Setting a default announcements template

Is there any way to set a specific template for use in every individual announcement? I can see how it can be set on a per-announcement basis, but I'd like there to be a default chosen for all.

Hi,
If you are talking about a way to bulk update all items to another required template unfortunately is no.
You'll need to update the template within the individual new items at this stage.
Kind regards,
-Sidney

Similar Messages

Setting up Default web template for BeX 7.0 queries.

Hi Experts,
I am running a web-report based on a query created using Query Designer 7.0. I have a default web-template that I have been using for BeX 3.x queries [which has been created using WAD 3.X] and I tried to set the same template as default for the BeX 7.0 in SPRO>SAP Netweaver>Business Intelligence>Settings for Reporting and Analysis>BeX Web>Set Standard Web Templates>Ad Hoc Analysis.
But I can't see the changes being reflected in the web report after I made the change.I still see that the default template 0ANALYSIS_PATTERN is being used. Can we set a web template created using WAD 3.x as the default template for 7.0 Queries?If yes, do I need to do something else apart from the changes I did in SPRO?
Thanks
Arvind
Edited by: Arvind Pattabiraman on Apr 29, 2009 8:51 PM

Arvind,
Have you migrated your template to 7.0 ? you cannot use a 3.x template as the default for a 7.0 template... unless you are using the EP6.0 iView / ABAP stack for running your queries on the web...
Edited by: Arun Varadarajan on Apr 30, 2009 12:29 AM

How to set default Web Template for BEx Query iViews in Portal?

Hi,
1) In SPRO you can set the Standard Web Template used, e.g. ZANALYSIS_PATTERN1.
2) I published a query to Portal and when it runs within Portal, I want it to use a different web template, say ZANALYSIS_PATTERN2.
I don't want to change the BEx Web Application Query String property for each iView to hardcode the template e.g. to "QUERY=TestQuery1&TEMPLATE=ZANALYSIS_PATTERN2"
I only want the query name in the iView
Can I set this somewhere in Portal? I tried changing the standard "BEx Web Analyzer" iView as mentioned in
http://help.sap.com/saphelp_nw70/helpdata/en/33/39fa40ee14f26fe10000000a1550b0/frameset.htm (BEx Web Application or Query as iView in the Portal)
but it still seems to take the template from SPRO even after restarting J2EE

Hi,
I don't think anyone is holding back knowledge, I think it's sometimes difficult to filter out "good" questions as opposed to "bad" questions...
In any case, I don't think it's possible to have different default templates, eg one for the portal and one for the "rest". I'm afraid you'll have to either change each one on the portal or use one for all.
Cheers,
Dion

Cannot set default web template

Hi
I'm trying to set default web template through SPRO -> IMG -> Sap NetWeaver -> B.I -> Settings for reporting and analysis -> Bex Web -> Set standard web template -> Ad hoc analysis.
It works fine in Dev, but in Production the system seems to ignore the setting!
Even when I write a dummy template that doesn't exist I get no error message !
Please advice
Regards
Shlomi

D Nore did you found the way to do it ?
I still have the issue, whatever the place where I force the template, the queries on the portal does not use my specific template.
I tried :
pcd:portal_content/com.sap.pct/platform_add_ons/com.sap.ip.bi/iViews/com.sap.ip.bi.bexwebanalyzer
(this one was working before upgrade to netweaver stack 17).
as well as
pcd:portal_content/templates/iviews/sap_bw_report_iview
and
pcd:portal_content/templates/iviews/sap_bi7x_report_iview
none works !
If you have the tricks share it with us.

How to set default Web Template for BEx Query iViews in BI Portal?

Hi,
1) In SPRO you can set the Standard Web Template used, e.g. ZANALYSIS_PATTERN1.
2) I published a query to Portal and when it runs within Portal, I want it to use a different web template, say ZANALYSIS_PATTERN2.
I don't want to change the BEx Web Application Query String property for each iView to hardcode the template e.g. to "QUERY=TestQuery1&TEMPLATE=ZANALYSIS_PATTERN2"
I only want the query name in the iView
Can I set this somewhere in Portal? I tried changing the standard "BEx Web Analyzer" iView as mentioned in
http://help.sap.com/saphelp_nw70/helpdata/en/33/39fa40ee14f26fe10000000a1550b0/frameset.htm (BEx Web Application or Query as iView in the Portal)
but it still seems to take the template from SPRO even after restarting J2EE
(I just published this question in Portal forum but I think it belongs here instead since it is BI Portal - apologies for the double-post..)

D Nore did you found the way to do it ?
I still have the issue, whatever the place where I force the template, the queries on the portal does not use my specific template.
I tried :
pcd:portal_content/com.sap.pct/platform_add_ons/com.sap.ip.bi/iViews/com.sap.ip.bi.bexwebanalyzer
(this one was working before upgrade to netweaver stack 17).
as well as
pcd:portal_content/templates/iviews/sap_bw_report_iview
and
pcd:portal_content/templates/iviews/sap_bi7x_report_iview
none works !
If you have the tricks share it with us.

Error on page from BW 3.5's default web template

Hi Guru's,
We have a problem in our new BWD BW 3.5 environment where we are getting the "error on page" error from SAP-generated code and we arent sure why.
On our old BWT BW 3.0b platform, we have been using a modified version of the 0query_template called Z_QUERY_TEMPLATE. We did a system copy of BWT to BWD, our new BW 3.5 platform. At that point in time we would see our old BW 3.5 default template for queries that we ran. We wanted to see what the new default web template looked like in BW 3.5. We found where we could remove the Z_QUERY_TEMPLATE from the Web Adhoc Analysis web template setting so we could see the new features of the BW 3.5 default BEx query designer template instead of our old BW 3.0b default template.
Now when we run a query through the BW 3.5 query designer on BWD, we are using BW3.5s default template. The prompt web page is fine. No errors on page messages.
However, the initial presentation of the query results displays okay, but shows "error on page" in the message bar at the bottom of the displayed page. As soon as we do any navigation on those query results that error on page goes away. If we navigate back to the initial presentation, all is still okay. If we use the context menu to go back to start, we again get the error on page.
This error on page does not happen in BQ2 (our new BW 3.5 QA environment copied from our old BW 3.0b QA environment where we had not yet changed the default BEx Query Designer template to be Z_QUERY_TEMPLATE). We have tried several queries and in each case, we get errors on page in BWD, but not in BQ2. We used ultraedit to compare the view source output from the equivalent web pages from BWD and BQ2 and the only difference is the validity date of the data. There are no other differences in the javascript code generated by BW in the two platforms.
The statement that Internet Explorer is saying is the problem is the same in each of the cases we have checked and that is:
SAPBWSetFocus(anchor);
Error: Object expected
Code: 0
Its in the set_tab() function.
<script type="text/javascript">

</script>
Because the error goes away as soon as we navigate Im thinking some object isnt being created or initialized, but since the view source code of these pages are identical Im wondering if there is some code that should be executing before this page that is not happening in BWD for some reason.
Any help will be much appreciated.
Thanks,
Jeri

Heike,
Thanks for your help in this. BWD and BQ2 are both on the same SP. SAP_BW release 350 level 10 (SAPKW35010) with BI_CONT at release 352 level 5 (SAPKIBIEP5).
I invalidated the server cache following your instructions and tried again, but am still having the same problem in BWD. The initial display gets the "Done, but with errors on page" message until any navigation is done.
I am using IE 6.0.2900.2180.xpsp_sp2_rtm.040803-2158 when I execute queries on both BWD and BQ2.
Please, do you have any other suggestions?
Thanks,
Jeri

Access to customizing default: report templates

I seem to remember far back in the corners of my memory, someone here on the forum mentioning that although we didn't have access at the time (probably back at HTMLDB 2.0) to customize the default report templates, that there were plans to make this an option in a future version of Apex. Does anyone have any idea if this is something that is being planned, or better yet, available today?
If you're not sure what I'm talking about I'm referring to the field that says 'Report Template' in the 'Layout and Pagination' section of the 'Report Attributes' page in the application builder.
The problem I'm having is that I'm using the 'default: vertical report, look 2 (show null columns)' report template and I've got some long column headings that I want to include a line break between each word of the heading, so they're stacked vertical instead of wide horizontally. I've add HTML break tags to the headings but they're disappearing when the page is rendered.
I've made sure to set the 'Strip HTML' setting to 'No', but whether it's set to yes or no doesn't matter, the headings display the same either way.
BTW, doing the same thing in a template based multi-row report seems to work fine. However, trying to use/apply the 'Value Attribute Pairs' report template yields the same result as the default vertical look template.
So I have 2 questions:
1) anyone know how I can make these heading words stack up vertically, one word to a line?
2) are we going to get access to customize the default report templates?
Earl

Hello,
1) anyone know how I can make these heading wordsstack up vertically, one word to a line?
Probably the best way to do this is to just hard code
a <br /> between your words.That's exactly what I'm doing (and what I said in my original post), however those breaks are disappearing during page rendering when I choose the report templates I mentioned.
I don't understand why this technique works in the multi-row report templates and not in these vertically oriented value/attribute report layouts.
2) are we going to get access to customize thedefault report templates?
No, you should just use a regular theme based
template, the default report templates are there for
backwards compatibility and well basically for people
that don't care about the UI. Since your at the point
it seems you do care about UI the proper thing to do
is to move to a standard report template that you
have full control over.Fair enough. I'll look into that, but I think there's still an open question here as to why the HTML breaks aren't being returned in the page markup for these report layouts.
Regards,
CarlEarl

How can I set the default home page for all new users in Firefox 4

I'm trying to deploy FF 4.0rc1 in a corporate environment but I can't find a way to set the default home page or any other settings for that matter.
Is there a way to set the default home page for all new users and lock it so that the users can't change home page?
Best regards
Jonas

In Firefox 4 the template folder for new profiles (C:\Program Files\Mozilla Firefox\defaults\profile\
) doesn't exist. You can create that \defaults\profile\ folder and place a file user.js in it with the prefs that you want to initialize.
See:
*http://www-archive.mozilla.org/catalog/end-user/customizing/briefprefs.html
You can also use a mozilla.cfg file to set the default value for prefs.<br />
See: http://kb.mozillazine.org/Locking_preferences
defaultPref(); // set new default value
pref(); // set pref, but allow changes
lockPref(); // lock pref, disallow changes

Fix table header line of Query in default web template WAD 7.0

Dear all,
I would appreciate if somebody could help me to set parameters to fix the header line of a Web-Item DataProvider (Query) in the default web template 0ANALYSIS_PATTERN for the BEx Web Analyser. I mean I want to see the header line with the characteristics and key figures description even if I scroll down in the query.
My idea was to create a second frame in the template and to fill it with the same DataProvider just with the header of the Query. The problem is that the performance of the query would be badder if we load two Dataprovider/Query instead of one.
Many thanks in advance for your answer and help!!!
Best regards
Abdel

Hi Dion,
Thank you very much for your answer! I have tried to find a paramter in the web application designer to do that, but without success. Now I have included a new container with the same Analysis Web Item, but it does not function! May you have a better idea??
Thank you very much in advance for your help. I'll also post my question in a BI-Forum as you suggested.
Best Regards
Abdel

Setting a default folder view for all folders in Windows 7

How do you set up a default folder view of "List" for ALL the folders in Windows 7 including the optical drive?
Artoo

I just installed windows 7. Are you seriously telling me that i now have all folders with mp3s in them AUTOMAGICALLY (THANKS FOR THE HANDY HELPING HAND THERE MICROSOFT!!!) set to some designers whim of what an mp3 folder "SHOULD" look like?
Well i was going to write a big rant, and indeed did, but then i was doing some more research and it seems like i just made everyones day and solved the problem (partially). Or well THIS guy did:
http://www.howtogeek.com/howto/16694/customize-the-five-windows-folder-templates/
After you’ve clicked OK, visit some of the other folders in your file system. You should see that most have taken on these new settings.
What we’ve just done, in effect, is we have customized the General Items template. This is one of five templates that Windows Explorer uses to display folder contents. The five templates are called (in Windows 7):
General Items
Documents
Pictures
Music
Videos
When a folder is opened, Windows Explorer examines the contents to see if it can automatically determine which folder template to use to display the folder contents. If it is not obvious that the folder contents falls into any of the last four templates,
then Windows Explorer chooses the General Items template. That’s why most of the folders in your file system are shown using the General Items
template.
Changing the Other Four Templates
If you want to adjust the other four templates, the process is very similar to what we’ve just done. If you wanted to change the “Music” template, for example, the steps would be as follows:
Select a folder that contains music items
Apply the existing Music template to the folder (even if it doesn’t look like you want it to)
Customize the folder to your personal preferences
Apply the new template to all “Music” folders
A fifth step would be: When you open a folder that contains music items but is not automatically displayed using the Music template, you manually select the Music template for that folder.
Anyways, sorry that explanation doesnt do it justice. I have spent waaay too much time trying to figure this out already. Also that link doesnt say how to 1) copy templates (are they file or registry based?, didnt do research) 2) if you can distable templates
or the automatic re-templating of folders.
THAT is what i want to know! as it is much more maintance then its actually worth...
but once i had set 5 default types to, the exact same thing... it now doesnt matter if it automagically switches it. SUCK IT MS AUTOTUNE!!!
Its bloody hard to frame this question too. What can you say about this? "folder changes to mp3" "customize folder types windows 7" "windows 7 folder changes to mp3" "dont automatically change folders to mp3" "how
to change mp3 details column for good" "automatically change column order win 7 mp3"
The search that actually solved it:
"do not apply default template to mp3 windows 7"
good luck, this worked for me!
EDIT: also i just noticed that neonr already answered this above. i just didnt read it carefully enough. anyways i guess i will leave this and mark his as answer.

How to set a default font

Hiya!
I'm making a flyer in inDesign and i want to set a default font to run throughout the document whenever i create a text box. I also want the font size to be set at 10pt all the time. Does anyone know how to do this?
Also - i have a template for the flyer which includes a border and table.... i want to be able to open this as a template for each flyer, which i can then fill in with information. Is this possible?
Any pointers would be super appreciated.
thanks

Just deselect any item in the document you are working on and set your font and other variables in the font window/bar. Thats all. If you wish to set a standard font for all new document, than close all documents and set the things. This works for almost everything.

How to set a default page setup in P6?

Hi,
Anyone know how to set a default page setup in P6?
Thanks,
Manuel

Hi Manuel,
For printing, the settings are stored within the layout. If you have one layout containing the settings you use, you can then use this layout as your template and do a 'Save As' every time you make your changes.
Hope that helps
David

E61 - How can I set up an email template with prfi...

I need to set up my e61 with a default email template that includes company information and disclaimers. Also I need the bcc field to contain a pre-defined email address. Is this possible?

Hi there
I want to set up an email marketing campaign - i have a database of approx 200 email addresses...

Setting the default font

Hey,
I was just wondering if there is a way to set the default font to whatever you want. It is especially frustrating for footnotes (no matter how many times you change the font of your footnotes, every subsequent footnote is created in the default Helvetica).
I've looked around in Help and such but can't find any option to set the default font.
Thank you!
Jesse.

Jessiah87 wrote:
Hey,
I was just wondering if there is a way to set the default font to whatever you want. It is especially frustrating for footnotes (no matter how many times you change the font of your footnotes, every subsequent footnote is created in the default Helvetica).
I've looked around in Help and such but can't find any option to set the default font.
I described several time ways to do that.
It requires surgery in the index.xml file describing the used template.
Assuming that the used template is Blank.template.
Create a new document using it.
Save it as my_Blank.pages.
Using the scheme which I described many times, open its index.xml file.
To do that I use the free TextWrangler.
Search for "footnote" to reach this block of code :
You see the entry spelled <sf:fontName/>
Edit it as :
<sf:fontName>
<sf:string sfa:string="LucidaGrande"/>
</sf:fontName>
to get :
Of course, you may use an other fontname.
The rule is to use the official internal fontname.
I already posted a long list of such names.
Save the edited index.xml file
If the original document contained a index.xml.gz file, remove it so that when you will open the doc it will be forced to use the edited index.
Create a new document
Leave it empty and save it as a custom template : my_Blank.template in the dedicated folder.
Each time you will create a document starting from this template, the footnotes will be automatically created using LucidaGrande
Some lines below the fontName descriptor is the fontSize one.
The default one is :
<sf:fontSize>
<sf:number sfa:number="10" sfa:type="f"/>
</sf:fontSize>
You may edit it as
<sf:fontSize>
<sf:number sfa:number="9" sfa:type="f"/>
</sf:fontSize>
or an other integer value so the footnotes will default to this fontSize.
Of course, double check what you do.
When you will be satisfied of the result, maybe you will wish to edit the inthebox template.
It may be done but it's an other story.
Yvan KOENIG (VALLAURIS, France) dimanche 6 mars 2011 21:50:14

HT2509 Can I set a default font to all my emails on iCloud?

How do I set a default font for all my outgoing emails on iCloud?

G'day 5508,
Some thoughts. Try System settings first (this may not be the culprit).
System Preferences > Language and Region > Advanced > Currency > Australian Dollar
I can only adjust the currency cell by cell, column by column page by page.
Forgive my stupidity, but if the currency is a cell format in the template, can you select all currency cells at once, then change the currency? You will have to do this separately for each Table, but within a Table, you can select a range of cells. Quicker than cell by cell.
Once you have reformatted the document that emerged from that template, save the document as a template with the same name to overwrite the old template.
Hope this helps, mate.
Regards,
Ian.

Setting a default announcements template

Similar Messages

Maybe you are looking for