Setting a password for user access on AIR-SAP1602I-A-K9 running 15.2(2)JB2
I am trying to assist a group with setting up their AIR-SAP1602I-A-K9 stand alone WAPs. I would like to know how to set a password for clients to access the wireless network through these units. I have been spoiled with our controller based WLAN.
If you are doing it from the CLI
dot11 ssid Test
authentication open
authentication wpa version 2
wpa-psk ascii 0 "your key here"
Interface Dot111Radio 0|1
encryption mode ciphers aes-ccm
ssid Test
If you call a VLAN under the SSID, then you need to call a VLAN with the encryption statement under the radio interfaces.
If you are doing this from the GUI:
http://www.cisco.com/c/en/us/td/docs/wireless/access_point/12-4_10b_JA/configuration/guide/scg12410b/scg12410b-chap11-authtypes.html
HTH,
Steve
Similar Messages
-
I have transferred files from PC to IMac using Migration assistant. This has automatically set-up new users on the IMac and I can't access these. As administrator, I have set-up passwords for these new users, but when i try to acces these new users usung those passwords, the screen shakes as if the passwords are incorrect. Any suggestions?
fungec wrote:
I can see these in my user groups, and I can change the passwords on both as often as I like. But when I then try to logon, the screen just shakes and nothing happens.
I don't do Windoze, so haven't been able to test migrating from a PC.
There have been a few similar posts here. Are you trying to log on to the new user account(s) via Fast User Switching? If so, apparently that doesn't work. You need to turn that off (via System Preferences > Users & Groups > Login Options. Remove the check from the Show fast user switching .... box.
Then log out of all accounts, restart, select the new account from the login screen and you should be prompted to set the password.
I'm not sure a screenshot will help (and to be honest I'm not sure how to do screenshots on the IMac - I've been a PC man for over a decade!).
In most places, Shift+Cmd+3 will print the entire screen; Shift+Cmd+4 will produce a "target" you can drag over a portion of the screen.
EDIT: by "most places" I mean after you're logged-on, and OSX knows your preferences about how & where to put the screenshot. So it won't work on the login screen itself.
Message was edited by: Pondini -
How can I set a password for my pictures on iPad Air ?
How can I set a password for my pictures on iPad Air ? if anyone have my iPad access mail or something I don't want anyone access my photos so how can I set it up.
You can't set a password for the Photos nor Mail apps, you can only set a passcode for your iPad as a whole (via Settings > Passcode).
There are third-party photo management apps such as Photo Manager Pro which you can copy your photos into from the Photos app (and then delete them from Photos), that app allows you (via its settings within the app) to set a password to access it.
For email you could access your email via a browser (and not have your password stored in the browser), or see if there are any email apps in your country's app store which have a password option -
Restrict the User name / Password Auto complete option for users accessing
Hi All,
Can any one know the Restrict the User name / Password Auto complete option for users accessing Portal from within and outside of Portal.
Regard's
RamaAre your referring to the browser functionality of remembering the usernames and passwords?
Thanks,
GLM -
MDT 2013: bootstrap.ini not applying username and password for share access
I customized my bootstrap.ini file to skip the welcome screen, set keyboard locale, and enter a service account username and password for share access. The welcome screen skip and keyboard locale work beautifully but it's not applying the share username/password/domain
at all.
bootstrap.ini:
[Settings]
Priority=Default
[Default]
DeployRoot=\\mydeploymentserver\DeploymentShare$
UserID=myuserid
UserDomain=mydomain.com
UserPassword=mypassword
KeyboardLocale=en-US
SkipBDDWelcome=YES
I verified that the unattend.xml file on the MININT volume during deployment had all of this information populated correctly:
<?xml version="1.0" encoding="utf-8"?>
<unattend xmlns="urn:schemas-microsoft-com:unattend">
<settings pass="windowsPE">
<component name="Microsoft-Windows-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
<ImageInstall>
<OSImage>
<WillShowUI>OnError</WillShowUI>
<InstallTo>
<DiskID>0</DiskID>
<PartitionID>2</PartitionID>
</InstallTo>
<InstallFrom>
<Path>\\mydeploymentserver\deploymentshare$\Operating Systems\Windows 7 x64 with District Software - 06222014\Windows 7 x64 with District Software - 06222014.wim</Path>
<MetaData>
<Key>/IMAGE/INDEX</Key>
<Value>1</Value>
</MetaData>
</InstallFrom>
</OSImage>
</ImageInstall>
<Display>
<ColorDepth>16</ColorDepth>
<HorizontalResolution>1024</HorizontalResolution>
<RefreshRate>60</RefreshRate>
<VerticalResolution>768</VerticalResolution>
</Display>
<ComplianceCheck>
<DisplayReport>OnError</DisplayReport>
</ComplianceCheck>
<UserData>
<AcceptEula>true</AcceptEula>
</UserData>
</component>
<component name="Microsoft-Windows-International-Core-WinPE" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<SetupUILanguage>
<UILanguage>en-US</UILanguage>
</SetupUILanguage>
<InputLocale>0409:00000409</InputLocale>
<SystemLocale>en-US</SystemLocale>
<UILanguage>en-US</UILanguage>
<UserLocale>en-US</UserLocale>
</component>
</settings>
<settings pass="generalize">
<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<DoNotCleanTaskBar>true</DoNotCleanTaskBar>
</component>
</settings>
<settings pass="specialize">
<component name="Microsoft-Windows-UnattendedJoin" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
<Identification>
<Credentials>
<Username>myusername</Username>
<Domain>mydomain.com</Domain>
<Password>mypassword</Password>
</Credentials>
<JoinDomain>mydomain.com</JoinDomain>
</Identification>
</component>
<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
<ComputerName>eos-vm-02</ComputerName>
<RegisteredOrganization>Regional School District 19</RegisteredOrganization>
<RegisteredOwner>Information Technology</RegisteredOwner>
<DoNotCleanTaskBar>true</DoNotCleanTaskBar>
<TimeZone>Eastern Standard Time</TimeZone>
</component>
<component name="Microsoft-Windows-IE-InternetExplorer" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<Home_Page>http://www.eosmith.org</Home_Page>
<DisableWelcomePage>true</DisableWelcomePage>
<DisableFirstRunWizard>false</DisableFirstRunWizard>
</component>
<component name="Microsoft-Windows-Deployment" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<RunSynchronous>
<RunSynchronousCommand wcm:action="add">
<Description>EnableAdmin</Description>
<Order>1</Order>
<Path>cmd /c net user Administrator /active:yes</Path>
</RunSynchronousCommand>
<RunSynchronousCommand wcm:action="add">
<Description>UnfilterAdministratorToken</Description>
<Order>2</Order>
<Path>cmd /c reg add HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System /v FilterAdministratorToken /t REG_DWORD /d 0 /f</Path>
</RunSynchronousCommand>
<RunSynchronousCommand wcm:action="add">
<Description>disable user account page</Description>
<Order>3</Order>
<Path>reg add HKLM\Software\Microsoft\Windows\CurrentVersion\Setup\OOBE /v UnattendCreatedUser /t REG_DWORD /d 1 /f</Path>
</RunSynchronousCommand>
</RunSynchronous>
</component>
<component name="Microsoft-Windows-International-Core" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<InputLocale>en-US</InputLocale>
<SystemLocale>en-US</SystemLocale>
<UILanguage>en-US</UILanguage>
<UserLocale>en-US</UserLocale>
</component>
<component name="Microsoft-Windows-TapiSetup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<TapiConfigured>0</TapiConfigured>
<TapiUnattendLocation>
<AreaCode>""</AreaCode>
<CountryOrRegion>1</CountryOrRegion>
<LongDistanceAccess>9</LongDistanceAccess>
<OutsideAccess>9</OutsideAccess>
<PulseOrToneDialing>1</PulseOrToneDialing>
<DisableCallWaiting>""</DisableCallWaiting>
<InternationalCarrierCode>""</InternationalCarrierCode>
<LongDistanceCarrierCode>""</LongDistanceCarrierCode>
<Name>Default</Name>
</TapiUnattendLocation>
</component>
<component name="Microsoft-Windows-SystemRestore-Main" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<DisableSR>1</DisableSR>
</component>
</settings>
<settings pass="oobeSystem">
<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
<UserAccounts>
<AdministratorPassword>
<Value>administratorpassword</Value>
<PlainText>true</PlainText>
</AdministratorPassword>
</UserAccounts>
<AutoLogon>
<Enabled>true</Enabled>
<Username>Administrator</Username>
<Domain>.</Domain>
<Password>
<Value>administratorpassword</Value>
<PlainText>true</PlainText>
</Password>
<LogonCount>999</LogonCount>
</AutoLogon>
<Display>
<ColorDepth>32</ColorDepth>
<HorizontalResolution>1024</HorizontalResolution>
<RefreshRate>60</RefreshRate>
<VerticalResolution>768</VerticalResolution>
</Display>
<FirstLogonCommands>
<SynchronousCommand wcm:action="add">
<CommandLine>wscript.exe %SystemDrive%\LTIBootstrap.vbs</CommandLine>
<Description>Lite Touch new OS</Description>
<Order>1</Order>
</SynchronousCommand>
</FirstLogonCommands>
<OOBE>
<HideEULAPage>true</HideEULAPage>
<NetworkLocation>Work</NetworkLocation>
<ProtectYourPC>1</ProtectYourPC>
</OOBE>
<RegisteredOrganization>Regional School District 19</RegisteredOrganization>
<RegisteredOwner>Information Technology</RegisteredOwner>
<TimeZone>Eastern Standard Time</TimeZone>
</component>
<component name="Microsoft-Windows-International-Core" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<InputLocale>en-US</InputLocale>
<SystemLocale>en-US</SystemLocale>
<UILanguage>en-US</UILanguage>
<UserLocale>en-US</UserLocale>
</component>
</settings>
<settings pass="offlineServicing">
<component name="Microsoft-Windows-PnpCustomizationsNonWinPE" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<DriverPaths>
<PathAndCredentials wcm:keyValue="1" wcm:action="add">
<Path>\Drivers</Path>
</PathAndCredentials>
</DriverPaths>
</component>
</settings>
</unattend>
... and the bdd.log file appeared not to read the username and password at all:
<![LOG[ZTIUtility!GetAllFixedDrives (False)]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[New ZTIDiskPartition : \\MININT-U1TGFAD\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #0" \\MININT-U1TGFAD\root\cimv2:Win32_LogicalDisk.DeviceID="C:"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[New ZTIDisk : \\MININT-U1TGFAD\root\cimv2:Win32_DiskDrive.DeviceID="\\\\.\\PHYSICALDRIVE0"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[New ZTIDiskPartition : \\MININT-U1TGFAD\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #1" \\MININT-U1TGFAD\root\cimv2:Win32_LogicalDisk.DeviceID="D:"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[New ZTIDisk : \\MININT-U1TGFAD\root\cimv2:Win32_DiskDrive.DeviceID="\\\\.\\PHYSICALDRIVE0"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[ZTIUtility!GetAllFixedDrives = C: D:]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Property LogPath is now = D:\MININT\SMSOSD\OSDLOGS]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Microsoft Deployment Toolkit version: 6.2.5019.0]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Property Debug is now = FALSE]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Cleaned up a dirty deployment.]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[ZTIUtility!GetAllFixedDrives (False)]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[New ZTIDiskPartition : \\MININT-U1TGFAD\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #0" \\MININT-U1TGFAD\root\cimv2:Win32_LogicalDisk.DeviceID="C:"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[New ZTIDisk : \\MININT-U1TGFAD\root\cimv2:Win32_DiskDrive.DeviceID="\\\\.\\PHYSICALDRIVE0"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[New ZTIDiskPartition : \\MININT-U1TGFAD\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #1" \\MININT-U1TGFAD\root\cimv2:Win32_LogicalDisk.DeviceID="D:"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[New ZTIDisk : \\MININT-U1TGFAD\root\cimv2:Win32_DiskDrive.DeviceID="\\\\.\\PHYSICALDRIVE0"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[ZTIUtility!GetAllFixedDrives = C: D:]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[No task sequence is in progress.]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[New ZTIDisk : \\MININT-U1TGFAD\root\cimv2:Win32_DiskDrive.DeviceID="\\\\.\\PHYSICALDRIVE0"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Found Possible OS TargetDisk: \\MININT-U1TGFAD\root\cimv2:Win32_DiskDrive.DeviceID="\\\\.\\PHYSICALDRIVE0"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[GetPartitions: 2]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Found Possible OS Target Partition: \\MININT-U1TGFAD\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #0"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[New ZTIDiskPartition : \\MININT-U1TGFAD\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #0" \\MININT-U1TGFAD\root\cimv2:Win32_LogicalDisk.DeviceID="C:"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Target Partition not big enough: \\MININT-U1TGFAD\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #0"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Found Possible OS Target Partition: \\MININT-U1TGFAD\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #1"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[New ZTIDiskPartition : \\MININT-U1TGFAD\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #1" \\MININT-U1TGFAD\root\cimv2:Win32_LogicalDisk.DeviceID="D:"]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Found Drive: D:]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Found FirstPossibleSystemDrive: D:]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Property SMSTSLocalDataDrive is now = D:]LOG]!><time="05:03:38.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Unable to connect to BCDStore.]LOG]!><time="05:03:43.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Not running within WinPE or WinRE.]LOG]!><time="05:03:43.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Property DeploymentMethod is now = UNC]LOG]!><time="05:03:44.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[DeploymentMethod = UNC]LOG]!><time="05:03:44.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Property DeployRoot is now = X:\Deploy]LOG]!><time="05:03:44.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Using a local or mapped drive, no connection is required.]LOG]!><time="05:03:44.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[DeployRoot = X:\Deploy]LOG]!><time="05:03:44.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Property DeployDrive is now = X:]LOG]!><time="05:03:44.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[DeployDrive = X:]LOG]!><time="05:03:44.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Property PHASE is now = PREINSTALL]LOG]!><time="05:03:44.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Property DeploymentType is now = NEWCOMPUTER]LOG]!><time="05:03:44.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Phase = PREINSTALL]LOG]!><time="05:03:44.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[About to run command: wscript.exe "X:\Deploy\Scripts\ZTIGather.wsf" /inifile:Bootstrap.ini]LOG]!><time="05:03:44.000+000" date="06-23-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Property inifile is now = Bootstrap.ini]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Microsoft Deployment Toolkit version: 6.2.5019.0]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[------------------------- Object Initialization -------------------------]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[------------------------- Initialization -------------------------]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Synchronizing the environments.]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property DeployRoot is now = X:\Deploy]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property DeployDrive is now = X:]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Finished synchronizing the environments.]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Getting OS info]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property OSCurrentVersion is now = 6.3.9600]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property OSCurrentBuild is now = 9600]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property OSVersion is now = WinPE]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property IsServerOS is now = False]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property IsServerCoreOS is now = False]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Finished getting OS info]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Getting HAL information]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property definition is now = BDD_Welcome_ENU.xml]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Microsoft Deployment Toolkit version: 6.2.5019.0]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property HALName is now = acpiapic]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Finished getting HAL information]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Getting network info]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Checking network adapter: [00000001] Intel(R) PRO/1000 MT Network Connection]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[MAC address = 00:50:56:85:38:B4]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[IP Address = 172.16.4.182]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[IP Address = fe80::c98:9fef:4305:51f0]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Default Gateway = 172.16.4.1]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property IPAddress001 is now = 172.16.4.182]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property IPAddress002 is now = fe80::c98:9fef:4305:51f0]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property MacAddress001 is now = 00:50:56:85:38:B4]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property DefaultGateway001 is now = 172.16.4.1]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Finished getting network info]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Getting DP info]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Unable to determine ConfigMgr distribution point]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Finished getting DP info]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Getting WDS server info]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Not Wizard = False]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property WizardComplete is now = N]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="Wizard" context="" type="1" thread="" file="Wizard">
<![LOG[Property WDSServer is now = mydeploymentserver.mydomain.com]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Finished getting WDS server info]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property HostName is now = MININT-U1TGFAD]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Getting asset info]LOG]!><time="05:03:45.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[FindFile: The file x86\Microsoft.BDD.Utility.dll could not be found in any standard locations.]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[FindFile(...\Microsoft.BDD.Utility.dll) Result : 1]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[RUN: regsvr32.exe /s ""]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[FindFile(...\Microsoft.BDD.Utility.dll) Result : 0]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[RUN: regsvr32.exe /s "X:\Deploy\Tools\x64\Microsoft.BDD.Utility.dll"]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property AssetTag is now = No Asset Tag]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property SerialNumber is now = VMware-42 05 2b f7 cd 5b 63 fd-83 8a 77 84 7c ed 79 05]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property Make is now = VMware, Inc.]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property Model is now = VMware Virtual Platform]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property Product is now = 440BX Desktop Reference Platform]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property UUID is now = F72B0542-5BCD-FD63-838A-77847CED7905]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property Memory is now = 2047]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property Architecture is now = X64]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property ProcessorSpeed is now = 2800]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property CapableArchitecture is now = AMD64 X64 X86]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property IsLaptop is now = False]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property IsDesktop is now = False]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property IsServer is now = False]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property IsUEFI is now = False]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property IsOnBattery is now = False]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property SupportsX86 is now = True]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property SupportsX64 is now = True]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property SupportsSLAT is now = False]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Finished getting asset info]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Getting OS SKU info]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Unable to determine Windows SKU while in Windows PE.]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Determining the Disk and Partition Number from the Logical Drive X:\WINDOWS]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property OriginalArchitecture is now = ]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property OriginalArchitecture is now = ]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property OriginalArchitecture is now = ]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Getting virtualization info]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property IsHypervisorRunning is now = True]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property SupportsVT is now = False]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property SupportsNX is now = True]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property Supports64Bit is now = True]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property SupportsHyperVRole is now = False]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property IsVM is now = True]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property VMPlatform is now = VMware]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Finished getting virtualization info]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Connection succeeded to MicrosoftVolumeEncryption]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[There are no encrypted drives]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property IsBDE is now = False]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Processing the PREINSTALL phase.]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Determining the INI file to use.]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Finished determining the INI file to use.]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Using from [Settings]: Rule Priority = DEFAULT]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[------ Processing the [DEFAULT] section ------]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Property DEPLOYROOT is now = \\mydeploymentserver\DeploymentShare$]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[Using from [DEFAULT]: DEPLOYROOT = \\mydeploymentserver\DeploymentShare$]LOG]!><time="05:03:47.000+000" date="06-23-2014" component="ZTIGather" context="" type="1" thread="" file="ZTIGather">
<![LOG[------ Done processing X:\Deploy\Scripts\Bootstrap.ini ------]LOG]!>Basics - Server 2008 R2 - SP1, WDS, MDT 2013
Well all, I've done this at least 20 times today and the deployment share info is still wrong...
Someone else built and messed with this thing so i'm trying to fix it. We have 2 MDT servers and 1 WDS that is on the Production MDT. I've turned the test MDT off.
It was working fine, until I updated the deployment share ... after adding some drivers for the surface pro 3 for the pxe boot
Very Simple bootstrap.ini
[Settings]
Priority=Default
[Default]
DeployRoot=\\MMPDEPLOY02\DeploymentShare$
UserID=xxx
UserDomain=xxx
UserPassword=xxx
KeyboardLocale=en-US
SkipBDDWelcome=YES
It continues to show up on the client as ||mdt901w8|deploymentshare$ (test server) (pipes for \ since it makes it a link and i'm new)
I've deleted all the .wim and associated files from all locations from the deployment share\boot folder and from the wds remote install\boot\x64\images folder where they are instead of the remote install\boot\images folder that everyone refers to.
I really can't figure this one out... I know it's something simple I'm over looking but I can't see it..
Any ideas.. -
For printer LaserJet Professional CM1410 any chance to set printing password for windows and MAC
Dear All
for printer LaserJet Professional CM1410 any chance to set printing password for windows and MAC?please help?What Windows OS are you using? Are you networked?
If you are networked, you have to setup your file and print sharing options in order to require password assess. If you are just trying to control specific files from being printed, you can do that, too.
If you are just trying to control the amount of printing off of a single PC with a printer, you could setup different accounts for each user and limit their access.
Some of the commercial printers can have password options, but I do not find any password options for the CM 1410, other than what I provided earlier.
If I have been helpful, a Kudo is always appreciated. -
HT5395 Is there a way to set a password for iMessage?
Is there a way to set a password for iMessage on computer instead of it logging in automatically? Other people use my computer and I do not want them to have access to my imessages.
ThanksHi,
It would be best if you set them up with their own Mac User account and changed your Login password.
You could use the Sign Out button each time you closed the app.
This would still show the Apple ID next time the app was started and if this is a common Apple ID they could Sign in again.
You could open Keychain Access and remove the Auth Token but this would also be recreated when they started Messages and re-signed in the iMessages account.
With the AIM, Jabber and Yahoo Accounts it is possible not to enter the password when creating the account and Unticking the "Save this Password to the Keychain" each time you sign those accounts in.
Much less possible with the iMessages account.
7:59 pm Wednesday; January 1, 2014
iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad -
Any way to save password for wiki access?
Is there any way to save the password for wiki access?
I don't want to require my users to put in a password for the wiki when they've already put one in for their user account.Safari and Firefox refuse to store the password in the keychain because we never actually submit the form. This is because we use JavaScript to digest the password before sending it up. That allows you to have a non-SSL site (and, correspondingly, not have to deal with certificates) but also not send passwords in clear-text and provide a Logout button (which standard HTTP and Kerberos authentication methods don't allow). In order for us to support storing passwords in the system keychain, we would have to either send passwords in the clear, remove the logout button, or require everyone to acquire and set up certificates for all of their sites.
Given these constraints, the best solution is a "remember me" checkbox which saves your session and keeps you logged in, and we're currently working on that. -
My younger sister executed my firefox just at this afternoon(she originally use IE), and she saw something that can't be seen. How can I set a password for firefox so that everyone have to enter the password before executing firefox?
Also see this for an English version of Profile Password:
*Profile Password: http://nic-nac-project.de/~kaosmos/profilepassword-en.html#PPF
It is an extension to protect the profile with a password, but being an extension that protection can easily be bypassed by starting Firefox in [[Safe mode]].<br />
So do not rely on it.<br />
If you want to protect content then you have to use methods supported by the OS like a separate user account with a password or an encrypted file system. -
I see that many people have already complained about Itunes' backup encryption. I NEVER set a password for it (and the corresponding option is still unticked, as always) yet it asked me for a pwd when I upgraded my 3GS to the 5.0 OS. How to solve this?
To prevent others from reading your mail, don't give them access to your account. If others need to use your computer for some reason, set up personal accounts, or a guest account, and switch to it before allowing them access. This is the simplest, and most effective, method.
Email message files can be read as plain text in TextEdit or any word processor.
To protect your email messages from being viewed by others while in your account, you would have to lock the folder, putting it into an encrypted disk image that required a password to be opened and mounted. You would have to double-click on the image and give your password to mount it before launching Mail then unmount it as soon as you're done. My guess is that you could replace the ~/Library/Mail folder with an alias pointing to the folder on the disk image.
It may work, but it seems like a lot of unnecessary hassle. -
My Mac has stopped playing you tube asking me to update flash player trouble is it is asking me for a password and I don't ever recall setting a password for this mac …!!!!
When the Mac was setup you had to create an administrative password.and account. Yo have to sign into that account to install apps/plug-ins like Flash. To reset that password.
Forgot Mac Password? How to Reset Your Mac Password (with or without CD)
Change the Admin Password with Mac OS X Single User Mode
Reset mac mini admin password: Apple Support Communities -
Username and password for Sun Access Manager 7.1
Hi
Thank you for reading my post
I ge the new Java Application Platform SDK Update 2 which has access manager and portlet management inside it.
Can you tell me what is username and password for Sun access Manager 7.1 administration cosole?
thankswith me it was amadmin : admin123
in the readme file in the addons directory:
Done! Access the AM server URL and see if the Access Manager is working or not -
<amserver_protocol>://<amserver_host>:<amserver_port>/amserver
user : 'amadmin', password : <admin password>
in a config file i found the password was admin123 -
Set multiple passwords for single PDF
Hi All,
Do it is possible to set multiple passwords for single PDF i.e) a single PDF can be accessed using predefined passwords. It would be great if any one could can help me .
Thanks
AugustineThank you.
Do you mean different IDs can be used for a single PDF and can make the PDF protected.
Regards
Augustine -
RemoteExceptionError:Wrong Password for user
Hi All,
I have installed Oracle 10g on Windows XP. I created a database called orcl1 using DBCA and set the sys and system user passwords as "oracle". My windows xp operating system password is set as username:Bobby and password :welcome4all.
Yet at the startup/shutdown page in Enterprise Manager, when I enter HOST CREDENTIALS as username:Bobby,password :welcome4all
and credentials for target database as username:sys,password :oracle, I get RemoteOperationException:ERROR: WRONG PASSWORD FOR USER .
I don't understand why? Am I doing something wrong?
Please Help!
ThanksSee this thread:
Operating system user for Host cridentials -
My computer continually asks me to enter my password for Keychain access. This problem is continuos and I am having trouble with eliminating it.
I have changed my password through Security and my Accounts numerous times to no avail.
Is there anything I can do other than Resetting the entire computer and re installing all of the software, apps, etc.etc.Back up all data before proceeding.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
Right-click or control-click the login entry in the list. From the menu that pops up, select
Change Settings for Keychain "login"
In the sheet that opens, uncheck both boxes, if not already unchecked.
From the menu bar, select
Keychain Access ▹ Preferences... ▹ First Aid
There are four checkboxes in the window that opens. Check all of them. if they're not already checked. Close the window.
Select
Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain. Quit Keychain Access.
If you use iCloud Keychain, open the iCloud preference pane and uncheck the Keychain box. You'll be prompted to delete the local iCloud keychain. Confirm. Then re-check the box. Follow one of the procedures described in this support article to set up iCloud Keychain on an additional device.
Maybe you are looking for
-
Issue with Payroll posting in FI
Hello Friends, our company run a simulation run on payroll for the month of Jan 2008. things are perfect.. but after actual the posting of payroll, the posting is not correct. for example.. simulation run shows the total payroll
-
Numbers won't open a Numbers doc downloaded from iCloud
I just downloaded a Numbers document I created on my iPad2. When I try to open it, Numbers does one of two things: 1) It displays the opening progress bar but then doesn't open a window (even though the file is shown in the Windows menu). The minimis
-
Not possible to add a new call in agenda with N97 ...
I can not add a new call in the agenda, I dont understand if is a limit of N97 mini. It's a strange situation because with all my previous Nokia phone that was possible. It's a very usefull function because I can start the call directly with alert st
-
I think I've encountered a bug in Oracle 9.2.0.1.0. If I create table with its name in quotes, I can't access it again unless I also use the name in quotes. But, in DBA_OBJECTS the table's name shows up without quotes. For example: CREATE TABLE "aval
-
Hope this is in the right place...
...and apologies if it isn't i am hoping to upgrade my 6680 to N93 and junk my iPaq so that i have all my information in one place - but before i do i have one question... does the PIM function - notably the calendar and 'to do' - carry more informat