Setting a TV show as seen

I can see how to set my music as being played and my podcast as being played, but I can't see how to set the TV shows as being played. this has become a problem because I recently had to rebuild my hard disk and thus reimport all the music. When I did that, everything came back in as unplayed. I need to find a way to mark all the shows that I have seen as played so that my iPod does not load everyone of the shows.
thanks,

control click is the same as a right click.
Or go to System prefs -> Keyboard and Mouse -> Trackpad and enable *Tap trackpad using two fingers for secondary click*.

Similar Messages

Help! I thought I was pretty good setting up slide shows and adding music. I'm trying to make a new slide show from a great trip to New York. I can get theme music but no music at all from iTunes. Checking my older slide shows, which did play music!

Help! I thought I was pretty good setting up slide shows and adding music. I'm trying to make a new slide show from a great trip to New York. I can get theme music but no music at all from iTunes. Checking my older slide shows, which did play music, it's all gone!
Problem seems to have started after updating to Mavericks.
Is there a box I need to check/uncheck?
Any help very welcome!

Hopefully you've seen the post from Terence Devlin? I've pasted it below.
In iTunes go File -> Library -> Organise Library -> Reorganise Library.
Then quit and restart iPhoto.
Pity Apple didn't either warn us or set up a bug fix!

I have just set up my Apple TV, how do I set it to show my screen on my TV

I have just set up my Apple TV, how do I set it to show my screen on my TV

Welcome to the Apple Community.
AirPlay Mirroring requires a second-generation Apple TV or later, OS X 10.8 or better and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer).

Can Aperture not be set up to show a "Last Import" smart folder?

I'm trying to make the transfer from using iPhoto to using Aperture.
One thing I found really great in iPhoto was the smart folder that was simply set to show the last import, no matter when that import was done - whether it was today, yesterday or 6 months ago.
The reason I found this so handy was because I set my iPad up in iTunes to only sync the photos from that Last Import smart folder, rather than all my photos.
That way, every time I synced my iPad, I always had my most recent photos on my iPad, no matter when the pictures were taken.
Now with Aperture, I cannot see a way to create anything similar. The best I can do is to create a smart folder with photos imported within the last month, let's say.
But the problem with that is that if I haven't imported any new photos for over a month, then the next time I sync my iPad, then all my photos will no longer be on the iPad.
If I create a longer timeframe, to let's say 3 months, then I might end up with way too many photos trying to sync across, and that's something I don't want. I could end up with hundreds and hundreds of photos, and I don't have the free space to be able to do this!
When I used "Last Import" with iPhoto, then I always only had around 50 or 60 photos, because that's just generally how many I usually imported at any one time. Sometimes it was more, sometimes less, but the average worked for me.
So to sum up: Can Aperture not be set up to show a "Last Import" smart folder, regardless of date?
Or alternatively, is there any way I could "hack" or "trick" Aperture into doing something like this so that I always have a managable amount of the most recent photos on my iPad?

Hello Brett,
that does not seem to be an easy probem as you discovered.
Some Workarounds:
You might to use a smart album rule "Import session is" instead of a date range, but that will not be automatic.
Create a folder "recently added" and keep your recent projects inside that folder; create a smart album at the top level of that folder; move older projects somewhere else.
Or enable the Photo Stream - that is the current replacement for the "most recently added" album; it will (is supposed to) always show the most recent 1000 images.
If you are familiar with AppleScript, you can make Aperture run an AppleScript on import (Import Settings) to add your imported image to an album of new images. From time to time remove the older images.
Sorry, but no really convenient way to do it..
Regards
Léonie

I created a website with iWeb but use GoDady for hosting it rather than MobileMe. The images on my Gallery page do not show at all on the external domain but they DO show when seen on MobileMe. Has anyone encountered this problem before? Many thanks!

Hello al!
I created a website with iWeb but use GoDady for hosting it rather than MobileMe. The images on my Gallery page do not show at all on the external domain but they DO show when seen on MobileMe. Has anyone encountered this problem before? Many thanks!

Just create a new page (or use the existing photo page) on your external site and use html to add an iframe sized to the page and link it to the mobilme gallery page. Works for me just fine when showing my gallery from a yahoo site.
like this
<iframe scrolling="off" allowTransparency="true" frameborder="0" scrolling="yes" style="width:100%;height:100%;border:none" src="http://gallery.me.com/your_account_name"></iframe>

I just purchased a Thunderbolt Display for use with Photoshop work. How can I set up to show/work in separate programs on each screen?

I just purchased a Thunderbolt Display as an additional screen for Photoshop work. Following set up instructions appears to allow only mirroring of the screens. How can I set up to show/work in separate programs on each screen?

Yes, each blue rectangle is a screen. You can create different geometries, to suit your needs. For example, you can even make this kind of thing... :
Or this:
I don't know why you would want to do that, but you can!

How to Set JFilechooser to show file with the same extension in the filetyp

How to Set JFilechooser to show file with the same extension in the filetypes??
help

I also don't understand, but if you mean how to display only files with a certain extension in your JFileChooser then you should have a look at the JFileChooser API:
http://java.sun.com/j2se/1.5.0/docs/api/javax/swing/JFileChooser.html
The introduction shows an example of how to do that.

My apps are suddenly stop working periovously it was working very well but one day it stop i have run sfc/scannow to even try to to systen restore but there is no restore point & even i try to restore to factory setting but it showing some file are miss

my apps are suddenly stop working periovously it was working very well but one day it stop i have run sfc/scannow to even try to to systen restore but there is no restore point & even i try to restore to factory setting but it showing some file are
missing even I update it to windows 8.1 update 1 but still same thing not even single app is working
in sfc/s014-04-13 13:14:03, Info                  CSI    000004cf [SR] Beginning Verify and Repair transaction
2014-04-13 13:14:12, Info                  CSI    000004d1 [SR] Cannot repair member file [l:36{18}]"Amd64\CNBJ2530.DPB" of prncacla.inf, Version =
6.3.9600.16384, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24{12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-04-13 13:14:19, Info                  CSI    000004d3 [SR] Cannot repair member file [l:36{18}]"Amd64\CNBJ2530.DPB" of prncacla.inf, Version =
6.3.9600.16384, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24{12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-04-13 13:14:19, Info                  CSI    000004d4 [SR] This component was referenced by [l:186{93}]"Microsoft-Windows-Printer-Drivers-Package~31bf3856ad364e35~amd64~~6.3.9600.16384.INF_prncacla"
2014-04-13 13:14:27, Info                  CSI    000004d5 [SR] Verify completcannow detail I get this result

and this the dism report
DISM report and It is showing that cammand cannot perform because of i/o devices error
2014-04-14 00:54:14, Info DISM PID=1208 TID=2820 Temporarily setting the scratch directory. This may be overridden by user later. - CDISMManager::FinalConstruct
2014-04-14 00:54:14, Info DISM PID=1208 TID=2820 Scratch directory set to 'C:\Users\R0027~1.JSA\AppData\Local\Temp\'. - CDISMManager::put_ScratchDir
2014-04-14 00:54:14, Info DISM PID=1208 TID=2820 DismCore.dll version: 6.3.9600.16384 - CDISMManager::FinalConstruct
2014-04-14 00:54:14, Info DISM PID=1208 TID=2820 Scratch directory set to 'C:\$SysReset\Temp'. - CDISMManager::put_ScratchDir
2014-04-14 00:56:26, Info DISM PID=6888 TID=6828 Temporarily setting the scratch directory. This may be overridden by user later. - CDISMManager::FinalConstruct
2014-04-14 00:56:26, Info DISM PID=6888 TID=6828 Scratch directory set to 'C:\Users\R0027~1.JSA\AppData\Local\Temp\'. - CDISMManager::put_ScratchDir
2014-04-14 00:56:26, Info DISM PID=6888 TID=6828 DismCore.dll version: 6.3.9600.16384 - CDISMManager::FinalConstruct
2014-04-14 00:56:26, Info DISM PID=6888 TID=6828 Scratch directory set to 'C:\$SysReset\Temp'. - CDISMManager::put_ScratchDir
2014-04-14 02:41:53, Info DISM PID=1068 TID=4108 Temporarily setting the scratch directory. This may be overridden by user later. - CDISMManager::FinalConstruct
2014-04-14 02:41:53, Info DISM PID=1068 TID=4108 Scratch directory set to 'C:\Users\R0027~1.JSA\AppData\Local\Temp\'. - CDISMManager::put_ScratchDir
2014-04-14 02:41:53, Info DISM PID=1068 TID=4108 DismCore.dll version: 6.3.9600.17031 - CDISMManager::FinalConstruct
2014-04-14 02:41:53, Info DISM PID=1068 TID=4108 Scratch directory set to 'C:\$SysReset\Temp'. - CDISMManager::put_ScratchDir

HT4623 After update of my iphone 3GS ios, I found out that my iphone has returned back to factory setting. It shows on the screen that I need to sett up my iphone so as to start using. I followed the on screen display but the step keeps failing

Dear Community,
Please can someone assist me on what to do on the following;
After update of my iphone 3GS ios. I found out that my iphone has returned back to factory setting and it shows No Service on the top left corner of my iphone screen. It equally shows on the screen that I have to set up the iphone before using it again. I followed the on screen display then get connected to a WiFi, but the response I was getting is that the Set up Server cannot be contacted please try again latter. I chose the option of using itune through my Laptop. The response I was getting here is that my iphone cannot be connected the itune store because my iphone was not found.
I am regretting why I updated the ios. Please, can someone advise me on what to do please.
I am ernestly waiting for your kind response.
Regards
Daniel

Hi iPheariPhoPad,
Welcome to Apple Support Communities.
It sounds like there’s an issue with Settings, the Notes app entry isn’t showing up as expected. Take a look at the article linked below and try restarting your iPhone 3GS.
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
If that doesn’t do it, try restoring your iPhone as shown in this article:
Use iTunes to restore your iOS device to factory settings - Apple Support
Take care,
-Jason

How to set preference to "show all" open windows in all open applications (until I quit)

how do I set preferences to "show all" windows in all open applications (until I quit the application) ?

Can you explain more what the problem is and what you want to see.
All windows are shown by default, unless you minimize them, so I'm confused at what you are asking.

How to set Photoshop to show actual print size?

When I go to View Print Size the resultant image is smaller than the actual print size. How do I set PS to show the actual size on my monitor?

Measure the physical horizontal viewing length of your monitor. 11.25 inches for example.
Then the horizontal resolution your monitor is set to. 1280 pixels as an example. divide 1280 by 11.25 to get 113.77 pixels per inch, your screen resolution. Round it out to 114.
In Photoshop: Edit menu > Preferences > Units and Rulers, and in New Document Presets, change the Screen Resolution to 114. Click OK, restart Photoshop.
After that when you use View > Print Size, your onscreen rulers will match up to a physical ruler and your documents will be at the physical print size set in your document's dimensions under Image > Image Size.
Gene

HT3771 set up for printing with HP Designjet 500ps (Using Mac os 10.4.11 Printer is set up correctly showing on Mac-Updates installed but still won't print-Printer shows TIME OUT)

Set up for HP Designjet 500ps using Mac os x 10.4.11 Does any one know where to upload
Leopard os x 10.5 The printer will not print until I have the updated software. Ebay sell the
disc on their auction site, but only on disc not a download which is more convenient & faster
to get in a hurry.The software installed in the mac is working the way it should & showing up
as it would but it seems as though there is a driver that's needed. The results in any articals
that I have read suggest you don't need any drivers if you use HP EasyPhotoSoftware installed.

Welcome to Apple Support Communities. We're users here, not "Apple Inc."
You might have better a response to your questions by posting them in the OS X 10.4 Tiger forums: https://discussions.apple.com/community/mac_os/mac_os_x_v10.4_tiger
or in the PowerMac forums:
https://discussions.apple.com/community/desktop_computers/power_macof
This forum is for OS X 10.6 Snow Leopard. Since that version won't run on your PowerMac, you're not likely to get many helpful responses here.
In any case, I'll try to offer some basic troubleshooting suggestions:
The PS designation on your printer denotes the PostScript printer language. Is your applications software and current printer driver configured to send PostScript (or HP-GL or HP-PCL or ???)
Does ANY application print anything (even gibberish) to the printer?
HP still shows a DesignJet 500 series raster driver for OS X 10.4 Tiger available to download here:
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/? sp4ts.oid=377952&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Di dx%253D%257CswItem%253Dpl_97046_1%257CswEnvOID%253D2072%257CitemLocale%253D%257C swLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTo k=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken
Does the printer time-out with every program, or just one? Have you tried another cable?
OS X 10.5 Leopard is no longer sold by Apple. It was never sold as a download, sold only on CD/DVD disc. Discs might still be available for purchase on eBay.
OS X 10.6 "Snow Leopard" is the oldest version of OS X still sold by Apple, and it too is available ONLY on CD/DVD for $20, but it will not run on your PowerMac, because Snow Leopard requires an Intel processor: os x snow leopard requirements
HP DesignJet 500 basic printer documentation is available as a pdf document and downloadable file here: http://h20566.www2.hp.com/portal/site/hpsc/public/psi/manualsResults?sp4ts.oid=2 5301&ac.admitted=1391720518005.876444892.199480143
How is the printer connected to the computer? Are you using a USB interface, a Centronics 'Parallel' interface, or a JetDirect network interface?
It appears that the network timeout default for the printer was 30 minutes, but it can apparently be set in the range of anything 30-seconds and longer. The manual notes that some software does not send an 'end of job' postscript marker, so that is the reason for the time-out setting.
http://h20566.www2.hp.com/portal/site/hpsc/template.BINARYPORTLET/public/kb/docD isplay/resource.process/?spf_p.tpst=kbDocDisplay_ws_BI&spf_p.rid_kbDocDisplay=do cDisplayResURL&javax.portlet.begCacheTok=com.vignette.cachetoken&spf_p.rst_kbDoc Display=wsrp-resourceState%3DdocId%253Demr_na-c00749274-1%257CdocLocale%253Den_U S&javax.portlet.endCacheTok=com.vignette.cachetoken

Why isn't ratings information set in lightroom showing up in windows explorer file properties?

I am using Lightroom 3.4 64 bit on Windows7 64 bit. When I apply keywords and set a rating in lightroom, only the keywords show up in the file properties in windows explorer, and FastStone viewer. The ratings information is not shown. Is this a known problem, or is there a way to fix it?

I am using Lightroom 3.4 64 bit on Windows7 64 bit. When I apply keywords and set a rating in lightroom, only the keywords show up in the file properties in windows explorer, and FastStone viewer. The ratings information is not shown.
Hmm, are you remembering to do Metadata > Save Metadata To File after you change the rating in LR?
LR and Windows 7, Vista, and even XP (if you install Windows Live Photo Gallery) share metadata using industry-standard fields, and Windows' manipulation of the metadata is pretty robust. In particular, they'll share the rating via the metadata field XMP:Rating. I just verified this with LR 3.4 and Windows 7, but I'm pretty sure it also applies to earlier versions of LR 3:
1. In LR 3.4, change the rating of an image.
2. Metadata > Save Metadata To File
3. In Windows Explorer, right-click the image file and select Properties.
4. Observe the new rating on the Details tab.
5. Change the rating on the Details tab.
6. In LR, do Metadata > Read Metadata From File. Observe the new rating in LR.

Can we set the Option "Show add-in user interface errors" with VBA?

Does anyone know if the advanced Option "Show add-in user interface errors" can be set with VBA in Project Pro 2013?
\Spiro Theopoulos, Montreal, QC (Canada)

Spiro,
Sorry but as far as I know that option is not available through VBA.
John

User Property Sets / UUP -- not showing up

Hi. We are having problems getting any portal user property sets to show up in any environment other than our dev boxes. We are running 10.2. Our environment consists of our dev workstations, a dev server in 'development' mode, a stage server in 'production' mode, and a production server in 'production' mode.
On our development boxes, we see the following property sets from the portal admin:
Groupspace
CustomerProperties
BusinessUserProperties
BusinessEmployeeProperties
The latter 2 are our UUP property sets. As I said, these sets appear on our dev boxes, but from what I understand, that is expected because the EAR is exploded when published on a dev box.
Consultants developed much of this portal application for us, including the uup property sets, and they are backing away and not offering any help in this matter. They simply said to use the propegation tools. I used the propegation tool to merge my dev box inventory and our development server inventory, and the differences did indicate the 4 property sets listed above. I selected to add only those 4 property sets to the dev server, exported the merged inventory, and exported it to our dev server with no errors. However, still no property sets showed up. I then pulled down another inventory from our dev server, and it indicated that it still did not have the property sets. I repeated this cycle once more to no avail.
Things that are confusing to me are:
1) The 'Groupspace' and 'CustomerProperties' sets appear to be portal default property sets. Wouldn't they be expected to exist in all environments?
2) I thought that I read if the server you are deploying the EAR to is in 'development' mode, then the property sets should be moved over when deploying the EAR normally. I may be wrong about this as I am on information overload trying to learn these portal aspects under a time crunch.
3) Where in the portal database are the propertysets themselved defined? I can see the 'PROPERTY_KEY' and 'PROPERTY_VALUE' tables which handle storing the user properties themselves, but I don't see any tables which would define a property set.
Thanks in advance for any insights to this issue. It is making my week really tough.

1st, I recommend posting in the WebLogic Portal forum:
WebLogic Portal
2ndly, I recommend opening a support case to get assistance if you are under a time crunch.

Setting a TV show as seen

Similar Messages

Maybe you are looking for