SetDpmServer failed with errorcode =0x80070005, error says: Access is denied.
We have a Windows 2008 R2 server that we need to move it's protection from one DPM server (DPM2) to another DPM server (DPMTEST1)
We logon onto the Agent server (one being protected) with with my own Domain Admin account, (Not the Domain Administrator Account) an run the following command: and get Access denied.
C:\Program Files\Microsoft Data Protection Manager\DPM\bin>SetDpmServer.exe -dpmserverName DPMTEST1
Configuring dpm server settings and firewall settings for dpm server =[DPMTEST1]
Configuring dpm server settings and firewall settings for dpm server =[wellspan.org\DPMTEST1]
SetDpmServer failed with errorcode =0x80070005, error says: Access is denied.
Please make sure that you are a domain user with administrator privileges on this computer
If I log out and back in with the Domain Administrators account and run the same command. It completes successfully.
My own Domain account has administrator privi's to all servers.
I'm not sure what I'm missing and what would cause this.
Any help would greatly appreciated.
Rick
Rick Dixon
I have this issue on a Domain Controller.
Local Admin doesn't help but i am Domain admin.
any further advice ?
Similar Messages
-
I installed Exchange Server 2010 inside my VMWare Windows Server 2008 Ent R2. And After successful installation when I try to open my Exchange Server Console, I am getting the following error message. I am very new to Exchange server please help me
to solve this problem.
Initialization Failed
The following error occurred while searching for the on-premises Exchange server:
[win-.local] Connecting to remote server failed with the following error message : Access is denied. For more information, see the about_Remote_Troubleshooting Help topic. It was running the command 'Discover-ExchangeServer -UseWIA $true -SuppressError
$true -CurrentVersion 'Version 14.1 (Build 218.15)''.
Thanks Vivek
SharePoint Foundation 2010 Book
http://www.redpipit.comHi,
Please have a look at the article below:
Troubleshooting Exchange 2010 Management Tools startup issues
http://blogs.technet.com/b/exchange/archive/2010/02/04/3409289.aspx
Resolving WinRM errors and Exchange 2010 Management tools startup failures
http://blogs.technet.com/b/exchange/archive/2010/12/07/3411644.aspx
Besides, please run the cmdlet below:
set-user alias -remotepowershellenabled$true
Xiu Zhang
TechNet Community Support -
DPM Agent Installer Fails with errorcode =0x80070643
I've seen this all over the place. Sometimes it's with DPM 2007 but I'm using an evaluation version of DPM 2010. I'm trying to install the agent on a protected server running Windows
2008 Standard with Service Pack 2. This is our Exchange 2007 server and is also running ForeFront.
I initially tried installing from the DPM server and received the following error code
Install protection agent on PS failed:
Error 313: The agent operation failed because an error occurred while running the installation program on PS.
Error details: Fatal error during installation (0x80070643)
Recommended action: Review the log files on PS: [windir]\temp\msdpm*.log and take appropriate action. Retry the operation, and if the error persists, restart the computer
and then retry the operation again.
I reviewed the error logs but I didn't know exactly what to look for and I don't see anything that jumps out at me.
On other sites I have seen instructions for a manual install on the protected server after disabeling the firewall and so I tried that.
On the protected server I mapped a drive to the folder containing the agent on the DPM server. I ran Net stop mpssvc. Then I launched the installer DPMAgentInstaller_x64.exe. When
I ran that I received a different error.
DPMAgentInstaller failed with errorcode =0x80070643, error says: Fatal error during installation.
Check log files in [WINDIR]temp\MSDPM*.LOG
Press Enter key to close the window
I rebooted and tried again with the same error.
On another page I read that someone asked about the paging file so I verified that there was sufficient space allocated (only 2/3 of the allocated space is being used).
Our primary partition has over 50GB of free space and our data partition has over 370 GB free.
I can post sections of the log files if that would help.
ThanksDan,
This is usually a problem with the installer. I've seen this in DPMRA.msi installation failures when In some instances the default permissions of the scheduled tasks directory altered.
The following is a sample from the failing MSDPMAgentBoostrap0Curr.errlog file.
WARNING Failed: Hr: = [0x80070424] : F: lVal : (HANDLE)(schService = OpenServiceW( schSCManager, strServiceName.PeekStr(), (0x00010000L) | 0x0020 | 0x0004 | 0x0002))
WARNING Failed: Hr: = [0x80070424] DeleteServiceByName for service[DPMClientService] failed
WARNING Failed: Hr: = [0x80070002] : Error while deleting the Scheduled Task [ScheduledDPMClientBackup]
WARNING Failed: Hr: = [0x80070002] DeleteScheduledTaskByName failed
WARNING Failed: Hr: = [0x80070005] : F: lVal : pTaskScheduler->NewWorkItem(pwszClientTaskName, CLSID_CTask, IID_ITask, (IUnknown**)&pTask)
WARNING Failed: Hr: = [0x80070005] AddScheduledTaskForClient failed
The service deletion failure is fine since it fails with 0x80070424 (ERROR_SERVICE_DOES_NOT_EXIST - The specified service does not exist as an installed service). The same goes with the scheduled task deletion with the error 0x80070002 (ERROR_FILE_NOT_FOUND
- The system cannot find the file specified). The installer was removing old services or tasks that may be lingering and if they do not exist we will get the above errors.
The access is denied error on the task creation is the aberration that must be addressed.
The permissions on %windir%\Tasks need to allow write access to the account doing the DPMRA.msi install.
Some have implemented group policies to lock down the permissions on the Tasks directory. This was done to combat the Conficker worm. Please see
KB 962007 Virus alert about the Win32/Conficker worm for more details.
Note: You must reset the default permissions on the Task directory. See the "After the environment is fully cleaned" section of the KB article.
If not this let us know.
/Steve
Steve L [MSFT] This posting is provided "AS IS" with no warranties, and confers no rights. -
DPMAgentInstaller failed with errorcode =0x80070643
I've been looking all over the place for an answer to this. I've found lots of postings about it, but no answers that work for me.
I recently upgraded from System Center DPM 2012 SP1 to 2012 R2. I've been upgrading all the clients. I've done it successfully on Windows 2012, Windows 2008, and Windows 7 computers. But I've run into one computer that I cannot upgrade. It's a Windows 7
computer. I've tried to install the new client from the Win 7 computer itself. I've tried it with the old client installed and after uninstalling the old client. Every attempt to get the new client installed yields this error:
"DPMAgentInstaller failed with errorcode =0x80070643, error says: Fatal error during installation."
When I check the logs, the first few lines above "Value 3" are:
NORMAL Received Info message [CustomAction _CheckCertificatesConfigured returned actual error code 1157 (note this may not be 100% accurate if translation happened inside sandbox)]
110C 11B4
02/04 15:36:24.887
06 bootstrapmsihelper.cpp(1322)
NORMAL Received type [0x01000000] message [There is a problem with this Windows Installer package. A DLL required for this install to complete could not be run. Contact your support personnel or package vendor. ]
110C 11B4
02/04 15:36:24.888
06 bootstrapmsihelper.cpp(1304)
NORMAL Received Info message [Action ended 10:36:24: _CheckCertificatesConfigured. Return value 3.]
110C 11B4
02/04 15:36:24.889
06 bootstrapmsihelper.cpp(1304)
NORMAL Received Info message [Action ended 10:36:24: INSTALL. Return value 3.]
110C 11B4
02/04 15:36:24.889
06 bootstrapmsihelper.cpp(1304)
The DPM server is running on Windows Server 2008 R2 Standard.
Any ideas about what is going on?
Thanks,
RobHi Rob,
When installing the agent manually on the client, are you using any parameters? For example, specifying the DPM server?
Kind regards,
Tobias -
I have a SQL 2008 R2 system (10.50.4000) where I'm having problems connecting any user that is not a SysAdmin. Example: I setup a new SQL Login to use Windows Authentication and grant that user db_datareader on the target database. The user attempts
to connect using Excel client or Access or SQL Management Studio and receives Error 18456. The SQL Server Logs shows Error 18456 Severity 14 State 11 Login Failed for user _ Reason Token-based server access validation failed with an infrastructure error.
The strange part is that if I temporarily grant the user the sysadmin server role then the user can connect successfully and retrieve data. But, if I take away that sysadmin server role then the user can no longer connect but again receives the Error
18456 Severity 14 State 11 Login Failed for user _ Reason Token-based server access validation failed with an infrastructure error.
We've turned off UAC on the client machine to see if that was the problem, but no change.
I have dropped and re-added the user's SQL Login (and the related database user login info). No success.
The Ring Buffers output shows:
The Calling API Name: LookupAccountSidInternal
API Name: LookupAccountSid
Error Code: 0x534
Thanks for any help.
-WaltYes, you understand correctly. The user is logging onto a workstation (not the server) with a Windows Authenticated id. The user is using either Excel or Access or SSMS and connecting to the server using a Windows Authenticated SQL Login account.
If the account has sysadmin role (which is only for testing) then the connection is successful. If I take away sysadmin role from the account then the connection is unsuccessful and the SQL Server Log shows Error
18456 Severity 14 State 11 Login Failed for user _ Reason Token-based server access validation failed with an infrastructure error.
(SQL Authentication is not an option here. I must use Windows Authentication).
Any other troubleshooting assistance you can offer would be appreciated. Thanks.
-Walt -
Token-based server access validation failed with an infrastructure error
Hi
We have a new Win 2008 Enterprise x64 server running SQL 2008
When we try to connect to the server using Windows Authentication, from a user account which is a domain administrator, we get the following message:
"Token-based server access validation failed with an infrastructure error"
What needs to be configured here for this to work ?
Thanks
BruceHi,
I am encountering the same error message but it is more around the login, this problem happens only on one server but it is fine on another three, my investigation show it is a ghost SID associated with AD user account
Background
1- An Active Directory (AD) account was created for a user [Domain\UserA]
2- A SQL login was created for the account above and then granted access to a number of databases
3- The AD account was renamed/modified to [Domain\UserB]
At this stage the user would encounter an error when connecting to the server
The sql log show this error message
Error: 18456, Severity: 14, State: 11.
Message
Login failed for user 'domain\user'. Reason: Token-based server access validation failed with an infrastructure error. Check for previous errors. [CLIENT: xxx]
Action on Server 1 SQL (the one with the problem)
1- Dropped the user from the databases
2- Re-Created the login from the windows account [Domain\UserB]
3- Created the user in the respective databases
But the user still unable to connect to the server
Investigation
On server 1, the SID of the user in SYSUSERS was Matching SYSLOGINS and matches with result of SUSER_SID(Domain\UserA)
But it does not match the SID in the AD
The rest of the servers all have the correct SIDs
When I use SUSER_SNAME(Incorrect-Sid) and SUSER_SNAME(Correct-Sid) on this server they both return [Domain\UserB]
The problematic server is always returning the incorrect SID when recreating the user login and when using SUSER_SID(Domain\UserA) as if it is cached somewhere.
I can't specify the SID when creating the SQL login because it is using the Windows account
Your ideas on how to fix this problem are much appreciated
Regards,
DGL -
Windows 8 USB recovery fails with CTOERROR.flg error
Windows 8 recovery using HP supplied USB recovery device failed with CTOERROR.flg error.
[22:53:29.29] ChkErrBB.CMD : Detect some error during PININST_BBV.
[22:53:29.31] ChkErrBB.CMD : Check c:\system.sav\logs\BurnBootWarn.log
[22:53:29.31] ChkErrBB.CMD : or, check c:\system.sav\logs\BurnBootMerge.log
I have tried all the scenarios which are described in this forum but no success.
Can anyone suggest to which date should i reset the BIOS or anyother workarounds??
I have run diagnostic tests on Memory and Disks and both are fine.
* There is a big problem with the HP recovery manager which fails to recover windows. Many have reported in this forum and other forums....but HP has failed to attend this issue and fix the problem in their recovery manger or atleast show a workaround to restore the windows.
My laptop was drastically slow after the reinstall from the HP support.....and now when i decided to reset and recover the windows.....it fails. Unfortunately my laptop is out of warranty.
This is pushing me away from any HP and will never ever buy or recommend anyone to buy a HP product.
History about previous issue with this laptop:
Order # BDRN598901
Order # BDTP356101
* I had an issue with the HP recovery manager in creating recovery disc. I did contact the HP support as my warranty was still in place. They took my laptop and reinstalled the OS and sent it back to me.
Even after that i could not create a recovery disk and they send me a USB recovery device.
Service Order Product Service Event Order Status Estimated Delivery Date *MM/DD/YYYY Track this Shipment
BDTP356101 USB - WINDOWS 8 64B RECOVERY KIT SW FULFILLMENT POSTAL DELIVERY GROUND Shipped 05/05/2014 POSTAL SERVICE (STANDARD)
Service Order Product Service Event Order Status Estimated Delivery Date *MM/DD/YYYY Track this Shipment BDRN598901 HP ENVY 4-1115DX TouchSmart Ultrabook BOX PLUS PICKUP & REPAIR, 2 DAY SHIPPING Shipped 04/30/2014 FED-EX NEXT DAY (AFTERNOON)
Thanks,
KB29Set the date in BIOS to 1/02/2012. Save & Exit. Boot with Recovery, let it run through the process- but on the first reboot initiated by recovery enter BIOS again to insure date is still set to 2012. If not change it again, then let recovery resume.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others** -
I had a problem with the hard disk on a 13" 2010 macbook pro. Replaced the hard disk with an Hitachi 1TB disk but when I tried to erase and format, it fails with input/output error and at other times saying unable to allocate memory. Any help much appreciated!
Zap the PRAM and Reset the SMC, then try again.
-
Package failed with run time error: " GETWA_NOT_ASSIGNED".
Hi,
One of our custom package is failing with run time error " GETWA_NOT_ASSIGNED". We are getting this error after refresh. Infact this package is working fine both in production and Dev, but in QA system it giving runtime error.
Here with I am pasting run time error details. Please see...If any one have any idea or clue or if you have faced this kind of error.
Thanks is advance.
Error Details.
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_UJK_CUSTOM_LOGIC===========CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
You attempted to access an unassigned field symbol
(data segment 32774).
This error may occur if
- You address a typed field symbol before it has been set with
ASSIGN
- You address a field symbol that pointed to the line of an
internal table that was deleted
- You address a field symbol that was previously reset using
UNASSIGN or that pointed to a local field that no
longer exists
- You address a global function interface, although the
respective function module is not active - that is, is
not in the list of active calls. The list of active calls
can be taken from this short dump.
Regards, TrineHi Trine,
the error is about some field you are trying to map using field-simbols, that is diferent in the other system.
Go to the code program in the st22, there you will see when the erros occurs e what field gives the error.
Best Regards,
António -
Backup Fails with Invalid RECID Error
Hi All,
Please help me to understand Caution -section
below text is from
[http://download.oracle.com/docs/cd/B10501_01/server.920/a96566/rcmtroub.htm#447765]
Backup Fails with Invalid RECID Error: Solution 2
This solution is more difficult than solution 1:
To create the control file with SQL*Plus:
1. Connect to the target database with SQL*Plus. For example, enter:
% sqlplus 'SYS/oracle@trgt AS SYSDBA'
2. Mount the database if it is not already mounted:
SQL> ALTER DATABASE MOUNT;
3. Back up the control file to a trace file:
SQL> ALTER DATABASE BACKUP CONTROLFILE TO TRACE;
4. Edit the trace file as necessary. The relevant section of the trace file looks something like the following:
# The following commands will create a new control file and use it
# to open the database.
# Data used by the recovery manager will be lost. Additional logs may
# be required for media recovery of offline data files. Use this
# only if the current version of all online logs are available.
STARTUP NOMOUNT
CREATE CONTROLFILE REUSE DATABASE "TRGT" NORESETLOGS ARCHIVELOG
-- STANDBY DATABASE CLUSTER CONSISTENT AND UNPROTECTED
MAXLOGFILES 32
MAXLOGMEMBERS 2
MAXDATAFILES 32
MAXINSTANCES 1
MAXLOGHISTORY 226
LOGFILE
GROUP 1 '/oracle/oradata/trgt/redo01.log' SIZE 25M,
GROUP 2 '/oracle/oradata/trgt/redo02.log' SIZE 25M,
GROUP 3 '/oracle/oradata/trgt/redo03.log' SIZE 500K
-- STANDBY LOGFILE
DATAFILE
'/oracle/oradata/trgt/system01.dbf',
'/oracle/oradata/trgt/undotbs01.dbf',
'/oracle/oradata/trgt/cwmlite01.dbf',
'/oracle/oradata/trgt/drsys01.dbf',
'/oracle/oradata/trgt/example01.dbf',
'/oracle/oradata/trgt/indx01.dbf',
'/oracle/oradata/trgt/tools01.dbf',
'/oracle/oradata/trgt/users01.dbf'
CHARACTER SET WE8DEC
# Take files offline to match current control file.
ALTER DATABASE DATAFILE '/oracle/oradata/trgt/tools01.dbf' OFFLINE;
ALTER DATABASE DATAFILE '/oracle/oradata/trgt/users01.dbf' OFFLINE;
# Configure RMAN configuration record 1
VARIABLE RECNO NUMBER;
EXECUTE :RECNO := SYS.DBMS_BACKUP_RESTORE.SETCONFIG('CHANNEL','DEVICE TYPE DISK
DEBUG 255');
# Recovery is required if any of the datafiles are restored backups,
# or if the last shutdown was not normal or immediate.
RECOVER DATABASE
# All logs need archiving and a log switch is needed.
ALTER SYSTEM ARCHIVE LOG ALL;
# Database can now be opened normally.
ALTER DATABASE OPEN;
# Commands to add tempfiles to temporary tablespaces.
# Online tempfiles have complete space information.
# Other tempfiles may require adjustment.
ALTER TABLESPACE TEMP ADD TEMPFILE '/oracle/oradata/trgt/temp01.dbf' REUSE;
# End of tempfile additions.
5. Shut down the database:
SHUTDOWN IMMEDIATE
6. Execute the script to create the control file, recover (if necessary), archive the logs, and open the database:
STARTUP NOMOUNT
CREATE CONTROLFILE ...;
EXECUTE ...;
RECOVER DATABASE
ALTER SYSTEM ARCHIVE LOG CURRENT;
ALTER DATABASE OPEN ...;
Caution:
If you do not open with the RESETLOGS option,
then two copies of an archived redo log for a given log sequence number may
exist--even though these two copies have completely different contents.
For example, one log may have been created on the original host and the other on the new host.
If you accidentally confuse the logs during a media recovery,
then the database will be corrupted but Oracle and RMAN cannot detect the problem.Please help me to understand Caution -section
Caution:
If you do not open with the RESETLOGS option,
then two copies of an archived redo log for a given log sequence number may
exist--even though these two copies have completely different contents.
For example, one log may have been created on the original host and the other on the new host.
If you accidentally confuse the logs during a media recovery,
then the database will be corrupted but Oracle and RMAN cannot detect the problem.As per my understanding it says. If you don't open database with RESETLOGS option then there may be archived logs with log sequence number which is already archived on the source host. This may happen due to difference in RECIDs. Now when the database needs media recovery for this particular log sequence, you may provide any of them. So in this case, RMAN and Oracle will not be able to differentiate the two files and can accept any of the archived log files during recovery. Since the contents of two archived logs are different, because they are generated at different times and they contains different transactions. So, internally it corrupts your database.
Rgds. -
Hi,
I am trying to install certificate services on a windows 2008 server (R2 ENT SP1) with a PCIe nCipher HSM module installed on it. The version of nCipher SW is = 11.30. It is a RootCA, and I am trying to use a key that is already stored in the HSM (I
have done this before with a PCI HSM (older HW version)). I select “Use existing private key” and “Select an existing private key on this computer” on the wizard, then i change the CSP to nCipher and click on "search" the key I am looking for
appears and I select that one. I repeat, I have done this before and it works with a PCI HSM module.
The installation is finished before being prompted to insert the operator cards, and it ends with two errors:
<Error>: Active Directory Certificate Services setup failed with the following error: Overlapped I/O operation is in progress. 0x800703e5 (WIN32: 997)
And:
<Error>: Active Directory Certificate Services setup failed with the following error: The group or resource is not in the correct state to perform the requested operation.
0x8007139f (WIN32: 5023)
The servermanager.log says:
1856: 2014-07-23 18:27:48.195 [CAManager] Sync: Validity period units: Years
1856: 2014-07-23 18:27:48.928 [Provider] Error (Id=0) System.Runtime.InteropServices.COMException (0x800703E5): CCertSrvSetup::Install: Overlapped I/O operation is in progress. 0x800703e5 (WIN32: 997)
at Microsoft.CertificateServices.Setup.Interop.CCertSrvSetupClass.Install()
at Microsoft.Windows.ServerManager.CertificateServer.CertificateServerRoleProvider.Configure(InstallableFeatureInformation featureInfo, DiscoveryResult discoveryResult, ChangeTracker changeTracker)
1856: 2014-07-23 18:27:48.928 [Provider] CAErrorID: 0, CAErrorString: 'Active Directory Certificate Services setup failed with the following error: Overlapped I/O operation is in progress.
0x800703e5 (WIN32: 997)'
1856: 2014-07-23 18:27:48.928 [Provider] Adding error message.
1856: 2014-07-23 18:27:48.928 [Provider] [STAT] For 'Certification Authority':
And:
1856: 2014-07-23 18:27:49.053 [CAWebProxyManager] Sync: Initializing defaults
1856: 2014-07-23 18:27:49.162 [Provider] Error (Id=0) System.Runtime.InteropServices.COMException (0x8007139F): CCertSrvSetup::Install: The group or resource is not in the correct state to perform the requested operation. 0x8007139f (WIN32: 5023)
at Microsoft.CertificateServices.Setup.Interop.CCertSrvSetupClass.Install()
at Microsoft.Windows.ServerManager.CertificateServer.CertificateServerRoleProvider.Configure(InstallableFeatureInformation featureInfo, DiscoveryResult discoveryResult, ChangeTracker changeTracker)
1856: 2014-07-23 18:27:49.162 [Provider] CAErrorID: 0, CAErrorString: 'Active Directory Certificate Services setup failed with the following error: The group or resource is not in the correct
state to perform the requested operation. 0x8007139f (WIN32: 5023)'
1856: 2014-07-23 18:27:49.162 [Provider] Adding error message.
Has anyone experienced this before? Am I missing something here?
Any help will be very appreciated
Thanks in advance
Best regards
Alejandro Lozano VillanuevaHi, thanks for your support.
I have been playing around a bit with some ncipher commands and found this:
C:\Program Files (x86)\nCipher\nfast\bin>cspcheck.exe
cspcheck: fatal error: File key_mscapi_container-1c44b9424a23f6cddc91e8a065241a0
9aa719e4f (key #1): 0 modules contain the counter (NVRAM file ID 021c44b9424a23f
6cddc91)
cspcheck: information: 2 containers and 2 keys found.
cspcheck: fatal error occurred.
If I perform the same command on the original server (the server with the original kmdata folder and with the running RootCA services):
E:\nfast\bin>cspcheck.exe
cspcheck: information: 2 containers and 2 keys found.
cspcheck: everything seems to be in order.
Strange?
Moreover, when I do a csptest.exe command (also on both servers, i find this)
On the new server:
C:\Program Files (x86)\nCipher\nfast\bin>csptest.exe
nCipher CSP test software
=========================
Found the nCipher domestic CSP named 'nCipher Enhanced Cryptographic Provider'
Provider name: nCipher Enhanced Cryptographic Provider
Version number: 1.48
User key containers:
Container 'csptest.exe' has no stored keys.
Container 'Administrator' has no stored keys.
Machine key containers:
Container '352dd28a-17cb-4c6f-b6e4-bf39bcf75db5' has a 2048-bit signature key.
Container 'ROOTCA' has no stored keys.
Container 'csptest.exe' has no stored keys.
While in the old server:
E:\nfast\bin>csptest.exe
nCipher CSP test software
=========================
Found the nCipher domestic CSP named 'nCipher Enhanced Cryptographic Provider'
Provider name: nCipher Enhanced Cryptographic Provider
Version number: 1.40
User key containers:
Container 'csptest.exe' has no stored keys.
Machine key containers:
Container '352dd28a-17cb-4c6f-b6e4-bf39bcf75db5' has a 2048-bit signature key.
Container 'ROOTCA' has a 2048-bit signature key.
Container 'csptest.exe' has no stored keys.
As you can see, the container called ROOTCA, which is the one that I use during the installation, says it has no stored keys. While on the old server, it says it contains a key. Why is this happening? I dont know, I am copying the complete
key management folder from one server to another and initialize the security world with that folder as I always do, and i dont have any errors during this procedure.
Do you know what could be the cause of this? or how can I fix this? Thanks a lot, best regards.
Alejandro Lozano Villanueva -
Technician computer is Windows 7 HP x64.
Running latest version of WAIK.
Goal: To make a Winpe disc for each processor architecture (AMD64, x86, IA64) with an included Gimage.exe using this code for the default startnet.cmd file found in system32 directory of winpe boot.wim
wpeinit
if /i %PROCESSOR_ARCHITECTURE%==amd64 (
cd x64
start gimagex.exe
if /i %PROCESSOR_ARCHITECTURE%==ia64 (
cd x64
start gimagex.exe
if /i %PROCESSOR_ARCHITECTURE%==x86 (
cd x86
start gimagex.exe
These are the commands I have processed for the x86 variant:
copype x86 c:\pe\x86\
Dism /mount-wim /wimfile:C:\pe\x86\winpe.wim /index:1 /mountdir:C:\mount
**It is at this point I copy over my x86 folder, x64 folder, and overwrite the startnet.cmd file.
dism /unmount-wim /mountdir:C:\mount /commit
oscdimg -n bc:\pe\x86\etfsboot.com c:\pe\x86\iso c:\pe\x86.iso
^^It is at this command I receive this error:
ERROR: Could not delete existing file "c:\pe\x86\iso"
Error 5: Access is denied.
Please note that all commands before were hand-typed, no copy or pasting from any directory or .chm
One thread referred to some Application Management service, but I can report that there is no such service installed in my machine.
Thank You!
UPDATE:
I copied the winpe.wim file from the x86 root directory into the iso directory and renamed it to boot.wim Now, if I copy the contents to a flash drive and put it into a client
computer, it boots to the PE perfectly, script and all.
However, when trying to use the oscdimg command, I do get an .iso successfully, but when I burn it, I don't know what to do in the way of boot options, and if I keep defaults (imgburn)
it results in an un-bootable dvd.
Suggestions are greatly appreciated.Don't copy and paste instead type manually it will work.
[email protected]
OMG! Yes, you are correct ... but I have no idea why! I retyped the command line:
oscdimg -n -be:\winpe_amd64\etfsboot.com e:\winpe_amd64\ISO e:\winpe_amd64\winpe_amd64.iso
into Notepad, and then pasted it into the Command Prompt, and it worked!
Perhaps there must be some hidden characters included when pasting directly, even though I first pasted the command line into Notepad, and then into Command Prompt
(C:\Program Files\Windows AIK\Tools\PETools>).
I had to retype the command line in Notepad before copying and pasting, before it would work.
Wow, thanks!
Cheers, Navy Flyer -
Windows 2008 R2 backup fails with event 521 error code 2155348001
Windows Server 2008 R2 SP1. Hyper-V role installed.
OS on drive C. All VMs stored on Drive D.
I am attempting to run a Bare Metal backup of the host system to a network share.
Drive D is not included in the backup job. I am getting the following error:
Log Name: Application
Source: Microsoft-Windows-Backup
Date: 1/10/2014 11:28:52 PM
Event ID: 521
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: SHAQTUS.scdl.local
Description:
The backup operation that started at '2014-01-11T04:08:50.683000000Z' has failed because the Volume Shadow Copy Service operation to create a shadow copy of the volumes being backed up failed with following error code '2155348001'. Please review the event
details for a solution, and then rerun the backup operation once the issue is resolved.
Reviewing event details, as suggested, does not offer any solution.
I have tried the suggested solutions in other similar threads of increasing the timeout value with the registry entry.
This does not work.
I have not tried reregistering the VSS writers manually, as the only links I have found are for server 2003/2008 (not R2) and explicitly state that they won’t work on higher versions of the OS, since they now utilize manifests and the manual procedure could
cause problems for those servers. Haven't found similar procedures for 2008 R2.
I have been able to narrow this down a bit.
A Windows 2008 R2 SP1 server with Hyper-V installed – backup to a network share is successful;
Install the DPM 2012 agent – same backup fails with the 2155348001 error.
We use DPM 2012 to backup VMs, but DPM cannot perform a bare metal backup/restore of server and the 2012 version no longer has the DPMSRT feature.
I prefer to run Bare Metal Backup to a file server share.
Stuck on this one.
RickHi,
The issue is related to DPM, I would suggest you ask for help from DPM forums:
http://social.technet.microsoft.com/Forums/en-US/home?forum=dataprotectionmanager
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Hi!
We have 5 Exchange 2013 servers and when I’m trying to run a script that includes the cmd-let Get-MessageTrackinglog with StartDate = the first of the month and with EndDate = the end of the month I get the following error message after
a couple of hours. The script is run on the server SERVER01 and goes through the Message Tracking logs of all Exchange servers. I have tried the script on other servers and get the same result.
Processing data for a remote command failed with the following error message: Error occurred during the Kerberos reponse.
[Server=SERVER01, TimeStamp = 918/2014 19:32:34]
For more information, see the about_Remote_Troubleshooting Help topic.
+ CategoryInfo
: OperationStopped: (server01.domain.com:String) [], PSRemotingTransportException
+ FullyQualifiedErrorId : JobFailure
+ PSComputerName
: server01.domain.com
I have gone through “about_Remote_Troubleshooting Help topic”, but can’t find anything related to my issue. There is nothing in the Application or the Windows PowerShell log either.
/HenrikHi Henado
Check the time on your Exchange server(s) relative to the DCs and ensure they are in correct sync
Use another account which is assigned the Organization Management permission and log to to the server run the command in shell and see the results
Run
Add-PSSnapin -Name Microsoft.Exchange.Management.PowerShell.E2010
Set-Adserversettings -ViewEntireForest $True and then run message tracking command and see the results
If none of the above helps you may need to remove and re-install the WinRM and see the results
Good Luck :)
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com -
Background job failing with license check error
Hi Experts
In our ERP 6.0 system ,all the background jobs are failing with license check error.
Have checked the license in SLICENSE and the license is fine.
There is no warning while users are loggign in ,but when any background job is runing its failing with error
Job started
Logon not possible (error in license check)
Job cancelled after system exception ERROR_MESSAGE
Also performed the license test which is failing
F:\usr\sap\XX1\SYS\exe\uc\NTAMD64>saplicense -test pf=F:\usr\sap\XX1\SYS\profile
\XX1_DVEBMGS00_host_xx
Protocol saplicense test:
Read sapsytem name
ok, sapsytem name = XX1
Read message server host
ok, host = hostname
Read message server service port
ok, service port = sapmsXX1
Connect to message server
ok, connect done
Read hardware key from message server
ok, got hardware key
Detach from message server
ok, detached
Check hardware key
ok, hardware key = T0343073854
Connect to database
ok, connected
Check license
ok, check done
Disconnect database
ok, database disconnected
test result: license test failed
LICENSE system: XX1 hardware key: T0343073854 expiration_date:
installation no: key:
userlimit: 0 productid: R3_BASIS
system-nr:
license expired ***
Please suggest how to troubleshoot.
Regards
Ajay@Michael
In SLICENSe the Hardware key field is not BLUE or BLACK and its showing the exact hardware key which i can see at OS level with saplicense -get command.
@Jagadish
Note is good refrence, i reiinstalled the Digitally signed license with saplikey command and it was successful.
But still the license test is failing at OS Level..below is the command prompt output.
===================================================================
F:\usr\sap\XX1\SYS\exe\uc\NTAMD64>saplikey -install C:\license_script_XX.txt pf
=F:\usr\sap\XX\SYS\profile\XX_DVEBMGS00_mngsez148079
SAP License Key Administration - Copyright (C) 2003 SAP AG
2 SAP license key(s) successfully installed.
F:\usr\sap\XX\SYS\exe\uc\NTAMD64>saplicense -test pf=F:\usr\sap\XX1\SYS\profile
\MD1_DVEBMGS00_mngsez148079
Protocol saplicense test:
Read sapsytem name
ok, sapsytem name = XX1
Read message server host
ok, host = host
Read message server service port
ok, service port = sapmsXX1
Connect to message server
ok, connect done
Read hardware key from message server
ok, got hardware key
Detach from message server
ok, detached
Check hardware key
ok, hardware key = T0343073854
Connect to database
ok, connected
Check license
ok, check done
Disconnect database
ok, database disconnected
test result: license test failed
LICENSE system: XX1 hardware key: T0343073854 expiration_date:
installation no: key:
userlimit: 0 productid: R3_BASIS
system-nr:
license expired ***
============================================================
@Juan
The hardware key was changed and we requested a new license with new hardware key,system was runing fine for couple of weeks with all background jiobs for SPAM./SAINT Ok .We performed EHP4 on this system.
But now this issue is here,so i guess we should troubleshoot.
Please let me know any other pointers.
Regards
Ajay
PS In SLICENSE new installed license is fine and all users can login.
Maybe you are looking for
-
Hp officejet pro 8500 wireless a909g scan with Windows 7
I have been using HP officejet pro 8500 a909g wireless with windows xp with no problems scanning. I got a laptop with windows 7 64 bit and cannot scan to the computer from the solution center software on the computer or from the display on the unit
-
Deploy issue from JDeveloper 10.1.3.5 to OAS 10.1.2
I have written an application using ADF on JDeveloper 10.1.3.5 and need to deploy it to our OAS 10.1.2. I have run the adfinstaller on the linux server to upgrade the ADF libraries to the correct versions, updated the web.xml files to have the correc
-
Problem with "Skip when shuffling"
OK I have a 2nd Gen iPod Nano 2gig. I have several audio books that I do not want to come up when I'm shuffling. Each audiobook has it's own playlist and I set them all to "Skip when shuffling". It works fine...until I listen to those audiobooks. The
-
Okay, I've never used the support forum before, so go easy on me... Here's the deal...I built a website using iWeb for my business. I basically took a template and started used the features that come out of iWeb. No editing HTML, just doing everyth
-
JAVA API :: Information needed
Hi. I tought BI Publisher Java API would give me access to the server repository. And then, just execute something like: Report r = Report.newReport("MyReportName"); r.Generate() But as far as I see, It only gives me the possibility yo LOCALLY consum