Setting Bridge CS5 to run Photoshop x32 for Tools

How can I set Bridge CS5 to call on the 32 bit version of Photoshop CS5 for commands from the Tools menu instead of the 64 bit version? I have it set to open files into the 32 bit version, this is just for the scripted actions in the Tools menu.

I have a question about this opening from bridge/ photoshop thing.
So let me get this straight, if I'm in bridge and I select an image it will open ACR in 32 bit mode. If that's true I can understand that. Here's the problem, how do I open ACR from photoshop with a raw image I have selected from photoshop, type in the whole file name and path by hand? Do I open bridge from photoshop and then select my image and that opens ACR in 64 bit method?
I just don't understand the method or why it makes any real difference.
John Passaneau

Similar Messages

Need help w/ setting up ports to run a server for America's Army

Need help w/ setting up ports to run a server for America's Army. I read wat u need to change the ports but i dont understand wat to put. here is wat the site says
Q: How do I run my own server?
A: Quick and dirty server info:
1. Edit RunServer.bat to change the map.
2. Run RunServer.bat
Or:
server.exe LAN MAPNAME.aao (Host a LAN game)
server.exe global MAPNAME.aao (Host a Public game)
Also: When you create a server setup and want to allow other users to join your server, you need make sure the following ports are open for outgoing and incoming traffic in your firewall: 1716 (UDP), 1717 (UDP), 20025-20045 (TCP), and 20047 (TCP). Failure to open these ports will prevent the server from accepting connections from other players or prevent other players from being able to see your server online.
There are several settings that also need to be defined in your server configuration INI file (in the Windows version, these files are located in “My Documents\America’s Army Server Settings\{settings file name}.ini”).
[Engine.GameEngine]
ServerActors=Andromeda.AndromedaMBS
[Andromeda.Andromeda]
GameServerIp=
Make sure that you set the actual IP address of the America’s Army Server under GameServerIp= (for example, “GameServerIp=000.000.000.000”). The supplied address must be your actual internet IP address, if this is left blank or you supply the IP address for your internal network (such as 192.168.0.x), your server will not be able to accept connections from the internet.
If your server.ini file contains the setting shown below, please change the QueryPort setting to 20025. This setting can also be removed, as the default setting is port 20025.
[Andromeda.AndromedaMBS]
QueryPort=20025
Punkbuster user fix correction.
If [Engine.GameEngine] block has been changed to read as below:
[Engine.GameEngine]
ServerActors=IPDrv.AndromedaMBS
Please add the following block to your INI file:
[IpDrv.AndromedaMBS]
QueryPort=20025
(Last Updated: 2006-04-20)

Your images are not stored in the catalog. They are stored in folders on your computer. If you imported images that were already on your computer using the "Add" Option they are still in that same folder. If you imported images from your camera then they are in the folders that you specified when you imported. The catalog points to those images wherever they are located, and records all of the adjustments that you make to the image. When you send an image to Photoshop for further editing and save that image in Photoshop, it is normally saved back in the same folder as the original image.
Images are not "saved" in Lightroom. The basic default workflow in Lightroom is to store all of the adjustments in the catalog, leaving the original image completely unmodified. The catalog becomes the central controlling mechanism. It is a database that contains pointers to where the images are located and a record of all adjustments made to those images using Lightroom. Properly managed, you only have those original master files and secondary files for the ones that you have sent to Photoshop for further adjustment. When you want to provide a copy for someone else, you use the export dialogue for that purpose. I often export JPEG images to share with others or to post on the web. After I have usedthe JPEG for its intended purpose I delete it.

Question: how can I tell Bridge I want to set PS CS5 as the default program for opening .psd files

How do I change a specific file type association in Bridge CS5, namely the .psd file type? I had installed Photoshop CS6, but am unable to use it due to extreme slowness (another problem, not for this question). I have reverted to using Photoshop CS5 and Bridge CS5.
Now when I double-click on a .psd file in Bridge CS5 to open it (or right-click on the .psd file) , the file opens up in the glacially slow CS6. I went to edt>preferences>file type associations to change the association to Photoshop CS5, but .psd is not listed as a file type (.jpg and .dng and a host of other file types are listed). How can I change the association if I cannot find the file type? (BTW: I have changed the file type association in Windows Explorer; I am running Windows XP.) I know I can open PS CS5 manually and scroll to the image I want to open but, to my mind, that defeats one of the main purposes of Bridge.
Any advice you can offer would be gratefully received.
Thank you.
Heather

Adobe Bridge >> Preferences >> File Associations
This is mac screenshot, but should be in same place.
Win 7 works very goo on my home computer, much better security. One problem myslef inlcuded have had is files permissisons, especially on external drives, and you have to dig to china in the menus to fix it, or else you can't save over the same file name. So if you plan on upgrading do it on a day you can troublshoot to fix that annoyance, though at this point might be good to wait for win8.

Adobe bridge cs5 64bit - HELP: photoshop plug-ins doesnt work

Hi to all this is my 1st post since its my 1st time to have a problem with adobe. My problem is that i selected a number of images and tried a batch image process thru Tools > photoshop > image processor. After clicking nothing happens. I also tried the other plug ins like HDR, Batch etc but nothing seems to work. I went to the directory folder and all of the plug ins are intact and in the " plug-ins " folder. I also updated everything just now but still no luck. What happening here,please help me out. Thanks
Dex

"Reveal my scripts folder" is to reveal the user's folder for costom scripts, not public scripts. If you have no custom scripts like you developed yourself and want to load it into Bridge, then the folder is empty. It's normal.
The issue seems not plugin but scripts installed by Photoshop not working. Could you please let me know the version of Photoshop and Bridge:
Photoshop: Help>System Info
Bridge: Help>About Bridge
You mentioned you updated it 1st time, you mean update PS or Bridge? Could you please send me via private message the install log of update? You can find it here:
Windows: C:\Program Files\Common Files\Adobe\Installers\Adobe Bridge CS5 4.0.*
Windows 64-bit: C:\Program Files (x86)\Common Files\Adobe\Installers\Adobe Bridge CS5 4.0.*
Thanks,
Bridge QE
Fran

Uninstall Bridge CS5.1 or Photoshop CS5 w Bridge in Windows

How can I uninstall Bridge CS5.1? I have tried to uninstall it everyway I know and all I get are error messanges stating that I cannot uninstall bridge or Photoshop CS5 because I get the error message that the file is open in another application and so cannot be deleted! I closed everything and still cannot delete or uninstall either program. I have tried renaming it etc.... I have even tried using administrator override and still cannot delete it. Any help would be appreciated.

Trevor.Dennis wrote:
…In fact, if CS6 is an upgrade, you may need to keep CS5 activated on the same system in order for the upgrade to work…
That is absolutely NOT the case. All Adobe upgrades are FULL INSTALLERS. They will always install the full version without regard to any previous version(s) you may or may not have on your disk. They do not build on older components, they install the entire new version from scratch. They leave older versions completely untouched.
The only thing they do in regards to an older version—whether that older version is activated or not—is to read the older serial number. If they find no prior versions on disk, they will simply prompt you for the old serial number as well as the nwew one.

I have just downloaded camera Raw 8.8 to my computer that runs Photoshop CS6 for my Canon 7D Mark II. CR2 files appear as Icons instead of thumbnails. Does anyone know a fix

Is there a way for CR2 files that are downloaded to Bridge running CS6 to appear as thumbnails rather than Icons in Bridge

rhobbs713 wrote:
Is there a way for CR2 files that are downloaded to Bridge…
You don't download anything "into Bridge". Bridge is a just a File Browser, you put your image files wherever you want and you point Bridge to whatever folder you put your raw CR2s in.

Bridge cs5 won't display controls for output for pdf or web

hi, selected some images to create a contact sheet, but when i clicked on "output" nothing appeared in the window, as if this module didn't launch. any suggestions for a reset? i'm at a college, so it will be a pain if i have to reistall software (IT guy has to do it). nothing in bridge's preferences refer to the output controls. any help appreciated.
mark

nothing in bridge's preferences refer to the output controls. any help
appreciated.
In general you don't need to reinstall at first trouble. A restart holding
down option key and from the pop up menu resets all preferences to default
settings including the default workspaces.
But could you be a little more specific about your workflow, f.i. on what
output you are clicking for the module (the default workspace, the icon or
menu view-workspace-output) And does that window look as output containing
at least the content panel, preview panel and output panel with all its
settings (document-lay out-overlays-header etc).
Maybe you can provide a screenshot of what you are seeing when in output?

How can I set the CS5 to Intuos Pro Large for changing brush size and opacity and others?

How can I set together to my PS5 or Ps6 in order to change brush size and opacity at the Intuos Pro Large?
Nachricht geändert durch Orhan Tarman

The MTU setting on the interface is the layer 3 packet size. In this case, the MTU is set to 1500, but the largest frame size transmitted on the interface (including layer 2 headers) is 1516. It sounds like you are experiencing another problem at the LES.

Bridge CS5: Funktion Werkzeuge Photoshop Bildverarbeitung fehlt

In Bridge CS 5 fehlt eine wichtige Funktion, die CS 3 noch hatte: Unter >Werkzeuge>Photpshop>Bildverarbeitung konnte man bequem Fotos neu skalieren etc. (z. B. RAW files rasch in JPEG`s mit Beamerauflösung) transformieren.
Die Funktion habe ich oft benutzt, kennt jemand eine Lösung? Oder muss man CS 3 wieder installieren???

Don't think anyone speaks German.
http://forums.adobe.com/community/international_forums/deutsche

JPG and TIFF colors in Bridge CS5 way off, but fine in Photoshop

Just started happening, but not sure if it was after updating to Bridge 4.0.3 or Camera RAW 6.2. The colors for RAW and PSD files are fine in Bridge, but all JPGs and TIFFs colors are blown out and way off. Opening the JPG or TIFF in Photoshop looks fine though. Anyone else having this issue, or know how to fix it?
Update: If I set the "Develop Settings" in Bridge CS5 to "Camera Raw Defaults" for the JPGs/TIFFs that are displaying improperly, the colors and tones go back to normal, but if I "Clear Settings" everything turns to crap again.

PLEASE help save my sanity and my reputation! --I have spent the last five days exhausting every possible solution to this debilitating issue. I have spent countless hours perusing the web for a solution, spent 4 hours yesterday with Adobe customer support and yet, there is no solution to be found. My issue is that the color (in every file format NEF, JPEG, PSD) completely changes color and desaturates in every one of the adobe products: Photoshop CS5, Camera RAW 6.2, Lightroom 3.2. -
Everything was working fine, and then out of no where my productivity has come to a crashing halt. This is the steps I have taken to this point:
-Uninstalling/re-installing all of the software
-Purging anything that can be purged.
-Changing color profiles
-Resetting defaults
-Resetting preferences
-Installing updated drivers for monitor, video cards
-rollling back drivers for monitor, video cards
-monitor recalibration
**and finally, today...I set the monitor up on another computer, OS windows xp, and to my complete surprise, the issue persists even on another pc with completely different hardware.
-I am at my wits end with this. I have clients ringing my phone off the hook. This is crazy!
-I have sent out for another monitor as a last ditch effort to see if something is wrong with the monitor.
PLEASE, if anyone has a solution please let me know. Apparently, the folks at Adobe are just as perplexed by these issues as we are, as I have found numerous posts on forums throughout the Internet with this same issue---and yet none of the post every found a solution.
Primary System
Windows7 64-bit
Nvidia fx 580 video card
Dell U2410 Ultra Sharp Monitor
Abobe CS5 Photoshop -64-bit
Lightroom 3.2
Camera Raw 6.2
Secondary
Windows XP
Nvidia GeForce 8400gs
Same software, just in a 32-bit

Photoshop CS5 and Bridge CS5

I recently purchased a new PC and transferred Photoshop CS5 from my old PC to the new PC via PCmover Professional and a Laplink USB cable attached to both PC's. The transfer appeared to work without a hitch until I tried to open Bridge CS5 from within Photoshop CS5 without success. I then opened Bridge separately which worked fine but I cannot open any of my photos in Bridge to edit them. What can I do to fix this problem?

I am not a PC expert, but I think most users would highly recommend a clean install rather than a copied one.
CS5 installs in numerous directories on the C drive and it may not get all the directories copied.
I would uninstall and install from the disk or the copy you hopefully saved of the download.
Be sure to deactivate you old copy also.

Photo Downloader Adobe Bridge CS5

Hi
I wonder how i can save the import settings in photo downloader to always have same settings when extracting images?
It always adjust it self back to default and i need to find my location again. Any suggestins?
Also. When working in CS5, and i want to apply e.g sharpening i go to filters and the slide appears, moving down to sharpen the new "window" appears on the left side and not the right.
What button have a touch???
Please help
Thanks!
Wbr
Simon

There was a bug in CS5.1 is this the version you are using? If so here is a solution from a past thread.
If you want to maintain the Downloader dialog preferences (advanced dialog, metadata, etc.) the answer is in the thread referenced previously, but from what I've found, here's a little clarification.
N.B. This is for Windows 7 x64 (Home premium, but probably the same for Pro/Ultimate). This may work for macs too (change directory of course)
1) Create a new folder called "Bridge CS5" (leave the Bridge CS5.1 folder at least for now. you may want to redirect your cache)
EX: C:\Users\[Your USER NAME HERE]\AppData\Roaming\Adobe\Bridge CS5
2) Copy the "APDPreferences.xml" file - if you have one - from the Bridge CS5.1 folder to the new "Bridge CS5" folder you just created (should be the only required file in the folder). It's OK to leave the folder empty too.
3) Make your changes to the downloader dialog, save a file or two, exit normally.
When you open it again, it should return to the defaults you just set up.

Replace Bridge CS5 with Bridge CS6?

Hi All (my first post, whoop!),
Having been using Photoshop CS5 with Bridge CS5 happily for sometime, we've now purchased InDesign CS6 which has installed Bridge CS6.
Can I uninstall the now redundant Bridge CS5 without upsetting Photoshop?
I have searched this forum but couldn't find an answer (maybe I missed a thread somewhere).
Thanks for your help,
Matt
p.s. We use Macs.

No, you cannot uninstall Bridge separately. It's simply not possible for technical reasons. Bridge CS6 can use PS CS5, though, and conversely, PS will happily use a newer version of Bridge without much ado, give or take a few specific cases. Check the file associations in Bridge and your system in general.
Mylenium

CS6 64 bit (for windows) installation keeps telling me to shut down Bridge CS5 which isn't running.

I've checked the Windows 7 Task Manager and Bridge CS5 does not appear. Can someone help with what I'm to do so I can finish the install?

This error occurs when Adobe Bridge is configured to start at login, so it is running in the background.
Please refer the kb article for resolution:
http://helpx.adobe.com/creative-suite/kb/error-installation-cannot-continue-bridge.html
Regards,
Ashutosh

I have Adobe Photoshop CS4 and have just upgraded my Mac operating system to Yosemite with the newest version of Java 2014 running. When I try to access Photoshop from Bridge or directly open it asks for a Legacy Version of Java 6. As I am a pensioner I c

I have Adobe Photoshop CS4 and have just upgraded my Mac operating system to Yosemite with the newest version of Java 2014 running. When I try to access Photoshop from Bridge or directly open it asks for a Legacy Version of Java 6. As I am a pensioner I cannot afford an upgrade does anyone know of a work-around for this problem?

Hi Daddyfred,
CS4 Photoshop has not been tested on Yosemite. But still you can try the Java 6 update using the below link.
http://www.oracle.com/technetwork/java/javase/downloads/java-archive-downloads-javase6-419 409.html
Thank you for posting on Adobe Forums.

Setting Bridge CS5 to run Photoshop x32 for Tools

Similar Messages

Maybe you are looking for