Setting A default view per location per user VSM7.6

Hello
Is it possible to define a default view for each location per user with VSM 7.6 ?
In other words, I would like for a user X , once logged, when he hits any location name, he gets a default view composed of all or a subset of the cameras with the secondary stream .
Is this possible with VSM7.6 ?
thanks.

Hi,
First enable that end user can set rows per page displayed. (that you did disabled)
Run page. Set rows per page to report to 10.
Save default report from action menu.
Then disable that end users can not set rows per page.
Regards,
Jari

Similar Messages

  • "I would like to know how to set the default view for the columns. Somewhere I read it could be done in by music icon under Library.  Can't find it.  Thanks

    "I would like to know how to set the default view for the columns that are shown in iTunes. Every time I open it, I have to either go to the options, or right-click to get the pop-up options, and delete "rating" and add "composer." I'd really like to just do it once and be done with it."  Somewhere I read you could do this by clicking on the Music icon under LIBRARY then arramge the columns.  Trouble is, I can't find a Musi Folder or icon in my user library.
    Any help would be appreiated.  OSX 10.9.2  iTunes version 11.1.5  Thanks!!! CW!

    From the iTunes menu bar try View>Show View Options.  Make sure what you want to see is checked and what you don't is unchecked.  You can do this (may need to do this) for any playlists, your main Library, etc.
    Good luck
    srb

  • How do I set the default welcome page for PUBLIC user

    gurus,
    i'm using -
    Oracle 9i Database
    Oracle 9ias Portal Release 2
    QUESTION => how do I set the default welcome page for the PUBLIC user.
    i did the following to achieve this -
    1. logged into portal
    2. clicked on builder
    3. clicked on administer tab
    4. selected PUBLIC user in the Portal User Profile portlet
    5. went to the preferences tab
    6. in the default home page selected a custom page group
    7. logged out of portal
    8. open a new browsere session
    9. type the portal URL and i get the login page ....??
    i'm unable to understand this behavior ... shouldn't i be getting the page group that i set for the PUBLIC user in step 6 above ....
    the second QUESTION is => when the user logs out he/she should see the PUBLIC page set in step 6 above ... but, instead the user sees a page that is as follows -
    Partner Application Name Logout Status [Logout Status]
    Oracle Portal (portal) logout status
    The SSO Server (orasso) checkmark
    buzz.resva.trw.com:7778 checkmark
    infrastructure.happy.resva.trw.com checkmark
    portal1.buzz.resva.trw.com checkmark
    portal2.sylvester.resva.trw.com checkmark
    sylvester.resva.trw.com:7778 checkmark
    so, how can i set the default page for the PUBLIC user and also a page when he user logs out.
    ideas anyone ....?
    thanx a bunch.
    hero

    Hi,
    The sequence of operation you are doing to set the home page for public users is correct. You are getting the login screen as the "custom page group" selected as "home page" has not been granted to public.
    Also, while logging-out, it is normal behaviour to get the screen where it shows the list of partner applications from where user has been logged-out. When you click on "Return" button, you will get to the "home page" set above.
    Hope it clarifies the things.
    Regards,
    Ved

  • How do I  set the default view size when I open a word.doc from mail

    I use the mail program all day long and open MS Word docs and the size is default of 100% but the actually view of the screen make it look like a font of 7 or 8
    I have a difficult time even viewing the document until I blow it up to 150%. It's not because I'm blind I have excellent vision..
    HOW DO I SET THE DEFAULT VIEW OF DOCUMENTS

    This document can help you set the print settings for any type of printing. Not just for photos as the title suggests. You should not have to keep setting it every time.
    Printer settings
    007OHMSS
    I was a support engineer for HP.
    If the advice resolved the situation, please mark it as a solution. Thank you.

  • In mini bridge how do I set the default view to the filmstrip?

    Hello,
    In mini bridge how do I set the default view to the filmstrip?
    Thank you.

    Mark, there's a very basic .NET method on every nullable object:
    GetValueOrDefault
    EDIT: Now I see...please avoid duplicating
    questions...
    To be clear:
    Put GetValueOrDefault on every nullable field used inside your 'TotalDue_Compute' sub
    You don't need to define 'TotalDue' as Nullable anymore

  • How to set different default interactive reports for different user groups?

    I'm probably overlooking an obvious solution, but how do I set different default interactive report for different user groups?
    For the same interactive report, I want one set of users to see a default where the default filter is based on column X. However, another group of users doesn't have authorization to see that column so I need to set the default filter to something else for them.
    Thanks

    You can set a filter on a report in a URL - would that help? I think with apex 4.x you can also link to a saved default report or alternative report...

  • Is there a way to set the default view for the App Store to only show Apps for iPads when the Store is launched?

    I'm a new iPad owner and would like to set the default view for myself to show only Apps for the iPad when I launch the the App Store app. Showing apps for iPhone seems a waste of real estate for me and time spent searching for a particular app since I do not own an iPhone.
    Thanks for any assist. :-)

    Hi ..
    That's not possible as yet but you can provide feedback to Apple here.

  • How to set the default view (Alphabetic) in CCM ?

    Hi guys,
    Easy question for smart guys =)
    In CCM we have 2 views: groups and index (alphabetic).
    How can I set the default view ?  
    For example, I would like to have always the index view (alphabetic)
    Thanks for your help guys !
    regards,
    Diego

    Hi diego,
    I think you have to modify directly bsp for this.
    Regrads,
    Bertrand

  • How to set the portlet preference per user instead of global setting

    Hello All
    I am using IBM JSR168/ JSF, In my portlet Edit mode I am trying to set a value per user preference , but it always set for all other users even this is just a normal user, I think when an administrator set any preference value then those preferences value will be set for all the users. but in my case it is a normal user has right for the edit mode and hence the preference set by the user in edit mode will be set for his portlet instance only. So why it sets for all the users preference???...... Thanks a lot for your help!!!
    here is my code:
    ///////////portlet.xml//////////
    <preference>
                        <name>RowsPerPage</name>
                        <value>25</value>
                        <read-only>false</read-only>
                   </preference>/////////////////////////pageCode in edit mode do the save action/////////////////////////
    public String doSaveAction(){     
               FacesContext ctx = FacesContext.getCurrentInstance();
                  HttpSession session = (HttpSession)ctx.getExternalContext().getSession(false);
                  if(session != null) {
                       session.setAttribute("save", "save");
                       session.setAttribute("Number",Integer.toString(getNumber()));
               return "";
    }/////////////////////store the preference value///////
    public class MyPortlet extends FacesGenericPortlet {
    public void processAction(ActionRequest actionRequest, ActionResponse actionResponse) throws PortletException {
              try{               
                //String save1 = actionRequest.getParameter("save");
                String save = (String) actionRequest.getPortletSession().getAttribute("save");
                if (save != null){
                   PortletPreferences prefs = actionRequest.getPreferences();
                   String number= (String) actionRequest.getPortletSession().getAttribute("Number");
                   prefs.setValue("Number", number);
                   prefs.store();
              }

    Hope someone really can help me for this issue... I just wondering is this related to the user group config in portlet, since the interesting is that this issue is not apply to wpsadmin , but not sure where and how to set other user group that can set the preference no problem??
    Thanks for your time !

  • Default view size/location for files in Preview?

    Hello,
    This is probably a stupidly simple question, but is there a way to set the default location and size of all pdf files opened in preview?
    I know how easy it is to set window parameters in the finder: simply resize the window before closing and it remembers the new size/location. Preview will remember the location when the app remains open, yet when I quit the program and open the same PDF file again, its back in its original location, which somehow got set off center on my 2nd monitor so it cannot be read without constantly adjusting upon opening. (example: http://www.avartists.com/Picture.gif
    As you can imagine this can get VERY annoying. Any help in fixing this issue would be greatly appreciated! Thanks in advance for your help.

    Deleting the plist file had no effect whatsoever with my Preview. You can try it if you want. If you have custom settings of various sorts you can just move the plist file to the Desktop, then start Preview. If the annoying behavior is gone then you can toss the file on the Desktop and keep the new plist file. If it still behaves the same way and you want whatever preferences you had set before, just quit Preview and move your original file back, say yes to the "replace dialogue" and you're back where you were.
    Francine--who obviously has spent way too much time on stuff like this!
    Francine
    Schwieder

  • Set a default view in iTunes for all playlists created

    Hi
    Is there a way to set either List, Grid or Artist List as the default view for all playlists or smart playlists?
    Everytime I create a playlist it automaticaly uses List, I dont want that I want Artist List
    thanks ;0

    Hi
    There's no such option in my case.

  • How to configure and set a default view for contents of a data set

    Here is my scenario:
    I have a document library where each item is a "Plan".  "Plan" is of a custom content type that inherits from a Document Set content type but has some additional attributes such as Plan Type.  Inside each Plan, each item is
    a Plan Document which is of custom content type Plan Document which inherits from Document content type but has some additional attributes e.g. Document Status.
    So the hierarchy is:
    All Plans (document library)
         Plan 1  (custom content type that inherits from Document Set but also has a "Plan Type" attribute)
                 Plan Document   (custom content type that inherits from Document but also has a "Document Status" attribute
    When I click on the document library, I want to see all the folders (e.g. Plan 1) where one of the columns will be "Plan Type"
    When I click on an individual Plan (e.g. Plan 1) I want to see the contents of that custom document set.  At this point, since this page shows contents of one document set, I want to see the column "Document Status" but NOT Plan Type since
    Plan Type applies to the document set as a whole, not to an individual item in that document set.
    However, I don't think I have it set up correctly because right now the "Plan Type" column is visible both on the list of all document sets AND on the page that shows the contents of one document set.
    I've found a discussion on this topic here:
    http://sharepoint.stackexchange.com/questions/61565/how-can-i-set-a-custom-default-view-for-a-document-set
    where one person said "When you click on a Document Set content type in library settings, one of the options is "Document Set settings". The last option in this dialogue allows you to select a defined view on the library that will be used
    to show the contents of that Document Set."  I don't see that view selection.  The last item on the document set settings page is "Update List and Site Content Types".  The field before that is for customizing the Welcome page. 
    However, I don't want to customize the Welcome Page as a whole, I just want to customize the columns that are displayed on the list of content of this document set.
    thanks

    I finally found the answer:
    At the document library level, create a new view to use when displaying the files in the document set
    Go to the document library settings
    Select your custom content type (in my case it was "Plan")
    In the next screen select Document Set settings
    Select your newly created view at the Welcome Page View section
    Press Ok
    Now the default All Documents view will be shown when displaying all the document sets and the newly created view will be displayed when viewing one document set with the files within.

  • How do you set the default view of a PDF portfolio to be the Files mode?

    I can set my personal view of portfolios to that, but if another user opens it, it shows the preview mode. It needs to be accessible, and I read Files mode is the only way. We want to load a PDF portfolio onto our internet for anyone to view, but it needs to open in the Files mode. Thanks

    I have done this.
    Have a hidden input field on form  <input name="ZoneExpiry" id="ExpiryDate" />
    Then have a function as follows:
    var dat=new Date();
                                                      dat.setDate(dat.getDate() + 365);
                                                      var monthname=new Array("Jan","Feb","Mar","Apr","May","Jun", "Jul","Aug","Sep","Oct","Nov","Dec")
                                                      var pretty = dat.getDate() + "-" + monthname[dat.getMonth()] + "-" + dat.getFullYear();   
                                                      jQuery("#ExpiryDate").val(pretty);
    Hope this helps.

  • To set a default role according to the user.

    Hi,
    I would like to set different default roles according to users. For example, we have the following prerequisites:
    1) 3 roles: roleA | roleB | roleC (in this order).
    2) 3 differents users: user1, user2, user3.
    So, if I log-in with the user1, the default role should be the roleA; if I log-in with the user2, the default role should be the roleB; and so on.
    But I don't want to change the order of the roles using "sort priority" property.
    How can I do this?
    Thanks,
    Samantha.

    Hello Samantha,
    Does each of the users need to have each of the roles? If not you could just not assign the other roles except the one you want to display as default role (a assume you mean the role that is displayed first after logon).
    If each of your users need every role, I am afraid your requirement is not realizable unless you use the sort priority property. Why don't you want to use it in the first place?
    On possible yet circuitous way to meet your requirements would be the following:
    Create another role for each of your user(-group)s. Say in your case Role 1, Role 2 and Role 3 which are not defined as entry points.
    Assign roleA, roleB and roleC to Role 1 where roleA has the lowest sort priority; and assign user1 to role 1.
    Assign roleA, roleB, roleC to Role 2 where roleB has the lowest sort priority; and assign user 2 to Role 2
    and so on.
    Of course you need to use sort priority for that and I think thats hard to maintain. (probably not even what you are looking for)
    Maybe you can get a litle more concrete what you are trying to achieve.
    best regards
    Stefan

  • Acrobat Standard 6.0 Set as Default Viewer, but Browser is looking for Adobe Reader 8 or 9

    All,
    I use Adobe Acrobat Standard 6.0 for viewing and creating PDF's.  Just a couple of days ago, I tried opening a patent document I found on Google.  The browser displayed the following error:
    "The Adobe Acrobat/Reader that is running can not be used to view PDF files in a Web Browser.  Adobe Acrobat/Reader version 8 or 9 is required.  Please exit and try again."
    So I looked for an update for Adobe Reader and downloaded Adobe Reader 9.1.2.
    The next PDF document that I opened came up in Adobe Reader....NOT Adobe Acrobat.  The installation must have changed the default viewer.  So I right-clicked on the PDF file icon and selected OPEN WITH Adobe Acrobat.  I clicked the checkbox to "Always open with this program..."  This seems to have fixed the default viewer problem, as PDF files now open with Adobe Acrobat Standard...just the way I want things to work.
    I still have the problem of not being able to open many documents within a browser...I think because the browser is looking to open the PDF files in Adobe Reader 9.1.2, NOT Acrobat 6.0.  But Adobe Acrobat is now the default viewer.
    Does Acrobat function independently of Reader?  Or is Reader a module that is required for Acrobat to function properly?  Whatever the case may be, can somebody suggest a fix for this problem?
    Thanks,
    Neal
    [email address deleted by host]

    They do not require each other for running as mentioned. There are some modules in common and that is where you run into problems. There are issues with the parts that remain resident also. I would suggest you follow the other advice you have been given. Unfortunately, there are some PDFs that may not open correctly in AA6. You may have run into some of those.

Maybe you are looking for