having the same problems with Chrome or MSIE, can you give me a clear, step-by-step description of how to reproduce the issue? It's possible that we're doing something differently, or there's another component like audio drivers in-play.
Thanks!

Volume control setting in iOS 4.2.1

What is this new on/off slider for the volume control in sound settings...what does this actualy do...i turned it off and its still working?

What is this new on/off slider for the volume control in sound settings
It allows you to adjust the sound volume for ringer & alerts. If you turn "Change with Buttons" to off, the volume adjusted in this setting will be "locked" and using the volume control buttons will have no affect on ringer and alert sound volume.

Emu 0404 USB Constantly Set to Mute By Volume Control

I had my emu 0404 running with my onboard sound for a short while (because the 0404 would not work with voice chat software such as ventrillo).
I have since disabled the onboard sound and uninstalled the driver, but now upon every reboot of my system the sndvolume32.exe (aka Volume Control icon on the taskbar) will set the Wave component of the emu 0404 to mute. I'd rather not have to open up volume control everytime i reboot to unmute my sound. I have tried going through my registry and deleting any remaining trace of the onboard sound (RealTek HD Audio) but no good. I have even uninstalled and reinstalled the emu 0404 drivers many times, still no good. I'm also using XP 64-bit, but i don't know if that matters.
Can anyone tell me how I can stop volume control from setting the Wav output to mute upon rebooting?
Message Edited by infinitydose on 05-02-2008 06:22 PM
Message Edited by infinitydose on 05-02-2008 06:23 PM

Have you set the S/PDIF mode switch to coax and how 'bout monitoring settings? I've read some issues w/ those switches too (you may need to toggle On/Off couple of times to get switch working properly). There is also thei Unofficial E-MU Forum you can check/ask advicing - http://www.productionforums.com/index.php?f=52
jutapa

I just got an iphone 4 yesterday. I got everything all set up and working great. When I woke up last this morning, my ipod has no sound and the albums covers are all mixed up. I've checked all my settings and volume control. My text sound won't work eithe

I just got an iphone 4 yesterday. I got everything all set up and working great. When I woke up last this morning, my ipod has no sound and the albums covers are all mixed up. I've checked all my settings and volume control. My text sound won't work either. However, my ringtone works just fine.

Have you taken the steps recommended in the User Guide: restart, reset, restore?

I'm a bit hard of hearing, and I can't get Firefox to boost the volume adequately, even though I have set all volume controls to maximum. Please fix.

I can't get the volume loud enough, despite setting all controls for maximum volume.
I'm using Windows XP, and a high-end computer/monitor/speaker. I'm using Firefox 4.0.1
I figure you guys are all young, and your hearing is still good, so you don't understand us older folks.

Got the same problem. It seems it is happening all over the place with the i-tunes update.

Setting parental volume control on Shuffle

I just downloaded the software update to include the parental volume control for the iPod Shuffle. However, I don't see anywhere how to set it. Anyone know????
Thanks!

AFAIK, there is no volume limit for Shuffle. The latest iPod Updater, the one which contains the Volume Limiter, contains nothing new for the Shuffle.

My Bose SIE2i volume control does not work. (pause/play does work). This is the secone set - the apple store in Sydney replaced the firsat set that had the same problem. It was working OK and has stopped.

My Bose SIE2i volume control does not work. (pause/play does work). This is the second set - the apple store in Sydney replaced the first set that had the same problem. It was working OK and has stopped.

Thanks again V.K. I did check the layout, and it was listed as alphabet when I inputted the password. So that doesn't seems to the the issue.
Just finished a truly mystifying experiment, but I put in a shorter password in the way mentioned earlier and it worked. I then systematically kept increasing the characters of that password and it seems that if the password starts to exceed about 16, it stops recognizing it. I am fairly sure it is not the password itself since it never gives an error when typing in the verification password. So unless I systematically make the exact mistake twice at the setup screen, and then don't or make a different mistake every time at the login screen, I don't think its my typing skill.
So problem solved for now, but I am still a bit worried. Maybe I should completely reinstall and use a shorter password.
Is there supposed to be a length limit?

How do I set shortcuts on my new onn wireless keyboard for volume control?

Replacement Keyboard
Volume control issue with a non- Apple Keyboard
[Sunday - July 29, 2012 - 2:18pm]
Question: I just purchased a new keyboard in place of the orginal for my iMac which gave out this morning. The brand name of the keyboard is
ONN & it's a wireless board. I've encountered an issue that is a deal breaker - if there is no possible way to correct it. The volume control buttons used to
increase/decrease/mute the volume do not work on this product. I bough this keyboard because it was one of the two that was Mac compatable at my
local store. I realize you get what you pay for but hope there is a soulution!
**Sidenote: I was curious, anyone had any other issues with these keyboards?
Some additional information:
When I woke up this morning, sat down in my computer chair, turned on my iMac and pulled up Textedit. I placed my hands on my faithful keyboard and within moments I realized that it had met it's end. I was quite upset that my original, sleek white iMac keyboard was now a thng of the past but realized that I'd need a replacement very soon in order to get my paperwork done.
Unfortunately, I did not have time to ride forty-five minutes to my local Apple store and I didn't neccesarily want to hand over the cash for one of the pricey keyboards at the time because I am going on a vacation within the next few weeks and each dime counts. So, I decided to visit a store that obviously would have the cheapeast deals in the meantime. So, I headed to to Wal-Mart to make a quick purchase
As I walked the aisles it soon became evident that today's market still is not on point when it comes to having Apple compatable hardware, softwore or anything for that matter. As I quickly skimmed the keyboards I ran across several that caught my eye, but of course, they were all made specifically for Windows. So, finally I approcahed two keyboards that were Mac compatible. The first was way too large and came with a mouse, which I did not need. The second caught my eye and I knew that this would be my purchase.:::
The verdict: an onn wireless keyboard that was both affordable and also gave off a sleek and modern apperance. (Retailed: $24.00)
So, I got home and began using the board. For the first how I was actuallly very satisfied. I like the buttons and the feel of the board. Then, I encountered a problem that made my interested for the new keyboard vanish.
The Issue: On the boards layout, the (F2) key has a symbol that notates the decrease volume control button, (F3) of course would be the increase volume button & lastly the (F4) button represents the [mute] button.
However, these buttons don't work. Sadly, I am not aware of how I could possibly change this issue or if it would even be possible. I sincerely hope that it's possible - because I like the convience of the volume control keys - they were actually my favorite part of the keyboard. Manually changing the volume by going through system preferences does not sound fun to me once so ever. I guess you could call me spoiled but I don't think I can even keep this board if it doesn't have the ability to change volume/mute via the keyboard.
This is a shame because the keyboard it'self isn't bad at all and I actually somewhat like it. So, if you have any information or an answer to this question - I'd truly appreciate hearing your responses! Also, do keep in mind I am a rookie when it comes to computers as a whole so try to simplicate things for me if that is nessecary.
Closing negative note on this keyboard: As I typed this I started encountering a very annoying problem. As I am typing in a line, forming a sentence the keyboard would randomly start typing in pargraphs above and below as well. I'm not sure if this is something that I caused by pressing too hard with my hands or if this is a deffect. Either way, I will saving my receipt and the boxing for this product until I hear further news.
I hope to hear from you soon and I appreciate your help very much.
Have a great day,
David Travis Center

Safari browser and menu shortcuts:
http://docs.info.apple.com/article.html?artnum=42951
Mac OS X keyboard shortcuts:
http://support.apple.com/kb/HT1343
http://docs.info.apple.com/article.html?artnum=75459
and more useful information on keyboard shortcuts here:
http://www.myfirstmac.com/index.php/mac/articles/mastering-keyboard-shortcuts

TS3274 My volume control toggle switch reads "volume effects", I can't get volume and I have tried in my setting, need direction to revert back to volume

My volume control toggle switch is not working because it reads "sound effects", how do I revert to volume?

To solve some sound problems, just follow these simple steps
1. Go to Settings
2. Tap on General
3. Tap on Reset
4. Tap on Reset All Settings
 Cheers, Tom

HT4085 My volume control indicates headphones not speaker. No sound from iPad. Have checked the mute button is off and button is set to operate lock rotation. Any suggestions?

The iPad sound is not working and the volume control shows headphones rather than speaker. Mute is off and I cannot see any reference to headphone/speaker settings or switch. Any suggestions ?

Most likely something is stuck in the headphone jack. Try to vacuum it out or CAREFULLY use a straightened paperclip to remove any dust or lint. You can also try resetting your iPad by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears. Try again to see if the problem persists.

Unable to use volume control ipod itouch 5.1.1

hello,
itouch didn't have a problem with volume slider until recently. through other websites, i have since located the volume slider in music playing mode by double tapping the home button and scrolling to the left but it lacks any button to scroll to increase the volume. music plays well via a sound dock but that has it's own volume controls. sometimes when docking it plays through the handset speakers until seated correctly so i know the internal speakers do work.
any light on the matter would be very much appreciated!!!

I just got off the phone with a friend of mine who was having the same problem as you. Although you say the camera playback is set properly, please recheck this. go into your camera's playback menu>menu>standard set>VCR HDV/DV. Unplug your firewire from the camera. Make sure camera is set to HDV NOT auto. replace firewire cable. Now open FCP. Go in Audio/video settings>A/V devices (farthest tab on right). In box for playback edit to tape different from video output (make sure it's checked) mirrored (checked) Video playback 1080i50, Audio HDV. I hope that works now.
Steve

Why doesn't the volume control settings allow a greater range (on the low end)?

Maybe my ears are really sensitive, but for every iphone I've had, the lowest volume is not low enough. My phone is often louder than I want in my headphones even at the lowest setting. I find myself trying to lower the volume but ending up in silence. After putting it back up to the lowest setting, I end up clicking down again a few minutes later because it's too loud for my surroundings and situation. It's a huge volume jump from the lowest setting to completely off, and alot of times the lowest setting is too loud (even with normal buds or headphones).
The volume limiter setting only limits the upper end, but doesn't change the lower end (just makes the 16 set increments smaller in that reduced range). I know there is also an option to turn down the volume of individual songs in iTunes options, but this problem applies to all aspects of the iphone beyond just my music library (Music apps, Videos, etc.).
Why hasn't apple expanded the lower volume limits? There has to be a way, or is this not possible? Can anybody think of a way to fix this problem?

Meg St._Clair wrote:
Look for headsets with a volume control.
I did exactly this for awhile. I used to have Skullcandy Asyms with the inline volume attenuator (wheel). They've since discontinued them, and my 5 pairs are having wire connectivity issues. All their current models have iphone like volume mechanisms. The problem is most headphones with volume controls tap into the phones own volume control (so the set 16 volume increments). I also looked into using a dongle attenuator, but having the dongle hanging off the phone is just awkward and not easily adjustable.
I don't know why there can't be some form of internal attenuator option, or some other way of extending the lower range of volume.
Does anyone else have this problem of the iPhone being too loud in semi-quiet environments?

Set volume control

Similar Messages

Maybe you are looking for