Setting Back ground job
Hi Friends,
I wnat to set the background job with following conditions:
Monday to Friday
From 9AM to 6 PM
To run on every half an hour.
Can any one guide for the same.
Regards,
Sai Krishna
Hi Friends,
In our Organization PR is created by user dept. & PR release is completed accordingly. In this process Purchase dept. is not in the release strategy. Now PR is completly released & while converting to make PR to PO, purchase dept. found there is some problem in PR. Is there any way Purchase dept. can reject PR & send to user dept. for correcting it.
One method is to have Purchase dept. also in release strategy loop. We are having nearly 400 release strategies. To change all these will take much time. Is there any other way.
Thanks & Regards
Sai Krishna
Similar Messages
-
How to set Back ground job & get my desired output layout in sm36 & sm37 ?
Hai SAP ABAP/BASIS Gurus,
I am currently taking ME2N PO Pending value Report by setting variant in input screen & setting my own output layout ie only four field ie.Plant, Material,Currency,Still to be delivered value will be visible in output screen
I set Back ground in sm36 using my variant & i saw my output in sm37.. But I cant get output as my desired field..
This is my problem..
1) I Cant Get the Same output in shedule job [sm36 & sm37] like When i run in foreground for ME2n.
I am using ALV Scope of list..
2) If I use BEST Layout in Scope of list means i get the desired Output field layout as same as my foreground output field..
I want to get the output layout as desired & also in ALV format[ Useful for excel work]
Kindly guide me.
Thanks in advance..
swetha
Edited by: Swetha SAP Girl on Jul 2, 2009 5:06 PMHi Swetha,
To get the missed fields in the spool, while creating the background job(execute in background option) you can see the printer setting block at the end of the background job settings window, in that check the 'Spool Request Max. Width 255 char' check box and then continue. It will generate the spool list with maximum width and you can see all the fields in the spool output.
Thanks,
Muthu
Edited by: Muthu Prabakaran Selvam on Jul 3, 2009 2:35 PM -
How to run program without set back ground Job in production Server?
Hi,
I have developed 1smart forms which is takes so much time for execution and sometimes its time out.
I have used BSEG, BKPF, BSET, KONV, VBRK, VBAP, LIPS, LIKP these tables in smartform.
So give me proper solution for this issue?
Thanks
Yatin Mahetaliya.Hi,
You could call from your program the function module called SXPG_COMMAND_EXECUTE where you will call a command already defined in SM59 transaction code. You will maybe control the return code with sy-subrc. Then it will possible for you to extract data...
Don't forget that every time you call GUI_UPLOAD or any method or function from the frontend function group or ABAP object by classes like cl_gui_frontend_services, it will be impossible to run in background.
Try it..
pherasath -
Hi All,
I need to schedule a daily background job for MB52 transaction and need to save the output of MB52 in a specified directory .
Can any one tell me whether it is possible to save back ground job output in specified directory?
Thanks & Regards
k.NirmalaHi Nirmala,
Set up variant at MB52 transaction and use SM37 and Sm36 transaction to schedule job.
Define job at Sm36 and use program - RM07MLBS and use your variant.
schedule job and set up time and date for periodcally.
and it will run and you can see the status at SM37 Transaction .
the background job will create spool and which will contain your output.
if you want to download your output ,then you need to write custom program to get spool information from TSP01 table and use open dataset command to down load specifi directory.
Reward Points if it is helpful
Thanks
Seshu -
Error while activating ODS is not caught in the back ground job..
Hi All,
We have a back ground job to load data to ODS and to activate it..If there is any error while loading or activating the data, back ground job is going into loop instead of cancelling the job..As the job is going into loop we are unable to trace the error unless we cancel the job manually and checking it..We have switched off displaying any messages while doing the back ground job...also we can not set any time limit for the job as it always depends on the volume of the data.
My requirement is , back ground job must get cancelled if there is any error while loading the ODS..Can anybody suggest any idea on this..
Thanks for reading.
Umamaheswar kumarHi Uma,
A few hints for running and schedule and monitoring process chains:
- always schedule the process chain in tcode RSPC
- check the log in RSPC for error messages, or
- check BW monitor for the ODS concerned (tcode RSMO, tab Details)
if anything is not working fine, the status of the corresponding load will show you the errors, warnings ...
either in RSPC - log or RSMO.
hope it helps.
Regards,
Lilly -
Max no of lines appear in the back ground job out put
Dear All,
Please help me to solve following query,
I am execution ME2N report in background. There are more then 100000 line item in the out put. However only 5000 line appear in the output of background job.
Is there any setting in sap, where i can change the max no of out put is more then 100000 in back ground job?
Your earlier answer should be highly appreciated?
Regds,
sp sahuClick on the settings button and choose the 'The last' radio button for dispaly area and put in 10 pages.
Sometimes just clicking on the Last page button on the Tool bar will do the trick -
CAN ANY BODY TELL ME WHAT IS A BACK GROUND JOB WORK IN MM pls explain it with good example tell me 1 or 2back ground job work relevent transactions
good answer will be awarded
kiranHi,
Background job means system will automatically perform some transaction / actions at perdetermined time based on the variants selected for that program.
Ex 1: You want to see the list of PO or PR or Production order created for a day, you can create a ABAP program and give the creation date in selction screen.
Provide the Plant or doc type, file path to download the report etc..
and save the variant.
You can set this program to run during mid night( 11.00 p.m) with the sysytem date (crrent date).
So system will run this program and extract the report in Application server level as per the file location given in the program selection screen.
Ex 2:
MRP program
Ex 3.
Auto PO creation program
Thanks,
Kumar Arcot -
Scheduled back ground job not finishing
hie gurus, i need your help with back ground scheduling , i have created a background schedule to run my program after every 30min . in the job overview it shows my job released and active but its not finishing processing . the program being run picks up data from an external data base and then inserting via BDC call transaction. i have tried with a different program that inserts data into a database table and its executing and finishing well in the back ground. What could be the problem ? and how can i debug a back ground job ??
Daniel,
To start, BDCs are very out-dated. I would look for a BAPI if you are calling std SAP functionality.
Also - direct updates into std SAP tables is a HUGE "no-no"... I hope that you are updating custom tables only.
Pass that - to debug a b/g job--->
1) Set a breakpoint in your program
2) select the job in SM37
3) enter JDBG into the SAP fastpath of the SM37 screen and press ENTER
This will navigate you into a b/g debug - you can then press the debugger buttons to move to your breakpoint.
Hope that helps. -
Back ground job - report, is scheduled 49 hrs ago, still ACTIVE??
Hi Experts,
Pls. clarify one of my simple doubt that, Weather a report(which has only one SELECT statement, with key in WHERE clause) wuld take 49 hours to execute? bcoz, I scheduled a back ground job for my_report, 49 hours ago, its still ACTIVE, OR does it went to infinitive loop?
thanqHi
no one select query won't take that mucj of time
may be that program went in infinite loop
please check with that
reward if useful
<b>below is the best way to write a select query</b>
Ways of Performance Tuning
1. Selection Criteria
2. Select Statements
Select Queries
SQL Interface
Aggregate Functions
For all Entries
Select Over more than one Internal table
Selection Criteria
1. Restrict the data to the selection criteria itself, rather than filtering it out using the ABAP code using CHECK statement.
2. Select with selection list.
Points # 1/2
SELECT * FROM SBOOK INTO SBOOK_WA.
CHECK: SBOOK_WA-CARRID = 'LH' AND
SBOOK_WA-CONNID = '0400'.
ENDSELECT.
The above code can be much more optimized by the code written below which avoids CHECK, selects with selection list
SELECT CARRID CONNID FLDATE BOOKID FROM SBOOK INTO TABLE T_SBOOK
WHERE SBOOK_WA-CARRID = 'LH' AND
SBOOK_WA-CONNID = '0400'.
Select Statements Select Queries
1. Avoid nested selects
2. Select all the records in a single shot using into table clause of select statement rather than to use Append statements.
3. When a base table has multiple indices, the where clause should be in the order of the index, either a primary or a secondary index.
4. For testing existence , use Select.. Up to 1 rows statement instead of a Select-Endselect-loop with an Exit.
5. Use Select Single if all primary key fields are supplied in the Where condition .
Point # 1
SELECT * FROM EKKO INTO EKKO_WA.
SELECT * FROM EKAN INTO EKAN_WA
WHERE EBELN = EKKO_WA-EBELN.
ENDSELECT.
ENDSELECT.
The above code can be much more optimized by the code written below.
SELECT PF1 PF2 FF3 FF4 INTO TABLE ITAB
FROM EKKO AS P INNER JOIN EKAN AS F
ON PEBELN = FEBELN.
Note: A simple SELECT loop is a single database access whose result is passed to the ABAP program line by line. Nested SELECT loops mean that the number of accesses in the inner loop is multiplied by the number of accesses in the outer loop. One should therefore use nested SELECT loops only if the selection in the outer loop contains very few lines or the outer loop is a SELECT SINGLE statement.
Point # 2
SELECT * FROM SBOOK INTO SBOOK_WA.
CHECK: SBOOK_WA-CARRID = 'LH' AND
SBOOK_WA-CONNID = '0400'.
ENDSELECT.
The above code can be much more optimized by the code written below which avoids CHECK, selects with selection list and puts the data in one shot using into table
SELECT CARRID CONNID FLDATE BOOKID FROM SBOOK INTO TABLE T_SBOOK
WHERE SBOOK_WA-CARRID = 'LH' AND
SBOOK_WA-CONNID = '0400'.
Point # 3
To choose an index, the optimizer checks the field names specified in the where clause and then uses an index that has the same order of the fields . In certain scenarios, it is advisable to check whether a new index can speed up the performance of a program. This will come handy in programs that access data from the finance tables.
Point # 4
SELECT * FROM SBOOK INTO SBOOK_WA
UP TO 1 ROWS
WHERE CARRID = 'LH'.
ENDSELECT.
The above code is more optimized as compared to the code mentioned below for testing existence of a record.
SELECT * FROM SBOOK INTO SBOOK_WA
WHERE CARRID = 'LH'.
EXIT.
ENDSELECT.
Point # 5
If all primary key fields are supplied in the Where condition you can even use Select Single.
Select Single requires one communication with the database system, whereas Select-Endselect needs two.
Select Statements contd.. SQL Interface
1. Use column updates instead of single-row updates
to update your database tables.
2. For all frequently used Select statements, try to use an index.
3. Using buffered tables improves the performance considerably.
Point # 1
SELECT * FROM SFLIGHT INTO SFLIGHT_WA.
SFLIGHT_WA-SEATSOCC =
SFLIGHT_WA-SEATSOCC - 1.
UPDATE SFLIGHT FROM SFLIGHT_WA.
ENDSELECT.
The above mentioned code can be more optimized by using the following code
UPDATE SFLIGHT
SET SEATSOCC = SEATSOCC - 1.
Point # 2
SELECT * FROM SBOOK CLIENT SPECIFIED INTO SBOOK_WA
WHERE CARRID = 'LH'
AND CONNID = '0400'.
ENDSELECT.
The above mentioned code can be more optimized by using the following code
SELECT * FROM SBOOK CLIENT SPECIFIED INTO SBOOK_WA
WHERE MANDT IN ( SELECT MANDT FROM T000 )
AND CARRID = 'LH'
AND CONNID = '0400'.
ENDSELECT.
Point # 3
Bypassing the buffer increases the network considerably
SELECT SINGLE * FROM T100 INTO T100_WA
BYPASSING BUFFER
WHERE SPRSL = 'D'
AND ARBGB = '00'
AND MSGNR = '999'.
The above mentioned code can be more optimized by using the following code
SELECT SINGLE * FROM T100 INTO T100_WA
WHERE SPRSL = 'D'
AND ARBGB = '00'
AND MSGNR = '999'.
Select Statements contd Aggregate Functions
If you want to find the maximum, minimum, sum and average value or the count of a database column, use a select list with aggregate functions instead of computing the aggregates yourself.
Some of the Aggregate functions allowed in SAP are MAX, MIN, AVG, SUM, COUNT, COUNT( * )
Consider the following extract.
Maxno = 0.
Select * from zflight where airln = LF and cntry = IN.
Check zflight-fligh > maxno.
Maxno = zflight-fligh.
Endselect.
The above mentioned code can be much more optimized by using the following code.
Select max( fligh ) from zflight into maxno where airln = LF and cntry = IN.
Select Statements contd For All Entries
The for all entries creates a where clause, where all the entries in the driver table are combined with OR. If the number of entries in the driver table is larger than rsdb/max_blocking_factor, several similar SQL statements are executed to limit the length of the WHERE clause.
The plus
Large amount of data
Mixing processing and reading of data
Fast internal reprocessing of data
Fast
The Minus
Difficult to program/understand
Memory could be critical (use FREE or PACKAGE size)
Points to be must considered FOR ALL ENTRIES
Check that data is present in the driver table
Sorting the driver table
Removing duplicates from the driver table
Consider the following piece of extract
Loop at int_cntry.
Select single * from zfligh into int_fligh
where cntry = int_cntry-cntry.
Append int_fligh.
Endloop.
The above mentioned can be more optimized by using the following code.
Sort int_cntry by cntry.
Delete adjacent duplicates from int_cntry.
If NOT int_cntry[] is INITIAL.
Select * from zfligh appending table int_fligh
For all entries in int_cntry
Where cntry = int_cntry-cntry.
Endif.
Select Statements contd Select Over more than one Internal table
1. Its better to use a views instead of nested Select statements.
2. To read data from several logically connected tables use a join instead of nested Select statements. Joins are preferred only if all the primary key are available in WHERE clause for the tables that are joined. If the primary keys are not provided in join the Joining of tables itself takes time.
3. Instead of using nested Select loops it is often better to use subqueries.
Point # 1
SELECT * FROM DD01L INTO DD01L_WA
WHERE DOMNAME LIKE 'CHAR%'
AND AS4LOCAL = 'A'.
SELECT SINGLE * FROM DD01T INTO DD01T_WA
WHERE DOMNAME = DD01L_WA-DOMNAME
AND AS4LOCAL = 'A'
AND AS4VERS = DD01L_WA-AS4VERS
AND DDLANGUAGE = SY-LANGU.
ENDSELECT.
The above code can be more optimized by extracting all the data from view DD01V_WA
SELECT * FROM DD01V INTO DD01V_WA
WHERE DOMNAME LIKE 'CHAR%'
AND DDLANGUAGE = SY-LANGU.
ENDSELECT
Point # 2
SELECT * FROM EKKO INTO EKKO_WA.
SELECT * FROM EKAN INTO EKAN_WA
WHERE EBELN = EKKO_WA-EBELN.
ENDSELECT.
ENDSELECT.
The above code can be much more optimized by the code written below.
SELECT PF1 PF2 FF3 FF4 INTO TABLE ITAB
FROM EKKO AS P INNER JOIN EKAN AS F
ON PEBELN = FEBELN.
Point # 3
SELECT * FROM SPFLI
INTO TABLE T_SPFLI
WHERE CITYFROM = 'FRANKFURT'
AND CITYTO = 'NEW YORK'.
SELECT * FROM SFLIGHT AS F
INTO SFLIGHT_WA
FOR ALL ENTRIES IN T_SPFLI
WHERE SEATSOCC < F~SEATSMAX
AND CARRID = T_SPFLI-CARRID
AND CONNID = T_SPFLI-CONNID
AND FLDATE BETWEEN '19990101' AND '19990331'.
ENDSELECT.
The above mentioned code can be even more optimized by using subqueries instead of for all entries.
SELECT * FROM SFLIGHT AS F INTO SFLIGHT_WA
WHERE SEATSOCC < F~SEATSMAX
AND EXISTS ( SELECT * FROM SPFLI
WHERE CARRID = F~CARRID
AND CONNID = F~CONNID
AND CITYFROM = 'FRANKFURT'
AND CITYTO = 'NEW YORK' )
AND FLDATE BETWEEN '19990101' AND '19990331'.
ENDSELECT.
1. Table operations should be done using explicit work areas rather than via header lines.
2. Always try to use binary search instead of linear search. But dont forget to sort your internal table before that.
3. A dynamic key access is slower than a static one, since the key specification must be evaluated at runtime.
4. A binary search using secondary index takes considerably less time.
5. LOOP ... WHERE is faster than LOOP/CHECK because LOOP ... WHERE evaluates the specified condition internally.
6. Modifying selected components using MODIFY itab TRANSPORTING f1 f2.. accelerates the task of updating a line of an internal table.
Point # 2
READ TABLE ITAB INTO WA WITH KEY K = 'X BINARY SEARCH.
IS MUCH FASTER THAN USING
READ TABLE ITAB INTO WA WITH KEY K = 'X'.
If TAB has n entries, linear search runs in O( n ) time, whereas binary search takes only O( log2( n ) ).
Point # 3
READ TABLE ITAB INTO WA WITH KEY K = 'X'. IS FASTER THAN USING
READ TABLE ITAB INTO WA WITH KEY (NAME) = 'X'.
Point # 5
LOOP AT ITAB INTO WA WHERE K = 'X'.
ENDLOOP.
The above code is much faster than using
LOOP AT ITAB INTO WA.
CHECK WA-K = 'X'.
ENDLOOP.
Point # 6
WA-DATE = SY-DATUM.
MODIFY ITAB FROM WA INDEX 1 TRANSPORTING DATE.
The above code is more optimized as compared to
WA-DATE = SY-DATUM.
MODIFY ITAB FROM WA INDEX 1.
7. Accessing the table entries directly in a "LOOP ... ASSIGNING ..." accelerates the task of updating a set of lines of an internal table considerably
8. If collect semantics is required, it is always better to use to COLLECT rather than READ BINARY and then ADD.
9. "APPEND LINES OF itab1 TO itab2" accelerates the task of appending a table to another table considerably as compared to LOOP-APPEND-ENDLOOP.
10. DELETE ADJACENT DUPLICATES accelerates the task of deleting duplicate entries considerably as compared to READ-LOOP-DELETE-ENDLOOP.
11. "DELETE itab FROM ... TO ..." accelerates the task of deleting a sequence of lines considerably as compared to DO -DELETE-ENDDO.
Point # 7
Modifying selected components only makes the program faster as compared to Modifying all lines completely.
e.g,
LOOP AT ITAB ASSIGNING <WA>.
I = SY-TABIX MOD 2.
IF I = 0.
<WA>-FLAG = 'X'.
ENDIF.
ENDLOOP.
The above code works faster as compared to
LOOP AT ITAB INTO WA.
I = SY-TABIX MOD 2.
IF I = 0.
WA-FLAG = 'X'.
MODIFY ITAB FROM WA.
ENDIF.
ENDLOOP.
Point # 8
LOOP AT ITAB1 INTO WA1.
READ TABLE ITAB2 INTO WA2 WITH KEY K = WA1-K BINARY SEARCH.
IF SY-SUBRC = 0.
ADD: WA1-VAL1 TO WA2-VAL1,
WA1-VAL2 TO WA2-VAL2.
MODIFY ITAB2 FROM WA2 INDEX SY-TABIX TRANSPORTING VAL1 VAL2.
ELSE.
INSERT WA1 INTO ITAB2 INDEX SY-TABIX.
ENDIF.
ENDLOOP.
The above code uses BINARY SEARCH for collect semantics. READ BINARY runs in O( log2(n) ) time. The above piece of code can be more optimized by
LOOP AT ITAB1 INTO WA.
COLLECT WA INTO ITAB2.
ENDLOOP.
SORT ITAB2 BY K.
COLLECT, however, uses a hash algorithm and is therefore independent
of the number of entries (i.e. O(1)) .
Point # 9
APPEND LINES OF ITAB1 TO ITAB2.
This is more optimized as compared to
LOOP AT ITAB1 INTO WA.
APPEND WA TO ITAB2.
ENDLOOP.
Point # 10
DELETE ADJACENT DUPLICATES FROM ITAB COMPARING K.
This is much more optimized as compared to
READ TABLE ITAB INDEX 1 INTO PREV_LINE.
LOOP AT ITAB FROM 2 INTO WA.
IF WA = PREV_LINE.
DELETE ITAB.
ELSE.
PREV_LINE = WA.
ENDIF.
ENDLOOP.
Point # 11
DELETE ITAB FROM 450 TO 550.
This is much more optimized as compared to
DO 101 TIMES.
DELETE ITAB INDEX 450.
ENDDO.
12. Copying internal tables by using ITAB2[ ] = ITAB1[ ] as compared to LOOP-APPEND-ENDLOOP.
13. Specify the sort key as restrictively as possible to run the program faster.
Point # 12
ITAB2[] = ITAB1[].
This is much more optimized as compared to
REFRESH ITAB2.
LOOP AT ITAB1 INTO WA.
APPEND WA TO ITAB2.
ENDLOOP.
Point # 13
SORT ITAB BY K. makes the program runs faster as compared to SORT ITAB.
Internal Tables contd
Hashed and Sorted tables
1. For single read access hashed tables are more optimized as compared to sorted tables.
2. For partial sequential access sorted tables are more optimized as compared to hashed tables
Hashed And Sorted Tables
Point # 1
Consider the following example where HTAB is a hashed table and STAB is a sorted table
DO 250 TIMES.
N = 4 * SY-INDEX.
READ TABLE HTAB INTO WA WITH TABLE KEY K = N.
IF SY-SUBRC = 0.
ENDIF.
ENDDO.
This runs faster for single read access as compared to the following same code for sorted table
DO 250 TIMES.
N = 4 * SY-INDEX.
READ TABLE STAB INTO WA WITH TABLE KEY K = N.
IF SY-SUBRC = 0.
ENDIF.
ENDDO.
Point # 2
Similarly for Partial Sequential access the STAB runs faster as compared to HTAB
LOOP AT STAB INTO WA WHERE K = SUBKEY.
ENDLOOP.
This runs faster as compared to
LOOP AT HTAB INTO WA WHERE K = SUBKEY.
ENDLOOP. -
Back ground job scheduling(urgent)
Hi all,
can anybody will help me ,regarding the step by step procedure to schedule the background job.
i have to do back ground job scheduling for one program so that in that specified time my report will execute?
plz suggest.
ur idea will be highly appreaciated.
Regards
pabitraHI
Please follow the below steps to schedule a background job.
First - create a Report-Variant for your print programm using the SE38.
Then...
1.) Call the transaction SM36
Enter a Job Name / You may set a job class other
than 'C' (See online Help on that field).
2.) Push the STEP Button
3.) Push the ABAP Program button
Enter der programm name an the variant name
save that window
4.) Push "BACK"
5.) Push "Start Condition"
6.) Push Date/Time
Enter Date + Time for the first start
Mark "Periodic Job" !!
7.) Push "Period Values"
Set the period you want the job to be started
Save everything
For more info please refer to this link:
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/c4/3a7ed1505211d189550000e829fbbd/content.htm">Background Processing</a>
Kind Regards
Eswar -
Back Ground Job Printing Problem
Dear Experts,
We schedled one back ground job with spool generation. Ecery thing is working fine but in printing selecton parameters are printing along with out put data.
That means, if i gave 1000 materials in my variant, in spool first 1000 materials are printing an then actually out put is printing. i need to avoid these printing of selection set.
Please help me...
Thanks in advanceHello,
Pleas find if there is any "PRINT_SELECTION" function module in report, which should be responsible for printing selection screen parameter values.
Thanks. -
Hi SAP guru's
if I execute alv list display and alv grid display in back ground is there any difference.
is it possible printing a logo in back ground job schedule.
Points will be rewarded.Hi Durga, this will help u.
Some differences:
a) from abap coding point of view,
alv list is done with Function modules,
alv gris can also be done with FM,
but can also be done using OO concepts.
b) Alv grid (using oo concept) requires
designing the screen layout .
Hence, in one screen, we can show more
then one alv grid
(we cannot show more than
one alv list on one screen)
c) ALV grid uses ActiveX controls
present on the Presentation Server.
Hence, it consumes More Memory
on the presentation server.
d) ALV LIST is Display Only.
Whereas
ALV Grid Can Be made EDITABLE for entry purpose.
e) In alv grid, these options are possible,
but not in alv list.
without horizontal lines
without vertical lines
without cell merging during sorts
display total lines above the entries
ALV LIST Can be coded using only FMs
ALV GRID Can be coded using FMs and object oriented concepts
ALV LIST Can be displayed hieraicharlly
ALV GRID cannot be displayed hierarichally
Also, I am sending LOGO report, pls check it.
REPORT YMS_EXCISE MESSAGE-ID E4 NO STANDARD PAGE HEADING LINE-SIZE 350. .
TABLES : J_1IEXCHDR, " header table
J_1IEXCDTL, " item table
J_1IPART2, " Excise Part II details
LFA1, " vendor master table
J_1IMOVEND, " vendor excise details table
MSEG, " Document Segment: Material
MKPF, " Header: Material Document
DD07T, " domain text table
T001W. " Plant and Branch Details
DATA : BEGIN OF IT_CHDR OCCURS 100,
DOCNO LIKE J_1IEXCHDR-DOCNO,
DOCYR LIKE J_1IEXCHDR-DOCYR,
EXNUM LIKE J_1IEXCHDR-EXNUM,
EXDAT LIKE J_1IEXCHDR-EXDAT,
WERKS LIKE J_1IEXCHDR-WERKS,
EXBED LIKE J_1IEXCHDR-EXBED,
EXCCD LIKE J_1IEXCHDR-EXCCD,
ECS LIKE J_1IEXCHDR-ECS,
END OF IT_CHDR.
DATA : BEGIN OF IT_CDTL OCCURS 100,
DOCYR LIKE J_1IEXCDTL-DOCYR,
DOCNO LIKE J_1IEXCDTL-DOCNO,
EXNUM LIKE J_1IEXCDTL-EXNUM,
EXDAT LIKE J_1IEXCDTL-EXDAT,
LIFNR LIKE J_1IEXCDTL-LIFNR,
MATNR LIKE J_1IEXCDTL-MATNR,
MAKTX LIKE J_1IEXCDTL-MAKTX,
CHAPID LIKE J_1IEXCDTL-CHAPID,
EXBAS LIKE J_1IEXCDTL-EXBAS,
EXBED LIKE J_1IEXCDTL-EXBED,
ECS LIKE J_1IEXCDTL-ECS,
MENGE LIKE J_1IEXCDTL-MENGE,
MEINS LIKE J_1IEXCDTL-MEINS,
RDOC2 LIKE J_1IEXCDTL-RDOC2,
END OF IT_CDTL.
DATA TEXT(10).
DATA : BEGIN OF IT_OUT OCCURS 0,
SERIALNO LIKE J_1IPART2-SERIALNO,
TEXT1 LIKE TEXT,
EXNUM LIKE J_1IEXCDTL-EXNUM,
EXDAT LIKE J_1IEXCDTL-EXDAT,
NAME LIKE LFA1-NAME1,
DDTEXT LIKE DD07T-DDTEXT,
EXCCD LIKE J_1IEXCHDR-EXCCD,
BUDAT LIKE MKPF-BUDAT,
EXBAS LIKE IT_CDTL-EXBAS,
EXBED LIKE IT_CDTL-EXBED,
ECS LIKE IT_CDTL-ECS,
MATNR LIKE IT_CDTL-MATNR,
MAKTX LIKE IT_CDTL-MAKTX,
CHAPID LIKE IT_CDTL-CHAPID,
MENGE LIKE IT_CDTL-MENGE,
MEINS LIKE IT_CDTL-MEINS,
DEL_IND(1),
END OF IT_OUT.
DATA IT_PART2 LIKE J_1IPART2 OCCURS 0 WITH HEADER LINE.
DATA S_NO(4) .
DATA DB_CNT LIKE SY-TABIX.
DATA EBELN_T LIKE MSEG-EBELN .
TYPE-POOLS : SLIS.
DATA : AFIELD TYPE SLIS_FIELDCAT_ALV.
DATA : LIST_HEADER TYPE SLIS_T_LISTHEADER,
FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
LS_FTCAT TYPE LVC_S_FCAT,
SORTCAT TYPE SLIS_T_SORTINFO_ALV,
SORTCAT_LN LIKE LINE OF SORTCAT,
G_REPID LIKE SY-REPID,
G_BACK_GROUND(70), "like bapibds01-objkey,
GS_VARIANT LIKE DISVARIANT,
G_SAVE ,
GT_EVENTS TYPE SLIS_T_EVENT,
ALV_EVENT TYPE SLIS_ALV_EVENT,
EVENTCAT TYPE SLIS_T_EVENT,
EVENTCAT_LN LIKE LINE OF EVENTCAT,
LAYOUT_IN TYPE SLIS_LAYOUT_ALV,
LAYOUT_IN1 TYPE SLIS_LAYOUT_ALV.
CONSTANTS : GC_FORMNAME_TOP_OF_PAGE TYPE SLIS_FORMNAME VALUE
'TOP_OF_PAGE',
GC_FORMNAME_USER_COMMAND TYPE SLIS_FORMNAME VALUE
'USER_COMMAND',
GC_FORMNAME_BEFORE_OUTPUT TYPE SLIS_FORMNAME VALUE
'BEFORE_OUTPUT'.
ALV_EVENT TYPE SLIS_ALV_EVENT,
DATA EX_NO LIKE IT_CHDR-EXNUM VALUE 0.
DATA REGTYP_1 LIKE J_1IPART2-REGTYP.
SELECTION-SCREEN BEGIN OF BLOCK B WITH FRAME.
PARAMETERS WERKS TYPE J_1IEXCHDR-WERKS.
SELECT-OPTIONS : BUDAT FOR J_1IEXCHDR-EXDAT.
PARAMETERS : R1 RADIOBUTTON GROUP GRP DEFAULT 'X',
R2 RADIOBUTTON GROUP GRP.
SELECTION-SCREEN END OF BLOCK B.
INITIALIZATION.
G_REPID = SY-REPID.
G_SAVE = 'A'.
PERFORM BUILD_EVENT USING GT_EVENTS[].
PERFORM ALV_EVENT_INIT.
AT SELECTION-SCREEN.
REFRESH LIST_HEADER.
PERFORM TOP_OF_PAGE_LIST_HEADER USING LIST_HEADER.
START-OF-SELECTION.
PERFORM ALV_EVENT_INIT.
G_REPID = SY-REPID.
G_BACK_GROUND = ' ' .
IF R1 = 'X'.
CLEAR R2. CLEAR : REGTYP_1.
REGTYP_1 = 'A'.
set titlebar 'BALAJI' with DB_CNT.
ELSEIF R2 = 'X'.
CLEAR R1.CLEAR : REGTYP_1.
REGTYP_1 = 'C'.
set titlebar 'BALAJI1' with DB_CNT.
ENDIF.
SELECT * FROM J_1IPART2
INTO CORRESPONDING FIELDS OF TABLE IT_PART2
WHERE REGTYP = REGTYP_1 AND
TRNTYP = 'GRPO' AND
BUDAT IN BUDAT.
DOCYR = IT_CDTL-DOCYR AND
DOCNO = IT_CDTL-DOCNO.
LOOP AT IT_PART2.
SELECT SINGLE * FROM J_1IEXCHDR
INTO CORRESPONDING FIELDS OF IT_CHDR
WHERE TRNTYP = 'GRPO' AND
DOCYR = IT_PART2-DOCYR AND
DOCNO = IT_PART2-DOCNO AND
WERKS = WERKS AND
exdat IN BUDAT.
ORDER BY EXDAT.
IF SY-SUBRC = 0.
APPEND IT_CHDR.
ELSE.
CONTINUE.
ENDIF.
IF SY-SUBRC <> 0.
MESSAGE E084.
ENDIF.
ENDLOOP.
LOOP AT IT_CHDR.
SELECT * FROM J_1IEXCDTL
INTO CORRESPONDING FIELDS OF IT_CDTL
FOR ALL ENTRIES IN IT_CHDR
WHERE
TRNTYP = 'GRPO' AND
DOCNO = IT_CHDR-DOCNO AND
DOCYR = IT_CHDR-DOCYR AND
EXNUM = IT_CHDR-EXNUM AND
EXDAT = IT_CHDR-EXDAT AND
WERKS = IT_CHDR-WERKS.
IF SY-SUBRC = 0.
APPEND IT_CDTL.
ELSE.
CONTINUE.
ENDIF.
ENDSELECT.
ENDLOOP.
LOOP AT IT_CDTL.
CLEAR TEXT.
DB_CNT = DB_CNT + 1.
READ TABLE IT_CHDR WITH KEY EXNUM = IT_CDTL-EXNUM.
READ TABLE IT_PART2 WITH KEY DOCNO = IT_CDTL-DOCNO .
IT_OUT-SERIALNO = IT_PART2-SERIALNO.
SELECT SINGLE NAME1 FROM LFA1
INTO IT_OUT-NAME
WHERE LIFNR = IT_CDTL-LIFNR.
SELECT SINGLE * FROM LFA1
WHERE LIFNR = IT_CDTL-LIFNR.
IF LFA1-LAND1 EQ 'IN'.
TEXT = 'INVOICE'.
IT_OUT-TEXT1 = TEXT.
ELSE.
TEXT = 'BOE'.
IT_OUT-TEXT1 = TEXT.
ENDIF.
SELECT SINGLE * FROM J_1IMOVEND
WHERE LIFNR = IT_CDTL-LIFNR.
SELECT SINGLE * FROM DD07T
INTO IT_OUT-DDTEXT
WHERE DOMNAME = 'J_1IVTYP' AND
DDLANGUAGE = 'EN' AND
DOMVALUE_L = J_1IMOVEND-J_1IVTYP.
IF DD07T-DDTEXT = 'First Stage Dealer of indigenous excisable goods'
OR
DD07T-DDTEXT = 'Second Stage Dealer of indigenous excisablegoods'.
DD07T-DDTEXT = 'Dealer'.
ENDIF.
IT_OUT-DDTEXT = DD07T-DDTEXT.
ELSEIF DD07T-DDTEXT = 'Second Stage Dealer of indigenous excisable
*goods'.
DD07T-DDTEXT =
CLEAR EBELN_T.
SELECT SINGLE LFBNR FROM MSEG
INTO EBELN_T
WHERE MBLNR = IT_CDTL-RDOC2 .
SELECT SINGLE * FROM MSEG
WHERE BWART = '106' AND
LFBNR = EBELN_T ."and
ebeln = ebeln_t.
IF SY-SUBRC = 0.
IT_OUT-DEL_IND = 'X'.
ELSE.
IT_OUT-DEL_IND = ' '.
ENDIF.
SELECT SINGLE BUDAT FROM MKPF
INTO IT_OUT-BUDAT
WHERE MBLNR = EBELN_T ."MSEG-LFBNR.
IT_OUT-EXNUM = IT_CDTL-EXNUM.
IT_OUT-EXDAT = IT_CDTL-EXDAT.
IT_OUT-EXCCD = IT_CHDR-EXCCD.
IT_OUT-EXBAS = IT_CDTL-EXBAS.
IT_OUT-EXBED = IT_CDTL-EXBED.
IT_OUT-ECS = IT_CDTL-ECS.
IT_OUT-MATNR = IT_CDTL-MATNR.
IT_OUT-MAKTX = IT_CDTL-MAKTX.
IT_OUT-CHAPID = IT_CDTL-CHAPID.
IT_OUT-MENGE = IT_CDTL-MENGE.
IT_OUT-MEINS = IT_CDTL-MEINS.
APPEND IT_OUT.
EX_NO = IT_CDTL-EXNUM.
ENDLOOP.
Title Portion
IF REGTYP_1 = 'A'.
SET TITLEBAR 'BALAJI' WITH DB_CNT.
ELSEIF REGTYP_1 = 'C'.
SET TITLEBAR 'BALAJI1' WITH DB_CNT.
ENDIF.
AFIELD-COL_POS = 1.
AFIELD-FIELDNAME = 'SERIALNO'.
AFIELD-SELTEXT_L = 'INPUTS'.
AFIELD-JUST = 'L'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 2.
AFIELD-FIELDNAME = 'TEXT1'.
AFIELD-SELTEXT_L = 'TYPE OF DOC'.
AFIELD-JUST = 'L'.
AFIELD-DECIMALS_OUT = '0'.
AFIELD-NO_ZERO = 'X'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 3.
AFIELD-FIELDNAME = 'EXNUM'.
AFIELD-SELTEXT_L = 'DOC.NO'.
AFIELD-JUST = 'L'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 4.
AFIELD-FIELDNAME = 'EXDAT'.
AFIELD-SELTEXT_L = 'DOC.DATE'.
AFIELD-JUST = 'C'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 5.
AFIELD-FIELDNAME = 'NAME'.
AFIELD-SELTEXT_L = 'NAME OF THE SUPPLIER'.
AFIELD-NO_ZERO = 'X'.
AFIELD-JUST = 'L'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 6.
AFIELD-FIELDNAME = 'DDTEXT'.
AFIELD-SELTEXT_L = 'TYPE-OF-SUPPLIER'.
AFIELD-JUST = 'L'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 7.
AFIELD-FIELDNAME = 'EXCCD'.
AFIELD-SELTEXT_L = 'ECC OF THE SUPPLIER'.
AFIELD-NO_ZERO = 'X'.
AFIELD-JUST = 'L'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 8.
AFIELD-FIELDNAME = 'BUDAT'.
AFIELD-SELTEXT_L = 'INPUT RECV DATE'.
AFIELD-JUST = 'C'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 9.
AFIELD-FIELDNAME = 'EXBAS'.
AFIELD-SELTEXT_L = 'ASSESSABLE-VALUE'.
AFIELD-DO_SUM = 'X'.
AFIELD-JUST = 'R'.
AFIELD-DECIMALS_OUT = '2'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 10.
AFIELD-FIELDNAME = 'EXBED'.
AFIELD-SELTEXT_L = 'DET OF CREDIT TAKEN CENVAT'.
AFIELD-JUST = 'R'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 11.
AFIELD-FIELDNAME = 'ECS'.
AFIELD-SELTEXT_L = 'DET OF CREDIT TAKEN E-CESS'.
AFIELD-JUST = 'R'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 12.
AFIELD-FIELDNAME = 'MATNR'.
AFIELD-SELTEXT_L = 'MATERIAL-CODE'.
AFIELD-JUST = 'L'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 13.
AFIELD-FIELDNAME = 'MAKTX'.
AFIELD-SELTEXT_L = 'DESCRIPTION'.
AFIELD-JUST = 'L'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 14.
AFIELD-FIELDNAME = 'CHAPID'.
AFIELD-SELTEXT_L = 'TARIFF-ID'.
AFIELD-JUST = 'L'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 15.
AFIELD-FIELDNAME = 'MENGE'.
AFIELD-SELTEXT_L = 'QUANTITY'.
AFIELD-JUST = 'R'.
AFIELD-DO_SUM = ' '.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 16.
AFIELD-FIELDNAME = 'MEINS'.
AFIELD-SELTEXT_L = 'UOM'.
AFIELD-JUST = 'C'.
APPEND AFIELD TO FIELDCAT.
AFIELD-COL_POS = 17.
AFIELD-FIELDNAME = 'DEL_IND'.
AFIELD-SELTEXT_L = 'Deleted'.
AFIELD-JUST = 'C'.
APPEND AFIELD TO FIELDCAT.
* LAYOUT FOR ZEBRA CATLOG
LAYOUT_IN-COLWIDTH_OPTIMIZE = 'X'.
LAYOUT_IN-ZEBRA = 'X'.
LAYOUT_IN-GET_SELINFOS = 'X'.
LAYOUT_IN-CONFIRMATION_PROMPT = 'X'.
LAYOUT_IN-DETAIL_POPUP = 'X' .
SORTCAT-decimals = '0'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = G_REPID
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
I_SAVE = G_SAVE
IS_VARIANT = GS_VARIANT
IT_FIELDCAT = FIELDCAT
IT_SORT = SORTCAT
IS_LAYOUT = LAYOUT_IN
IT_EVENTS = EVENTCAT
I_BACKGROUND_ID = g_back_ground
TABLES
T_OUTTAB = IT_OUT.
*& Form TOP_OF_PAGE_LIST_HEADER
text
-->LIST_HEADERtext
FORM TOP_OF_PAGE_LIST_HEADER USING LIST_HEADER TYPE SLIS_T_LISTHEADER.
DATA : HLINE TYPE SLIS_LISTHEADER,
TEXT(60) TYPE C.
CLEAR : HLINE,TEXT.
HLINE-TYP = 'H'.
WRITE 'ROOTS INDUSTRIES LTD' TO TEXT.
HLINE-INFO = TEXT.
APPEND HLINE TO LIST_HEADER.
SELECT SINGLE * FROM T001W WHERE WERKS = WERKS.
CLEAR : HLINE,TEXT.
HLINE-TYP = 'H'.
WRITE 'PLANT :' TO TEXT.
WRITE WERKS TO TEXT+8.
HLINE-INFO = TEXT.
APPEND HLINE TO LIST_HEADER.
CLEAR : HLINE,TEXT.
HLINE-TYP = 'H'.
WRITE T001W-NAME1 TO TEXT.
HLINE-INFO = TEXT.
APPEND HLINE TO LIST_HEADER.
CLEAR : HLINE,TEXT.
HLINE-TYP = 'H'.
WRITE T001W-STRAS TO TEXT.
HLINE-INFO = TEXT.
APPEND HLINE TO LIST_HEADER.
CLEAR : HLINE,TEXT.
HLINE-TYP = 'H'.
WRITE T001W-ORT01 TO TEXT.
HLINE-INFO = TEXT.
APPEND HLINE TO LIST_HEADER.
CLEAR : HLINE,TEXT.
HLINE-TYP = 'H'.
WRITE 'DATE :' TO TEXT.
WRITE BUDAT-LOW TO TEXT+7.
IF BUDAT-HIGH NE ''.
WRITE 'TO' TO TEXT+18.
WRITE BUDAT-HIGH TO TEXT+22.
ENDIF.
HLINE-INFO = TEXT.
APPEND HLINE TO LIST_HEADER.
ENDFORM. "TOP_OF_PAGE_LIST_HEADER
*& Form ALV_EVENT_INIT
text
FORM ALV_EVENT_INIT .
CLEAR ALV_EVENT.
ALV_EVENT-NAME = SLIS_EV_TOP_OF_PAGE.
ALV_EVENT-FORM = 'ALV_TOP_OF_PAGE'.
APPEND ALV_EVENT TO EVENTCAT.
CLEAR ALV_EVENT.
ALV_EVENT-NAME = SLIS_EV_TOP_OF_LIST.
ALV_EVENT-FORM = 'ALV_TOP_OF_LIST'.
APPEND ALV_EVENT TO EVENTCAT.
CLEAR ALV_EVENT.
ALV_EVENT-NAME = SLIS_EV_END_OF_LIST.
ALV_EVENT-FORM = 'ALV_END_OF_LIST'.
APPEND ALV_EVENT TO GT_EVENTS.
CLEAR ALV_EVENT.
ALV_EVENT-NAME = SLIS_EV_END_OF_PAGE.
ALV_EVENT-FORM = 'ALV_END_OF_PAGE'.
APPEND ALV_EVENT TO GT_EVENTS.
ENDFORM. "ALV_EVENT_INIT
*& Form ALV_TOP_OF_PAGE
text
FORM ALV_TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = LIST_HEADER
I_LOGO = 'ENJOYSAP_LOGO'.
ENDFORM. "ALV_TOP_OF_PAGE
*& Form BUILD_EVENT
text
-->P_GT_EVENTS[] text
FORM BUILD_EVENT USING P_EVENTS TYPE SLIS_T_EVENT.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = P_EVENTS
EXCEPTIONS
LIST_TYPE_WRONG = 1
OTHERS = 2.
READ TABLE P_EVENTS WITH KEY NAME = SLIS_EV_USER_COMMAND INTO
ALV_EVENT.
IF SY-SUBRC = 0.
MOVE GC_FORMNAME_USER_COMMAND TO ALV_EVENT-FORM.
APPEND ALV_EVENT TO P_EVENTS.
ENDIF.
READ TABLE P_EVENTS WITH KEY NAME = SLIS_EV_BEFORE_LINE_OUTPUT INTO
ALV_EVENT.
IF SY-SUBRC = 0.
MOVE GC_FORMNAME_BEFORE_OUTPUT TO ALV_EVENT-FORM.
APPEND ALV_EVENT TO P_EVENTS.
ENDIF.
ENDFORM. " BUILD_EVENT
kindly reward if found helpful.
cheers,
Hema. -
Hi,
I have watched all the threads regarding Back Ground job like SE36 & SE37. I have given a back ground job and its not working.
Its an ABAP Program which is creating an OLEDB Connection to MSACCESS and then retrieving and updating database table. The program is working very fine on foreground but when it is given to back ground job then it shows that the program is running, i mean in delay the time is ticking. But at last it is canceled by the system.
What's the thing i am missing or what should i do here? I have already set my program at high priority.
Thanks.Hi Atish,
Are you sure that we cannot run in background? Can you please explain me why it cant be done.
Thanks,
Inder. -
Back Ground Jobs for ESS/MSS
Hi,
I would like to know all the back ground jobs to be scheduled for ESS/MSS.
As all the data updated in the portal as to reflect in r/3 system and all the data updated in r/3 system to portal.
Regards
VishYou need to set the background jobs depending on the functionality which is being implemented and what the data ?
for eg: if it's leave request there background jos which needs to scheduled
RPTARQEMAIL (Leave Requests: Send E-Mails)
RPTARQPOST (Leave Requests: Post)
RPTARQSTOPWF (Leave Requests: Complete Current Workflows)
hope this would help you.. -
Output should be in Text format from Back ground job
Hi friends,
I have scheduleda back ground job. In the receipent i ahve put my user mail ID. when the job was finished the output came as HTML file. where as my user wants a Text file or excel file.
We are in ECC 5.0 and i am just scheduling standard ABAP program( costing run
Is it possible , if yes then, please let me know where to change the setting.
Cheers
PKHi,
I tried the same , it did not work for me. But when i contacted my Basis Guy through SCOT he changed. Now the text file has started coming.
But now next problem is my spool request is of 215 pages but system is sending the text file for only first 10 pages..
I have changed the setting for display from 10 pages 215 pages . and belwo even changed the seeting to permanenet between logons..Still system did not send the file to email Id.
can you help mein this regards
cheers
PK
Maybe you are looking for
-
In several programs like Photoshop Elements and also in the Epson Print CD program, it used to show the icons of the files I want to open which helped me decide if that was the file I wanted. It has now lost that ability and just says preview and giv
-
Can't Open pdf File in iBooks From Web Page
I'm trying to open an online PDF. I have to choices: "Open in iBook" or "Open with...iBooks, Kindle or Evernote". Ive tried each of these options. When I select an option nothing happens. How can I fix either iBooks or Safari to open pdf's from the
-
Can I have a 9i OEM with 10g Database for repository?
Guys I plan to move our OEM from 9i to 10g in a planned manner. I want to know, as a first step, if the OEM itself can stay at 9i and the repository database can be moved to 10g. Second: if I move OEM & repository to 10g, can I monitor 9i & 8i DBs? T
-
Ipod serving to backup files: not working
Recently my computer was having issues so I used the system restore tool to bring it back to the state it was when I bought it. Before doing this however, I put some of my documents/games/folders on my ipod as a backup as I didnt have another hard dr
-
Soooo Frustrated setting my iPad - what a horrible experience this has been
This is my first and probably last Apple experience. I got an iPad. I went to set it up. Guess what, first you have to download iTunes. Are those instructions in the iPad. NO. After downloading the iTunes app, then I have to register then I have HAVE