Setting AEP Documents to Open by Default with Adobe After Effects CC NOT Adobe After Effect CC 2014 on a Mac

I have installed some of the CC 2014 products for testing. Until the rest my department moves from CC to CC 2014 I need to open and create new projects in CC as the CC 2014 AEP's won't open in other versions.
The issue is when I try to change the file association, in the Get Info inspector, from "Adobe After Effects CC.app" to "Adobe After Effects CC 2014.app" and hit "Change All" it always reverts back to CC 2014. I have tried this as an administrator and even when logged in as administrator. It is like Creative Cloud overrides it. You can do one at a time but you cannot set the default.
I would like to "roll back" my file associations for AE and PS to CC but I don't want to uninstall the 2014 versions if possible as I have already install many plug-ins, license keys, scripts, etc. and everything is working fine within the apps. Is it possible?
Thanks for any help.

Zenco Havoc wrote:
Its because of my graphics card.
That makes no sense at all. CC 2014 is available in the Creative Cloud App. Just download it. The system requirements for both are the same. IF CC runs, CC 2014 will.

Similar Messages

TS1717 I have updated to version 11 of itunes and now it wont open comes up with comment saying it is not installed correctly or corrupt. Help

I have updated to version 11 of itunes and now it wont open comes up with comment saying it is not installed correctly or corrupt. Help

A complete uninstall/reinstall is worth a crack with that one:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

I cant open many website with firefox, there say filter not let open this site, but when i open they with internet explorer not have any problem.

i cant open many website with firefox, there say filter not let open this site, but when i open they with internet explorer not have any problem.

Could you post an example of the filter message?
This article has more information on the filters built in to Firefox: [http://www.mozilla.org/en-US/firefox/phishing-protection/ Firefox Phishing and Malware Protection].
It's possible that you also have a Firefox add-on, or external software, that is filtering what you see. However, we don't have enough information to help identify it yet. If you want to review a list of your add-ons, you can find them under: Help > Troubleshooting Information.

Is there any way to set the inspector in Pages to default with your personal settings?

Every time I want to use Pages I have to use the inspector to indicate if I want a header and footer or not. That is getting annoying. I would like to be able to set margins and if I want the header and footer or not and then make these the default settings. Is there any way to do this?

It appears to me after tinkering around that I can set a page like I want it and then save it as a template. I did so to a folder in Finder. Now the only way I can automatically bring up "default" settings on a Pages blank document is to go directly to that file in Finder and open it from there, not from Pages itself. Is there any other way to do this?

Can I set same documents to open when I restart Pages?

On a previous version, before a recent update, it used to be the case that when you opened Pages, it would open any documents you had open the last time you quit pages (if you quit Pages without closing those documents).
Now it doesn't do that, but I want it to. Is there a way to make Pages open all the documents you had open the last time you quit Pages?
Thanks!

You haven't said what version you are using. "Recent" doesn't really say.
It should reopen previously open documents, so it depends what you are using and what you have done.
Peter

Please Help!! Links to other PDF documents in my PDF document open in Adobe Acrobat Professional but NOT Adobe Reader XI

Hi everyone,
I really hope someone can help me with this problem. I work for a software company and we have a release coming up. Every release requires me to create a 'menu' which is what users see when they insert the release CD. I create this menu in Adobe Acrobat Professional, and add links to all the PDF manuals we have for our products. When I open the Menu in Acrobat Professional, all links open fine. When just attempting to open the links using the default Adobe Reader (which i'm guessing most of our customers will use), nothing happens, not even an error is generated. I'm ensuring I link to the documents that reside in the same folder on my directory as the menu. Is this something to do with relative/absolute links? Something to do with Reader XI, as I don't remember having this problem for our last release? Foxit also seems to work in opening the links.
Thanks

I’m using version 11.0.10. So where the Menu resides in a folder ready to be burnt on to a CD, that same folder is where the links point to.
Thanks

Open pdf file with the client's Reader, not in a browser, HOW ?

Hi All,
I have a web application written in VB in wich an user can request to open a pdf file stored on the server.
I'm looking for a script that will force the requested pdf to be opened in client's Reader and not in a browser's Reader plugin,
Thanks, Yan

This is not a problem that can be addressed with LiveCycle Designer script. Designer or Acrobat script has context once the PDF is open, which does not help you. Perhaps a solution can be found in Windows Script Host. I have not touched WSH in a long time but I recall that is possible to do something like...
' Get a Reader instance by ProgID
Set obj = GetObject(,"AcroExch.Document")
' Check if an instance of Reader is not already running. If an instance is running, create a new instance.
If TypeName(obj) <> "Document" Then
Set obj = CreateObject("AcroExch.Document")
End If
or
' Start the application (Reader) associated with the file type
Set obj = GetObject("c:\foobar.pdf")
Steve

Unable to open Sharepoint site with Designer "Folder name is not valid"

Hi all,
I'm using SharePoint 2013 with SharePoint Designer 2013, but currently I'm facing a weird behaviour.
I can open my preproduction SharePoint portal with SharePoint Designer 2013, but when I'm trying to open my production environment, I'm receiving the error "The folder name is not valid". Even it doesn't ask for credentials.
Anyone knows what is happening?

There are few other options people used to solve this issue. refer to the following posts if you haven't so far. hope it helps.
http://hightechdave.com/sharepoint-designer-the-folder-name-is-not-valid-error/
http://mesiag.blogspot.com/2011/10/sharepoint-designer-2010-folder-name-is.html
http://community.office365.com/en-us/f/154/t/11825.aspx
Cheers,

I want to upload files to my website. I can open the website with ftp, but I do not see any possibility to upload my website html pages..?

I have a website and I have all the rights to it. Now I want to upload my html pages, but I cannot see how I do this with firefox.

Hi,
You can add enhanced functionality using the [https://addons.mozilla.org/en-US/firefox/addon/fireftp/ FirefFTP] add-on. The installed add-ons are listed in Firefox ('''Tools '''('''Alt''' + '''T''') > '''Add-ons'''. Please also go through the reviews, ratings, FAQ and help. There could also be similar add-ons.
[http://fireftp.mozdev.org/help.html FireFTP support]

PDF files opens in Adobe Reader 9 but not Adobe Acrobat Pro 9

After one of my users digitally signs a PDF file, and saves it, he cannot open it again.
He gets either a reference memory error or a Font Capture error.
I can open the same PDF file with Adobe Reader 9 and Adobe Acrobat Pro 8.
If I take the same file to a system with Adobe Acrobat Pro 9 - same error on the same file.
Happens to my administrator account as well.
Acrobat Pro 9 version: 9.4.1
Adobe Reader version: 9.4.1
Acrobat Pro 8 version: 8.2.5
Windows XP SP3
IE 7
Acrobat Pro 9 has been completely uninstalled, the system rebooted, and the software reinstalled.
Customer's profile has been rebuilt.
The error message in the event log are:
Event Type: Information
Event Source: Application Popup
Event Category: None
Event ID: 26
Date: 1/31/2011
Time: 12:56:02 PM
User: N/A
Computer: XXXXXXX
Description:
Application popup: Font Capture: Acrobat.exe - Application Error : The instruction at "0x037c33c9" referenced memory at "0x00000010". The memory could not be "read".
or
Event Type: Information
Event Source: Application Popup
Event Category: None
Event ID: 26
Date: 1/31/2011
Time: 1:13:06 PM
User: N/A
Computer: XXXXXXX
Description:
Application popup: Adobe Acrobat Pro: Acrobat.exe - Application Error : The instruction at "0x037c33c9" referenced memory at "0x00000010". The memory could not be "read".

So the option was already checked when opened the document. I went ahead and unchecked, closed, reopened just to test and it's still not displaying correctly.
In response to Bill@VT. The image is on top of a white background so I can't tell if there is space there or not, it's just all white.
She showed me another document that's doing something similar today. This time the pdf was done with a green background and now the background shows as white. It was created the same way with Indesign and it shows fine in Reader and the Windows preview pane just not Acrobat. I'm trying to get the user to find the installation media so I can remove and reinstall, but I'm not sure if she will be able to find it.

Bug: Temp files with 0-Byte size are not removed after PDF export

Post Author: chaplin
CA Forum: Exporting
When exporting to PDF through the CR-API (CRPE) the temporary files epfHHHH.tmp and ctmHHHH.tmp in the windows temporary path (with HHHH = hexadecimal number with 4 digits) are not deleted when they are 0-Byte in size - even after closing the application which called the CRPE-API. When HHHH reaches its limit (hex FFFF = dec 65535) the Crystal Reports DLLs are not able to create more PDFs - the export aborts with an error and the PDFs are 0-Byte in size.
This behaviour was tested/reproduced with Crystal Reports 8.5, but (as many other long-term bugs) might be also exist in later releases of Crystal Reports as well as on the other SDK interfaces.
KBase Article ID:2009412, Track ID: ADAPT00011016 and Escalation ID: 1472 describes a solution for this problem and Business Objects says that using Crxf_pdf.dll, version 8.6.0.108, dated 04/25/2002 or later solves the problem. We are using a newer one from 2003 (version 8.6.2.429) and still see this problem. It seems that 0-Byte-Files are ommitted from the deletion.
Does anybody know a workaround or solution for this bug?

Wendell,
This forum is for handling issues migrating from non-Oracle databases to Oracle databases.
As this is an Oracle to Oracle issue using SQL*Developer export it would be better to open a new thread in the SQL*Developer forum -
SQL Developer
There will be more people there who can help with this problem.
Regards,
Mike
Edited by: mkirtley on May 14, 2010 10:16 AM

Gnome 3.2 suspend with status menu: screen is not locked after wakeup

Locking the screen with gnome-screensaver-command --lock or with the lock screen option from the status menu works fine.
However, when the suspend from the status menu is used, although it does seem to go into lock mode before it suspends (the screen goes black and there is a little lock icon in to top corner), it never asks for a password after it wakes up. This happens on both my laptops with gnome3 by the way.
The wiki article https://wiki.archlinux.org/index.php/Gn … ter_resume tells me to use
# gsettings set org.gnome.power-manager lock-use-screensaver 'false'
But that key doesn't exist in gnome 3.2.
Any ideas ?

In the meantime I found the following:
- When I suspend with the power button, the screen is locked, but not when I use the status menu option
- This seems to be related to the screen setting 'Lock screen after'. I had it set to 1 minutes. When I change it to 'after the screen goes blank' the
problem doesn't seem to occur.
So, the way it looks now, it uses the same settings for delaying the locking the screen after the screensaver kicks in when locking the screen before suspend.
Which doesn't make much sense. And then the behaviour is still inconsistent with the power button suspend.

Passing arrays with Call Library Function does not work after application builder

Calling a DLL with Call Library Function which requires an array of data works correctly in Labview, but after building an exe with application builder, the call no longer works. Dereferecing the pointer in the DLL retuns all 0s and not the actual values.
Solved!
Go to Solution.
Attachments:
TEST.zip ‏28 KB

I did not run your code because it is a little unclear to me what it does.
Two things:
First, is the DLL you are calling the DLL-ified version of PopUpNames.vi? Then the problem is likely that the panel is not being built into the DLL.
When LabView builds an application / dll, it strips the front panel and block diagram from all VIs that it doesn't think need to show a panel at run time. This reduces file size and increases code security. The App Builder's panel inclusion logic can be overridden by Build Specifications -> Source File Settings -> Remove front panel. A better method is to put a property node on a control in a window you want to show marking it "visible"; this is sufficient to tell the App Builder it should keep the panel.
Currently Source File Settings shows "no dependencies" (clearly incorrect---another evil side effect of Express VIs I guess) but if you change the settings as shown below to keep ALL panels, one might hope the App Builder can figure it to keep the panel when it deconstructs the Express VI. (Alternatively convert the Express VI into a regular one.)
A second comment: I am a bit flummoxed at the larger goal here. You are calling LabView DLL from LabView, which doesn't make a lot of sense, so I assume your larger goal is to call LabView from C or vice-versa. In that case be aware that your DLL is x86 (32-bit) but you are passing 64-bit ints as your pointers. In this case it is 32-bit LabView with 32-bit pointers in embedeed in 64-bit containers calling 32-bit LabView with 32-bit pointers in embedeed in 64-bit containers, so it all works, but if your going to call this from C or whatnot you're going to have to follow that same design.
When calling C code the LabView Call Library Function does have a "unsigned pointer-sized integer" data type that always appears to be 64 bits in the dev env but which actually passes a 64 or 32-bit int to the DLL depending on the environment. The "pointer sized int" has to be 64 bits in the "LabView" part of the code because LabView's strong typing requires the data type to be determined at compile time. Casting all pointers to the largest data type in LabView makes it possible to write platform-independent code, but down at the Call Library level you still have to put the right number of bytes on the stack.

Hi there can anyone help as i am unable to contact Apple for support with my printer which will not print after recent software update? this is the email i tried to send to apple with no success, can anyone help please.......Dear Apple, I'm pulling my hai

Hi there,
Can anyone out there help, after a recent Apple software update my Epson Stylus Photo RX640 will no longer print, every other aspect of the printer works fine including the scanner but it just will not print, I sent an email to apple but all i got was an automated reply directing me to their support page, the email i sent is below this explains in full what the problem is & what i have done to try & fix this problem.
Dear Apple,
I'm pulling my hair out after a recent software update from apple, since this update my Epson Stylus Photo RX640 will not print, every other function of the printer including the scanner works fine,
Please see attached file of the error message coming up in the print queue.
I have spent days trying to fix this, i have been onto Epsons website & followed their resolution for this error message to no avail, after contacting them again with the results i got an email back saying : In response to your email, the RX640 will use an inbox or gutenprint driver on Mac OS X 10.6.8, it is not compatible with an Epson driver.
I have also tried re-installing drivers from original Discs for the printer but it still will not print, obviously this error has been caused by Apple's latest software update, when are Apple going to fix this problem? i need my printer working ASAP.
Regards
Brian
PS i obviously can't attach the error message so here it is: Error:/Library/Printer/Epson/inkjetprinter 2/filter/rastertoescpll.app/contents/mac os/rastertoescpll/failed
Thank You all in advance
Regards
Brian

It is hardly Apple's fault that Epson can't/won't update their driver, but at least Epson suggest that you use the Gutenprint driver, which in any case is far better that what Epson offer.
You can get it here:
http://gimp-print.sourceforge.net/
You can download the latest version from here:
http://sourceforge.net/projects/gimp-print/
Have you downloaded the recent Apple update to Epson drivers?
http://support.apple.com/kb/DL1398

Earbuds with Mic and Skip Functions not working after IOS 6.0.1 update?

I have earbuds with a mic and skip buttons functions and noticed that mic and the skip music functions stop working after updating to IOS 6.0.1. Now when I talk on the phone the mic on iPhone itself is working and not the mic on my earbuds. Also when playing music he skip functions has stop working. Has anyone noticed these problems?

Phone restart > if that doesn't work then do a reset of the settings. Full restore would be the last option.

Setting AEP Documents to Open by Default with Adobe After Effects CC NOT Adobe After Effect CC 2014 on a Mac

Similar Messages

Maybe you are looking for