Setting a retimed "Hold" section back to "Normal" Doesn't Work

After using the "Retime" functionality to "Hold" a clip I then decided against it, but I can't get rid of it.
Using the shortcut "Shift-N" or choosing "Normal" from the Retime menu, which normally works, fails.
It fails by doing a little flicking animation with one of the nearby clips and then just refusing to do anything.
As shown in this clip - http://youtu.be/9jN3yoBejFI
Can I assume this is a bug or is FCPX trying to tell me something?
Notice the lower clip (main timeline) is showing no thumbnails (and instead strange empty space).
I have no idea why, I've restarted, it just refuses to show - as I see it, this is another bug

Thanks, I tried that by chance after posting and it fixes everything - including the lower clip not showing thumbnails.

Similar Messages

I am locked out of my account because my password includes "[" and my computer is set to spanish. In spanish that key doesn't work. How do I gejt back into my computer?

i am locked out of my account because my password includes "[" and my computer is set to spanish. In spanish that key doesn't work. How do I gejt back into my computer?

If the user account is associated with an Apple ID, and you know the Apple ID password, then maybe the Apple ID can be used to reset your user account password.
Otherwise*, boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window opens.
Select your boot volume if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Follow the prompts to reset the password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
Select
 ▹ Restart
from the menu bar.
You should now be able to log in with the new password, but your Keychain will be reset (empty.) If you've forgotten the Keychain password (which is ordinarily the same as your login password), there's no way to recover it.
*Note: If you've activated FileVault, this procedure doesn't apply. Follow instead the instructions on this page:
If you forget the password and FileVault is on

I imported videos from photo into iMovie when I set up iMovie (obvious mistake) and now iMovie doesn't work properly, nor can I move specific videos into a folder where I want them. How do I fix this?

I imported videos from photo into iMovie when I set up iMovie (obvious mistake) and now iMovie doesn't work properly, nor can I move specific videos into a folder where I want them. How do I fix this? I even tried deleting iMovie, bought a new copy and installed it, but the folder "iPhoto Videos" is still there and I can't get new clips loaded to iMovie, especially where I want them. Please help.

The iPhoto Videos do occasionally have problems. I've seen a lot of people write messages to this Discussion group describing similar problems. The only thing that seems to get around this problem is to pull the video clips out of iPhoto then import them directly into iMovie. Once the troubles with iPhoto Videos starts, I haven't yet seen anyone write back with something that they did to fix it.
The most difficult part of doing this is the movies in iPhoto might be a little difficult to track down. But you can create a smart alum that does that for you. Go to iPhoto > File Menu > New Smart Album:
Set the first pulldown menu to keyword, second to contains, then in the last box type Movie with a capital 'M'. Then click OK. This smart album more or less does as search of the whole iPhoto Library and only displays items that match your search tearm of "Movie" exactly. In that smart album then you can find the original Movies you want to move out of iPhoto and into iMovie, <CTRL> click on the Movie clip, then choose Reveal in Finder. That will jump you out of iPhoto temporarily and into the iPhoto Library folder. From there you can move that movie file to the desktop. Move all the clips you want, once they're all collected up go to iMovie and go to the File Menu > Import Files. Then point it to the desktop where you moved your video clips.
This will put all those videos into an Event folder in iMovie and bypass iPhoto Videos altogether.

My new iPad air is suddenly asking for a pass code. I have only just finished restoring it from my iPad 2 and I didn't set one. The one I used before doesn't work. What can I do?

My new iPad air is asking for a pass code. I have only just finished restoring it via iTunes from my ipad2 and I didn't set one. The one I used before doesn't work. What can I do?

http://support.apple.com/kb/HT1212

Why setting the download folder ton an external HDD doesn't work? the downloaded files goes to My Documents (Windows)?

Why setting the download folder ton an external HDD doesn't work? the downloaded files goes to My Documents (Windows)?

I did what you said and updated FF, now the download goes to the external HDD that I specified, but now FF bugs, it freezes (not responing) :s
I reinstalled it but it doesn't fix the problem. I don't know what to do :(

I turned my ipod off, and it won't turn back on. charging doesn't work and it won't be recognised by wi-fi or usb connections. How do i fix it?

i turned my ipod off, and it won't turn back on. charging doesn't work and it won't be recognised by wi-fi or usb connections. how do i fix it?

Check your cable whether it is good. If it is use the wall plug to charge at least half an hour. See how it goes.

Hey, when i deblockaded my ipod nano 5thgen, all the songs and vids' dissapeared but my memory is still filled as 'others'... How do i get my music back? (restoring doesn't work cuz the songs were from a laptop, but it crashed...) thx!!

Hey everyone, when my ipod( nano, 5th generation) was stucked, i deblockaded it, but then all the music and video's dissapeared.... And when i check thee info it says '6.4 GB others' and '567 MB free.... And don't know how this could happen but i really want all my music back!! And i cant put all the songs back because the laptop i used for this ipod crashed and it's still in the store to ffix it... So now i have a lapop that i borowod from the store but i only have 100 songs on that laptop ( manual mode, so i can put them on the ipod but i cant tpuch the others) and that means i would download 1200 songs, and that really takes a long time... And my memory is full, so i can't put new songs on it.... S, the question: is there a way i can get all my songs back?? And if that is impossible, how do i clear my memory, so it's free for new songs??
Already thanx a lot!!
mmuuuuaahh,
Charlaih

Well, shut my mouth! There was a similar question over to the right about a 6th generation nano repeating over and over again -- I read the answer to that one, followed the instructions, and holy crap, it's back to normal.
Is there a name for this when you end up replying to your own aggravating question? That's what I did. Now I can go out and listen. It's only 91 degrees. Heaven. Thanks, Apple.

Back facing camera doesn't work!

My back facing camera on my ipad2 doesn't work. The shutter will not open to take pics or video. I have tried rebooting iPad and resetting it and nothing works! I was hoping for an at home fix instead of sending it in cause I'm afraid to lose some photos I put on ipad2 from my computer cause I recently lost my hard drive! I can't back those ones up with i cloud or iTunes ( I don't think so anyways). Thanks, any suggestions would be greatly appreciated!

Dian-
You should take care of the photos first, before you worry about the camera. Once you get your computer repaired (or get a new one) you need to get it authorized for your Apple ID, and find a way to back up the iPad without erasing it.
Search for an Apple Authorized Repair Center near you. They should be able to advise you on how to save your photos. (I see that there is Capitol Macintosh in Lansing, MI.)
Fred

Setting Chart type property of iSPC chart dynamically doesn't work

Hi all,
I am trying to set the chart type property (XBAR, MEDIAN etc..) of iSPC chart dynamically from my html page.
This is the code that I used.
var chart_obj = document.iSPCChart.getChartObject();
chart_obj.setChartType("MEDIAN");
iSPCChart is my Applet name.
But the code doesn't seem to work.
The chart is always of the type that I have set in the iSPC display template.
Can someone help me in this regard?
Thanks a lot.
Regards,
M.Subathra

M,
Even though that method shows up in the script assistant and the docs it really doesn't work.
Just swap out the display template for one saved with the desired type:
document.iSPCChart.setDisplayTemplate("Folder/MedianChart");
document.iSPCChart.updateChart(true);
With all of the alarm rules, colors, limits, settings, etc. it is not likely that you will have the same view (display template) that applies to every SPC chart type.
There is also a predelivered example of an SPC Chart that uses an iframe and an irpt to dynamically pass the chart type (along with other settings) you can reference: http://<servername>/Lighthammer/Samples/SPC/Servers.irpt
Regards,
Jeremy Good

How to turn on iphone4 when holding home wake/sleep button doesn't work?

hi
There is no apple logo on the screen when i holding home and wake/sleep button for more than 15 seconds. I am trying to connect the phone to my laptop, however, there is no reaction on iphone or on laptop.
Can anyone help me with that?
Thank you

Sometimes the reset can take 20 seconds or longer. How long have you held it? I would just hold it until you see the logo. Is the battery charged? If the battery has had a chance to discharge, you will have to plug the phone in to charge. If it gets to a point, it may turn on by itself. I would use the main charger for this. Also, if this method doesn't work, and it is not being recognized by the computer you may need to make an appointment with the Genius Bar as there could be a hardware defect causing this problem.

Flashing question mark on start up -Pram reset worked now it's back and pram doesn't work

So the other half has crashed my mid 2012 macbook pro twice in two days (watching youtube). First time I managed to get passed the flashing question mark folder icon using pram reset now this doesn't work and it just goes to that icon. Hard drive is missing in. utility so can't whipe that either
any suggestions on what has failed, it's only 1.5 years old so I'm really disappointed

A flashing question mark or globe appears when you start your Mac
Question (?) Mark, Blinking Folder, or Gray Screen at Startup
These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
A flashing question mark appears when you start your Mac
Mac OS X- Gray screen appears during startup
In most cases the problems may be caused by one or more of these:
a. Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
b. Boot drive's directory has been corrupted - Repair with Disk Utility.
c. Critical system files are damaged or deleted - Reinstall OS X.
d. The disk drive is physically non-functional - Replace the hard drive.
Note that the information I have provided is what Apple recommends, If other users suggest different solutions than found here, then be sure what they recommend does not impact on your warranty, if any, or ability to get continuing Apple service.
Please don't start removing drives or changing cables unless you know what you are doing and have exhausted other non-invasive alternatives outlined here. If you perform any work yourself that is unapproved by Apple, then you will void any warranty you may have and lose all further Apple Support.
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD. Simply boot from the Recovery HD to perform the above.
Reinstall Snow Leopard Without Erasing The drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing The Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

How do I set the dates on iMessage back to "normal"?

So, I have iOS 6 and I tried to activate PassBook by doing that trick where you set your date ahead by a year or so. It didn't work for me, but anyway, I set mine ahead and texted someone (a mistake on my part, clearly!!!) — the dates won't show up because my phone is confused and thinks everything has gone awry in the time-space continuum. I'm guessing that the dates and times of my texts to and from this contact won't show until the mysterioso date in the future (March 20, 2013, by the way). But, is there a way that I can see the date- and time-stamps on the texts again? Is there anything I can do?
Thanks to anyone who answers!

I had this problem too.
I deleted the text I had sent when my date/time was in the future and the timestamps for the rest of my messages appeared straight away.
Hope this works for you too!

"go back" on toolbar doesn't work

The "go back" icon on my toolbar had disappeared. So I went to view and added the icon. I can see it but it is shaded and won't work. In order to view the last item I was reading, I have to go to history and choose from there which is annoying. I need to know how to activate this feature.
Thanks for your help.

Click "View" menu in the Safari menu bar and then "Customize Toolbar"
Drag the default set into the toolbar.
Click "Done"
Hope this works.
Best.

"Go Back One Page" doesn't work on first page visited from Home Page

When opening FF4.0, my homepage opens fine. Whether I manually type a webpage address, use a book mark from list or button bar, once that page opens, the "Go Back One Page" button is still gray and the only way to get back home is to click the "Home" button.
I tried restarting program and it did not correct anything. I next tried restarting computer and that did not do anything either.
My system: Core2Quad Q8400 with 8G RAM. BIOS is up to date, as well as all drivers for all hardware.

Hi,
Thanks for your reply, but unfortunately browser cache wasn't the problem. I use Firefox(default), IE and Opera for testing and I close the browser most of the times after I deploy the project. Even tough if I don't close the browser I hit the ctrl+f5 several times to avoid the cache problems. I tryed setting the browser to check newer versions every time I open the page, but that didn't help either.
Like I said the problem occurs in our public deployment server too with everybody who enters the page first time in each session. After login they get the pages with stylesheet within and if they logout they will be redirected to same login page and the stylesheet is loaded correctly. Then if they restart the browser and try to login the application again, they will be faced the same problem.
Is there anything else I can try?

Back navigation arrow doesn't work anymore, also not getting suggestoins when I start typing a URL... how can these be fixed?

So after I deleted a bunch of files/applications today (computer was threatening to crash), Firefox started to do a couple weird things. Navigating backward is no longer possible; the back navigation arrow is greyed out. Also, when I start typing a URL, it no longer suggests the rest of it, either in the URL bar itself or in a drop down menu (it used to do both). 16.0.2 is the current version, right? That's the one I kept, I deleted the others. Recently, I got the announcement that Apple isn't supporting my operating system, Mac OS X 10.5.8 anymore, I don't know if that is relevant. How can these things be fixed?

I use Windows but I can suggest you a couple of things that you can try out.
1. Right click on your toolbar, click Customize. Click on the "'''Restore Default Set'''" button.
2. Go to Firefox menu > Help menu > Troubleshooting information. In the tab that opens afterwards click "'''Reset Firefox'''".

Setting a retimed "Hold" section back to "Normal" Doesn't Work

Similar Messages

Maybe you are looking for