Setting Active Executable to 2.1

No matter how many times I set the Active Executable to 2.1, it goes back to 2.0 whenever I build an iPhone project in XCode. This is a newly created project from the latest XCode 3.1 / iPhoneOS 2.1. Is this a known bug or am I missing something?

Hi Wendy,
You need to create new time unit FTE in the IMG. assign only 86060 seconds to this time unit. Then use this unit in your RPM/cpro purpose.
regards
Amit

Similar Messages

  • How to tell if REQ1 is set active high

    Hi I am using the 6533 PCI-DIO-32HS card in a PC with traditional DAQ, looking at an existing design.  I could not find how to tell if REQ1 is set active high or low, guessing it would be set up in the DIO confg vi.

    thanks for the additional information, yes will have to wait for the external hardware.  I did have a general question about the 6533 data and control line outputs using traditional DAC.  I think for this design it is set up as a pattern IO transfer using internal REQ and an internal clock set up as a VI input, (DIO START).  Anyhow I am monitoring the card outputs with a logic analyzer and it looks like an 8 element array (of 8 bit integers) is being used for the data input (to the DIO WRITE VI) with the first 4 elements being written out on DIOA0-A7, DIOB0-B7, DIOC0-C7, and DIOD0-D7 followed by the last 4 elements also written out to DIOA0-A7, DIOB0-B7, DIOC0-C7, and DIOD0-D7.  Anyhow it looks like the clock input to the (DIO Start VI) controls the pulse width of the data.  It looks like REQ1 goes high approximately 78 microseconds before the first 32 bits are written out followed by 5 microseconds of data (with the clock set at 200k), finally followed by the second data group (5 microseconds of data).  It then looks like REQ1 stays high for 2-4 ms after the second group of 32 bits is written out before going low.   Anyhow if you are trying to clock this data into a storage device I would expect to see rising clock edges when both the first and second group of data appear on DIOA0-A7..DIOD0-D7.  I monitored all the other control lines pclk1,2 ack1 and did not see signal levels other than 0, again I do not have the DIO card connected to anything except a logic analyzer.  Would you know if it is typical to use REQ1 as a clock input to a storage device or if this can be done?

  • Significance of BC Set Activation for GRC AC 5.3

    Dear Members,
    Request you to please help me understand the significance of the BC Set Activation in an HR implemented ABAP system,
    w.r.t. AC 5.3
    The AC 5.3 runs separately on the a java instance and connected to ABAP with the help of JCo's.
    Kindly assist, if you have any clue regarding the documentation for the same.
    I want to understand, the criticality of activating the VIRSANH and VIRSAHR BC Sets on ABAP side for the proper functioning of the GRC AC 5.3 and if their is any variation in the results of GRC , if the BC Sets are activated/ or if not activated.
    Many Thanks !
    Regards,
    Edited by: Molwana Lokisang on Feb 2, 2010 11:02 AM

    Molwana,
    the BC Set needs to be activated as part of the post-installation process. It will also provide you with data that the RTA needs to work.
    I have done this for many customers, there is no risk involved. All the "extra" data is in a separate namespace.
    Frank.

  • Set Active Directory Folder Permission

    We have added a Lion server to an active directory domain, however I cannot determine how to set Active Directory permissions on shared folders on the Mac. Ideally we want our windows users to access shared folders on the Mac however we would like to lock them down so we can restrict some users.
    Is anyone able to point me in the right direction?
    Thanks in advance.

    Similar Discussion:
    How i can update thumbnailPhoto AD attribute with powershell?
    http://social.technet.microsoft.com/Forums/scriptcenter/en-US/403cda19-7a63-4d95-a273-8f7885e836cd/how-i-can-update-thumbnailphoto-ad-attribute-with-powershell?forum=ITCG
    Regards,
    Rafic
    If you found this post helpful, please give it a "Helpful" vote.
    If it answered your question, remember to mark it as an "Answer".
    This posting is provided "AS IS" with no warranties and confers no rights! Always test ANY suggestion in a test environment before implementing!

  • DFS question: What does "Set Active" mean on the DFS tab in windows server 2008

    When I logged into server and went to the DFS tab to check and see if it was replicating between two of the different shares. I saw one share marked as "Active"  What does that mean?
    I also seen a button that said "Set Active"  I am guessing its related to my above question.
    I am guessing its the root?  The directory that others pull from or something?   I tried to google that all over and could not find anything specific to this question which I found very odd.

    If you have multiple folder targets in the namespace then the 'Set Active' button is how you change the current referral (at a client level).  Only enabled folder targets will be listed.  Users can choose a different server if they wish (maybe
    for performance reasons).

  • Set active column of matrix using SDK

    Hi,
    How do i set active (FormSettings>TableFormat>Active Checkbox) column of matrix in order form using SDK?
    Thanks

    HI
    replace the COLID with the id of the column, and put this code into the form_load event and beforeaction=false
            oMatrix.Columns.Item("COLID").Editable = True
            oMatrix.Columns.Item("COLID").Visible = True
    regards,
    J.
    if the answer is ok, please reward.

  • BC sets activated in the system

    Hi All,
      I want to check what all BC sets are activated in my system.
      Could you please guide me the navigation path.
    I understand that with the transaction SCPR20 I can see what all BC sets are available in the system.
    Regards,
    Jitender

    Hello,
    you can look in the tables
    SCPRACPM                       BC Sets: Activation Logs (Messages)      
    SCPRACPP                       BC Sets: Activation Logs (BC Set Names)  
    SCPRACPR                       BC Sets: Activation Logs (Activated Data R
    SCPRACTP                       BC Set: Activated in local system        
    SCPRACTR                       BC Set: Active records in Local System   
    SCPRACTST                      BC Sets: Activation Status               
    SCPRACTV                       BC Sets: Activated in local system (old) 
    SCPRACTW                       BC Set: Active Values in Local System    
    SCPRACTX                       BC Set: Activated in local system        
    using transaction SE16.
    Hope this helps.
    Kr,
    Andreas

  • Difference between "Activated" & "Executed"

    Hi WLPI Gurus,
    In the WLPI Studio, under Task Properties,
    there are 2 tabs :
    Activated Executed
    what is the logic we should follow for deciding
    where to place
    Business Components and other stuff - under
    Actvated or
    Executed?
    Whatever is under "Activated", gets initiated
    (as I understand)
    when this task is called. But what is under
    "Executed" gets
    initiated only when the "Execute Task.." is
    done or when the
    user clicks on this from the Worklist. Correct?
    Also, why does the Worklist (JSP Worklist)
    show the tasks
    which are already executed? By doing this,
    is there not the
    risk that the user can click on this task again
    and thereby
    initiating the task more than one time and
    so on...
    Any help/pointers much appreciated.
    BTW, is there any speicifc newsgroup for PI?
    Thanks, LN

    sh ip bgp
    shows the BGP table (where are stored info coming from BGP update) 
    sh ip bgp nei x.x.x.x advertised-routes 
    shows networks that your router will advertise to a specific neighbor
    sh ip bgp nei x.x.x.x recieved-routes 
    shows advertisement received from a specific neighbor;  networks (NLRI) filtered with route-map distribute-list,... are included  (Inbound soft reconfiguration must be enabled)
    sh ip bgp nei x.x.x.x routes 
    shows only routes sent by a specific neighbor and not filtered or discarded (i.s accepted)
    sh ip route 
    show routing table; it contains the best route for each network (best is first of all the lowest administrative distance, then the lowest metric)
    Bye,
    enrico.
    PS please rate if useful

  • Set active plan versions

    Hi,
    How to enable new entries(Menu path) in set active plan versions in IMG actvity.
    thanks and regards,
    naidu.

    hey Thanks for the Same ,
    yes thats the standard,as i am working on a test client inthe menu path
    PM-global settings-plan version maintainance-set active plan version i dont find the standard instead all the fields are hidden ,if i have to make these fields active.
    Naidu.

  • BC set Activation

    HI Gurus
    I need to execute the SAP Best practice scenario D85: Engagement Management with Project Controlling. Need help in activating the BC set and how to do that. I know it is done by Basis but still any steps for SD functionals.
    Thanks and Regards
    Jeyashankar

    As BC Sets, only customizing data can be captured. So, there is hardly any role of functional consultant.
    After BC sets are applied to the system, functional consultant can go for preapartion any master data related updation or changes or creation for desired functionality and going further go test run process desired.
    Regards
    JP

  • Zero suppression is set active for rows & columns - but find empty rows

    hi,
    In the query properties i set zero suppression active for all rows and columns, but in the workbook, when i execute the report i still find empty rows. i refreshed the query from the workbook, and have done everything, but still i find empty rows.
    Can anyone help me in this regard?
    thanks,
    rani

    Hi,
    you found empty rows in WorkBook, what about the Query Output ?
    please check the below: 
    Re: Suppressing result rows when KF values are zero?
    Hope this helps you
    Regards
    ReddY A

  • MDG F 7.0 BC Set Activation Error

    We are trying to upgrade MDG 7 Finance Configurations from 6.1. We have successfully upgraded to 7.1 and activated all business functions related to finance in 7.0.
    As part of the MDG F configuration, We are trying to activate BC Set CA-MDG-APP-FIN_EDITION_CR_04. But , We are getting couple of errors saying Entity type ACCCCDET of data model 0G used in multiple edition types,Entity type ACCOUNT of data model 0G used in multiple edition types .....ETC.
    When I double click on error, Error message suggesting us "Delete entity type ACCCCDET from edition type 0G_ACC or 0G_ALL" etc for each message.
    To Solve the problem, I removed all existing running change requests by executing USMD_DELETE_CREQUEST report and then I also removed all previous change request types related to finance from option (MDGIMG -> General Settings -> Process Monitoring --> change requests -> Create Change Request).
    But, I am not able to delete entity types under Edition type. ( MDGIMG -> General Settings -> Process Monitoring --> Create Edition Type). I am getting Error message saying Entity Type ACCCDET can not be deleted. Edition Type OG_ACC used by edition ACCT OCT.
    Please help me in solving the issue on BC Set activaiton.
    ( This Error is coming from Step 2 in Configuring MDG 7 for Financials guide. Page 5/47)
    Thanks in advance.

    Hello Joesph
    The reason for this issue is you already have editions created through NWBC for your ACCOUNT and ACCCDET entity type. If there is any edition created for edition type, system won't allow you to remove the entity type from the edition.
    Only thing you can do is delete the editions and then remove the entity type from your edition type through mdgimg. But if the data is already there in edition, it become difficult to delete it and you can't perform any change to the edition type.
    Better way out is to do it manually instead of copying the BC set.
    Kiran

  • How to set activity type for a cost center

    i was practicing the split valuation topic and for the that i was making a routing for a product so that i can have that product for inhouse production.
    while using ca01(to create routing), i am facing a problem with the activity type.
    when i am setting up the operation i am getting an error " activity type # is not set up for cost center 10004220 in year 2007"
    can you please tell me how should i come out of it.
    thankyou very much

    hi Nandha, i am sorry but i could not do it. i am new in this. let me make my problem more clear to you.
    i was creating a routing using ca01
    after puttig all the details i switched to operations tab and in operation tab i put workcenter as (1111 - lathe, may be i am wrong as i told you i am just practicing).
    i did not put anything on that screen and then when i pressed enter it took me to another screen with name Operation check.
    here is the layout of the problem on that screen
                          std val      unit     activity type     efficiency
    set up                            min        1422
    machine                         min        1421
    labor                              min        1420
    and then curser being on the std value i am getting this error "activity type 1422 is not set up for cost center 1000 4220 in the year 2007.when i am ignoring it it is switching to next std val coloumn and the same error.
    thankyou for your time

  • Problem facing with BC-Set activation while doing servicedesk configuration

    Hi All,
    I have installed Solution Manager 4.0,And i applied all the latest service pack (both abap and java service packs).I try to activate some BC-sets(ex: Service_desk_change_request_32A,Service_desk_change_request_32F2).When try to activiation it is giving  Runtime errors like DATA_LENGTH_0
    and Exception CX_SY_RANGE_OUT_OF_BOUNDS
    Can some one help how to activiate the BC-Sets in the process of configuring the Service desk userin the SolutionManager system.
    regards
    srujan

    Hi JP,
    The BC sets in note 898614 are in IMG activity "Activate Service Desk BC Set". I put this together for myself just to track what the heck is going on while I configured this.
    Cofiguration of Basic Settings:
    SAP Solution Manager Implementation Guide
    ..SAP Solution Manager
    ....Configuration
    ......Basic Settings
    ........Standard Configuration of Basic Settings
    ..........Solution Manager
    ............Activate Maintenance Optimizer BC Set
    ................SOLMAN40_MOPZ_TTYP_SLMO_000
    ................SOLMAN40_CHARM_PROXYFACT_001
    ............Activate Service Desk BC Set
    ..............This task refers to the BC sets in note 898614:
    ................SOLMAN40_SDESK_BASICFUNC_000
    ................ZSOLMAN40_SDESK_ACT_ADVCLOSE_001
    ................ZSOLMAN40_SDESK_ACTIONLOG_001
    ................ZSOLMAN40_SDESK_TPI_ACT_AST_001
    ..............Then note 898614 says apply BC sets in note 931196:
    ................ZSOLMAN40_SDESK_TEXTTYPES_001 << This errors out
    ................SOLMAN_CORPF_TEXTTYPES_001 << Should I?
    For me activating BC Set ZSOLMAN40_SDESK_TEXTTYPES_001 gets the error:
    COMV_TEXT_CUST No data found for writing activation links for object COMV_TEXT_CUST.
    Also, I think I may have blown it by not doing the piece lists. I have heard differently whether to do it or not and in which client and how to get it form dev to prod.
    Also, I could be wrong but I thought SERVICE_DESK_CHANGE_REQUEST_32A was from SolMan 3.2.
    Please post if you get it all figured out.
    Good luck,
    David

  • BC sets activation for GRC 10.0 Risk Management

    Hi ,
    I am new to  Risk management,please suggest  the required list of   BC set for activation.
    Thanks in advance,
    Varun

    Hi Varun ,
    Apart from the common BC sets , You also need to activate RM Specific BC sets.
    You can find the list in  Installation Guide " SAP Access Control, SAP Process Control, and SAP Risk  Management 10.0/10.1"
    ( https://websmp108.sap-ag.de/~form/sapnet?_SCENARIO=01100035870000000202&_SHORTKEY=01100035870000718172 )
    Here is the list for your quick reference:
    BC_SET_ANALYSIS_PROFILE
    BC-SET_ACTIVITY_TYPES
    BC_SET_BENEFIT_CATEGORY
    BC_SET_DEFINE_CATEGORIES_POWL
    BC_SET_DEFINE_THREE_POINT_ANALYS
    BC_SET_DRIVER_CATEGORY
    BC_SET_IMPACT_CATEGORY
    BC_SET_IMPACT_LEVEL
    BC-SET_INFLUENCE_STRENGTH
    BC_SET_MAINTAIN_DEFAULT_QUERY
    BC-SET_MAINTAIN_OPP_RESP_TYPES
    BC_SET_MAINTAIN_USER_RESP
    BC_SET_OBJECTIVE_CATEGORIES
    BC_SET_PROBABILITY_LEVEL_ID
    BC_SET_PROBABILITY_LEVEL_MATRIX
    BC-SET_RESPONSE_EFFECTIVENESS
    BC-SET_RESPONSE_TYPE
    BC_SET_RISK_APETITE
    BC_SET_RISK_LEVEL
    BC_SET_RISK_LEVEL_MATRIX
    BC_SET_RISK_PRIORITY_MATRIX
    BC_SET_ROLES
    BC_SET_SPEED_OF_ONSET
    BC-SET_LOSS_MATRIX_COLORS
    BC_SET_UNIT_MEASURE
    BC-SET_RISK_RESPONSE_TYPE
    BCSET-GRRM-GRFNV_POLICYTYPE
    BCSET-GRRM-GRRMVPOLICYRESP
    BCSET-GRRM-GRFNV_POLICYTYPE 
    BCSET-GRRM-GRRMVPOLICYRESP 
    Thanks & Regards
    Uma Shankar T

Maybe you are looking for