Setting 3550 and 3560 Switched to Non-Negotiate

On some of the older models of the 3550 switches I was able to set the SFP interface to non-negotiate. I do not notice that command available in the documentation anymore. Does it still exist?

Hello,
Do you have access to any of the switches in question? You can always use the context help under the interface
(config-if)#switchport ?
On my 3550 the nonegotiate is an option.
HTH
Regards,
James

Similar Messages

  • Daisy chain of 3550 and 3560

    Can we use a mixture of 3550 and 3560 in a daisy chain. What i mean is
    1.if i want to connect 4 switches in a daisy chain can two of them be 3550's and the other two be 3560's.
    2. If i ahve 2 3550's in a daisy chian can i add one more 3560 to the same chain

    it may be more beneficial to aggregate 3 of the switches to one via the GB/SFP ports.
    ie:
    switch1-3560 >> switch2
    switch1-3560 >> switch3
    switch1-3560 >> switch4
    having correctly sized ports for aggregated bandwidth will be required.
    you can also perform daisy chaining as you've asked.

  • Oracle 9i - Unable to set /PAE and /3GB Switch in Windows 2003 Server SP2

    Hi
    I was wondering if anyone had any experience on Windows 2003 Server (SP2) with setting /PAE and /3GB switches.
    I am unable to set both together, setting one or the other works fine in the boot.ini.
    Oracle seem to think you can set both but it causes my OS to crash/become unstable.
    Has anyone set both switches together on 32 bit Windows 2003 Server successfully?
    I am using Oracle 9.2.0.3 Enterprise Edition.
    Thanks

    The server is new. But we installed 10g before 11g was available. Then upgraded to 11g, so it is a little mess. What the oracle installer should have done in a fresh install, it is maybe not what the server has now.
    I have checked for memory issues, processor issues, http errors, every EM setting and metric, and everything looks just right, but the applications are slow and the users are upset.
    Anyway, thanks for the advice. Maybe we will need to re-install everything or go back to 10g on Windows 2003 Server x32. That configuration was working fine before rushing into 11g.

  • AAA and 3560 Switch + CNA

    Hi
    Has anyone got this to work?
    CNA. (Cisco Networks Assistants) and AAA (Tacacs+) on a 3560 switch.
    I can’t get the CNA to work in this setup but it works fine on together with 3500XL and 3550 serie switch. With the same parameter.
    this is the aaa conf.
    aaa authentication login default group tacacs+ local
    aaa authentication login no_tacacs enable
    aaa authentication enable default enable group tacacs+ none
    aaa authorization exec default group tacacs+ local
    aaa authorization exec no_tacacs none
    aaa authorization commands 15 default group tacacs+ if-authenticated local
    aaa authorization commands 15 no_tacacs none
    aaa accounting exec default start-stop group tacacs+
    aaa accounting commands 15 default start-stop group tacacs+
    aaa accounting network default start-stop group tacacs+
    ip http server
    ip http authentication aaa

    Hi
    No. I get the prompt for username and password.
    and hit enter. Then nothing happens. It looks like it's trying to build the network but it never get fines. I know it works without the aaa statement. But I can’t live with that.

  • Cable interconnecting Cat. 3550 and 3560

    What would be an appropiate cable connecting the 3550 catalyst and the 3560?
    3550 has 2 gbic ports, while the 3560 has 4 spf module slots.

    . Can the Cisco Catalyst 3560 Series switches support the GigaStack® or StackWise™ technology?
    A. The Cisco Catalyst 3560 switches do not support the Cisco GigaStack Technology on the Catalyst 3550, 2950G, and 3500 XLs or the Cisco StackWise technology available on the Catalyst 3750. However, a cluster of any combination of these platforms can be managed via a single IP address using the Cisco Network Assistant (CAN) software. There are more details on CNA later in this document.

  • Private vlans and 2960 and 3560 switch

    Hi, I have a 3560 switch that supports private vlans. There are few computers connected to it and private vlans work fine. Now I need to connect a 2960 switch to 3560 switch. 2960 seems to have no private vlan configuration options but it can be private vlan edge? What is private vlan edge? If I put the computers on 2960 to a vlan that is isolated vlan in 3560 will the computers be able to communicate with themselves in layer2 on 2960 switch?

    Example: I have network 10.0.0.0/24. Networks primary vlan is 2001, isolated is 2002 and community is 2003. These settings are on 3560. So if I put computers on 2960 switch to vlan 2002 and make the ports protected ports they will act as isolated ports and they can't communicate with ports that are on isolated vlan 2002 on 3560???
    Can I also use the community vlan on 2960? is this possible because vlans 2002 and 2003 would be on the same network???

  • Two 2911 routers and 3560 switches (load balancing and redundancy)

    Good day, Sir !
    I have a model with hierarchical model. Two routers 2911 and two core switches 3560, two providers.
    I want to design redundancy scheme. Can you advice me how is better to do it ? here you can find image with topology, can you say is it good idea to connect with devices in this way ?
    Hope on you help ! Thank you !!!

    Hi,
    If you want to configure redundancy in your network on LAN you can use HSRP and from the WAN side depending on the connection with the provider you can either use BGP or any IGP.
    If you want to have load balancing as well with redundancy you can define differnt  HSRP group for different  vlan and on the wan with BGP you can use multipath option or with IGP you can manipulate the route matric.
    Thanks & Regards
    Sandeep

  • Configuration of GBIC on 2950 and 3560 switches

    Can someone please advise how to configure a "GBIC T Base Port" on a 2950 switch. I have 2 off and would like to load share and provide redundacy. All documentation that I am aware of does not indicae that they support etherchannel configuration.

    Step 1
    configure terminal
    Enter global configuration mode.
    Step 2
    interface interface-id
    Specify a physical interface to configure, and enter interface configuration mode.
    Valid interfaces include physical interfaces.
    Up to eight interfaces of the same type and speed can be configured for the same group.
    Step 3
    switchport mode {access | trunk}
    switchport access vlan vlan-id
    Assign all interfaces as static-access ports in the same VLAN, or configure them as trunks.
    If you configure the interface as a static-access port, assign it to only one VLAN. The range is 1 to 4094.
    Step 4
    channel-group channel-group-number mode
    {{auto [non-silent] | desirable [non-silent] | on} | {active | passive}}
    For more detail see Etherchannel configuration Guide:
    http://www.cisco.com/univercd/cc/td/doc/product/lan/cat2950/12122ea5/2950scg/swethchl.htm

  • Etherchannel between stack switches[3750] and standalone switch[3560]

    Hi,
    I have 2*3750 switches in stack as core and 1*3560 switch in access layer. I want to enable ether channel between stack switch[3750A & 3750B] and 3560 switches.
    Have connected  2 links from 3560 switch to stack switch, one link to 3750A and other link to 3750B. Will it work in this way as per my requirement? 
    or i should enabled stacking on 3560 switch too and configure cross-stack ether channel between 3750 stack and 3560 stack. i refered few cisco documents, but the cross stack etherchannel configuration example has 3750 at both end stacks.
    Rgds...
    VikramS

    Hi,
     This should work fine as per you set up, the 3750 stack will be acting as one switch, which means that the ether-channel configuration should be straight forward. There is no need to stack the 3560 for this to work, also the 3560 are not stackable.
    Hope this helps.

  • How to set-up and use FAMILY Sharing

    Can someone please explain to me in detail how to set-up and use FAMILY Sharing, none of the information I have so far found in the documentation helps at all, in fact it puts you in a constant loop giving the same information over and over again
    We have quite a few devices from ipads, iphones and ipods and I need to set-up Family Sharing.
    We have our main Apple ID which is linked to our Payment method, I have now got my son a new iPad, I have created his Apple ID and set-up a link via FAMILY Sharing to our main Apple ID.
    From what I read we should be able to share our purchased Apps between family members.
    So I figured I would be able to get the Apps now via iTunes that are part of the FAMILY Sharing, however when I go into ITunes (latest version downloaded yesterday) I can only see the Home sharing menu item not FAMILY Sharing, so I cannot work out in Itunes how to get Apps that are FAMILY shared.  So ok I will try and get Apps directly via the Ipad using the App Store.  To test it is working I look for a known paid for App, I then go to download it and it is now asking me to pay for it again. 
    Can someone please explain to me in detail how FAMILY Sharing is supposed to work and how I get it to work please.
    Thanks for your help
    Greg

    Hey GregWr,
    Thanks for the question. The following resources provides some of the best information regarding Family Sharing. Included, you’ll find information on making sure the accounts are set to "Share my purchases”, as well as information on downloading Family Member purchases from the iTunes Purchased section. Please note that some applications are not shareable.
    Sharing purchased content with Family Sharing - Apple Support
    http://support.apple.com/en-us/HT201085
    Which purchased content can I share using Family Sharing - Apple Support
    http://support.apple.com/en-us/HT203046
    If you don't see your family's shared content - Apple Support
    http://support.apple.com/en-us/HT201454
    Thanks,
    Matt M.

  • DHCP and voice vlan on Cisco 3560 switch

    Greetings,
    I'm setting up a Cisco 3560 switch for voice and data comms. I'm looking for documentation with best practice guidelines for the following requirements.
    1. Using the Cisco 3560 as a DHCP server - Config examples.  Do I need to use different subnets for the voice and data vlans?
    2. Layer 2 CoS QoS  - I'm connecting Aastra phones as well as notebooks - I've been told that Aastra also makes use of the voice vlan config through LLDP and that Aastra phones supports CDP.
    Your assistance will be appreciated.

    Hi ,
    Cisco recommends that you have a separate vlan for  voice and data with different ip subnets for voice and data. You will need to configure the dhcp pool accordingly.
    Here is the config guide for setting up IOS DHCP server:
    http://www.cisco.com/en/US/docs/ios/12_0t/12_0t1/feature/guide/Easyip2.html
    Here is the LAN qos recommendations:
    http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/7x/netstruc.html#wp1044009

  • HT5012 I am having difficulty XMIT/REC text messages to family members using Android phones?  I have a 3GB data plan and all switches and buttons are set properly.  Any suggestions?

    I am having difficulty XMIT/REC text messages to family members using Android phones?  I have a 3GB data plan and all switches and buttons are set properly.  Any suggestions?

        Hello APVzW, we absolutely want the best path to resolution. My apologies for multiple attempts of replacing the device. We'd like to verify the order information and see if we can locate the tracking number. Please send a direct message with the order number so we can dive deeper. Here's steps to send a direct message: http://vz.to/1b8XnPy We look forward to hearing from you soon.
    WiltonA_VZW
    VZW Support
    Follow us on twitter @VZWSupport

  • I am very annoyed at the Creative Cloud set up and the non-stop issues and problems

    I am very annoyed at the Creative Cloud set up and the non-stop issues and problems!  I am paying monthly for this service and it is constantly failing in some way!  So far in three months I have had to uninstall and re-install Photoshop THREE times because it stopped working properly and Illustrator I have had to do that same to TWICE!  That isn't including the other apps that have had issues!  I don't have the time to constantly be un-installing and re-installing all or some of the Creative Cloud because your developers are not making a product that works consistently for the money you are charging!  It is costing me more than just this monthly fee!  And I am even less impressed with the fact that I cannot email someone for assistance in resolving these issues.  Really Adobe?

    Adobe contact information - http://helpx.adobe.com/contact.html may help

  • HT2534 When I try to set up an Apple ID, it's asking for a credit card, and there is no "None" option, like this page suggests. How can I bypass this? This iPad is for a younger child who has no credit card, and will not need to make any purchases.

    When I try to set up an Apple ID, it's asking for a credit card, and there is no "None" option, like this page suggests. How can I bypass this? This iPad is for a younger child who has no credit card, and will not need to make any purchases.

    You can create an iTune and App Store account without credit card details
    1. Sign out of current Apple ID if you are sign-in to one (important)
    2. Go to App Store and select a free app
    3. Tap INSTALL APP
    4. Create New Apple ID
    5. Confirm Your Country
    6. Agree with Terms and Conditions
    7. Fill in your Apple ID and Password (you must create a new Apple ID; don't use your old Apple ID)
    8. Create and answer your secret question
    9. Select NONE for Payment Method
    10. Fill in Billing Address
    11. Submit application for new Apple ID
    12. Wait for verification email
    13. When email arrive, verify your account
    14. Start downloading your free apps

  • I upgraded my iPad to version 5.0, I had a message on my Setting to upgrade the software to version 5.0.1, I select install and during installation my iPad2 star rebooting and now doing it non stop. I have no time to restore or do anything

    Hi,  I upgraded my iPad to version 5.0, I had a message on my Setting to upgrade the software to version 5.0.1, I select install and during installation my iPad2 star rebooting and now doing it non stop. I have no time to restore or do anything. My ipad rebooting every 2 or three minutes

    See Here
    iPad Unable to Update or Restore
    http://support.apple.com/kb/ht4097

Maybe you are looking for

  • Cannot log in as an application user on Discoverer Desktop

    Hi I have Discoverer Desktop 4.1.37.00.0 on a laptop. When I try to log in as an application user, when in connect field I enter database name, I get the following error message: ORA-12154:TNS:could not resolve service name When instead of databse na

  • Is it possible to add a target amount to a query

    If I have a number being disagregated by Cost Center is it possible to add a target amount on a cost center level? I know we could add an attribute to Cost Center that hold a value for this target, but that could not be used in calculations or be sho

  • Monitor Screen Resolution

    I want to upgrade to a 24" monitor that uses 1920 X 1080 resolution, but I do not see that in the choice list in the Display preferences.  Where do I get a display driver to add that resolution?

  • Steps in Validation

    Hi, Can somebody forward me the steps related to Validation & substitution, its urgent. In T. code GGB0 ==> Line Item > Steps> check it is defined as : NOT BSEG-HKONT IN ZBANK What is this ZBANK ... is it the variable. How is my BANK GL Account relat

  • Wired Logitech Mouse not Working on Desktop only in Windows 7

    I used a wireless, but got fed up changing batteries so went back years ago to using a wired mouse when using Windows 7.   However, about 1 in 4 times, in the last few months, when I switch on my computer, the mouse will not let me choose if I want t