Setting as "clipping" an existent path

Hi!
Suppose i have a path, that is named "Path1". Ho can i set by script to assign "0,5" px to that path, so it become a clipping path?
Thanks to all guru of scripting!

hi,
if your configurin virtual hosting...i would prefer to update it through from front end(em console) because
configuration changes are effected immediately,because the OHS server is automatically bounced when you modify the configuration from em console
now as you have made the changes directly through httpd.conf file,run the command
dcmctl updateconfig -v
This should solve your problem.
Take a backup of httpd.conf file before making the changes
Regards
Fabian
Edited by: Fabian on Feb 9, 2011 4:52 AM

Similar Messages

How can I add to an existing path using the pencil tool?

This probably seems like a rather elementary question, but
whenever I draw a path using the pencil tool, reselect it,
hover over the endpoint, and the click and drag to extend
the line off into a different direction, Illustrator will often
(but not always) erase the existing path and leave only the
new one that I drew.
To wit:
In step 1 above, I draw a line with the Pencil tool.
In step 2 above, I reselect the line from step 1, hover over the endpoint, and then continue to draw further.
However, as can be seen in step 3, the line from step 1 disappears after I draw the new path.
I am aware of the pencil setting, "Edit selected paths", and I have checked it to edit selected paths
within 12 pixels for the above example. What I am doing in the above example, and what I
want to do, is to be able to add more paths onto an existing one using the pencil tool,
rather than have a completely new path being drawn every time I lift up my pen to finish
drawing the previous path.
I also realize that I can do this with the pen tool; but the pen tool is a more
precise tool (and somewhat more cumbersome), and I prefer to have more
of the rough-handed look from time to time.
Finally, I also know that I can use the direct selection tool to select endpoints
from two different paths and then join them using the join command;
but this seems to be more trouble than it's worth in many cases, especially
if I want to do it frequently for a more long and complicated line.
Am I expecting too much out of Illustrator?
Is my idea of how to use the existing tools wrong in this case?
Is there some piece of knowledge I'm missing?
I'm on Illustrator CS5, Mac OS X 10.6.8, using a Wacom Intuos4 tablet.
However, I have confirmed the above on Illustrator CS4 for Mac as well.
Any help or comments would be much appreciated.
Jeff

Thanks @rcraighead - the Live Paint process seems a bit overkill for simply adding
a new path onto an existing pencil path, but I did try the first idea you suggested,
which was tracing a bit over the last part of the existing path and then continuing
on to extend the path. It's a bit imprecise because the existing path gets slightly
modified, but it seems to work pretty well all in all. Nice idea indeed - thanks a million.
I also found that in AI CS5, I can use the selection tool to select all of the paths
in this case and then join them using the join command. I thought I needed to
select individual anchor points for this to work, but it actually works really
well, better than I thought. I seem to recall that previous versions of Illustrator
were a lot more picky with the Join command, but then again this might just
have been my lack of understanding.
I'm curious to know what other solutions to the above problem that other users
might have, so I will leave this question unanswered for a bit...
but I will use your initial technique described - it seems to work
pretty well, in absence of other options Many thanks again for your timely help.
Jeff

Brush sometimes adds to existing path and sometimes starts new one?

When drawing a path with the brush tool and then placing the brush back over an anchor point to continue the path, sometimes it continues the path and sometimes it deletes the path and just starts a new one. Why does it sometimes add to the existing path and sometimes start a new one?
Thank you.

If you have the path slected, wil edit the path, if it is not slected will create a new path. Aslo there si a distance withing 12 pixels is what I am set to. You can increase that valeu if you find you are getting too many new paths.

UD - Selected set code does not exist

Dear All,
We have create material in 0001 plant. It is consumable material and QA is not required. But by mistake Inspection flag was activited in material master.
Now material received is in QA Stock. We have created inspection plan and not inspection lot is in REL status.
During UD system shows following message :
"Selected set code does not exist, or data entered is incomplete"
Is there any way to take stock in unrestricted without doing any QA activity ?
Thanks and Regards,
Nirav

Hi,
Why don't you simply complete the Stock posting using 'Inspection lot stock' tab in QA32?
If you only need to take the stock out of QI and doesn't need Usage decision then why do bother about it.
Besides, this error comes when the UD selected set defined in Configuration is not maintained for the Plant.
To check this, Follow this path,
QCC0> Quality inspection> Maintain inspection type. Select the Relative inspection type and see what is maintained.
Once you maintain this Selected set for the plant 0001 using QS51, you won't get this error. Other way, define that selected set in the configuration which is already maintained for the plant.
ntn

Warp tool following an existing path

Does anyone of You have an idea if its possible to make the Warp Tool (or any of the liquifying tools) follow an existing path (comparable to the Stroke Path-function in Photoshop)?
What I want that for is to simulate one of the effects occasionally applied on banknotes where a regular line-pattern is regionally slightly offset within the area of some shape without breaking the lines, as seen here left of the portrait and above the guilloche:
http://de.wikipedia.org/wiki/Bild:20_ATS_banknote.jpg
Any suggestions appreciated.

Christoph,
Did you find an answer to the modulation effect?
I downloaded Excentro but am unable to place art as is suggested by Excentro in order to use the stroke width modulation feature.
I am trying to achieve the same effect you described but cannot seem to find any info from Excentro as to how exactly to place the art in order to then perform this miracle. Is it possible that this feature does not work with Excentro Lite? Maybe one must pay the $500.00 in order to create this effect.
I imported both types. A photoshop greyscale image tiff and a vector pdf. Both were denied by the program.
"5. Stroke width modulation and reliefs
The stroke width of background paths can be changed by either modulation settings specified by the user or by the pixel value of the underlying grayscale image. In the similar way portions of paths located over non-white areas of the underlying image can be offset to create bas-relief like effects.
Any graphics file in common image formats (raster TIFF or vector PDF) can be imported into an Excentro document to be used with this feature. You can even apply Step & Repeat sets to the images to vary its position, size, brightness or contrast."

How to set up TimeCapsule (4th) to create own private (wired) network behind Airport Express (5th) that is set up to join existing wifi-network of fritz adsl modem/router?

I work in an office building with free Wifi to connect to the Internet. I want to be able to use this internetconnection, but at the same time I want to shield of my own wired network.
I've made the following configuration:
- fritz adsl modem / router
- Airport Extreme (5th gen) set up to join existing wireless network (green light, works)
- Lan-cable from lan-port AE to wan-port TC (4th gen)
- Lan-cable from TC to Mac
- Lan-cable from TC to Printer
When I set my TC (network-settings) in bridge-mode everything works fine, but my Mac and Printer get an IP-address from the fritz modem / router and are visible to others.
I tried to set TC in NAT/DHCP-mode, but then I get the error message that I should set a static IP-adress for TC. When I set TC in DHCP-mode, it looses connection to the AE. I'm not sure what to do now. Does anyone know how to set up my TC and create my own private network and still be able to get on the internet?

Hajenius wrote:
Is there a better alternative? I'd rather not want to reset my TC every day.
You are using free internet.. so there is a price to pay.. that is convenience and non-ideal network setup.
The better alternative is to pay for your own connection. Then you are completely free of the possibility of others in the bullding seeing your connection. (as long as you secure the wireless).
But I think you are probably over worrying about public wifi.. if it is setup right.. ask the building admins.. it should be setup so each user cannot see another users connection. This is typical for most wifi setup and simply means you can see internet connection but nobody else on the connection. ie other wireless users.
Having a router with NAT makes it then more secure again and allows clients on your own network to interact with each other. But you can setup wireless to the free wifi for every client.. (depending on how many IP you are allowed).. and run a secondary network without internet access. This is easy for desktop etc where you have a wireless and a wired connection but less convenient for mobile devices.. unless you use a cloud connection and each client can link and share via that.
Have I made the explanation worse??
Think of it this way.. if you had 3 laptops.. all 3 could connect to the internet from the building wifi.. but they cannot talk to each other or share resources in local office. You can put resources out in the cloud, that can be shared.. but that adds traffic and most free services are not fast.
Now you can also plug all three into Time Capsule by ethernet.. and share local resources. Files, printers backup etc. This network is not connected to the internet at all. Each laptop has internet via free wifi and local connection.
For devices like iphones that have no ethernet or other method.. you could use local wireless and public wireless.. but in turns.. still the only advantage is less issues with double NAT.. if that causes problems.. then this is an alternative.

I have moved to uk from ireland and bought new iphone, set up using my existing Apple ID account and profile but won't let me buy install or update apps??

I have moved to uk from ireland and bought new iphone, set up using my existing Apple ID account and profile but won't let me buy install or update apps??
Can anyone advise me on what I need to do?
My existing account is linked to ireland as my bank account details are there, does this make a difference?
Please help!

Until you get a UK bank account and credit card, buy and redeem UK iTunes gift cards for use in the iTunes and Mac App Stores. But you need to switch your region/country to the UK store in your account information, as you can't use UK iTunes gift cards in the Irish stores, the gift cards are country specific.

Bought Premier Elements yesterday. EVERY time I try to open a set of clips with Editor, I am told I have to sign into my Adobe first. I do this and wait for several minutes for the password dialogue box to open, enter my password. then wait and wait until

Bought Premier Elements 13 yesterday. EVERY time I try to open a set of clips with Editor, I am told I have to sign into my Adobe first. I do this and wait for several minutes for the password dialogue box to open, enter my password. then wait and wait until my pw is recognized. Accept agreement. Agreement screen disappears and I'm back where I started. Try to open video clips with editor again and get the same demand to log in. Please advise asap. thx

Oldcameraman
Please do not duplicate a thread. The threads are answered as soon as possible. We are not Adobe. Just user to user.
I have answered your most recent of the duplicates
Premier Elements 13 Organizer Works. Editor doesn't. Log in doesn't work
It is uncertain just how far we can go to help you since you do not appear to have Premiere Elements any
longer.Seems you demanded a refund from Adobe Chat, got it, and now are left with a non purchased program which I
am not sure can be used.
Duplicates tend to confuse the person asking the question as well as those attempting to reply. As I suggested in the
above mentioned thread, try to sort out your situation with Adobe via its Adobe Chat.
ATR

Error during unattended install of SQL 2012 (..setting 'CLTRESULTDIR' does not exist.)

Hi ALl,
I'm trying an automated install of SQL 2012 on WIndows 2012, but I keep running into this error (using a configuration.ini file generated by running through setup and grabbing it just before I clicked 'OK')
Contents of summary log:
Overall summary:
   Final result:                  Failed: see details below
   Exit code (Decimal):           -2068578304
   Exit facility code:            1204
   Exit error code:               0
   Exit message:                  The specified directory 'C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\ResultDir' for setting 'CLTRESULTDIR' does not
exist.
   Start time:                    2015-01-09 10:19:12
   End time:                      2015-01-09 10:20:07
   Requested action:              Install
Setup completed with required actions for features.
Troubleshooting information for those features:
   Next step for SQLEngine:       SQL Server Setup was canceled before completing the operation. Try the setup process again.
   Next step for Replication:     SQL Server Setup was canceled before completing the operation. Try the setup process again.
   Next step for FullText:        SQL Server Setup was canceled before completing the operation. Try the setup process again.
   Next step for DQ:              SQL Server Setup was canceled before completing the operation. Try the setup process again.
   Next step for AS:              SQL Server Setup was canceled before completing the operation. Try the setup process again.
   Next step for RS:              SQL Server Setup was canceled before completing the operation. Try the setup process again.
   Next step for RS_SHP:          SQL Server Setup was canceled before completing the operation. Try the setup process again.
   Next step for RS_SHPWFE:       SQL Server Setup was canceled before completing the operation. Try the setup process again.
   Next step for DQC:             SQL Server Setup was canceled before completing the operation. Try the setup process again.
   Next step for IS:              SQL Server Setup was canceled before completing the operation. Try the setup process again.
   Next step for Conn:            SQL Server Setup was canceled before completing the operation. Try the setup process again.
   Next step for Adv_SSMS:        SQL Server Setup was canceled before completing the operation. Try the setup process again.
   Next step for SDK:             SQL Server Setup was canceled before completing the operation. Try the setup process again.
   Next step for BC:              SQL Server Setup was canceled before completing the operation. Try the setup process again.
   Next step for DREPLAY_CTLR:    SQL Server Setup was canceled before completing the operation. Try the setup process again.
   Next step for DREPLAY_CLT:     SQL Server Setup was canceled before completing the operation. Try the setup process again.
   Next step for BIDS:            SQL Server Setup was canceled before completing the operation. Try the setup process again.
   Next step for SSMS:            SQL Server Setup was canceled before completing the operation. Try the setup process again.
   Next step for SNAC:            SQL Server Setup was canceled before completing the operation. Try the setup process again.
   Next step for SNAC_SDK:        SQL Server Setup was canceled before completing the operation. Try the setup process again.
   Next step for Writer:          SQL Server Setup was canceled before completing the operation. Try the setup process again.
   Next step for BOL:             SQL Server Setup was canceled before completing the operation. Try the setup process again.
   Next step for Browser:         SQL Server Setup was canceled before completing the operation. Try the setup process again.
Machine Properties:
   Machine name:                  IDCSQLTST11
   Machine processor count:       2
   OS version:                    Future Windows Version
   OS service pack:
   OS region:                     United States
   OS language:                   English (United States)
   OS architecture:               x64
   Process architecture:          64 Bit
   OS clustered:                  No
Product features discovered:
   Product              Instance             Instance ID
Feature                                  Language
Edition              Version         Clustered
Package properties:
   Description:                   Microsoft SQL Server 2012
   ProductName:                   SQL Server 2012
   Type:                          RTM
   Version:                       11
   SPLevel:                       0
   Installation location:         E:\SQL_Server_2012_StandardEdition\x64\setup\
   Installation edition:          Standard
Product Update Status:
   None discovered.
User Input Settings:
   ACTION:                        Install
   ADDCURRENTUSERASSQLADMIN:      false
   AGTSVCACCOUNT:                 NT Service\SQLSERVERAGENT
   AGTSVCPASSWORD:                <empty>
   AGTSVCSTARTUPTYPE:             Automatic
   ASBACKUPDIR:                   C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Backup
   ASCOLLATION:                   Latin1_General_CI_AS
   ASCONFIGDIR:                   C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Config
   ASDATADIR:                     C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Data
   ASLOGDIR:                      C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log
   ASPROVIDERMSOLAP:              1
   ASSERVERMODE:                  MULTIDIMENSIONAL
   ASSVCACCOUNT:                  NT Service\MSSQLServerOLAPService
   ASSVCPASSWORD:                 <empty>
   ASSVCSTARTUPTYPE:              Manual
   ASSYSADMINACCOUNTS:            DOMAINAA\SQLADMINS
   ASTEMPDIR:                     C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Temp
   BROWSERSVCSTARTUPTYPE:         Disabled
   CLTCTLRNAME:
   CLTRESULTDIR:                  C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\ResultDir
   CLTSTARTUPTYPE:                Manual
   CLTSVCACCOUNT:                 NT Service\SQL Server Distributed Replay Client
   CLTSVCPASSWORD:                <empty>
   CLTWORKINGDIR:                 C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\WorkingDir
   COMMFABRICENCRYPTION:          0
   COMMFABRICNETWORKLEVEL:        0
   COMMFABRICPORT:                0
   CONFIGURATIONFILE:             E:\SQL_Server_2012_StandardEdition\ConfigurationFile.ini
   CTLRSTARTUPTYPE:               Manual
   CTLRSVCACCOUNT:                NT Service\SQL Server Distributed Replay Controller
   CTLRSVCPASSWORD:               <empty>
   CTLRUSERS:                     DOMAINAA\user12345
   ENABLERANU:                    false
   ENU:                           true
   ERRORREPORTING:                false
   FEATURES:                      SQLENGINE, REPLICATION, FULLTEXT, DQ, AS, RS, RS_SHP, RS_SHPWFE, DQC, BIDS, CONN, IS, BC, SDK, BOL, SSMS, ADV_SSMS,
DREPLAY_CTLR, DREPLAY_CLT, SNAC_SDK
   FILESTREAMLEVEL:               0
   FILESTREAMSHARENAME:           <empty>
   FTSVCACCOUNT:                  NT Service\MSSQLFDLauncher
   FTSVCPASSWORD:                 <empty>
   HELP:                          false
   INDICATEPROGRESS:              false
   INSTALLSHAREDDIR:              C:\Program Files\Microsoft SQL Server
   INSTALLSHAREDWOWDIR:           C:\Program Files (x86)\Microsoft SQL Server
   INSTALLSQLDATADIR:             <empty>
   INSTANCEDIR:                   C:\Program Files\Microsoft SQL Server
   INSTANCEID:                    MSSQLSERVER
   INSTANCENAME:                  MSSQLSERVER
   ISSVCACCOUNT:                  NT Service\MsDtsServer110
   ISSVCPASSWORD:                 <empty>
   ISSVCSTARTUPTYPE:              Automatic
   MATRIXCMBRICKCOMMPORT:         0
   MATRIXCMSERVERNAME:            <empty>
   MATRIXNAME:                    <empty>
   NPENABLED:                     0
   PID:                           *****
   QUIET:                         true
   QUIETSIMPLE:                   false
   ROLE:
   RSINSTALLMODE:                 DefaultNativeMode
   RSSHPINSTALLMODE:              SharePointFilesOnlyMode
   RSSVCACCOUNT:                  NT Service\ReportServer
   RSSVCPASSWORD:                 <empty>
   RSSVCSTARTUPTYPE:              Manual
   SAPWD:                         <empty>
   SECURITYMODE:                  SQL
   SQLBACKUPDIR:                  <empty>
   SQLCOLLATION:                  Latin1_General_CI_AS
   SQLSVCACCOUNT:                 NT Service\MSSQLSERVER
   SQLSVCPASSWORD:                <empty>
   SQLSVCSTARTUPTYPE:             Automatic
   SQLSYSADMINACCOUNTS:           DOMAINAA\SQLADMINS
   SQLTEMPDBDIR:                  F:\TempDB
   SQLTEMPDBLOGDIR:               <empty>
   SQLUSERDBDIR:                  E:\SQLData
   SQLUSERDBLOGDIR:               D:\SQLLog
   SQMREPORTING:                  false
   TCPENABLED:                    1
   UIMODE:                        Normal
   UpdateEnabled:                 true
   UpdateSource:                  MU
   X86:                           false
Configuration file:            C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20150109_101753\ConfigurationFile.ini
Detailed results:
   Feature:                       Database Engine Services
   Status:                        Failed: see logs for details
   Reason for failure:            Setup was canceled for the feature.
   Next Step:                     SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature:                       SQL Server Replication
   Status:                        Failed: see logs for details
   Reason for failure:            Setup was canceled for the feature.
   Next Step:                     SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature:                       Full-Text and Semantic Extractions for Search
   Status:                        Failed: see logs for details
   Reason for failure:            Setup was canceled for the feature.
   Next Step:                     SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature:                       Data Quality Services
   Status:                        Failed: see logs for details
   Reason for failure:            Setup was canceled for the feature.
   Next Step:                     SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature:                       Analysis Services
   Status:                        Failed: see logs for details
   Reason for failure:            Setup was canceled for the feature.
   Next Step:                     SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature:                       Reporting Services - Native
   Status:                        Failed: see logs for details
   Reason for failure:            Setup was canceled for the feature.
   Next Step:                     SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature:                       Reporting Services - SharePoint
   Status:                        Failed: see logs for details
   Reason for failure:            Setup was canceled for the feature.
   Next Step:                     SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature:                       Reporting Services Add-in for SharePoint Products
   Status:                        Failed: see logs for details
   Reason for failure:            Setup was canceled for the feature.
   Next Step:                     SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature:                       Data Quality Client
   Status:                        Failed: see logs for details
   Reason for failure:            Setup was canceled for the feature.
   Next Step:                     SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature:                       Integration Services
   Status:                        Failed: see logs for details
   Reason for failure:            Setup was canceled for the feature.
   Next Step:                     SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature:                       Client Tools Connectivity
   Status:                        Failed: see logs for details
   Reason for failure:            Setup was canceled for the feature.
   Next Step:                     SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature:                       Management Tools - Complete
   Status:                        Failed: see logs for details
   Reason for failure:            Setup was canceled for the feature.
   Next Step:                     SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature:                       Client Tools SDK
   Status:                        Failed: see logs for details
   Reason for failure:            Setup was canceled for the feature.
   Next Step:                     SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature:                       Client Tools Backwards Compatibility
   Status:                        Failed: see logs for details
   Reason for failure:            Setup was canceled for the feature.
   Next Step:                     SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature:                       Distributed Replay Controller
   Status:                        Failed: see logs for details
   Reason for failure:            Setup was canceled for the feature.
   Next Step:                     SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature:                       Distributed Replay Client
   Status:                        Failed: see logs for details
   Reason for failure:            Setup was canceled for the feature.
   Next Step:                     SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature:                       SQL Server Data Tools
   Status:                        Failed: see logs for details
   Reason for failure:            Setup was canceled for the feature.
   Next Step:                     SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature:                       Management Tools - Basic
   Status:                        Failed: see logs for details
   Reason for failure:            Setup was canceled for the feature.
   Next Step:                     SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature:                       SQL Client Connectivity
   Status:                        Failed: see logs for details
   Reason for failure:            Setup was canceled for the feature.
   Next Step:                     SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature:                       SQL Client Connectivity SDK
   Status:                        Failed: see logs for details
   Reason for failure:            Setup was canceled for the feature.
   Next Step:                     SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature:                       SQL Writer
   Status:                        Failed: see logs for details
   Reason for failure:            Setup was canceled for the feature.
   Next Step:                     SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature:                       Documentation Components
   Status:                        Failed: see logs for details
   Reason for failure:            Setup was canceled for the feature.
   Next Step:                     SQL Server Setup was canceled before completing the operation. Try the setup process again.
Feature:                       SQL Browser
   Status:                        Failed: see logs for details
   Reason for failure:            Setup was canceled for the feature.
   Next Step:                     SQL Server Setup was canceled before completing the operation. Try the setup process again.
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file:               C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20150109_101753\SystemConfigurationCheck_Report.htm
Exception summary:
The following is an exception stack listing the exceptions in outermost to innermost order
Inner exceptions are being indented
Exception type: Microsoft.SqlServer.Chainer.Infrastructure.InputSettingValidationException
     Message:
         The specified directory 'C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\ResultDir' for setting 'CLTRESULTDIR' does not exist.
     HResult : 0x84b40000
         FacilityCode : 1204 (4b4)
         ErrorCode : 0 (0000)
     Data:
       SQL.Setup.FailureCategory = InputSettingValidationFailure
       DisableWatson = true
     Stack:
         at Microsoft.SqlServer.Chainer.Infrastructure.InputSettingService.LogAllValidationErrorsAndThrowFirstOne(ValidationState vs)
         at Microsoft.SqlServer.Configuration.SetupExtension.ValidateFeatureSettingsAction.ExecuteAction(String actionId)
         at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
         at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun, ServiceContainer context)
     Inner exception type: Microsoft.SqlServer.Configuration.DistributedReplayExtension.DirectoryNotExistException
         Message:
                 The specified directory 'C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\ResultDir' for setting 'CLTRESULTDIR' does not exist.
         HResult : 0x87d00006
                 FacilityCode : 2000 (7d0)
                 ErrorCode : 6 (0006)
         Data:
           DirectoryPath = C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\ResultDir
           SettingName = CLTRESULTDIR
           WatsonData =
Microsoft.SqlServer.Configuration.DistributedReplayExtension.DirectoryNotExistException@6

Hello,
Open the configuration file with notepad, then go to the “features” variable. On the following article you will find what
means each parameter:
http://msdn.microsoft.com/en-us/library/ms144259(v=sql.110).aspx#Feature
You will also find the list of features supported by each edition on the following article:
http://msdn.microsoft.com/en-us/library/Cc645993(v=sql.110).aspx
For example, it seems you have DQ and DQC on that configuration file, please remove them with their corresponding commas.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com
Thanks Albert that worked when I just selected the main features and excluded ones like DQ and DRC. Thing is why would the standard media allow you to install enterprise features, create a configuration file with these enterprise features and then fail?? Why
would Microsoft tease you like that? Frustrating since I spent hours on this ..

One set of clips won't sync when trying to create a Multicam clip

I am trying to create a multicam clip using one long audio track, several clips from one camera and several clips from another camera. All three have audio recorded from the same shoot. One camera angle successfully synchronises with the audio track, placing the clips in the correct positions and leaving blank spaces where I don't have a clip. The other set of clips do not sync. It puts them in order by not synchronised. I have named camera angles and camera in the meta fields. Can anyone help? The camera which seems to sync ok was a canon XA10 the camera which doesn't is a canon 60D. The 60D took its audio teach from the linear PCM recorder I used for the Audio track. (It's still a little noisy in case anyone wants to know why I'm still using the PCM track). Can anyone help? I tried to call apple but seemingly they won't help unless I get an error message.

You could probably generate the content of the end file
separately, before including it in the final file to be accessed by
the user.
You could do this using CFSAVECONTENT
<cfquery name="getprinthtml" datasource="#dsn#">
SELECT abstractDirectory
FROM Abstract_tbl
WHERE (Abstract_ID IN (#url.abslist#))
</cfquery>
<cfsavecontent variable="theBody">
<cfoutput query="getprinthtml">
<cfinclude
template="/uploads/#getprinthtml.abstractDirectory#/#getprinthtml.abstractDirectory#_prin t.html">
<hr>
</cfoutput>
</cfsavecontent>
then use
theBody as a variable containing the entire contents at one
time when you generate the final Word doc so it does not have to
run any looping at that time.
Other than that, is there any chance the query is really only
picking up one row based on the cirteria ?

Option in dialogue NOT to cut of ends of existing paths when adjusting paths

more often than not when I draw with the pencil tool to adjust a paths course, it will delete one of the ends, either the longer or shorter side, this is not what I want, I want to simply adjust the course of the path during its journey, without losing either of the ends, it takes tedious trial and error to get it right and not lose the path, often I just end up deleting the whole path and redrawing it from scratch, which is not why I like the path adjustment option with the pencil tool,
I like to sketch out my paths to lay them down, then refine them with the path adjustment pencil option working back and forth in this manner..
if I draw over one part of the path, continue its journey like a river in another direction and cross back over that path,I want that middle section between those 2 points overlapping the original path to be redrawn, but leave the ends intact as they were...
so If I choose edit selected paths, wherever I draw over with the pencil tool on the selected existing path (in yellow below), the adjusting path is green, the original cross over points are circled in orange,
Shown here even If I consequently draw over that path several times, whereever the adjusting path (green) last crosses over the underlying selected path (yellow) will be where the adjustment ends. Ideally you wouldnt have to worry about how close you "start" the adjusting path, aslong as it crosses over that path,
so end result here, while not accurately displaying adjustment path above, you still get the idea,
but this would be a lot simpler than having to get within "x" amount of pixels to the line, and totally avoid the lost ends of original path sydnrome.
but if thats what you want,then as is currently available, where the green path crosses over the original yellow path, this continues the yellow path from that direction in the direction the green path is being drawn, then where the green line last crosses over the yellow path, the option to continue its line versus completing the yellow lines original end journey. so effectively a tickbox option in dialogue like"continue adjustment path if last crossover beyond x pixels or points" on the HUD display I suggested, as result below,
the thing with this method is it avoids the annoying and frustrating event of losing either the long or short side of the existing path..and allows quicker easier path editing.without having to pinpoint the pencil tool on the existing path or get it extremely close, thats allright when your pen tooling, but I pencil tool more often in the beginning as I do animals, flowers, faces and figures which are more organic and sketchy. then refine with pen and warp tools after..

where you cross an existing path with adjustment path on only one point, the previous line will question which of its sides from that point you want to keep, the start of its line to the adjusting paths cross over point, or the cross over point to the end of that line being adjusted,
a radio circle option in the HUD display could allow "keep long" or "keep short" as in keep the longer side of the line, or the shorter side measured from the cross over point to the either end of the line..
i`ll post a video next week to illustrate what I`m trying to say here..

I added music to a set of clips but want to stop the music there and have no music in the rest of the movie. How do I do that?

I added music to a set of clips but want to stop the music there and have no music in the rest of the movie. How do I do that?

there are two ways applying music to an iM project
http://help.apple.com/imovie/#mov3b0f955f
as 'Background' which offers lots of automatisms, but lil' control
or…
http://help.apple.com/imovie/#mov3b0fb470
as 'clip' - which can be handled asany other clip, edited, shortened, copy/paste, faded, located, etc

Set SoD detour condition on path level?

Dear forum,
We have a parallel workflow where the different paths are divided by business processes.
We want that SoD free paths continue as normal. Problematic paths are sent for resolution.
The problem as I see it is that the SoD detour condition is set on request level, not path level. Both problematic and non-problematic paths will meet the condition and are pushed into the detour. The non-problematic path will get stalled, because it has to wait for mitigation approval. Is there any workaround?
Kind Regards,
Vit V.

Hi Jose,
We have different detour paths for every parallel path. But if any SoD conflict is detected, the SoD condition is met for all paths and are pushed into the detour(s). Have you successfully tested it?
Example:
Main Paths
P1
P2
P3
Stages
_1: Manager
_2: Role Owner
_3: BPO (CAD business process of role)
P1_1
P1_2
P1_3
P2_1
P2_2
P2_3
P3_1
P3_2
P3_3
Detours (1-stage with mitigation controll approver)
P1_DT
P2_DT
P2_DT
SoD detour takes place at stages:
P1_2
P2_2
P3_2
Problem 1: If the SoD conflict condition is met, all paths are pushed into their detours
Problem 2: Let say we have two paths with SoD conflicts, a third one is not. Two mitigation controlls are applied. All three paths are pushed into their detour paths for mitigation approval.
Worst case scenaro:
Conflicting path 1: Mitgation Approver 1 approves
Conflicting path 2: Mitgation Approver 1 + Mitgation Approver 2 Approves
Non-conflicting path: Mitgation Approver 1 + Mitgation Approver 2 Approves
kind regards,
vit v

Compounding existing paths into compoundpathitems with javascript

Im not very familiar with Scripting for Illustrator, so please forgive me if Im overlooking something obvious, but I cant seem to find an easy way to compound existing pathItems into a compoundPathItem; do I have to collect the pathPoint-properties of the existing path and create a new path within a new compound path?
Any help appreciated.

I had a hard time figuring this one out too, but stumbled upon the solution. This snippet of code loops through all of the layers of the file, creates a new compound path in each layer, loops through all of the paths in the layer (ignoring the new compound path) and moves them to the compound path. You have to reset the counter as the number of items in the layer changes each time you move an item to the compound path.
var NumberOfLayers = thisFile.layers.length;
for(i = 0; i < NumberOfLayers; i ++) {
var newCompPath = thisFile.layers[i].compoundPathItems.add();
newCompPath.name = "MyCompPath";
var NumberOfItemsInLayer = thisFile.layers[i].pageItems.length;
for(j=0;j<NumberOfItemsInLayer;j++) {
    var SelItems = thisFile.layers[i].pageItems[j];
    if (SelItems.name != "MyCompPath")   {
      SelItems.moveToBeginning(newCompPath);
      var NumberOfItemsInLayer = thisFile.layers[i].pageItems.length;
      j = 0

Multiple Sets of Clips Not Needed

When I import video from a camera, it creates multiple sets of clips. I am trying to edit the video to a supplied exact times and because there are multiple sets of clips, its not easily able to figure out where an exact time of the entire video is.
My question would be, is there an easy way, within, iMovie to combine all the clips as one, or import the video so it doesn't create multiple clips? Or even say that I'd like to select say: 0:40 to 2:32 of the entire import as my Favorite.
Thanks,
Peter

OK. I took out the extra comma. Put a space in after *survey*
and put "form" in front of the variables in order to scope them. I
got it to work just then and decided to add the next radio button
and once again, the error message keeps coming up.
Here's what it looks like now.
ACTION
code***********************************************************
<html>
<head>
<title>test</title>
</head>
<body>
<CFIF IsDefined("FORM.btnSubmit")>
<CFQUERY NAME="Add" datasource="newMID">
INSERT INTO survey (
poc,
polite,
know,
time
VALUES (
'#form.poc#',
'#form.polite#',
'#form.know#',
'#form.time#'
</CFQUERY>
</CFIF>
<cfoutput>
Thank you. Your IT survey has been forwarded to our NHCPR IT
mailbox.
</cfoutput>
<cfmail to="[email protected]"
FROM="[email protected]"
SUBJECT="IT Survey Form">
Polite: #polite#
Know: #know#
POC (opt.): #poc#
Timely: #time#
</cfmail>
</body>
</html>
The ERROR msg
Error Executing Database Query.
[Macromedia][SequeLink JDBC Driver][ODBC
Socket][Microsoft][ODBC Microsoft Access Driver] Syntax error in
INSERT INTO statement.
The error occurred in
C:\Inetpub\wwwroot\PaxNew\chiefOscar\testSub.cfm: line 20
18 : '#form.polite#',
19 : '#form.know#',
20 : '#form.time#'
21 : )
22 :
SQL INSERT INTO survey ( poc, polite, know, time ) VALUES (
'kennedi', '3', '5', '3' )
DATASOURCE newMID
VENDORERRORCODE -3502
SQLSTATE 42000
Resources:
Check the ColdFusion documentation to verify that you are
using the correct syntax.
Search the Knowledge Base to find a solution to your problem.
Browser Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1;
SV1; InfoPath.1; .NET CLR 1.1.4322; .NET CLR 2.0.50727)
Remote Address 10.249.6.81
Referrer
http://205.115.107.22/chiefoscar/tsurvey.cfm
Date/Time 29-Jan-08 02:05 PM
Stack Trace (click to expand)

Setting as "clipping" an existent path

Similar Messages

Maybe you are looking for