Setting a notification sound for reminders

Any suggestions about changing the alert sound for Notifications.  Tried resetting the Alert Sound, in Sys Pref>Sounds, but Notifications continues to play the Basso sound even though another sound is selected.

if you go to settings-notifications-scroll down to facebook-then select what alert style you want.  then whenever one of your friends posts it should pop up a notification. 
to change the sound you hear, go to settings-sounds-you should then be able to choose what sound plays when the notification pops up
let me know if this solves your question,
Allen

Similar Messages

  • IS THERE A WAY TO CHANGE THE NOTIFICATION SOUNDS FOR REMINDERS?

    IS THERE A WAY TO CHANGE THE NOTIFICATION SOUNDS FOR REMINDERS?

    Yes you can, in the sense that this is an "Alert" sound you've set for the whole Mac software, and of course this is set in System Preferences > Sounds > Sound Effects. This will change the "alert sound" for the whole Mac.
    So, No, you can't change only this particular Alert sound. If you could, it would be done in System Preferences > Notifications, and your only option there is whether you want the sound or not (Chkbox on "Play sound when receiving Notifications")

  • How to create unique notification sounds for email on Droid Incredible 4G LTE

    I have three separate email accounts pushed to my Droid Incredible 4G LTE.  I can't for the life of me figure out how to set up unique notification sounds for each email account.  It was a snap to do on my old Blackberry.
    Same question for flagging individuals within my contact list.  (E.g., if my wife calls it makes one sound, if a client calls it makes a different sound.)
    Does anyone know how to do this, or, as they say, is there an app for that???
    Thanks in advance!

    I don't think you can on the email but got to each contact and edit them for different sounds, I'm not sure if it works on that new phone that way but as they don't have a dedicated room yet for it you had nowhere else to ask htc has good forums also

  • I am not getting any notification sounds for facebook version 47423

    I am not getting any notification sounds for facebook version 47423.  Also, how do you change your email address in your profile here in the forum?  Thanking you in advance.

    Try going to setting and go down to facebook. See if you can change anything there. If you can't then go to Sounds(in settings) and try looking for facebook there. i havn't had this problem but that is about the right steps to solving it

  • How can I disable the notification sound for remaining credit messages

    My operator sends me a message after every call and text which tells me what remains of my monthly allowances. This is very useful and I don't want to turn it off. I've just got myself a Z10 and the only thing that annoys me about it is that I have not yet found out how to disable the notification sound for this type of message. The device is stock with the latest firmware and no apps.
    I can change the notification for normal text messages in the settings, but there is no obvious entry to change for these messages. Does anyone know how to do it?

    Zotan wrote:
    My operator sends me a message after every call and text which tells me what remains of my monthly allowances. This is very useful and I don't want to turn it off. I've just got myself a Z10 and the only thing that annoys me about it is that I have not yet found out how to disable the notification sound for this type of message. The device is stock with the latest firmware and no apps.
    I can change the notification for normal text messages in the settings, but there is no obvious entry to change for these messages. Does anyone know how to do it?
    If the message comes in the (bell) notifications it can only be switched OFF globally.
    If it is a text message, you can create a contact with the number, then Setting - Notifications - Contacts - Customise - Phone Calls, Email Messages, Text Messages, Other Messaging

  • No notification sound for face time

    I don't get a notification sound for face time..people have to call my phone to tell me FaceTime is ringing. Yes, I checked the sound setting also.

    Did you check the usual suspects?
    1. Do you have your ringtone volume up?
    2. Make sure the device isn't muted. See here: http://support.apple.com/kb/ht4085
    3. Make sure Do Not Disturb is off. Swipe up from the bottom if th screen to access Control Center and make sure the moon icon is not lit.
    4. Make sure the sound you set for your FaceTime Alert Sound is something that is loud enough for you to clearly hear. Tapping the sound will give you a preview.

  • Is there a way to change the notification sound for the FB app

    is there a way to change the notification sound for the FB app?

    Go to: Settings, Sounds and look for Facebook Post.  You can click on it and select which sound you want.

  • I have OS 10.9.4, and I can't change the basso alert sound for Reminders.  Works ok for the rest of the applications that use an alert sound.  Help?

    I have OS 10.9.4, and I can't change the basso alert sound for Reminders.  Works ok for the rest of the applications that use an alert sound.  Help?

    http://www.microsoft.com/mac/support
    http://answers.microsoft.com/en-us/mac/forum/macword?auth=1
    http://answers.microsoft.com/en-us/mac/forum/macoffice2011-macword/microsoft-wor d-for-mac-2011-will-not-open-error/ecc42616-6f49-40bb-b8f5-e21c711ea359

  • Turn off new mail notification sound for a particular folder?

    Is there any way to turn off new mail notification sound for a particular folder? I want new mail sound for my in box and most other folders but for example when I filter high-volume mail lists into a sub folder I don't want the new mail sound to play.

    Mail ▹ Preferences ▹ General ▹ New messages sound: None

  • How do I change notification sound for Scanner Radio Deluxe?

    How do I change notification sound for Scanner Radio Deluxe?

    Hi,
    Tap the iPod icon in the Dock. Then tap the Airplay icon just to the right of the volume slider.
    Make sure the iPad speakers are selected, not your wireless.
    Carolyn 

  • How to set up notification email for Full CPU utilization on OEM12c?

    I have found a Oracle Doc,Is that's the way email notifications are setup?How can i check that after setting the notifications?
    4.1.2.3 Subscribe to Receive E-mail for Incident Rules
    An incident rule is a user-defined rule that specifies the criteria by which notifications should be sent for specific events that make up the incident. An incident rule set, as the name implies, consists of one or more rules associated with the same incident.
    When creating an incident rule, you specify criteria such as the targets you are interested in, the types of events to which you want the rule to apply. Specifically, for a given rule, you can specify the criteria you are interested in and the notification methods (such as e-mail) that should be used for sending these notifications. For example, you can set up a rule that when any database goes down or any database backup job fails, e-mail should be sent and the "log trouble ticket" notification method should be called. Or you can define another rule such that when the CPU or Memory Utilization of any host reach critical severities, SNMP traps should be sent to another management console. Notification flexibility is further enhanced by the fact that with a single rule, you can perform multiple actions based on specific conditions. Example: When monitoring a condition such as machine memory utilization, for an incident severity of 'warning' (memory utilization at 80%), send the administrator an e-mail, if the severity is 'critical' (memory utilization at 99%), page the administrator immediately.
    You can subscribe to a rule you have already created.
    From the Setup menu, select Incidents, then select Incident Rules.
    On the Incident Rules - All Enterprise Rules page, click on the rule set containing incident escalation rule in question and click Edit... Rules are created in the context of a rule set.
    Note: In the case where there is no existing rule set, create a rule set by clicking Create Rule Set... You then create the rule as part of creating the rule set.
    In the Rules section of the Edit Rule Set page, highlight the escalation rule and click Edit....
    Navigate to the Add Actions page.
    Select the action that escalates the incident and click Edit...
    http://docs.oracle.com/cd/E24628_01/doc.121/e24473/notification.htm#CACHDCAD

    Make sure you have correct thresholds...
    from target home>monitoring>"Metric and Collection Settings"
    Check the incident rule for warning and critical events for host targets
    Setup>Incident>Incident Rules

  • Headphone, notification sounds for xperia z2

    It is so annoying. Even when i have my phone on silent, the notification sound is still on when i plugin my headphones! how do i turn of notification sound when i have my headphones in!!!!!
     Help ME!!!!!! 

    Yes and no. You have to go back and add a notification sound when done listening. This is asinine. Never had this issue with my 4 other android phones. It may honestly be the reason I break warrenty and just flash Cyanogen

  • Mail sound settings set to None but still receive notification sound for all new mail

    My sound settings for new mail are set to Alert Tones: None, Vibrate Only, but I still receive a sound notification for all new mail.  Why is my phone not recognizing the setting?  I have turned off and back on the phone numerous times hoping that would help, but it has not.  How can I make the phone recognize the settings that I have purposefully set?

    afhammerC,
    So I understand: you have friends whose iPhone 4S's do vibrate when mail is received in silent mode, and no sounds are selected for new mail, but vibrate is selected for silent mode?
    Just want to be clear.
    My wife has an iPhone 4S 16gb, and it appears she has the same problem as well. 
    As an aside to the issue, I really wish there was a way to have a timer on the notification center so we could put one, many, or all apps' notfication to sleep during a specific time period (say, during the night).  V. annoying to have to disable notifications separately.  Would love a way to turn them off between, say, midnight at 6am.

  • How can I set a due date for reminders?

    I DO NOT want it to remind me at a certain time. I just want it to be due on a certain day. You used to be able to do this when the reminders were part of the calendar on icloud.com, but now you can only set a day AND a specific time for an alert about the reminder, which I don't need.
    And as far as I can tell, you can't change it on the iPhone either. I'm guessing you can still change it on the iCal app on an actual Mac, but the whole point of icloud is that I don't have to carry my computer with me everywhere I go.

    I found a round about way to get the DUE feature.    
         click <<remind me>> and set a day
         select <<daily>>
         clink <<done>> and exit
    go back into the same reminder and you should see a due feature. 
    I then removed the reminder, but kept the repeat. As I use this for a check off for my bills.
    I think this only works if the date you select initially is in the future.
    Let me know if that works,
    morenalx

  • Setting balance of sound for earphones

    Any way of changing the balance setting on the 3rd gen Nano? I have partial loss of hearing in one ear and need to up the volume in the affected ear. If no software or setting cure, any suggestion on a good set of in ear noise cancelling or suppressed earphones that has separate volume for each ear?
    I

    JH,
    I have the same problem. I found this, but read my warnings below the link:
    http://www.sennheiserusa.com/newsite/productdetail.asp?transid=005248
    It does work, but does not amplify; depending on your hearing loss level, (mine's about 70%) the sound will end up stereo, but pretty quiet.
    ALSO, the device is fairly large and thick, AND the cord is 20 feet long. If you're handy with a soldering iron, you can shorten it, but be aware that the wires are the very fine individually stranded/coated kind, so you'll have to sand the plastic coating off the very fine strands in order to get the solder to really stick the wires back together.
    Good luck ever hearing back from apple on this, I've asked them several times (online help, email, phone) if they have any hidden balance control / ADA patch type software, etc... when they don't just ignore me, and actually respond, they tell me that the ipod is perfectly balanced in the factory, and if mine is not working, I should send it for repair.
    Apple pretty much doesn't give a rip about the thousands of people who have hearing deficits to one degree or another.
    If you have better luck with a hardware device, please post it here, I use the one above, but it's almost more trouble than it's worth.
    Also, don't go out a buy a new ipod in hopes that they've fixed it, mine's 5th gen, and if they do have balance control, there's no easy way to tell how to adjust it.
    Message was edited by: KarlFlick
    Message was edited by: KarlFlick

Maybe you are looking for

  • Bg color

    Can I change the background color of a browser window opened by a behavior?  

  • Exporting a Sequence of Images

    I have an image sequence of about 250 images and I want to export them as a QT Movie but I am overwhelmed at all of the settings within Quicktime Pro. Is there a tutorial somewhere that explains the settings in Quicktime Pro and explains which settin

  • Approved PO's are faxed to the vendor, we would like to change  to email

    hi gurus,         This is for company code AC01, We do have vendor XXXXXX  where all approved PO's are faxed to the vendor, we would like to change this to email instead. How are we doing this? I SEEN In the po messages,there it is blank displaying.

  • Update Property Promotion Column Value in InfoPath Document Library

    Hello All, I just tried to update a property promotion value using this code: using (SPSite site = new SPSite(webName))                     using (SPWeb objweb = site.OpenWeb())                         SPList spList = objweb.Lists["XYZ"];            

  • Edge multiple composition animations won't work in Chrome

    I am having problems when rendering a multiple composition in Google Chrome. What's happening eventually is that when I resize the browse window up above the 698px in height, the backgrounds on the website start to disappear, and they keeps disappear