Set xrandr to share crtc

Hello archers, especially xrandr experts!
Do you know, how to force xrandr to share crtc between more outputs? I have only two crtc (0 and 1) and 3 identical displays. Two of them are connected via DP and one via VGA. Theoretically, it should be possible to enable all three displays by sharing crtc between these two DP.
Configuration:
Lenovo Thinkpad x220 + Ultradock which has 2xDP and 1xVGA.
I think that the key is to tell xrandr to set the Clones value to share one CRTC but cannot figure out how.
Last edited by asch (2013-11-26 23:36:29)

Hi,
I think it's impossible to do.
I've had a similar problem with my GPU last year. The problem was basically just that the max. supported Outputs was 2 Screens.
And I think on a Notebook, even if it's a Thinkpad, it is impossible as well.

Similar Messages

  • How do I set up family share for 2 iPhones 2 iPads 2 iPods and 1laptop?

    My husband, son, and I cannot figure out how to set up family share. we have 7 devices between the 3 of us. we each have iTunes accounts, but we faked my sons birthday because he is 7. How can I set it up for all of us to share music,
    photos etc?

    Creating an iCloud account- Frequently Asked Questions
    Apple IDs and iCloud

  • How do I set up a share on my buffalo Linkstation Live 2 TB

    Can anyone please help me?
    How do I set up a share with my Buffalo Linkstation live so that I can use it for my iTunes library?

    download the setup guide from here and follow the instructions.

  • If you have an itunes acct that was not set up to share and the lap top it was on is no longer working, is there a way to open up the old itunes acct to get music and photos?  This was before icloud was available, can you reset your password?

    If you have an itunes acct that was not set up to share and the lap top it was on is no longer working, is there a way to open up the old itunes acct to get music and photos off of it?  This was before Icloud was available.  Can you reset your itunes password somehow?

    iTunes and the iTunes Store won't have anything to do with your photos. Those would be stored only on your laptop unless you made a backup of some sort. If you didn't, and the hard drive in your laptop has failed, then your photos are gone unless you wish to pay a disk recovery service a lot of money to try and get them back.
    As to your music, if you purchased it from the iTunes Store you can probably re-download it. Go to the iTunes Store, log into your account, and click the Purchases link under the Quick Links. From there you should be able to re-download some or all of your purchased content. Note that not all content has been licensed for re-downloading in all countries at this time. You can see what content you can download here:
    http://support.apple.com/kb/HT5085
    You can also re-download content using an iOS device.
    For full instructions, see:
    http://support.apple.com/kb/ht2519
    Regards.

  • When I try to "set up" to share iPhotos on Facebook, I get the message "try later."  What is this and how do I resolve it?

    When I try to "set up" to share iPhotos on Facebook, I get the message "try later."  What is this and how do I resolve it?Setting

    Same issue here... used to work fine, now when I try to set up to publish photos to Facebook, the "Please try again later" message comes up in the pop-up window instead of the Facebook login.  It just started doing this last week.

  • I set up family share but do not see any shared content

    I set up Family share and can see my wife's name listed but there is no shared content, specifically iBooks.

    Hey Adolman44,
    Thanks for the question. The following resource may provide a solution:
    If you don't see your family's shared content
    http://support.apple.com/kb/TS5449
    Thanks,
    Matt M.

  • Whilst setting up home share on my husband's laptop was quite easy I can't find a home page on iTunes on my new iPad to do it?

    Whilst setting up home share on my husband's laptop was quite easy I can't find a home page on iTunes on my new iPad to do it?

    The ID you use for home sharing should be the same on all devices, it doesn't need to be the same ID you use for other things.
    So if together you have the ID's [email protected] and [email protected] (say) then you might use [email protected] for your iTunes Store account and [email protected] for home sharing and he might use [email protected] for his iTunes Store account and [email protected] for home sharing

  • I just set up family share, but my kids show up as adults using their existing Apple ids. I want their statis to be child so I can set some parameters. Can this be changed?

    I Just set up family share using my children's existing Apple ids. But theit statis show up as adult, is there a way to change this?

    No, it's only with family sharing that child accounts can now be created (by the family organiser), you can't change existing accounts to be child accounts. You will either have to keep them with their existing adult accounts, or you can create new child accounts for them : Family Sharing and Apple IDs for kids - Apple Support

  • [Solved] networking to pc, need help setting up a share

    im trying to set up a file share, i right click on my user directory, which is mounted on an alternate partition, and i go to sharing, then i set it to share, it asks me for a password, and offers me to ignore as well, but either way, once i enter the root password, or hit ignore, it does nothing.  is something broken, or am i missing permissions, or an installation of another module? 
      i have samba installed, but i didnt change the default config, i might have changed one line, ill have to check tomorrow when im back on the box. i just copied the samba.conf.default to samba.conf.
    note, i do have the pc's listed inside the workgroups when navigating through samba in the network file manager.
    Last edited by wolfdogg (2011-05-31 22:49:32)

    i have been pouring through documentation in the days past to get this far.  i thought i was doing pretty good honestly.  how much documentation do i ahve to read?  i got it installed.  once something is installed, and i click a feature and nothing happens, are you suggesting that i go back to the books?  and if so, at what point in your opinion warrants asking for help? 
    edit
    somehow i got it fixed, wish i could add details
    Last edited by wolfdogg (2011-05-31 22:51:12)

  • I set up home share and put my daughters Ipod on it. I went on hft her. Is there any way I can get them back?

    I set up home share and put my daughter Ipod on it. I went on her ipod and deleted all of my contacts. WELL now the only contacts I have are the 9 I left on hers. Please help

    if you have itunes on your PC/MAC sync the replacement iPhone using the last backup from the defective device

  • How to set up myself as family share organizer with my own Apple id when someone else has gotten a new phone and used my Apple ID on it and set up family share for themselves?

    its my Apple ID and it's basically been hijacked on a device I dont own and someone else has been set up as family share organizer in my own Apple ID and I can't seem to do anything about it.

    You really need to get the apple id straightened out before you start, or you will pay the price forever!   You have a couple of options.  I assume your dad is cooperating with this project.  I think you are probably right about using his apple account.
    Make sure you have established the second e mail address and that to works.
    Log onto apple.com, and in the upper right, log into the account.  Once in the accout, click on the area where you can change you data, and add the second email address.    Apple wil verify the adress by send it an e mail, and won't do anything further until you respond to an e mail sent to that address, so watch for it.
    After the address is verified, on your accout page, make that address your primary address contact from apple.  That way if apple sends confirmations for apps and things, they will go to the new address, and your mom won't see them.  Then set the pad up using the same aple Id as your dad.  Remember, you have not changed the apple id or the password, you have only changed the e mail address for contact.   ( you can change it back after the surprise)
    The other suggestion...  I have given a coule of pads to folks, and one of the real fun parts for them and for you is o
    Ending the box, and doing the set up.  It is a great way for them to learn enough to use it.  Press the buttons etc.  pick their own apps.  You can gift her all the apps you want, and she can learn how to download them herself.
    I gave a pad to mom in law, and did pretty much what you are planning, and at the end of the day, having it all set when she openied it made it harder for her to learn, rather than easier.
    But you are doing a god thing, and I am sure she will enjoy the pad.

  • How to set NTFS and share permissions for Users share for home directories in Server 2012

    I have a new Server 2012 server, and I want to set up a Users share, that will contain subfolders of each user's username and contain their home directory.  But what do I set the share and NTFS permissions as on the root level, lets call the folder
    Users? Is the following older article the correct permissions I need?
    https://support.microsoft.com/kb/274443

    Hi RJO22,
    You can choose configure the Folder Redirection, Folder Redirection enables you to redirect the location of specific folders within user profiles to a new location, such as
    a shared network location. Folder redirection is used in the process of administering user profiles and roaming user profiles. You can configure Folder Redirection using the Group Policy Management Console to redirect specific user profile folders, as well
    as edit Folder Redirection policy settings.
    The related KB:
    Folder Redirection Overview
    http://technet.microsoft.com/en-us/library/cc732275.aspx
    Specify the Location of Folders in a User Profile
    http://technet.microsoft.com/en-us/library/cc771969.aspx
    I’m glad to be of help to you!
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Failure of ACL setting for CIFS share resource on Windows client logined with administrator account

    Hi,
      We accounter a puzzle of ACL setting for a CIFS share resource. In our application, we use the
    administrator account to login a Windows 7 OS which is used as the CIFS client. We can access the share resource by "\\server_ip" on  this CIFS client,  but we can't add
    a new ACE to the ACL of a CIFS share resource provided by a CIFS server.
    Why dose this hanppen? Note that the CIFS server maybe a Windows OS or a self-developed CIFS server. 
      The operation details as followed:
    1.Access the share resource by "\\server_ip", login the CIFS server by a valid account on the CIFS server.
    2.On the Windows client, select the "Security" panel in the mouse-right-button properties dialog of a cifs share resource.
    3.To add a new ACE for someone eg. user0, we input "user0" in the "Select Users ans Groups" dialog popped up.
    4.Click OK, but the Windows client will not get the user information for user0 from the CIFS server.
    WHY?
    5.By wireshare network trace, we find the Windows client didn't send any SAMR requests to the CIFS server.
    6.Restart the Windows client OS and login again with another account except administrator, carry out the above operations. We find that the Windows client can get the user information, opposite with the step 4 above.
    WHY?
    7.By wireshare network trace, we find that the Windows client has sent SAMR requests to the CIFS server to get user informations. But that is different from step 5,  WHY?
    If the Windows client OS is login with administrator account, is there any configuration on Windows client to decide whether request user information on CIFS server when setting ACL for CIFS share resource?
    Expect your help.Thanks.
    Best wishes.

    The purpose of this forum is to support the Open Specifications documentation. You can read about the Microsoft Open Specifications program here,
    http://www.microsoft.com/openspecifications/en/us/default.aspx
    The library of Open Specification documents is located here,
    http://msdn.microsoft.com/en-us/library/dd208104.aspx
    It doesn’t appear that you are implementing one of the protocols cited.  Your question may be more applicable to Technet's Windows Server Platform Networking forum at
    https://social.technet.microsoft.com/Forums/en-US/home?forum=winserverPN or the File Services and Storage forum at
    https://social.technet.microsoft.com/Forums/en-US/home?forum=winserverfiles.
    If you are working on implementing a protocol using the specifications cidet above, please provide more detail.
    Bryan S. Burgin Senior Escalation Engineer Microsoft Protocol Open Specifications Team

  • Lanovo ix4 300d and european character set for samba shares

    Hi,
    I am installing a couple of IX4-300d at a client site, struggling to set and fix the samba character set for the Windows shares. Here in Italy everyone is used to put western european characters into filenames (for example è ò ° €) but the NAS acts wierdly when it finds such caracters in folder names and file names.
    As you know samba gives the possibility to declare dos charset= ISO8859-1 and unix charset= ISO8859-1 in the smb.conf file but the option is not present in the IX4 setup pages.
    Is there an easy way to circumvent the problem and fix this option? As it is now the machine is fearly useless, at least if you need to migrate files and folder from a server or storage with ISO8859 charset already applied.
    thanks a lot
    np
    Solved!
    Go to Solution.

    This issue has been raised on all iomega drives since day 1. although 'documented' it is still shame, that units sold to 'r-o-w' means rest-of-world, outside US, are stuckto Aa-Zz09 basically wheras client systems ( windows, linux, ios ) don't care and take what they are supposed to do.
    Take it or leave it. ( I mean, take another vendor), I do not believe someone ever has taken that seriously or will do it......
    Various PCs / Laptops ( sorry I still really love Dell and Fujitsu ;-))
    Supporting Customers ix2s and ix4s -- Love Networking ( not only technically ).
    I am not a Lenovo Employee.
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!

  • How can I add my photo after setting up family share

    I Set family share as organizer and did not add a picture can i now add my picture.

    Hello there, bryan1953.
    The photo used by Family Sharing is based on your Contact card in Contacts. The following Knowledge Base article walks through how to add a photo:
    Contacts: Add or change contact pictures
    http://support.apple.com/kb/PH11580
    Add or change a picture
    Select a contact or your own card, and then double-click the picture well.
    Select a picture:
    Drag an image to the picture well.
    Click Camera to take a picture.
    If you have pictures in iPhoto, click the Faces button to use a face from iPhoto.
    If the contact is linked (it’s in multiple accounts, but displayed only once in Contacts) and has multiple account pictures, click Linked.
    Click Edit to edit the picture.
    To zoom in and out of the picture, drag the slider. Drag the picture to change which part of it is visible.
    To rotate the picture, hold down the Option key while you click and drag the picture.
    To apply special effects, click the Effects Gallery button and choose an effect.
    Click Done.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

Maybe you are looking for