Setting Banner Certralised (Through NIS Server)

Hi
I have to set banner for both telnet and ftp . is it possible to do it centralise i mean through NIS server.
I have one NIS server (Sun server) and 200 other servers(Sun Servers).
Actually it is very difficult for me to set banner on all the 200 sun servers
Thanks in Advance
RK

I am not sure if these links will help, but there is a problem with the lp command in Leopard:
http://discussions.apple.com/thread.jspa?messageID=7128688&#7128688
http://discussions.apple.com/thread.jspa?messageID=6919636&#6919636

Similar Messages

Set up email through exchange server - Contacts are now deleted.

I connected my phone, 3.1.3 to my work exchange server for email and outlook. Of course after doing so, I have now lost all my contacts. How can I retrieve them?

That's what happens when you share the same iCloud account. First, migrate his phone to a different iCloud account using a different ID (you can continue to share the same ID for other services such as iTunes if you want). To do this, on his phone save any photo stream photos that he wants to keep to his camera roll (unless already there) by opening your my photo stream album, tapping Select, tapping the photos, tap the share icon (box with upward facing arrow), then tapping Save to Camera Roll. If he are syncing notes with iCloud that he wants to keep, you'll need to open each of your notes and email them to him so he can later copy and paste the text into new notes created in his new account. Then go to Settings>iCloud, tap Delete Account (which only deletes it from this device, not from iCloud; this won't effect your phone), provide the password to turn off Find My iPhone and choose Keep on My iPhone when prompted. Then sign back in with a different Apple ID to create his new account and choose Merge to upload the data. After doing this, he can go to icloud.com and safely delete your data from his new account.
Then, if your contacts were on your phone when you last backed it up to iCloud, you can restore them by following Winston Churchill's user tip here: https://discussions.apple.com/docs/DOC-4841. This involves turning off your wifi after your phone restarts during the restore process, then saving the contacts on your phone and deleting them from iCloud prior to turning your wifi back on and allowing the restore process to finish. You can turn off your wifi either by pulling the cord out of the WAN port in your wifi router, or by simply unplugging it.

Which is better: Polling DataSockets(UpdatedData) or Polling through VI Server

I need a C++ program to monitor controls in a local instance of LabView. From my research, I have found two ways:
-I can use CWDataSocket ActiveX controls and poll the UpdatedData property for each control.
-Or I can Use the VI Server ActiveX Control and poll using GetControlValue().
I am wondering which is the better way. Is there a performance difference?
Any thoughts on this matter would be greatly appreciated.
-Clayton T.
P.S. I like that polling through VI Server decouples the VI control from my polling program. (Using datasockets, you have to explicitly setup each control to a datasocket. With VI Server, you just use the already available control name.)

"C++" is not the most appealing topic for many LV types.
The only reason I respond is because I used to do C ( but "I got better"). If you are willing to address the heavy hitters on this subject, try post to Info-LabVIEW. You may get a reply from Rolf, Greg, Jean-Pierre, or Uwe with this question.
I will keep my eyes open for your post.
In the event you do not know how to use info-LabVIEW, I have included the contents of a recent message that will get you started.
Ben
Quote:
This is the weekly admin reminder for readers of the Info-LabVIEW mailing
list and mail digest. (19oct01)
o Administrative issues such as SUBSCRIPTION and DELETION REQUESTS
MUST be addressed to the admin address, which is
mil>.
o To post to the list, mail to . DO NOT
send subscription and deletion requests to .
o This is a user list, run by and for LabVIEW users. If you have a
commercially available item to announce, please make the announcement
brief.
o It is not, ever, acceptable to post "virus warnings" to this list. For
any reason.
A set of Frequently Asked Questions (FAQs) for LabVIEW are available from
our web server at .
Tom Coradeschi, Info-LabVIEW List Maintainer
http://www.info-labview.org/
Un-quote
>
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

How to run Exe file through Sql server agent job

Hello All
i have 2 servers
1.Application Server
2.Database server
Application server has a .exe file so i wanted to run this exe file through SQL server agent job from database server.
What is the process for run this Exe file
Can you plz suggest me step by step process
Kamal

While i'm trying to implement this below method
Step1 : Right Click SQL Server Agent. Select New -> Job. This will open a wizard to schedule a new
job.
Step2 : Select Steps from options given on the left side of wizard. This is the main place to set your
exe\program as a running step. Give some name to this step, Select Operating System (cmdexec) for the Type and give the full path of exe in Text box for Command.
ex:\\10.11.00.98(your application serverIP)\ch.exe
Thanks vanchan-Please
mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers
I got this below error
Message
Executed as user:NJROSJ345\SYSTEM. The process could not be created for step1 of job
(Reason:Access is Denied)The step failed.
But i have sys admin rights on the both the servers
Kamal

Transaction log backup through SQL Server Management studio

Dear All,
I need to configure transaction log backup through SQL server management studio.
It is already being configured for our PRO server(not by me) and now I want to configure it for DEV server.
In PRO I am taking it through(SID/right click/task/backup)
Then under backup type only full and differential option is coming for DEV.
Whereas for PRO all three(full/differential/transaction log) is coming.
Please suggest how to do it for DEV.
helpful suggestion will be duly rewarded.
Regards,
Ashutosh

Hi,
Just go to the database you want
right click then properties then options
then set recovery model to full.
Hope this helps .
Regards,
Vamshi.

Sharing /usr/local and NIS server and client

I have two sun v880 with solaris 9 one is nis server and other nis client . The nis master sharing /usr/local with nis client. I need that one sun will be backup from other, if one stop working other continuos. What is que best practice for to do this, stop de nis service and copy /usr/local of one to other? Change nis client to nis slave? I don't have experience with solaris.

Do you only have 2 machines total?
You discuss two separate services: NIS and filesharing.
For NIS, all that is required is that you set up a slave. The slave continues to serve data (but not update it) while the master is down.
Sharing /usr/local is different. If it's just these 2 machines, instead of NFS I might set up rsync to copy the data over periodically.
Darren

Setting heap size through oracleAS 10.1.3 enterprise manager

Hi All,
Can any body pls tell me how we can set java heap size through oracleAS 10.1.3 enterprise manager
Best Regards
Girish Tandel

hi...
Yes, we can set the heap size in opmn.xml file in java-options.... But this is not the good practice to mannualy edit server xml files. In OracleAS 10.1.2 we can set the same through OEM. But i am not able to set using oem in oracleas 10.1.3
Best Regards
Girish

Help on printing through Output Server

It seems that when I print from test presentment to PDF or to the local printer through my Output Designer, I get two pages printing out which is correct. When I compile and run the .dat file through Adobe Central server, I am having the same .dat file print out 5 pages with blanks on the second and 4rth page. I have the job setup with two tasks called PGCNTGET and PGCNTSET. I would assume if my test presentment to PDF and local printer are printing correctly, it should print correctly through the server. I did remove the PGCNTGET and PGCNTSET tasks from the job and only used JFMERGe and in that scenario it does print correctly but of course without page numbering. Can you please suggest on how to debug this in Central since I am not as familiar with Central Server.

I've never used the PGCNT agents but debugging with Central requires that you set the "verbosity" for the agent(s) to
i trace
mode. This can be done using
b Central Control
on the server - which you may not have access to,
b or
it can be specified as an option for the task. If the task is defined in the job management database to include the
b @OtherJobTokens
parameter then it can be done using the
b ^job
line in the .dat file. For the print agent (JFMERGE) it is done with the
b -v
option (-v0 sets trace mode). If it is done using Central Control, then verbosity for the Print Agent would be set to
b -10
(don't forget to set it back to the current setting). The agent will then put all of its trace messages in the log file (usually jfserver.log) and you will need to get that file from the server (it is plain text). Note that there are some bogus messages and others are difficult to understand but it might point you in the right direction.

Accessing WS Service through proxy server

Working with WLS 8.1.4 i cannot access remote service through proxy server.
I have setted up everithing needed and more:
http.proxyHost=HOST
http.proxyPort=8080
http.proxyUser=WIN_DOMAIN\USERNAME
http.proxyPassword=PASSWORD
http.agent="Microsoft Internet Explorer 5.0" weblogic.net.proxyAuthenticatorClassName=MyProxyAuthenticator
weblogic.webservice.transport.http.proxy.host=HOST
weblogic.webservice.transport.http.proxy.port=8080
weblogic.webservice.client.proxyusername=WIN_DOMAIN\USERNAME
weblogic.webservice.client.proxypassword=PASSWORD
weblogic.webservice.verbose=true
weblogic.webservice.binding.verbose=true
weblogic.webservice.transport.http.full-url=true
The strangest thing is that apparently no MyProxyAuthenticator is instantiated for I cannot see a System.out.print(message) I wrote its init() method.
Please help ... thanks in advance.

I am having the same problem. My client has the exact same properties as the previous poster:
// Standard JDK Properties
System.setProperty("http.proxyHost", "proxy-cache.xxxxx.xxx");
System.setProperty("http.proxyPort", "9119");
System.setProperty("http.proxyUser", "username");
System.setProperty("http.proxyPassword", "password");
System.setProperty("http.agent", "Microsoft Internet Explorer 5.0");
// Specific Weblogic properties
System.setProperty("weblogic.net.proxyAuthenticatorClassName", "com.bcbsmn.webservices.authentication.ProxyAuthenticatorImpl");
System.setProperty("weblogic.webservice.transport.http.proxy.host", "proxy-cache.xxxxx.xxx);
System.setProperty("weblogic.webservice.transport.http.proxy.port", "9119");
And here is part the response I get from the proxy server:
[java] <BODY>
[java] <H1>ERROR</H1>
[java] <H2>Cache Access Denied</H2>
[java] <HR noshade size="1px">
[java] <P>
[java] While trying to retrieve the URL:
[java] <A HREF="......">http://................
ITestPricer</A>
[java] <P>
[java] The following error was encountered:
[java] <UL>
[java] <LI>
[java] <STRONG>
[java] Cache Access Denied.
[java] </STRONG>
[java] </UL>
[java] </P>
[java] <P>Sorry, you are not currently allowed to request:
[java] <PRE> http://...............</PRE>
[java] from this cache until you have authenticated yourself.
[java] </P>
...and my authentication impl is never called according to my println's. I tried adding the proxyAuthenticatorClassName property to the command line as a JVM arg with no luck. Please help if you can, thanks.
Matt Dowell
Blue Cross Blue Shield

Best way to connect mac clients through Lion Server to AD?

Ok, so here's what we are trying to set up for our school network. We currently have a 2003 server system hosting our PCs.
Authentication - through 2003 server AD
When client logs in:
Mac Client -------sends info to --------> Lion Server ----passed data through to-----> 2003 Server
2003 Server -----responds with authentication----> Lion Server ---applies profile management to client------> Mac Client
My thought is that Lion Server needs to connect to the 2003 server via the active directory setup in Users and Groups, but the clients should be connecting to the Lion server via LDAP3.
We can authenticate to the AD server directly from the clients or from the server, no issues there. Yet putting the Lion Server in "attached to another server" mode in Server Admin Tools doesn't Kerberize, even after giving proper permissions to the server via AD. I'm assuming that Kerberization needs to happen in order for Lion server to pass ther login data from the mac client to the 2003 server and vice versa, right?
Also, we would like to have the users' 2003 network user folders on the desktop automatically, or preferrably what they access when they go to Home. I noticed some options in Profile Manager as well as Workgroup Manager to make this happen. I assume that once the data between the 3 is working proerly, this will be close to a no-brainer.
So, advice is much appreciated here, first time setting up this type of hybrid system. Thanks!

I appreciate all your help. I really do.
This is basically what I needed to know - You said,
"The audio out on a TV will source whatever input is associated with the current screen."
With my current macmini to TV setup - I have to have a separate audio line (apart from the dvi cable for video ) to the TV. I was not sure if that macmini audio line to the TV would transfer to the receiver. If it did not then I assumed (since the macmini only has one audio out line that I would have to split that audio line - one to the TV and one to the receiver ). That was my thinking anyway, but if whatever is on the screen will transport to the receiver then I should have no problem.
Thank you again for helping me think through this.
Pete

Adding Pix device public interface through Proxy server into CSM Fails

Hi
I am trying to add a device into CSM. The device is only reachable through proxy server. If i try to add the device, the connectivity test fails" unable to communicate with device". If i debug on the PIX i see no connection attemps. If imake a https connection from the Explorer from the windows server running CSM i get connected. I have set the proxy settings under Server Administration. I can update packages from CCO through the proxy. Is there somewhere else to tell CSM to run through proxy ?

Hello,
maybe your problem has to do something with loading SLPDA.NLM. If you
cannot get to open Autoexec.ncf then go back to DOS-Mode, rename this
file in C:\nwserver-directory and start again. i have seenthis behaviour
on servers loading SLPDA with no network-communication and they stop
loading at WPSD.NLM. Try to load SLPD.NLM manually when the server is
up. After that shift the line in Autoexec.ncf where you want to load
Slpda.NLM to the end of the file and boot the server again to see what
happens.
Good luck
Burkhard Wiegand
Netware Admin
Debeka-Versicherungen
D-56068 Koblenz

Email does not go through because server did not reply

Very recently, I get an error message "email did not go through because server did not reply" when trying to share a photo from iPhoto to email...regular Mail works very well. What's going on here?

Have you changed anything with your email recently like to two step validation or your password or???
in the iPhoto preferences ==> accounts delete your e-mail account and reenter it
OR
IMHO the better solution is to set Apple mail as the email client in the iPhoto preferences
LN

Netscape Problem on a NIS+ Server

Hi,
After setting up my NIS+ server 'MegaServer' I tried to run Netscape, and this is the message that I get:
Xlib: connection to ":0.0" refused by server
Xlib: Client id not authorized to connect to Server
Error: Can't open display :0.0
Now I have included the path to Netscape in the .profile file, the same message still persists. What should I do?

Try one of the following:
http://blogs.technet.com/b/askperf/archive/2009/04/17/terminal-services-and-graphically-in tensive-applications.aspx
http://helpx.adobe.com/acrobat/kb/slow-display-performance-terminal-server.html
http://blogs.adobe.com/dmcmahon/2011/01/11/acrobatreader-slow-display-performance-in-termi nal-server-or-citrix-environments/
http://blogs.citrix.com/2011/12/06/optimization-guide-for-windows-server-2008r2-with-xenap p-66-5-–-available-now/

Sent email through Gmail server.

I have Coldfusion 9 and I wonder if it is possible to send emails you have in the queue every second.
Currently we send mail through Gmail server and you do not need classified as Coldfusion send spam emails with an interval of one second each.
Anyone can help me?

I will look at the settings in her gmail in a web browser. I assumed there was really only two way for one server to get emails from another.
1. Charter is set to foward all emails to Gmail and keep the email on Charter's serve too. (not what is happening here)
2. Gmail somehow reachs into Charter's server and downloads the mail to gmail. I suppose there would be options to leave the email on Charter's server. (But that doesn't explain why Charter's server doesn't keep the original email).
But instead what is happening here seems to be that gmail reachs into Charter server, hijacks the email and somehow deposits the hijacked mail back to Charter after it performs gmails rules.
Never having used the "unified" Andoid option (and I assume that was how it was done) I would have assumed the unified system would poll from mail from all accounts and put it into one box. But that doesn't seem to be happening here. But maybe they didn't do it from the phone but from the gmail web instead changing Charter's mail to gmail by taking the mail before Charter puts it on the server?
Here is what I want for her. Her phone would poll Charter and Gmail and put all emails in a common folder on the phone without Gmail modifiying the email sent to the Charter's address. Of course if the email was being put on the Gmail server then I would expect gmail to apply their own rules... but not to the email left on the Charter account.
Anyway I thank you for your response and will check her Gmail web setup.
BTW I'm in over my head here. :-)

Cannot access server in HQ through proxy server

Hi Experts,
We have a TMG 2010 installed and clients are accessing Internet through it.
And now there is an access problem to the destinatined server in HQ in another country, and it was fine to reach the destinated server before the servere changed its IP.
When trying to accesss the destinated server with new IP, the TMG log and report shows the connection status with
12030: The connection with the server was terminated abnoramlly.
While there is another guest segment that allows Internet access without proxy server, and they are able to access the server with no problem at all.
When I captured packets using Wireshark from the pc and found that the connection was actually from the pc to proxy server with the following result:
from PC to Proxy server
CONNECT xxx.xxx.com:443 HTTP/1.0
from Proxy server to PC
HTTP/1.1 502 Proxy Error (The connection with the server was terminated abnormally) (text/html)
Would there be a configuration problem inside TMG?
When i include the domain in https inspection exemption list, is that means client would be able to reach ther destination without being inspected?
Then how about the incoming connection? Is there any rules which will restrict HTTPS inbound?
Apart from above problem, clients also not able access some of https website such as banking with CA's, and no problem using guest segment (not through proxy server).
Thanks in advance
Ben

Hi,
>>And now there is an access problem to the destinatined server in HQ in another country, and it was fine to reach the destinated server before the servere changed its IP.
Have you tried to re-create the rule to access the destinatined server after it changed the IP?
>>When i include the domain in https inspection exemption list, is that means client would be able to reach ther destination without being inspected?
When a site is added to the HTTPS inspection exclusion list, Forefront TMG does not check the site’s certificate for expiration or revocation. However, name mismatch and trust are always checked, unless the “No Validation” mark is set.
Reference:Troubleshooting HTTPS inspection
Best Regards,
Joyce
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Setting Banner Certralised (Through NIS Server)

Similar Messages

Maybe you are looking for