*** setObjectForKey: object cannot be nil (key: UIImagePickerControllerOriginalImage)
In an app we are subclassing UIImagePickerController to add overlay with some controls. And adding it as childView on the current Controller Class. After a long usage following exception is generated *** setObjectForKey: object cannot be nil (key: UIImagePickerControllerOriginalImage).
This is not coming very frequently. But some users report it after a long usage.
Looks good:
$ md5 CiscoJabberMac-10.6.0.202336.zip
MD5 (CiscoJabberMac-10.6.0.202336.zip) = ba901118d827fdeced56bb06cca171f3
As of download site:
MD5 Checksum:
ba901118d827fdeced56bb06cca171f3
Similar Messages
-
what can be done to avoid getting the following error when trying to delete unused clips in Imovie 09 "the operation could not be completed. *** -[__NSArrayM insertObject:atIndex:]: object cannot be nil" I use to get these type of error messages when trying to delete unsused clips from a large event 60 minutes or longer, but now I get this message when trying to reduce a 4 minute event.
Also, does anyone know if there is a limit to the total amount of space that can be taken up by Projects in Imovie 09
Thanks for any helpZachy,
It goes something like this...
Put your new drive in the enclosure. Use Disk Utility to format it, etc. I'd give it a slightly different name than the original. Let's say you have Old Disk and New Disk as your drive names. Use Carbon Copy Cloner to copy Old Disk to New Disk. Now you should have an exact copy, which you can test by rebooting and holding down the Option key. Choose New Disk from the list and let it boot, make sure all is well.
Shut down and physically swap the drives. Take Old Disk and put it in the enclosure. Now your system has a new disk with a lot more space and you can reformat your old disk and just use it for large files or whatever. -
Preview crashing on several files under Lion "object cannot be nil"
Hi,
with several different files - old and new ones -, Preview simply crashes with the following error message after installing Lion on my MacBook Pro:
2011-08-15 09:16:06.255 Preview[435:60b] An uncaught exception was raised
2011-08-15 09:16:06.256 Preview[435:60b] *** -[__NSArrayM insertObject:atIndex:]: object cannot be nil
2011-08-15 09:16:06.262 Preview[435:60b] (
0 CoreFoundation 0x00007fff8fe25986 __exceptionPreprocess + 198
1 libobjc.A.dylib 0x00007fff95bbed5e objc_exception_throw + 43
2 CoreFoundation 0x00007fff8fdcc818 -[__NSArrayM insertObject:atIndex:] + 296
3 Preview 0x0000000104f46cf9 Preview + 23801
4 Preview 0x0000000104f46a17 Preview + 23063
5 Preview 0x0000000104f465d1 Preview + 21969
6 Preview 0x0000000104f46175 Preview + 20853
7 libdispatch.dylib 0x00007fff9144990a _dispatch_call_block_and_release + 18
8 libdispatch.dylib 0x00007fff9144b77a _dispatch_main_queue_callback_4CF + 308
9 CoreFoundation 0x00007fff8fdbac0c __CFRunLoopRun + 1724
10 CoreFoundation 0x00007fff8fdba216 CFRunLoopRunSpecific + 230
11 HIToolbox 0x00007fff91dfb4ff RunCurrentEventLoopInMode + 277
12 HIToolbox 0x00007fff91e02c21 ReceiveNextEventCommon + 355
13 HIToolbox 0x00007fff91e02aae BlockUntilNextEventMatchingListInMode + 62
14 AppKit 0x00007fff92205191 _DPSNextEvent + 659
15 AppKit 0x00007fff92204a95 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 135
16 AppKit 0x00007fff924baa4d -[NSApplication _realDoModalLoop:peek:] + 610
17 AppKit 0x00007fff924ba681 -[NSApplication runModalForWindow:] + 120
18 AppKit 0x00007fff924adf06 -[NSAlert runModal] + 159
19 AppKit 0x00007fff92233d66 -[NSPersistentUIManager promptToIgnorePersistentState] + 818
20 AppKit 0x00007fff922083dd -[NSApplication _reopenWindowsAsNecessaryIncludingRestorableState:registeringAsReady:completion Handler:] + 173
21 AppKit 0x00007fff92208241 -[NSApplication(NSAppleEventHandling) _handleAEOpenEvent:] + 227
22 AppKit 0x00007fff92207fb1 -[NSApplication(NSAppleEventHandling) _handleCoreEvent:withReplyEvent:] + 330
23 CoreFoundation 0x00007fff8fe17f51 -[NSObject performSelector:withObject:withObject:] + 65
24 Foundation 0x00007fff8c3791c7 __-[NSAppleEventManager setEventHandler:andSelector:forEventClass:andEventID:]_block_invoke_1 + 101
25 Foundation 0x00007fff8c37814e -[NSAppleEventManager dispatchRawAppleEvent:withRawReply:handlerRefCon:] + 283
26 Foundation 0x00007fff8c377fdc _NSAppleEventManagerGenericHandler + 105
27 AE 0x00007fff8cad9a85 _Z20aeDispatchAppleEventPK6AEDescPS_jPh + 200
28 AE 0x00007fff8cad9963 _ZL25dispatchEventAndSendReplyPK6AEDescPS_ + 38
29 AE 0x00007fff8cad9857 aeProcessAppleEvent + 250
30 HIToolbox 0x00007fff91e0a12d AEProcessAppleEvent + 102
31 AppKit 0x00007fff922053dd _DPSNextEvent + 1247
32 AppKit 0x00007fff92204a95 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 135
33 AppKit 0x00007fff922013d6 -[NSApplication run] + 463
34 AppKit 0x00007fff9247f52a NSApplicationMain + 867
35 Preview 0x0000000104f42c64 Preview + 7268
36 ??? 0x0000000000000002 0x0 + 2
2011-08-15 09:16:06.263 Preview[435:60b] *** Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: '*** -[__NSArrayM insertObject:atIndex:]: object cannot be nil'
*** First throw call stack:
0 CoreFoundation 0x00007fff8fe25986 __exceptionPreprocess + 198
1 libobjc.A.dylib 0x00007fff95bbed5e objc_exception_throw + 43
2 CoreFoundation 0x00007fff8fdcc818 -[__NSArrayM insertObject:atIndex:] + 296
3 Preview 0x0000000104f46cf9 Preview + 23801
4 Preview 0x0000000104f46a17 Preview + 23063
5 Preview 0x0000000104f465d1 Preview + 21969
6 Preview 0x0000000104f46175 Preview + 20853
7 libdispatch.dylib 0x00007fff9144990a _dispatch_call_block_and_release + 18
8 libdispatch.dylib 0x00007fff9144b77a _dispatch_main_queue_callback_4CF + 308
9 CoreFoundation 0x00007fff8fdbac0c __CFRunLoopRun + 1724
10 CoreFoundation 0x00007fff8fdba216 CFRunLoopRunSpecific + 230
11 HIToolbox 0x00007fff91dfb4ff RunCurrentEventLoopInMode + 277
12 HIToolbox 0x00007fff91e02c21 ReceiveNextEventCommon + 355
13 HIToolbox 0x00007fff91e02aae BlockUntilNextEventMatchingListInMode + 62
14 AppKit 0x00007fff92205191 _DPSNextEvent + 659
15 AppKit 0x00007fff92204a95 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 135
16 AppKit 0x00007fff924baa4d -[NSApplication _realDoModalLoop:peek:] + 610
17 AppKit 0x00007fff924ba681 -[NSApplication runModalForWindow:] + 120
18 AppKit 0x00007fff924adf06 -[NSAlert runModal] + 159
19 AppKit 0x00007fff92233d66 -[NSPersistentUIManager promptToIgnorePersistentState] + 818
20 AppKit 0x00007fff922083dd -[NSApplication _reopenWindowsAsNecessaryIncludingRestorableState:registeringAsReady:completion Handler:] + 173
21 AppKit 0x00007fff92208241 -[NSApplication(NSAppleEventHandling) _handleAEOpenEvent:] + 227
22 AppKit 0x00007fff92207fb1 -[NSApplication(NSAppleEventHandling) _handleCoreEvent:withReplyEvent:] + 330
23 CoreFoundation 0x00007fff8fe17f51 -[NSObject performSelector:withObject:withObject:] + 65
24 Foundation 0x00007fff8c3791c7 __-[NSAppleEventManager setEventHandler:andSelector:forEventClass:andEventID:]_block_invoke_1 + 101
25 Foundation 0x00007fff8c37814e -[NSAppleEventManager dispatchRawAppleEvent:withRawReply:handlerRefCon:] + 283
26 Foundation 0x00007fff8c377fdc _NSAppleEventManagerGenericHandler + 105
27 AE 0x00007fff8cad9a85 _Z20aeDispatchAppleEventPK6AEDescPS_jPh + 200
28 AE 0x00007fff8cad9963 _ZL25dispatchEventAndSendReplyPK6AEDescPS_ + 38
29 AE 0x00007fff8cad9857 aeProcessAppleEvent + 250
30 HIToolbox 0x00007fff91e0a12d AEProcessAppleEvent + 102
31 AppKit 0x00007fff922053dd _DPSNextEvent + 1247
32 AppKit 0x00007fff92204a95 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 135
33 AppKit 0x00007fff922013d6 -[NSApplication run] + 463
34 AppKit 0x00007fff9247f52a NSApplicationMain + 867
35 Preview 0x0000000104f42c64 Preview + 7268
36 ??? 0x0000000000000002 0x0 + 2
terminate called throwing an exception
I have looked around for tips, but none of them seem to resolve the problem. Any help would be appreciated!I have run some further tests. While I am still not sure what the underlying problem is, here's what happens in an example.
I create a new PDF from LaTeX using MacTeX 2011's pdflatex.
I run "Preview xxx.pdf" from the shell; Preview crashes as stated above.
I run "Preview" from the shell (note: no parameter), click "Don't restore Windows", and then manually open the pdf file inside Preview. The PDF is now shown without problems.
The same happens in many cases if I replace running "Preview xxx.pdf" in the shell by opening the PDF file by double clicking it in Finder.
Strange... -
I have been trying to open my Iphoto and it is keep closing it immediatley after i open, and asks to reopen to send a report to Apple, but still nothing.
i am not sure what to do!!!As a test launch iPhoto with the Option key held down and try to create a new, test library. Can you? If not then try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iPhoto folder (Snow Leopard and Earlier).
or with Lion and Mt. Lion from the User/Library/Containers/com.apple.iPhoto/
Data/Library/Caches/com.apple.iPhoto folder
3 - try to launch iPhoto again.
NOTE 1: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
NOTE 2: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
If the test library will open normally without crashing you need to repair your current library: apply the two fixes below in order as needed:
Fix #1
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
iPhoto 8 (09) and earlier- run the options indicated
iPhoto 9 (11) and later- run Option #4 to rebuild the database
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager (iPhoto 8 or earlier or IPhoto 11 and later) and launch.
2 - click on the Add Library button and select the library you want to add in the selection window..
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the
File ➙ Rebuild Library (iPhoto 8 or earlier)
or
Library ➙ Rebuild Library (iPhoto 9 or later)
menu option to rebuild the library.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT -
Hello,
I am running Service Manager 2012 with the Exchange Connector 3.0 RTM (Re-release Version). The issue I have is that when an e-mail is processed that is trying to update the status or event log of an incident, the Exchange Connector encounters an error
and will not update the object. The Operations Manager log denotes:
Exchange Connector: Unable to process mail item. Subject="Close Ticket: [IRXXXXX]", Error Message=The key value of an object cannot be changed.
This will happen on a seemingly random selection of Incident work items. I cannot correlate them with a specific template, exchange connector, or incident tier queue that could be causing the issue. I can recreate the way a specific ticket
was created and update it through e-mail without issue, and the next ticket can cause the error to trigger.
I have already opened a Microsoft Support Case using our Software Assurance agreement. After a few months of troubleshooting the issue and trying different fixes, Microsoft support said they were unable to fix the problem and that we would need to
purchase Premier support to go further. At this point I thought I would reach out to the community for ideas.
The setup I have for the Exchange connectors is as follows.
I have three separate Exchange connectors set up to three different mailboxes. One Exchange connector processes external support tickets and applies a specific template. Another processes client support tickets and applies a different template.
And the last Exchange connector processes internal tickets and also processes the updates of tickets created by the other two exchange connectors.
Here are the fixes I've attempted so far:
1. Changed the templates that each Exchange connector applies.
2. Changed the management pack that each template is stored in.
3. Checked my management pack(s) for extended classes by searching for Extension="true" (This was also checked by Microsoft support)
4. Deleted each Exchange connector and recreated each connector
5. Deleted each Exchange connector, deleted the management pack, and reinstalled the management pack and connectors
6. Repeated Step 5, deleted Microsoft.SystemCenter.ExchangeConnector.dll and Microsoft.SystemCenter.ExchangeConnector.resources.dll and then installed the Exchange connector Re-release version 3.0 Published 10/7/2013 (which is supposed to address this
issue)
7. Deleted the HealthServiceState folder and restarted the Management Service
I'm not really sure what to do at this point. I've put many hours into customizing my installation to get it working for my organization so reformatting and starting from scratch would be a nightmare scenario. This environment is in production.
I do have a band-aid in place using Orchestrator. Basically I have a monitor task searching for the error message and when it finds one it searches the mailbox for the offending e-mail and applies either the Resolve or Close status change that is requested
from the user. However, I do not have it working to update the ticket if a comment is applied to the incident. If anyone is in this position and needs to know how to apply this Orchestrator task I am willing to provide my workflow.
I am new to the community and am already impressed with the amount of help and effort there is in this forum. I appreciate in advance any help that is provided and am open to any ideas at this point. I can post more information as needed.
Thank you,
JohnYes that is the whole template. However, I did confirm that this is only happening to incidents where either of two situations triggers a runbook to fire and modify the incident. When I remove the activity from the incident it does clear the
issue. For some background the first Runbook Activity set's the first response date when an incident is resolved if the first response value is null. The second assigns the incident to a user upon creation if the title contains assignto:username;
1.)
<ObjectTemplate ID="Template.d33b5bbcaf3c49b18d8b72bc1e5e1ee4" TypeID="IncidentManagement!System.WorkItem.Incident.ProjectionType">
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Incident_Library!System.WorkItem.Incident']/Escalated$">False</Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Incident_Library!System.WorkItem.Incident']/NeedsKnowledgeArticle$">False</Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Incident_Library!System.WorkItem.Incident']/HasCreatedKnowledgeArticle$">False</Property>
<Object Path="$Context/Path[Relationship='CustomSystem_WorkItem_Activity_Library!System.WorkItemContainsActivity' TypeConstraint='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity']$">
<Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/RunbookId$">4085f0da-ab83-48e5-bbe3-1f3b5fa2dc4a</Property>
<Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/TemplateId$">Template.d33b5bbcaf3c49b18d8b72bc1e5e1ee4</Property>
<Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/IsReadyForAutomation$">True</Property>
<Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/PropertyMapping$"><?xml version="1.0" encoding="utf-16"?>
<ParameterMapping xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<ParameterList>
<RunbookParameterItem>
<Name>Get RA Guid</Name>
<Id>344b15effc1a44528e517c5b4227179c</Id>
<Type>String</Type>
<Value>Generic::Id</Value>
<Direction>In</Direction>
<ContextInfo />
</RunbookParameterItem>
</ParameterList>
<RunbookId>4085f0da-ab83-48e5-bbe3-1f3b5fa2dc4a</RunbookId>
</ParameterMapping></Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Activity_Library!System.WorkItem.Activity']/ChildId$">1906</Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Activity_Library!System.WorkItem.Activity']/Status$">$MPElement[Name='CustomSystem_WorkItem_Activity_Library!ActivityStatusEnum.Active']$</Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Activity_Library!System.WorkItem.Activity']/Skip$">False</Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Library!System.WorkItem']/Title$">Set First Response on Resolve</Property>
</Object>
</ObjectTemplate>
2.)
<ObjectTemplate ID="Template.b311e1f9126e4e19bbbbeb65ddb220ba" TypeID="IncidentManagement!System.WorkItem.Incident.ProjectionType">
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Incident_Library!System.WorkItem.Incident']/Escalated$">False</Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Incident_Library!System.WorkItem.Incident']/Status$">$MPElement[Name='CustomSystem_WorkItem_Incident_Library!IncidentStatusEnum.Active']$</Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Incident_Library!System.WorkItem.Incident']/NeedsKnowledgeArticle$">False</Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Incident_Library!System.WorkItem.Incident']/HasCreatedKnowledgeArticle$">False</Property>
<Object Path="$Context/Path[Relationship='CustomSystem_WorkItem_Activity_Library!System.WorkItemContainsActivity' TypeConstraint='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity']$">
<Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/RunbookId$">ca88b13b-861a-4d39-a3cb-fd912d951e35</Property>
<Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/TemplateId$">Template.b311e1f9126e4e19bbbbeb65ddb220ba</Property>
<Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/IsReadyForAutomation$">True</Property>
<Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/PropertyMapping$"><?xml version="1.0" encoding="utf-16"?>
<ParameterMapping xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<ParameterList>
<RunbookParameterItem>
<Name>RA Activity GUID</Name>
<Id>5677d117a0294a2c898a695032f26c72</Id>
<Type>String</Type>
<Value>Generic::Id</Value>
<Direction>In</Direction>
<ContextInfo />
</RunbookParameterItem>
</ParameterList>
<RunbookId>ca88b13b-861a-4d39-a3cb-fd912d951e35</RunbookId>
</ParameterMapping></Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Activity_Library!System.WorkItem.Activity']/ChildId$">1120</Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Activity_Library!System.WorkItem.Activity']/Status$">$MPElement[Name='CustomSystem_WorkItem_Activity_Library!ActivityStatusEnum.Active']$</Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Activity_Library!System.WorkItem.Activity']/Skip$">False</Property>
<Property Path="$Context/Property[Type='WorkItem!System.WorkItem']/Title$">Execute Orchestrator IR - Autoassign</Property>
</Object>
</ObjectTemplate> -
We have been seeing the following 'warnings' in the event log of our BizTalk machine since upgrading to BTS 2006. They seem to occur randomly 6 or 8 times per day.
Does anyone know what this means and what needs to be done to clear it up? we have only one BizTalk server which is running on only one machine.
I am new to BizTalk, so I am unable to find how many tracking host instances running for BizTalk server. Also, can you please let me know that we can configure only one instance for one server/machine?
Source: BAM EventBus Service
Event: 5
Warning Details: Execute batch error. Exception information: TDDS failed to batch execution of streams. SQLServer: bizprod, Database: BizTalkDTADb.Cannot insert duplicate key row in object 'dta_MessageFieldValues'
with unique index 'IX_MessageFieldValues'. The statement has been terminated..Other than ensuring that there exists a separate and single tracking host instance, you're getting an error about duplicate keys.. which implies that you're trying to Create a BAM Activity twice with the same data.
I suggest you have a in-depth examination of the BAM (TPE or API) associated with the orchestration. In TPE ensure that the first binding you select is the "Instance Id" or "Message Id" before going ahead to map the ports or others.
Regards. -
I have migrated my SCCm 2007 environment to SCCM 2012 SP1 CU4.
I noticed in the System Status\Component Status\SMS_STATE_SYSTEM a lot of errors like the one below:
Microsoft SQL Server reported SQL message 2627, severity 14: [23000][2627][Microsoft][SQL Server Native Client 11.0][SQL Server]Violation of PRIMARY KEY constraint 'DeploymentSummary_PK'. Cannot insert duplicate key in object 'dbo.DeploymentSummary'. The duplicate key value is (1, 0, S0220438, 0). : spUpdateClassi
Please refer to your Configuration Manager documentation, SQL Server documentation, or the Microsoft Knowledge Base for further troubleshooting information.
When looking up the deployment ID and recreate the Deployment the problem is solved. But I have 700 packages and don't want to manually do this action on all packages. I think it is related to the migration i did and something went wrong there :-(
Besides it will retriggers the deployment to the clients which is also not preferred.
Is there another way to solve this by e.e.g do something directly in the SQL database tables ?Hi,
It is not supported by Microsoft that do something directly in SQL database.
If you want to do that, you could make a call to CSS.
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Hi,
I am providing support to one of our clients, where we have jobs scheduled to load the data from the tables in the source database to the destination database via SSIS packages. The first time load is a full load where we truncate all the tables in the destination
and load them from the source tables. But from the next day, we perform the incremental load from source to destination, i.e., only modified records fetched using changed tracking concept will be loaded to the destination. After full load, if we run the incremental
load, the job is failing with the error on one of the packages "Violation of PRIMARY KEY constraint. Cannot insert duplicate key in object '<tablename>'. The duplicate key value is <1234>, even though there are no duplicate records. When we
try debugging and running the failing package, it runs successfully. We are not able to figure out why the package fails and when we run the next day it runs successfully. Request you to help me in this regard.
Thank you,
Bala Murali Krishna Medipally.Hi,
I am providing support to one of our clients, where we have jobs scheduled to load the data from the tables in the source database to the destination database via SSIS packages. The first time load is a full load where we truncate all the tables in the destination
and load them from the source tables. But from the next day, we perform the incremental load from source to destination, i.e., only modified records fetched using changed tracking concept will be loaded to the destination. After full load, if we run the incremental
load, the job is failing with the error on one of the packages "Violation of PRIMARY KEY constraint. Cannot insert duplicate key in object '<tablename>'. The duplicate key value is <1234>, even though there are no duplicate records. When we
try debugging and running the failing package, it runs successfully. We are not able to figure out why the package fails and when we run the next day it runs successfully. Request you to help me in this regard.
Thank you,
Bala Murali Krishna Medipally.
I suspect you are trying to insert modified records instead of updating. -
Cannot insert duplicate key row in object
This is a JPA question. The tbHardware table has a PK identity column and a unique non-clustered index on CoxBarcode column.
I have a SFSB in a Seam2.0.0.GA app running on JBoss 4.2.1.GA. I am using flushMode=FlushModeType.MANUAL (Seam specific when beginning a conversation) and that's why you see the flush() reference at the end of the following code snippet.
Query query = entityManager.createNativeQuery("INSERT INTO tbHardware "+
"VALUES (:coxBarCode, :serialNo, :currentStatus, :currentLocationNo, "+
":desc, :hardwareModelId, :ownerTypeCode, :firstEnteredDate, :enteredByUser, :lastAuditDate, :hardwarePrice, null)")
.setParameter("coxBarCode", coxBarcode)
.setParameter("serialNo", serialNo)
.setParameter("currentStatus", curstatus)
.setParameter("currentLocationNo", curloc)
.setParameter("desc", desc)
.setParameter("hardwareModelId", selmodid)
.setParameter("ownerTypeCode", selectedOwner)
.setParameter("firstEnteredDate", firstEnteredDate)
.setParameter("enteredByUser", enteredByUser)
.setParameter("lastAuditDate", lastAuditedDate)
.setParameter("hardwarePrice", unitPrice);
query.executeUpdate();
query = entityManager.createNativeQuery("INSERT INTO TbHardwareHistory "+
"VALUES (:hardwareId, :currentStatus, :currentLocationNo, :firstEnteredDate, null, :enteredByUser, :ownerTypeCode)")
.setParameter("hardwareId", findHardwareId(coxBarcode))
.setParameter("currentStatus", curstatus)
.setParameter("currentLocationNo", curloc)
.setParameter("firstEnteredDate", firstEnteredDate)
.setParameter("enteredByUser", enteredByUser)
.setParameter("ownerTypeCode", selectedOwner);
query.executeUpdate();
//TO DO: following query should return only one entity, need to refactor and remove the for loop below
TbHardware hw = (TbHardware)entityManager.createNativeQuery("SELECT t FROM tbHardware t WHERE t.coxBarCode = :coxBarCode AND t.serialNo = :serialNo", TbHardware.class)
.setParameter("coxBarCode", coxBarcode)
.setParameter("serialNo", serialNo)
.getSingleResult();
Integer hardwareId = hw.getHardwareId();
query = entityManager.createNativeQuery("INSERT INTO tbHardwareNote VALUES (:hardwareId, :hardwareNote)")
.setParameter("hardwareId", hardwareId).setParameter("hardwareNote", hardwareNote);
query.executeUpdate();
entityManager.flush();I am getting the following in the server.log:
10:10:57,552 ERROR [STDERR] Caused by: org.hibernate.exception.SQLGrammarException: could not execute native bulk manipulation query
10:10:57,552 ERROR [STDERR] at org.hibernate.exception.SQLStateConverter.convert(SQLStateConverter.java:67)
10:10:57,552 ERROR [STDERR] at org.hibernate.exception.JDBCExceptionHelper.convert(JDBCExceptionHelper.java:43)
10:10:57,552 ERROR [STDERR] at org.hibernate.engine.query.NativeSQLQueryPlan.performExecuteUpdate(NativeSQLQueryPlan.java:174)
10:10:57,552 ERROR [STDERR] at org.hibernate.impl.SessionImpl.executeNativeUpdate(SessionImpl.java:1163)
10:10:57,552 ERROR [STDERR] at org.hibernate.impl.SQLQueryImpl.executeUpdate(SQLQueryImpl.java:334)
10:10:57,552 ERROR [STDERR] at org.hibernate.ejb.QueryImpl.executeUpdate(QueryImpl.java:48)
10:10:57,552 ERROR [STDERR] ... 138 more
10:10:57,552 ERROR [STDERR] Caused by: com.microsoft.sqlserver.jdbc.SQLServerException: Cannot insert duplicate key row in object 'dbo.tbHardware' with unique index 'IX_tbHardwar_coxBarCode_UNIQUE'.
10:10:57,552 ERROR [STDERR] at com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDatabaseError(Unknown Source)
10:10:57,552 ERROR [STDERR] at com.microsoft.sqlserver.jdbc.SQLServerStatement.getNextResult(Unknown Source)
10:10:57,552 ERROR [STDERR] at com.microsoft.sqlserver.jdbc.SQLServerPreparedStatement.doExecutePreparedStatement(Unknown Source)
10:10:57,552 ERROR [STDERR] at com.microsoft.sqlserver.jdbc.SQLServerPreparedStatement$PrepStmtExecCmd.doExecute(Unknown Source)
10:10:57,552 ERROR [STDERR] at com.microsoft.sqlserver.jdbc.TDSCommand.execute(Unknown Source)
10:10:57,552 ERROR [STDERR] at com.microsoft.sqlserver.jdbc.SQLServerConnection.executeCommand(Unknown Source)
10:10:57,552 ERROR [STDERR] at com.microsoft.sqlserver.jdbc.SQLServerStatement.executeCommand(Unknown Source)
10:10:57,552 ERROR [STDERR] at com.microsoft.sqlserver.jdbc.SQLServerStatement.executeStatement(Unknown Source)
10:10:57,552 ERROR [STDERR] at com.microsoft.sqlserver.jdbc.SQLServerPreparedStatement.executeUpdate(Unknown Source)
10:10:57,552 ERROR [STDERR] at org.jboss.resource.adapter.jdbc.WrappedPreparedStatement.executeUpdate(WrappedPreparedStatement.java:251)
10:10:57,552 ERROR [STDERR] at org.hibernate.engine.query.NativeSQLQueryPlan.performExecuteUpdate(NativeSQLQueryPlan.java:165)
10:10:57,552 ERROR [STDERR] ... 141 moreHow should I handle this SQLServerException? What is the best practice regarding this from a JPA perspective? I thought about executing a select query prior to the insert in tbHardware to check to see if a record with that particular coxBarCode exists or not. Would the exception be handled differently if I used the persist() method instead of the createNativeQuery() and executeUpdate() combination? thx.
Edited by: asookazian on May 7, 2008 11:07 AMkajbj wrote:
What do you mean by control? Yes, you can find duplicates and remove them (by e.g. implementing a Comparator and adding them to a Set)
KajI mean to say replace the duplication with just a single value for insert!
Any psuedo for the comparactor suggested? -
When we try to deploy a wsp to sharepoint containing code to generate quick launch menu we get the following error messages when running the last enable-spfeature command in powershell. The same code is working in the development environment, but when we
deploy to a test server the following error occurs:
Add-SPSolution "C:\temp\ImpactSharePoint.wsp"
Install-SPSolution -Identity impactsharepoint.wsp -GACDeployment
Enable-SPFeature impactsharepoint_branding -url http://im-sp1/sites/impact/
Enable-SPFeature impactsharepoint_pages -url http://im-sp1/sites/impact/
From UlsViewer.exe:
03.12.2014 15:21:25.45 PowerShell.exe (0x1620)
0x11F4 SharePoint Foundation
Database 880i
High System.Data.SqlClient.SqlException (0x80131904): Cannot insert duplicate key row in object 'dbo.NavNodes' with unique index 'NavNodes_PK'. The duplicate key value is (6323df8a-5c57-4d3e-a477-09aa8b66100a, 7ae114df-9d52-4b08-affa-8c544cbc27b6,
1000). The statement has been terminated. at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject
stateObj, Boolean callerHasConnectionLock, Boolean asyncClose) at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj,
Boolean& dataReady) at System.Data.SqlClient.SqlDataReader.TryConsumeMetaData() at System.Data.SqlClient.SqlDataReader.get_MetaData() at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior
runBehavior, String resetOptionsString) at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior
cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method) at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method) at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior
behavior) at Microsoft.SharePoint.Utilities.SqlSession.ExecuteReader(SqlCommand command, CommandBehavior behavior, SqlQueryData monitoringData, Boolean retryForDeadLock) ClientConnectionId:2bb4004c-aa75-470e-b11e-dbf1c476aaed
5b7e05f7-49df-42ca-b7c9-8ae5b06b464f
03.12.2014 15:21:25.45 PowerShell.exe (0x1620)
0x11F4 SharePoint Foundation
Database 880k
High at Microsoft.SharePoint.SPSqlClient.ExecuteQueryInternal(Boolean retryfordeadlock) at Microsoft.SharePoint.SPSqlClient.ExecuteQuery(Boolean retryfordeadlock) at Microsoft.SharePoint.Library.SPRequestInternalClass.AddNavigationNode(String
bstrUrl, String bstrName, String bstrNameResource, String bstrNodeUrl, Int32 lType, Int32 lParentId, Int32 lPreviousSiblingId, Boolean bAddToQuickLaunch, Boolean bAddToSearchNav, String& pbstrDateModified) at Microsoft.SharePoint.Library.SPRequestInternalClass.AddNavigationNode(String
bstrUrl, String bstrName, String bstrNameResource, String bstrNodeUrl, Int32 lType, Int32 lParentId, Int32 lPreviousSiblingId, Boolean bAddToQuickLaunch, Boolean bAddToSearchNav, String& pbstrDateModified) at Microsoft.SharePoint.Library.SPRequest.AddNavigationNode(String
bstrUrl, String bstrName, String bstrNameResource, String bstrNodeUrl, Int32 lType, Int32 lParentId, Int32 lPreviousSiblingId, Boolean bAddToQuickLaunch, Boolean bAddToSearchNav, String& pbstrDateModified) at Microsoft.SharePoint.Navigation.SPNavigationNode.AddInternal(Int32
iPreviousNodeId, Int32 iParentId, Boolean bAddToQuickLaunch, Boolean bAddToSearchNav) at Microsoft.SharePoint.Navigation.SPNavigationNodeCollection.AddInternal(SPNavigationNode node, Int32 iPreviousNodeId) at ImpactSharePoint.ConfigureSharePointInstance.NavigationConfig.<ConfigureQuickLaunchBar>b__0()
at Microsoft.SharePoint.SPSecurity.<>c__DisplayClass5.<RunWithElevatedPrivileges>b__3() at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated secureCode) at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback
secureCode, Object param) at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated secureCode) at ImpactSharePoint.ConfigureSharePointInstance.NavigationConfig.ConfigureQuickLaunchBar() at ImpactSharePoint.Features.Pages.PagesEventReceiver.FeatureActivated(SPFeatureReceiverProperties
properties) at Microsoft.SharePoint.SPFeature.DoActivationCallout(Boolean fActivate, Boolean fForce) at Microsoft.SharePoint.SPFeature.Activate(SPSite siteParent, SPWeb webParent, SPFeaturePropertyCollection props, SPFeatureActivateFlags
activateFlags, Boolean fForce) at Microsoft.SharePoint.SPFeatureCollection.AddInternal(SPFeatureDefinition featdef, Version version, SPFeaturePropertyCollection properties, SPFeatureActivateFlags activateFlags, Boolean force, Boolean fMarkOnly)
at Microsoft.SharePoint.SPFeature.ActivateDeactivateFeatureAtWeb(Boolean fActivate, Boolean fEnsure, Guid featid, SPFeatureDefinition featdef, String urlScope, String sProperties, Boolean fForce) at Microsoft.SharePoint.SPFeature.ActivateDeactivateFeatureAtScope(Boolean
fActivate, Guid featid, SPFeatureDefinition featdef, String urlScope, Boolean fForce) at Microsoft.SharePoint.PowerShell.SPCmdletEnableFeature.UpdateDataObject() at Microsoft.SharePoint.PowerShell.SPCmdlet.ProcessRecord()
at System.Management.Automation.CommandProcessor.ProcessRecord() at System.Management.Automation.CommandProcessorBase.DoExecute() at System.Management.Automation.Internal.PipelineProcessor.SynchronousExecuteEnumerate(Object
input, Hashtable errorResults, Boolean enumerate) at System.Management.Automation.PipelineOps.InvokePipeline(Object input, Boolean ignoreInput, CommandParameterInternal[][] pipeElements, CommandBaseAst[] pipeElementAsts, CommandRedirection[][]
commandRedirections, FunctionContext funcContext) at System.Management.Automation.Interpreter.ActionCallInstruction`6.Run(InterpretedFrame frame) at System.Management.Automation.Interpreter.EnterTryCatchFinallyInstruction.Run(InterpretedFrame
frame) at System.Management.Automation.Interpreter.EnterTryCatchFinallyInstruction.Run(InterpretedFrame frame) at System.Management.Automation.Interpreter.Interpreter.Run(InterpretedFrame frame) at System.Management.Automation.Interpreter.LightLambda.RunVoid1[T0](T0
arg0) at System.Management.Automation.DlrScriptCommandProcessor.RunClause(Action`1 clause, Object dollarUnderbar, Object inputToProcess) at System.Management.Automation.CommandProcessorBase.DoComplete() at System.Management.Automation.Internal.PipelineProcessor.DoCompleteCore(CommandProcessorBase
commandRequestingUpstreamCommandsToStop) at System.Management.Automation.Internal.PipelineProcessor.SynchronousExecuteEnumerate(Object input, Hashtable errorResults, Boolean enumerate) at System.Management.Automation.Runspaces.LocalPipeline.InvokeHelper()
at System.Management.Automation.Runspaces.LocalPipeline.InvokeThreadProc() at System.Management.Automation.Runspaces.PipelineThread.WorkerProc() at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext,
ContextCallback callback, Object state, Boolean preserveSyncCtx) at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx) at System.Threading.ExecutionContext.Run(ExecutionContext
executionContext, ContextCallback callback, Object state) at System.Threading.ThreadHelper.ThreadStart()
5b7e05f7-49df-42ca-b7c9-8ae5b06b464f
03.12.2014 15:21:25.45 PowerShell.exe (0x1620)
0x11F4 SharePoint Foundation
Database 880j
High SqlError: 'Cannot insert duplicate key row in object 'dbo.NavNodes' with unique index 'NavNodes_PK'. The duplicate key value is (6323df8a-5c57-4d3e-a477-09aa8b66100a, 7ae114df-9d52-4b08-affa-8c544cbc27b6, 1000).'
Source: '.Net SqlClient Data Provider' Number: 2601 State: 1 Class: 14 Procedure: 'proc_NavStructAddNewNode' LineNumber: 92 Server: 'IMPACTCLUSTER\IMPACTDB'
5b7e05f7-49df-42ca-b7c9-8ae5b06b464f
03.12.2014 15:21:25.45 PowerShell.exe (0x1620)
0x11F4 SharePoint Foundation
Database 880j
High SqlError: 'The statement has been terminated.' Source: '.Net SqlClient Data Provider' Number: 3621 State: 0 Class: 0 Procedure: 'proc_NavStructAddNewNode' LineNumber: 92 Server: 'IMPACTCLUSTER\IMPACTDB'
5b7e05f7-49df-42ca-b7c9-8ae5b06b464f
03.12.2014 15:21:25.45 PowerShell.exe (0x1620)
0x11F4 SharePoint Foundation
Database tzku
High ConnectionString: 'Data Source=IMPACTCLUSTER\IMPACTDB;Initial Catalog=WSS_Content;Integrated Security=True;Enlist=False;Pooling=True;Min Pool Size=0;Max Pool Size=100;Connect Timeout=15;Application Name=SharePoint[powershell][1][WSS_Content]'
Partition: 6323df8a-5c57-4d3e-a477-09aa8b66100a ConnectionState: Closed ConnectionTimeout: 15
5b7e05f7-49df-42ca-b7c9-8ae5b06b464f
03.12.2014 15:21:25.45 PowerShell.exe (0x1620)
0x11F4 SharePoint Foundation
Database tzkv
High SqlCommand: 'BEGIN TRAN DECLARE @abort int SET @abort = 0 DECLARE @EidBase int,@EidHome int SET @EidBase = 0 SET @EidHome = NULL IF @abort = 0 BEGIN EXEC @abort = proc_NavStructAllocateEidBlockWebId @wssp0, @wssp1,
@wssp2, @wssp3, @EidBase OUTPUT SELECT @wssp4 = @EidBase, @wssp5 = @abort END IF @abort = 0 BEGIN EXEC @abort = proc_NavStructAddNewNodeByUrl '6323DF8A-5C57-4D3E-A477-09AA8B66100A','7AE114DF-9D52-4B08-AFFA-8C544CBC27B6',1,2072,-1,0,N'sites/impact/default.aspx',N'PersonSøk',N'PersonSøk',NULL,0,0,0,NULL,@EidBase,@EidHome
OUTPUT SELECT @wssp6 = @abort END IF @abort = 0 BEGIN EXEC proc_NavStructLogChangesAndUpdateSiteChangedTime @wssp7, @wssp8, NULL END IF @abort <> 0 BEGIN ROLLBACK TRAN END ELSE BEGIN COMMIT TRAN END IF @abort = 0 BEGIN EXEC proc_UpdateDiskUsed
'6323DF8A-5C57-4D3E-A477-09AA8B66100A' END ' CommandType: Text CommandTimeout: 0 Parameter: '@wssp0' Type: UniqueIdentifier Size: 0 Direction: Input Value: '6323df8a-5c57-4d3e-a477-09aa8b66100a' Parameter: '@wssp1'
Type: UniqueIdentifier Size: 0 Direction: Input Value: '7ae114df-9d52-4b08-affa-8c544cbc27b6' Parameter: '@wssp2' Type: Int Size: 0 Direction: Input Value: '1' Parameter: '@wssp3' Type: Int Size: 0 Direction: Input Value: '2072'
Parameter: '@wssp4' Type: Int Size: 0 Direction: Output Value: '2072' Parameter: '@wssp5' Type: Int Size: 0 Direction: Output Value: '0' Parameter: '@wssp6' Type: Int Size: 0 Direction: Output Value: '10006'
Parameter: '@wssp7' Type: UniqueIdentifier Size: 0 Direction: Input Value: '6323df8a-5c57-4d3e-a477-09aa8b66100a' Parameter: '@wssp8' Type: UniqueIdentifier Size: 0 Direction: Input Value: '7ae114df-9d52-4b08-affa-8c544cbc27b6'
5b7e05f7-49df-42ca-b7c9-8ae5b06b464f
03.12.2014 15:21:25.45 PowerShell.exe (0x1620)
0x11F4 SharePoint Foundation
Database aek90
High SecurityOnOperationCheck = True
5b7e05f7-49df-42ca-b7c9-8ae5b06b464f
03.12.2014 15:21:25.45 PowerShell.exe (0x1620)
0x11F4 SharePoint Foundation
Database d0d6
High System.Data.SqlClient.SqlException (0x80131904): Cannot insert duplicate key row in object 'dbo.NavNodes' with unique index 'NavNodes_PK'. The duplicate key value is (6323df8a-5c57-4d3e-a477-09aa8b66100a, 7ae114df-9d52-4b08-affa-8c544cbc27b6,
1000). The statement has been terminated. at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject
stateObj, Boolean callerHasConnectionLock, Boolean asyncClose) at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj,
Boolean& dataReady) at System.Data.SqlClient.SqlDataReader.TryConsumeMetaData() at System.Data.SqlClient.SqlDataReader.get_MetaData() at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior
runBehavior, String resetOptionsString) at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior
cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method) at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method) at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior
behavior) at Microsoft.SharePoint.Utilities.SqlSession.ExecuteReader(SqlCommand command, CommandBehavior behavior, SqlQueryData monitoringData, Boolean retryForDeadLock) at Microsoft.SharePoint.SPSqlClient.ExecuteQueryInternal(Boolean
retryfordeadlock) at Microsoft.SharePoint.SPSqlClient.ExecuteQuery(Boolean retryfordeadlock) ClientConnectionId:2bb4004c-aa75-470e-b11e-dbf1c476aaed
5b7e05f7-49df-42ca-b7c9-8ae5b06b464f
03.12.2014 15:21:25.45 PowerShell.exe (0x1620)
0x11F4 SharePoint Foundation
Database ad194
High ExecuteQuery failed with original error 0x80131904
5b7e05f7-49df-42ca-b7c9-8ae5b06b464f
03.12.2014 15:21:25.45 PowerShell.exe (0x1620)
0x11F4 SharePoint Foundation
Database 8z23
Unexpected Unexpected query execution failure in navigation query, HResult -2146232060. Query text (if available): "BEGIN TRAN DECLARE @abort int SET @abort = 0 DECLARE @EidBase int,@EidHome int SET @EidBase
= 0 SET @EidHome = NULL IF @abort = 0 BEGIN EXEC @abort = proc_NavStructAllocateEidBlockWebId @wssp0, @wssp1, @wssp2, @wssp3, @EidBase OUTPUT SELECT @wssp4 = @EidBase, @wssp5 = @abort END IF @abort = 0 BEGIN EXEC @abort = proc_NavStructAddNewNodeByUrl '6323DF8A-5C57-4D3E-A477-09AA8B66100A','7AE114DF-9D52-4B08-AFFA-8C544CBC27B6',1,2072,-1,0,N'sites/impact/default.aspx',N'PersonSøk',N'PersonSøk',NULL,0,0,0,NULL,@EidBase,@EidHome
OUTPUT SELECT @wssp6 = @abort END IF @abort = 0 BEGIN EXEC proc_NavStructLogChangesAndUpdateSiteChangedTime @wssp7, @wssp8, NULL END IF @abort <> 0 BEGIN ROLLBACK TRAN END ELSE BEGIN COMMIT TRAN END IF @abort = 0 BEGIN EXEC proc_UpdateDiskUsed
'6323DF8A-5C57-4D3E-A477-09AA8B66100A' END "
5b7e05f7-49df-42ca-b7c9-8ae5b06b464f
03.12.2014 15:21:25.45 PowerShell.exe (0x1620)
0x11F4 SharePoint Foundation
General 8kh7
High <nativehr>0x8107140d</nativehr><nativestack></nativestack>An unexpected error occurred while manipulating the navigational structure of this Web.
5b7e05f7-49df-42ca-b7c9-8ae5b06b464f
03.12.2014 15:21:25.45 PowerShell.exe (0x1620)
0x11F4 SharePoint Foundation
General aix9j
High SPRequest.AddNavigationNode: UserPrincipalName=i:0).w|s-1-5-21-2030300366-1823906440-2562684930-2106, AppPrincipalName= ,bstrUrl=http://im-sp1/sites/impact ,bstrName=PersonSøk ,bstrNameResource=<null> ,bstrNodeUrl=/sites/impact/default.aspx
,lType=0 ,lParentId=2072 ,lPreviousSiblingId=-1 ,bAddToQuickLaunch=False ,bAddToSearchNav=False
5b7e05f7-49df-42ca-b7c9-8ae5b06b464f
03.12.2014 15:21:25.45 PowerShell.exe (0x1620)
0x11F4 SharePoint Foundation
General ai1wu
Medium System.Runtime.InteropServices.COMException: <nativehr>0x8107140d</nativehr><nativestack></nativestack>An unexpected error occurred while manipulating the navigational structure of this
Web., StackTrace: at Microsoft.SharePoint.Navigation.SPNavigationNode.AddInternal(Int32 iPreviousNodeId, Int32 iParentId, Boolean bAddToQuickLaunch, Boolean bAddToSearchNav) at Microsoft.SharePoint.Navigation.SPNavigationNodeCollection.AddInternal(SPNavigationNode
node, Int32 iPreviousNodeId) at ImpactSharePoint.ConfigureSharePointInstance.NavigationConfig.<ConfigureQuickLaunchBar>b__0() at Microsoft.SharePoint.SPSecurity.<>c__DisplayClass5.<RunWithElevatedPrivileges>b__3()
at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated secureCode) at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback secureCode, Object param) at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated
secureCode) at ImpactSharePoint.ConfigureSharePointInstance.NavigationConfig.ConfigureQuickLaunchBar() at ImpactSharePoint.Features.Pages.PagesEventReceiver.FeatureActivated(SPFeatureReceiverProperties properties)
at Microsoft.SharePoint.SPFeature.DoActivationCallout(Boolean fActivate, Boolean fForce) at Microsoft.SharePoint.SPFeature.Activate(SPSite siteParent, SPWeb webParent, SPFeaturePropertyCollection props, SPFeatureActivateFlags activateFlags, Boolean
fForce) at Microsoft.SharePoint.SPFeatureCollection.AddInternal(SPFeatureDefinition featdef, Version version, SPFeaturePropertyCollection properties, SPFeatureActivateFlags activateFlags, Boolean force, Boolean fMarkOnly) at Microsoft.SharePoint.SPFeature.ActivateDeactivateFeatureAtWeb(Boolean
fActivate, Boolean fEnsure, Guid featid, SPFeatureDefinition featdef, String urlScope, String sProperties, Boolean fForce) at Microsoft.SharePoint.SPFeature.ActivateDeactivateFeatureAtScope(Boolean fActivate, Guid featid, SPFeatureDefinition
featdef, String urlScope, Boolean fForce) at Microsoft.SharePoint.PowerShell.SPCmdletEnableFeature.UpdateDataObject() at Microsoft.SharePoint.PowerShell.SPCmdlet.ProcessRecord() at System.Management.Automation.CommandProcessor.ProcessRecord()
at System.Management.Automation.CommandProcessorBase.DoExecute() at System.Management.Automation.Internal.PipelineProcessor.SynchronousExecuteEnumerate(Object input, Hashtable errorResults, Boolean enumerate) at System.Management.Automation.PipelineOps.InvokePipeline(Object
input, Boolean ignoreInput, CommandParameterInternal[][] pipeElements, CommandBaseAst[] pipeElementAsts, CommandRedirection[][] commandRedirections, FunctionContext funcContext) at System.Management.Automation.Interpreter.ActionCallInstruction`6.Run(InterpretedFrame
frame) at System.Management.Automation.Interpreter.EnterTryCatchFinallyInstruction.Run(InterpretedFrame frame) at System.Management.Automation.Interpreter.EnterTryCatchFinallyInstruction.Run(InterpretedFrame frame)
at System.Management.Automation.Interpreter.Interpreter.Run(InterpretedFrame frame) at System.Management.Automation.Interpreter.LightLambda.RunVoid1[T0](T0 arg0) at System.Management.Automation.DlrScriptCommandProcessor.RunClause(Action`1
clause, Object dollarUnderbar, Object inputToProcess) at System.Management.Automation.CommandProcessorBase.DoComplete() at System.Management.Automation.Internal.PipelineProcessor.DoCompleteCore(CommandProcessorBase commandRequestingUpstreamCommandsToStop)
at System.Management.Automation.Internal.PipelineProcessor.SynchronousExecuteEnumerate(Object input, Hashtable errorResults, Boolean enumerate) at System.Management.Automation.Runspaces.LocalPipeline.InvokeHelper()
at System.Management.Automation.Runspaces.LocalPipeline.InvokeThreadProc() at System.Management.Automation.Runspaces.PipelineThread.WorkerProc() at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext,
ContextCallback callback, Object state, Boolean preserveSyncCtx) at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx) at System.Threading.ExecutionContext.Run(ExecutionContext
executionContext, ContextCallback callback, Object state) at System.Threading.ThreadHelper.ThreadStart()
5b7e05f7-49df-42ca-b7c9-8ae5b06b464f
03.12.2014 15:21:25.45 PowerShell.exe (0x1620)
0x11F4 SharePoint Foundation
Feature Infrastructure 88jm
High Feature receiver assembly 'ImpactSharePoint, Version=1.1.0.0, Culture=neutral, PublicKeyToken=3f4d824fecc0071e', class 'ImpactSharePoint.Features.Pages.PagesEventReceiver', method 'FeatureActivated' for feature
'd8aabd95-076a-4650-a8a6-0aa5bd8ac8d1' threw an exception: Microsoft.SharePoint.SPException: An unexpected error occurred while manipulating the navigational structure of this Web. ---> System.Runtime.InteropServices.COMException: <nativehr>0x8107140d</nativehr><nativestack></nativestack>An
unexpected error occurred while manipulating the navigational structure of this Web. at Microsoft.SharePoint.Library.SPRequestInternalClass.AddNavigationNode(String bstrUrl, String bstrName, String bstrNameResource, String bstrNodeUrl, Int32
lType, Int32 lParentId, Int32 lPreviousSiblingId, Boolean bAddToQuickLaunch, Boolean bAddToSearchNav, String& pbstrDateModified) at Microsoft.SharePoint.Library.SPRequest.AddNavigationNode(String bstrUrl, String bstrName, String bstrNameResource,
String bstrNodeUrl, Int32 lType, Int32 lParentId, Int32 lPreviousSiblingId, Boolean bAddToQuickLaunch, Boolean bAddToSearchNav, String& pbstrDateModified) --- End of inner exception stack trace --- at Microsoft.SharePoint.SPGlobal.HandleComException(COMException
comEx) at Microsoft.SharePoint.Library.SPRequest.AddNavigationNode(String bstrUrl, String bstrName, String bstrNameResource, String bstrNodeUrl, Int32 lType, Int32 lParentId, Int32 lPreviousSiblingId, Boolean bAddToQuickLaunch, Boolean bAddToSearchNav,
String& pbstrDateModified) at Microsoft.SharePoint.Navigation.SPNavigationNode.AddInternal(Int32 iPreviousNodeId, Int32 iParentId, Boolean bAddToQuickLaunch, Boolean bAddToSearchNav) at Microsoft.SharePoint.Navigation.SPNavigationNodeCollection.AddInternal(SPNavigationNode
node, Int32 iPreviousNodeId) at ImpactSharePoint.ConfigureSharePointInstance.NavigationConfig.<ConfigureQuickLaunchBar>b__0() at Microsoft.SharePoint.SPSecurity.<>c__DisplayClass5.<RunWithElevatedPrivileges>b__3()
at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated secureCode) at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback secureCode, Object param) at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated
secureCode) at ImpactSharePoint.ConfigureSharePointInstance.NavigationConfig.ConfigureQuickLaunchBar() at ImpactSharePoint.Features.Pages.PagesEventReceiver.FeatureActivated(SPFeatureReceiverProperties properties)
at Microsoft.SharePoint.SPFeature.DoActivationCallout(Boolean fActivate, Boolean fForce)
5b7e05f7-49df-42ca-b7c9-8ae5b06b464f
The code:
using System.Diagnostics;
using Microsoft.SharePoint;
using Microsoft.SharePoint.Navigation;
namespace ImpactSharePoint.ConfigureSharePointInstance
public class NavigationConfig
public void ConfigureQuickLaunchBar(SPWeb web)
SPSecurity.RunWithElevatedPrivileges(delegate
//Delete All Links
web.AllowUnsafeUpdates = true;
for (int i = web.Navigation.QuickLaunch.Count - 1; i > -1; i--)
web.Navigation.QuickLaunch[i].Delete(); // -> Deleting all the links in quick launch
web.QuickLaunchEnabled = true;
EventLog.WriteEntry("Sharepointfeature","Starter");
//Adding Links
SPNavigationNodeCollection nodes = web.Navigation.QuickLaunch;
var sokNode = new SPNavigationNode("Søk", null, false);
nodes.AddAsFirst(sokNode);
sokNode.Update();
EventLog.WriteEntry("Sharepointfeature", "Lagt til søk");
// Personsøk
var personSokNode = new SPNavigationNode("Deltakere", "/sites/impact/default.aspx", false); //TODO: fix hardkoding
sokNode.Children.AddAsFirst(personSokNode);
personSokNode.Update();
EventLog.WriteEntry("Sharepointfeature", "Lagt til node personsøk");
// Udb-søk
var udbSokNode = new SPNavigationNode("UDB-Søk", "/sites/impact/udbsok.aspx", false); //TODO: fix hardkoding
sokNode.Children.AddAsLast(udbSokNode);
udbSokNode.Update();
EventLog.WriteEntry("Sharepointfeature", "Lagt til node udbsøk");
// Kommuner
var kommuneNode = new SPNavigationNode("Kommuner", "/sites/impact/kommunesearch.aspx", false); //TODO: fix hardkoding
sokNode.Children.AddAsFirst(kommuneNode);
kommuneNode.Update();
EventLog.WriteEntry("Sharepointfeature", "Lagt til node kommunesøk");
// Organisasjoner
var virksomhetNode = new SPNavigationNode("Organisasjoner", "/sites/impact/virksomhetsearch.aspx", false); //TODO: fix hardkoding
sokNode.Children.AddAsFirst(virksomhetNode);
virksomhetNode.Update();
EventLog.WriteEntry("Sharepointfeature", "Lagt til node kommunesøk");
// NIR
var nirNode = new SPNavigationNode("Nir", null, false); //TODO: fix hardkoding
nodes.AddAsLast(nirNode);
nirNode.Update();
EventLog.WriteEntry("Sharepointfeature", "Lagt til node Nir");
// Tilskudd
var tilskuddNode = new SPNavigationNode("Tilskudd", "/sites/impact/", false);
nodes.AddAsLast(tilskuddNode);
tilskuddNode.Update();
EventLog.WriteEntry("Sharepointfeature", "Lagt til node Tilskudd");
// Kjøringsoversikt
var showkjoringerNode = new SPNavigationNode("Kjøringsoversikt", "/sites/dev/kjoringoversikt.aspx", false); //TODO: fix hardkoding
tilskuddNode.Children.AddAsFirst(showkjoringerNode);
showkjoringerNode.Update();
EventLog.WriteEntry("Sharepointfeature", "Lagt til node showkjoringerNode");
web.Update();
EventLog.WriteEntry("Sharepointfeature", "Etter update");
//Setting homepage
SPFolder folder = web.RootFolder;
folder.WelcomePage = "default.aspx";
folder.Update();
EventLog.WriteEntry("Sharepointfeature", "Etter homepage");
web.AllowUnsafeUpdates = false;i think you need to debug your code, lookalike the values you trying insert already exist in the database.
these two IDs (6323df8a-5c57-4d3e-a477-09aa8b66100a, 7ae114df-9d52-4b08-affa-8c544cbc27b6).
i would try to run the select command against the content db.
SELECT TOP * FROM [DB Name].[dbo].[NavNodes] where id = '6323df8a-5c57-4d3e-a477-09aa8b66100a'
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog -
Cannot insert duplicate key in object 'dbo.CultureObjectStrings'
Hi Everyone,
No matter what instance I chose to run the Tasks function on the Installer I get this error:
Violation of UNIQUE KEY constraint 'IX_CultureObjectStrings'.
Cannot insert duplicate key in object 'dbo.CultureObjectStrings'
The statement has been terminated.
The Tasks Utility stops at 'Initialize Languages'. When I look at the CRM online I checked the Config Settings, Netpoint, Culture and it is set to English(United States).
I am running Business One SP01 Pl 06 and WebTools 6 PL04. I have created new instances and database and still get the same error when running Tasks after they have been built and synched.
What else can I do?
Thanks, ChesterHi Stephen,
Sorry, I am running SP01 PL 4 on WebTools. I am not running 'instance mode' I am running 'Tasks' mode. The reason this all started was when I got all of my customers data(databases,instance.xml,synch.xml, etc.) to run on my PC. Once everything is transfered to my PC, I run 'task' mode to insure I have the right hash and private keys assoicated with the data. When I frist started doing this procedure it worked, and I don't which levels back that was, but now it is a problem. So, when I saw this happening with the transfer of the data to my PC, I thought I'd try running 'tasks' mode on the orginal data just make sure I had everything. When I said I built new companies I used the OEC data that come with WebTools because I thought maybe it the customers data, but it didn't matter, still got the same error.
Thanks, Chester -
*** [23000][2627][Microsoft][SQL Server Native Client 11.0][SQL Server]Violation of UNIQUE KEY constraint 'ClientPushMachine_G_AK'. Cannot insert duplicate key in object 'dbo.ClientPushMachine_G'. The duplicate key value is (16777412). : sp_CP_CheckNewAssignedMachine
CCCRT::RunSQLStoredProc - Failed to execute SQL cmd exec [sp_CP_CheckNewAssignedMachine] N'xxx', 1
CCRQueueRequest::GetRequestFromQueue - Failed to execute SQL cmd sp_CP_CheckNewAssignedMachine
I get the above issue and the one below at a client site; the error started with the error below then changed to the one reported above and back to the one below. Everything is working as it should but the issues
started when one of the admins at the data-centre incorrectly applied a gpo which affected a number of service accounts (sccm inclusive) and they expired....hence reporting in sccm got broke as well as this error in the ccm.log file appeared.
Remote client install still works but I believe this error affects new client discovered by sccm, so in other words devices discovered by sccm do not get the client installed automatically....but if all access and permissions are in place...pushing out the
client to the new discovered system works, it just not done automatically, which kinda defeats one the reasons for using sccm.
I have searched the breadth of the tinternet and I can only find two technet reference to the same error - one says to edit the stored procedure on the sql server which I don't think should be done... Like Jason said and I concur....its bad joo joos.
The second suggestion, said you should select all the options in the Client Push Installation properties, I have tried this but hasn't solved the problem.
I am planning to upgrade the site to the R2 CU3 before the end of the year but I would like to resolve this error before the upgrade.
The site is currently sccm 2012 sp1
Any idea?> Resolution? sil vous plait!
MerciHi ,
Please back up the database of the SCCM site. Then run the following query against the Site DB and see how it goes.
DELETE FROM System_SMS_Resident_ARR
WHERE ItemKey IN (
SELECT ItemKey FROM vSystem_SMS_Resident_ARR
GROUP BY ItemKey
HAVING COUNT(ItemKey) > 1
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
I have an index constraint "IX_Tag_Processed" on the field "Tag_Name" for the table "Tag_Processed". I keep getting this constraint error:
Msg 2601, Level 14, State 1, Line 15
Cannot insert duplicate key row in object 'etag.Tag_Processed' with unique index 'IX_Tag_Processed'. The duplicate key value is (AZPS_TEMUWS0110BL4_CISO).
The statement has been terminated.
For this INSERT: I have tried using tagstg.Tag_Name NOT IN with same result:
INSERT into [Forecast_Data_Repository].[etag].[Tag_Processed] (Tag_Name, Tag_Type,Start_Datetime, End_Datetime, Source_SC, Sink_SC, Source_CA, Sink_CA, Source, Sink, Load_dt, Energy_product_code_id)
SELECT DISTINCT (Tag_Name), Tag_Type,Start_Datetime, End_Datetime, Source_SC, Sink_SC, Source_CA, Sink_CA, Source, Sink, GETUTCDATE(), [Forecast_Data_Repository].rscalc.GetStubbedEngProductCodeFromStaging(tagstg.Tag_Name)
FROM [Forecast_Data_Repository].[etag].[Tag_Stg] tagstg
WHERE tagstg.Id BETWEEN @minTId AND @maxTId --AND
--tagstg.Tag_Name NOT IN (
-- SELECT DISTINCT tproc.Tag_Name from [Forecast_Data_Repository].[etag].[Tag_Processed] tproc
thank you in advance,
Greg HansonI have even tried a merge with the same constraint error,
DECLARE @minTId bigint, @minTRId bigint, @minEId bigint
DECLARE @maxTId bigint, @maxTRId bigint, @maxEId bigint
DECLARE @errorCode int
DECLARE @ReturnCodeTypeIdName nvarchar(50)
SELECT @minTRId = Min(Id) FROM [etag].[Transmission_Stg]
SELECT @maxTRId = Max(Id) FROM [etag].[Transmission_Stg]
SELECT @minTId = Min(Id) FROM [etag].[Tag_Stg]
SELECT @maxTId = Max(Id) FROM [etag].[Tag_Stg]
DECLARE @MergeOutputTag TABLE
ActionType NVARCHAR(10),
InsertTagName NVARCHAR(50)
--UpdateTagName NVARCHAR(50)
--DeleteTagName NVARCHAR(50)
DECLARE @MergeOutputEnergy TABLE
ActionType NVARCHAR(10),
InsertTagId BIGINT
--UpdateTagName NVARCHAR(50)
--DeleteTagName NVARCHAR(50)
DECLARE @MergeOutputTransmission TABLE
ActionType NVARCHAR(10),
InsertTagId BIGINT
--UpdateTagName NVARCHAR(50)
--DeleteTagName NVARCHAR(50)
MERGE [Forecast_Data_Repository].[etag].[Tag_Processed] tagProc
USING [Forecast_Data_Repository].[etag].[Tag_Stg] tagStg
ON
tagProc.Tag_Name = tagStg.Tag_Name AND
tagProc.Tag_Type = tagStg.Tag_Type AND
tagProc.Start_Datetime = tagStg.Start_Datetime AND
tagProc.End_Datetime = tagStg.End_Datetime AND
tagProc.Source_SC = tagStg.Source_SC AND
tagProc.Source_CA = tagStg.Source_CA AND
tagProc.Sink_CA = tagStg.Sink_CA AND
tagProc.Source = tagStg.Source AND
tagProc.Sink = tagStg.Sink
WHEN MATCHED THEN
UPDATE
SET Tag_Name = tagStg.Tag_Name,
Tag_Type = tagStg.Tag_Type,
Start_DateTime = tagStg.Start_Datetime,
End_Datetime = tagStg.End_Datetime,
Source_SC = tagStg.Source_SC,
Sink_SC = tagStg.Sink_SC,
Source_CA = tagStg.Source_CA,
Sink_CA = tagStg.Sink_CA,
Source = tagStg.Source,
Sink = tagStg.Sink,
Load_dt = GETUTCDATE()
WHEN NOT MATCHED BY TARGET THEN
INSERT (Tag_Name, Tag_Type, Start_Datetime, End_Datetime, Source_SC, Sink_SC, Source_CA, Sink_CA, Source, Sink, Load_dt)
VALUES (tagStg.Tag_Name, tagStg.Tag_Type, tagStg.Start_Datetime, tagStg.End_Datetime, tagStg.Source_SC, tagStg.Sink_SC, tagStg.Source_CA, tagStg.Sink_CA, tagStg.Source, tagStg.Sink, GETUTCDATE())
OUTPUT
$action,
INSERTED.Tag_Name
--UPDATED.Tag_Name
INTO @MergeOutputTag;
SELECT * FROM @MergeOutputTag;
Greg Hanson -
PS_ECQUEUEINST = Cannot insert duplicate key row in object
Running ECIN0001, and getting error
[Microsoft][ODBC SQL Server Driver][SQL Server]Cannot insert duplicate key row in object 'PS_ECQUEUEINST' with unique index 'PS_ECQUEUEINST'
Table values look like as under
ECTRANSID ECTRANSINOUTSW ECQUEUEINSTANCE
ASN_IN I 13
BANKNA I 1891
BSP I 120
EEBANKNA I 11765
HRBUS I -1
HREMP I -1
HREMP I 1
INVOICE O 100
PO ACK I 1
RFQ I 4
VOUCHER-IN I 18083Please, it is always a good idea to provide application, module, Peopletools, database and OS versions you are working on.
Nicolas. -
Hello everyone,
I am getting the following error while importing the CRM 2013 managed solution, Does anyone have any idea regarding this, What could be the possible cause for this ?
"Violation of PRIMARY KEY constraint 'XPKLocalizedLabel'. Cannot insert duplicate key in object 'MetadataSchema.LocalizedLabel'. The duplicate key value is (184191c0-1d6f-e411-9400-e41f13be2efc, 25a01723-9f63-4449-a3e0-046cc23a2902, 0,
Jan 1 1900 12:00AM). The statement has been terminated."
and this guids in the error message is different from organization to organization. Where it is having fix with the solution or organization ?
please help me to solve this.
Thanks in advance, VeereshHi All,
I have exported one unmanaged solution from my development CRM system and imported in to production, while importing i am getting the following error.
"Violation of PRIMARY KEY constraint 'XPKLocalizedLabel'. Cannot insert duplicate key in object 'MetadataSchema.LocalizedLabel'. The duplicate key value is (184191c0-1d6f-e411-9400-e41f13be2efc, 25a01723-9f63-4449-a3e0-046cc23a2902,
0, Jan 1 1900 12:00AM).
The statement has been terminated."
The key point i have noticed here is, recently i have updated my CRM system with server pack 1 and development organization is created after the server pack is installed and production organization is created before the server pack is installed. and
i have tried this in some other organization which is created before the server pack 1 installed it is failed there also and some organization which is created after the server pack 1 is installed it is imported successfully.
so i can see here it is not able to import solution into organization which is created before server pack 1 is installed from which is created after the server pack 1 is installed.
please help me to solve this error.
Thanks,
Veeresh
Thanks in advance, Veeresh
Maybe you are looking for
-
How to use a ip address for pop & smtp server names when creating a new account
My xp PC is on a lan behind a Freebsd os [IE. flavor of unix] which is not running a dns server. The only way to reach it is by ip address. I have configured the account with a ip address for pop & smtp. When I create and sent a email, Thunderbird sh
-
Hello, got a problem connecting to my wifi: every time I start up my Laptop (5 year old Toshiba Satellite L300) the wificonnections are listed but windows is unable to connect to the WIFI. Wificonnection states unable to connect, after running Window
-
Sent items are not received...
Hello community... Seeking some help on a strange problem. I constructed an email over a few days, then sent it to a number of people, and none of them received it. So I resent. Same result. So I forwarded it to myself as a test - a few days ago and
-
Hi Experts, Customer invoice is generated in SD process and FI document also got posted subsequently.Then I cancelled the invoice,for which a reversal accounting document also generated.Now when I am trying to delete the sale order item through VA02,
-
Hi there....when I type in "sh service summary" , I see all of my services, but some are alive and some are down. What would be some reasons why the state is down on some of them? also, for the services that are state down, I cannot ping the VIP, but