Set work area shortcut not working Premiere CC

Hello,
I'm having a weird issue, the set work area shortcuts aren't working on Premiere CC on my Mac. Nothing happens when I hit the shortcut combo,
which are set for option [ and option ] under the keyboard shortcut menu.
The shortcuts work as expected on Premiere CS6. Am I missing something here?
Thanks,
Gerry

Hey Peter,
Thanks I didn't realize that Premiere had changed the default to work area off, I found it and can see my work area now.
Cheers,
Gerry

Similar Messages

Rules set in mail are suddenly not working?

I had my rules set in mail and now they are suddenly not working, what to do to fix?

I'm having the same problem, but not with all messages. Only a few slip through. However, when I right-click and Apply Rules to individual emails, the rule suddenly works.
What I'd like to work (and it doesn't), is to be able to select-all emails in inbox and then right-click, Apply Rules. But this never works. AND it'd be must faster than doing it individually. Thx!

Mouse and keyboard shortcuts not working

I running Firefox 3.6.12 on a Mint 10 Gnome system. Firefox has worked very well for the past month with no problems. Today the mouse quit working when trying to click on any of the pulled down menus at the top, "File, Edit, View..." it also will not work on any pull down menus on screen, address bar, stumble tools... The shortcut keys for the top menu are also not working, Alt F will not pull the file menu down. The mouse works on links and single buttons such as the stumble button or bookmark buttons. Also, right clicking does not work anywhere in Firefox, but works in other programs.
I have rebooted the system and uninstalled and reinstalled Firefox to no avail. Any help would be greatly appreciated.

I started Firefox in safe mode and everything started working as it should.
Restarted in normal mode and everything is again working, I didn't make any changes.
The theme was set at default as I have never changed it. I installed all the addons when I first got Firefox, no new ones have been added in over a month.
Does starting in safe mode reset the addons and plugins? Curious as to why starting in safe mode corrected the problem.

Iphone keyboard shortcut not working

Hi
I used to be able to enjoy the keyboard shortcut but it is not working now. Shortcuts that I have include: omw (On my way), wu (where are you?), myadd (my complete address which is about 30 characters long) are all not working. I tried to delete but it will "come back" again when I exit the setting and re-enter again! Also I cannot add new keyboard shortcut.
I am using 4S on version 6.1.3.
Regards,
James

See my response here for future reference. Much easier solution:
Re: iOS 6 + keyboard shortcuts

The RAW setting in Bridge is not working. When I open Bridge I can see only icons, no images. The RA

The RAW setting in Bridge is not working. When I open Bridge I can see only icons, no images. The RAW tool icon is grey, not active. I am going on a trip Tomorrow and I need Bridge to be working. It was working earlier.

I never notied that icon before, and I've been using Bridge for 7 years.
Usually, when you have no image previews for raw files, this means that your Camera Raw plug-in is older than your camera. People always come across this problem when they use a new camera with older software.
To be sure, we need to know which camera you are using, and which version of Camera Raw. To save typing this out for the three-thousandth time, please follow this page which I wrote earlier:
http://yphotography.co.uk/articles/get-adobe-camera-raw-acr-open-photos/
This covers the subject, which is by far the most commonly asked question about opening raw files by a country mile.
If everything checks out fine, let us know. If not, give us more information and we may be able to fix this for you.
PS. Please just open one discussion per problem. There are three threads on this now. It makes it difficult to follow.

CMD+ shortcuts not working in Dreamweaver CS3

I'm have a very strange issue with CMD+ keyboard shortcuts
not working in Dreamweaver CS3 on OSX 10.5. These actions are
working from the menus (i.e., copy, cut, paste, etc.). CMD+
shortcuts work in other CS3 apps. I've searched this forum and
googled up and down and found some references to issues like this
with Dreamweaver 8, but nothing for CS3.
Has anyone experienced this problem? I'm completely stumped.
Lawrence

My concern wasn't with the navbar, but thanks for the headsup.
The problem is that the link in the upper left hand corner, Suzie's Story, is a rollover image but it does not reveal the other image when the cursor goes over it.
                        <div id="topTabs1">
   <div align="center"><a href="http://www.google.com" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('suzie','','Images/Suzie's Story Tab_light.jpg',1)"><img src="Images/Suzie's Story Tab_black.jpg" alt="suzie" name="suzie" width="75" height="45" border="0" id="suzie" /></a></div>
         </div>
#topTabs1 {
width: 75px;
height: 45px;
float: left;
background-color: #ffffff;
padding-left: 0px;
padding-right: 0px

Safari 5.1 customized keyboard shortcut not working

I've just updated safari on snow leopard and my customized keyboard shortcut: go to next/previous panel (ctrl -> and ctrl <-) don't work anymore even if i set them in my system preferences

I'm also experiencing issues with custom keyboard shortcuts not working after the update to Safari 5.1. I had no problems with the previous version of Safari.... I wish I had not updated.

I have an ipod touch it is either a second or third edition and i have just had to restore it to factory setting as it was not working and now the wifi on the device is no longer working. Is there anything i can do about this?

i have an ipod touch it is either a second or third edition and i have just had to restore it to factory setting as it was not working and now the wifi on the device is no longer working. Is there anything i can do about this?

Is it this:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
One user reported that placing the iPod in the freezer fixed the problem. A trick that works frequently with iPhones:
Settings > AirPlane Mode ON, Do Not Disturb ON
Power down and wait 5-10 minutes
Power up
Settings > AirPlane Mode OFF, Do Not Disturb OFF
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar
Otherwise:
Does the iOS device connect to other networks?
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

I've tried everything suggested on forums, but my iMessage and FaceTime are still not working. Any suggestions?

I've tried everything suggested on forums, but my iMessage and FaceTime are still not working. Any suggestions?

Hi katz2010!
I have an article for you here that may help you find those apps again:
Downloading past purchases from the iTunes Store, App Store, and iBooks Store
http://support.apple.com/kb/ht2519
Thanks for using the Apple Support Communities. Have a good one!
-Braden

PS5 Action Keyboard Shortcuts Not Working

PS5 Action Keyboard Shortcuts Not Working -- Running 10.6.7 on a Mac Pro. Any suggestions?
I've tried restarting, changing key combinations, etc. Nothing works and I'm wasting time using my mouse...
Any help is greatly appreciated.

I had this problem too but using Windows 7. I tried resetting, renaming the shortcuts, swearing loudly, none of it worked. I found out it was a totally unrelated program, Xfinity Protection Suite, that was the culprit. My virus protection program added it as an 'upgrade.' AFter I uninstalled it everything was back to normal. Have you installed anything new onto your computer lately that could be interfering?

Work area is not too long enough

hi,
i am trying to insert data into a custom table and i use the statement
insert ztable from workarea.
and i get the syntax error "work area is not too long enough".
i have a mandt field as the first field in my custom table. workarea is defined to hold the rest of the vaules.
whats wrong ?
thks

I have tried as you said. My logic is following:
FORM update_table .
   DATA wa_event1 TYPE zps_event.
   CLEAR wa_event1.
   wa_event1-pspid       = lv_proj.
   wa_event1-category = p_cate.
   wa_event1-long_text = p_event.
   wa_event1-erdate     = p_date.
   INSERT zps_event FROM wa_event1.
   IF sy-subrc IS INITIAL.
     WRITE: 'Successful'.
   ENDIF.
ENDFORM.                    " UPDATE_TABLE
In p_event I gave following this input:
Do the implementation for the same class to handle the event i.e. if we select a radio button, then the already selected radio button should be deselect and new radio button should be selected. Code as follows.
But when I checked in ZTABLE, the field contains only:
Do the implementation for the same class to handle the event i.e. if we select a radio button, then the already selected radio b
Any thing wrong in my code??

Firefox beta 21.0 shortcuts not working os x 10.8.3

All keyboard shortcuts not working.
Keyboard shortcuts working in other apps eg LibreOffice
Am using keyboard shortcut program ikey for OS X - but has worked with FF before.
THanks

Hello,
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you.

Safari keyboard shortcut not working

Hi
Safari keyboard shortcut not working right.
I have 6 website in favourite bookmark. When press cmd + 1 should load 1st website in favourite folder. Nothing happen. Same cmd + 2, cmd + 3 etc.
Now cmd + 1 keep add ':)' smiley text emotion instead.
I have reset keyboard shortcut default in System Preference Keyboard but nothing change.

From your Safari menu bar click Safari > Preferences then select the Privacy tab.
Click: Remove All Website Data
Then delete the cache.
Open a Finder window. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following
~/Library/Caches/com.apple.Safari/Cache.db
Click Go then move the Cache.db file to the Trash.
Quit and relaunch Safari to test.

Photoshop: full screen mode shortcut not working

photoshop: full screen mode shortcut not working, if i press shirt+alt+ctr key then i delete the file, what happen ?

Could you elaborate?
F is the default shorcut for »Change Screen Mode« for me, so I’m not sure what you want with the qualifier keys.
Have you changed your Edit > Keyboard Shortcut?

[svn] 4323: Bug: LCDS-544 - Scenario where two components have seperate channel sets with overlapping channels not working .

Revision: 4323
Author: [email protected]
Date: 2008-12-15 19:23:10 -0800 (Mon, 15 Dec 2008)
Log Message:
Bug: LCDS-544 - Scenario where two components have seperate channel sets with overlapping channels not working.
QA: Yes
Doc: No
Checkintests Pass: Yes
Details:
* Hunting to a new channel within a channelset never triggered a disconnect from the previous channel(s). This isn't a problem in general, but does becomes a problem when an app defines two distinct channelsets containing at least one shared channel at the head of the list. In this case, the first channelset hunts past it and connects on a later channel. But when the second channelset hunts through (triggering a connect fault when it hits that initial shared channel that can't connect), the fault is processed by the first channelset as well (incorrectly).
Ticket Links:
http://bugs.adobe.com/jira/browse/LCDS-544
Modified Paths:
flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/ChannelSet.as

Running the script by python2 solves it for me:
su - mythtv -c "nice -n 19 python2 /usr/bin/tv_grab_nl_py --output ~/listings.xml"
Best regards,
Cedric

Set work area shortcut not working Premiere CC

Similar Messages

Maybe you are looking for