Setting camera attributes with the PCI-1405
I have the PCI-1405 Imaq card. I was wondering how I set camera attributes like gain and exposure time. Every time I try to use the set camera attribute VI I get an error message saying the attribute is not valid.
khsay--
Installing the driver will allow the framegrabber (1405) to communicate with the computer. I want to verify that you are using Measurement and Automation Explorer (MAX) to test the sanp/grab features of your camera. This will allow you to directly interact with the hardware.
If you are, and this is where you are getting the extract image error. First double-check that you know what kind of communication standard the camera uses (for instance, CCIR or RS170) and make sure that this is selected in MAX.
The camera might not be using a known standard, in which case you will need a camera file that tells the computer and framegrabber how to interpret the camera's information and signal. You can look in MAX and see if the camera is listed, if it is the camera file is If not, you can try going to www.ni.com/camera and see if you can get a camera file there. If not you will need to try contacting the manufacturer to see if they have one, and if not you will need to create one using the camera file generator from the ni.com/camera.
Just let us know if this information helped to solve the issue and if not reply back so that we can help. Also, in the future if you have a new issue you might consider posting in a new thread.
Regards,
John H.
Applications Engineer
National Instruments
Similar Messages
-
Missing camera attributes with the NI IMAQ for IEEE-1394 driver
I'm using an ORCA-AG and the IEEE-1394 driver. When i look at the camera attributes (either with MAX or the attribtue inquiry vi.) i can see just some of them (brightness, shutter,...). I have tried the ORCA-ER, which has the same attributes, but uses the PCI-1424 framegrabber. Using this camera i can see and modify more attributes (light mode,...). How can i modify them with the IEEE 1394 driver?
I also have another problem. When i use 1x1 binning the image must be 8bits, if is use 16bits, max cannot aquire the image (timeout error). Does anyone have the same problem?
Thank you very much.Some non-standard attributes can be modified by directly reading and writing to the memory of the camera. Your camera manual probably has memory locations listed for the different attributes. You can get to these using the low level firewire routines. I have done it once or twice.
Bruce
Bruce Ammons
Ammons Engineering -
My wife and I each have an apple computer and an iPhone. Setting them up with the iCloud put us on the same account. I take a lot of photos on job sites and she takes her own photos we have to scan though each others photos to find our own. How do I separate the accounts without one of us losing our own stuff?
Decide which device will be changing accounts. On that device, if you have any photos in photo stream that are not in your camera roll that you want to keep on the device, save them to the camera roll by opening the photo stream album in the thumbnail view, tapping Edit, then tap all the photos you want to save, tap Share and tap Save to Camera Roll.
Once this is done, go to Settings>iCloud, scroll to the bottom and tap Delete Account. (This will only delete the account from this phone, not from iCloud. The device(s) that will be keeping the account will not be effected by this.) When prompted about what to do with the iCloud data, be sure to select Keep On My iDevice. Next, set up a new iCloud account using a different Apple ID (if you don't have one, tap Get a Free Apple ID at the bottom). Then turn iCloud data syncing back to On, and when prompted about merging with iCloud, choose Merge. This will upload the data to the new account.
Finally, to delete any data that you don't want in each account (such as deleting your wife's data from your account, and vice versa) you will have to go to icloud.com on your computer and sign into each iCloud account separately and manually delete it. -
I was talking outside on my iPhone 5 in a fairly humid environment (The Pilbara in January, 2014) then when the call was finished I hung up (as I was walking back inside to the air-conditioning) this white vertical line appeared in the centre of the screen and wouldn't go away. I couldn't use it NOR could I accept calls. (I called my number from my other phone). I eventually managed to turn it off after removing the protective casing (Otter Box) and then it came up with the white cord / iTunes screen........I left it for a while...it turned back on BUT is still had a flickering screen.......I re-charged it and I have backed it up this morning (at work) on iTunes and it seems to be working 'fine.' All I can say is 'DO NOT GET RID OF YOUR SAMSUNG GALAXY PHONE IF YOU HAVE ONE!' I haven't had an OUNCE of trouble with it and have owned it for at least 3 years. The iPhone has been up and 'running' since the 6th of January, 2014. This happened on the 15th of January, 2014.
Plug your phone into the wall charger for at least 30 minutes...make sure you have a sim card in the phone...then:
Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.
Make sure you have no anti-virus software running or any firewalls...turn all of that stuff off. -
My XP machine is unable to load iTunes 10.5.1. It gets about halfway loaded then says it can't find Bonjour.msi. However, that file is on the computer. I tried loading the Bonjour.msi from another computer but it came up with the same message. I also tried to remove iTunes from the add/remove sector on Control Panel but it also refused for the same reason. Help, please.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
The missing apps could have been done by setting the Restrictions that can hid those apps. If the backup was made with those retrictions set the the Restrictions are also restored.
Thus, if you get it to work restore to factory settings/new iPod, not from backup
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
Can I import 2 sets of photos with the same file name numbers?
I've inadvertantly not had my camera set to "continuous" for file names and now have 2 memory cards with 2 different sets of images with the same file names.
Can I still import both into Lightroom 2 without problems?
What are the consequences?
Thanks
StuartYes. Of course, two files with the same name cannot be in the same folder. And don't forget to uncheck Don't import suspected duplicates during import.
Another thing is that's not a good idea for good asset management, because someday you'll make some mistake because of this ambiguity. Good DAM practices suggest renaming your files after or during import, so that each files has a unique name across your entire image archive. -
Good Afternoon Scripting Guys. I have a script that I have been working with pretty much all day today and just cant quite get it to play nice. Our objective is to search AD for specific users (say filtering them out with a username that starts with a "T")
and User account is "Enabled" then grab the last four digits of their phone number (phone number is set up as follows: (800) 123 456 ) then populate the IPPHONE attribute with the last four digits of their phone number. I have read a ton of online
blogs with users successfully making this happen but it appears that they are all using Quest (as the commands are all Get-qaduser and Set-qaduser). I need something that runs strictly in native Active Directory Module PowerShell on a Windows Server 2008r2
Domain Controller. I am also trying to keep it as simple as possible by using a Get command, then piping a Set command. I have saved the script into a .ps1 file with the logic as follows:
$SelUsers = Get-ADUser -filter {(SamAccountName -like "t*")} -Properties ipphone,telephonenumber -searchbase "OU=Test Users,OU=Temporary Org,OU=Test_Domain Users,DC=mydomain,DC=com" | where {($_.enabled -eq $True)}
foreach ($user in $SelUsers)
{$user.ipphone = $user.telephonenumber(4,$User.telephonenumber.length-4)
set-aduser -instance $user}
What is happening is kind of funny, but aggravating at the same time. When we run the script, it completes with no errors. When I pull up the properties of a user in the OU, the IP Phone field is populated with the number 8. If the User
account did not have a telephone number, the IP Phone field is populated with a -4. So, apparently, the script is somehow subtracting the "-4" from the number of all of the Telephone Number field's characters. Basically 12-4 is 8.
If there is no telephone number, then 0-4 is -4. I have run the Get-ADUser portion of the script independently so I know its getting the correct users. I also know it is populating the IPPHONE attribute but not with the last 4 digits of the telephone
number. Can you guys help out and maybe get this to work correctly? Also, can you add logic to it to the script to delete any value in the IPPHONE field first, then replace it with the last 4 digits of the telephone.
Any help would be GREATLY appreciated!!!!! Thanks Guys...
LeeFirst thing I would do is modify your filtering. This will remove the unneeded piping to the Where-Object cmdlet and also allow us to only return users who already have something in the telephoneNumber field. It is possible this could return all of your
users, but if you have service accounts, etc. that do not have a telephoneNumber then they will not be included in your results. It's just a little cleaner.
$SelUsers = Get-ADUser -filter {(SamAccountName -like 't*' -and Enabled -eq $True -and TelephoneNumber -like '*')}
I suspect you may have a made a mistake when you entered what your phone numbers looks like. I assume that you forgot a final digit. If this is correct, and you have a space in the phone number between the three digits and the final four then you can use
the split method to grab the last four digits.
Foreach ($User in $SelUsers) {
$Number = $User.telephoneNumber.split(' ')[-1]
Set-ADUser -Identity $User -Replace @{ipPhone=$Number}
There's no reason to delete what's in the field first because that's part of what the -Replace parameter will do anyway. This should help get you started! -
Replace User msRTCSIP-GroupingID attribute with the OU ObjectGUID
Hello!
I am trying to create a script that will replace the users msRTCSIP-GroupingID attribute with the OU ObjectGUID
Can anyone help with this
Get-ADUser -Filter * -SearchBase "OU=Test,OU=Tenants,DC=Mayernetworks,DC=COM"
$OUobjectGUID = get-ADOrganizationalUnit -filter * -searchbase "ou=test,ou=tenants,dc=mayernetworks,dc=com" | ft ObjectGUID
Set-ADUser $Accounts -Add @{"msRTCSIP-GroupingID"=$OUobjectGUID}
i'm getting the argument is null error
bradley WyattI dont think this is supported
The attribute msRTCSIP-GroupingID should
not be used in a commercial hosting environment and is not supported by Microsoft due
to the privacy and security risks when providing multi-tenancy in a hosting environment. The use of the attribute only simulates a grouping of users in logical partitions, and does not create a true partition in which the security and privacy of the tenants
can be tightly controlled.
Please remember, if you see a post that helped you please click ;Vote As Helpful" and if it answered your question please click "Mark As Answer" Regards Edwin Anthony Joseph -
is anyone else having trouble setting up messages with the new mountain lion software? I keep getting a notification that i cant sign in and it is saying, check network connection and try again, but i have full wifi bars, thanks, Justin
Install this to get X11 functionality back in 10.8
http://xquartz.macosforge.org/landing/
Worked great for me and others.
Jerry -
My iPad 4 does not show up on my TV screen when in AirPlay mirroring mode using WiFi. The iPad displays AirPlay set to TV with the Mirroring On (green).
My iPad IOS software is 8.2 and my Apple TV software is at 7.1. The TV displays the Apple Menu. The “Settings” does however displays the General menu allowing me to see:
Apple software: 7.1 (7003)
Apple TV: Model No. A1464, Part No. MD199B/A
Signal Strength shows 5 circles.
It does not display the iPad screen but when I use the BT Sport App I can hear the sound but there is no video. I have searched the internet for a solution to no avail. The problem first arose when the IOS was at 8.1+ but it worked correctly briefly when I updated to IOS 8.2. Can you help please?Welcome to the Apple Community.
Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Restart your router. (Also try removing it’s power cord for at least 30 seconds)
Restart your mobile device.
If you are still having problems, the following article(s) may help you.
Troubleshooting AirPlay
Troubleshooting Wi-Fi networks and connections
Recommended Wi-Fi settings
Wifi Diagnostic Software (for Mac users)
You may also find some help on this page, where I’ve collected some of the more unusual solutions to network issues.
When making adjustments to your network for better optimisation, you may find some of the points mentioned on this page helpful. -
We just got 2 iPad air today and Set up both with the same Apple ID, now I'm getting FaceTime and messages for my 12 yr. old. Do I have to set up a separate Apple ID for her to avoid this?
It's a trust issue. You can set them up so you don't receive each other's messages as long as you each have your own email address.
The trust issue is the fact that either of you can change the separation at any time via Settings by checking the appropriate (inappropriate?) email address.
To be absolutely sure you can never receive each other's messages will require two Apple IDs. -
I have an MacBook Pro 10.6, using disk utility I tried to verify my disk, but it came up with the message, please use your start up disk, I tried this, starting the computer up and pressing C, but it ejected the disk, the same thing happened while I running the computer. Is the hard drive damaged as laptop doesn't seem to recognize the start up disk ? If so, I presume I will have to put in a new one.
There haven't been any problems with the computer, apart from a sticky curser,I have run a permissions programme from disk utility, there were a lot of different ones, but it seem to be able to fix them.
Any comments or ideas ?
Thank you in anticipation.First backup your users files off the machine to a external storage drive (not TimeMachine!)
Most commonly used backup methods
Next to startup from the disk, have it inserted, hold c or option/alt (wired or built in keyboard) and then boot the computer and or select the disk when it appears and click the arrow.
Disk Utility is under the Utilities menu on the second screen.
Step by Step to fix your Mac
If you used the wrong 10.6 disk, it will spit it out or have issues, use the one that came with that machine or if it's defective, call Apple for a new one. -
"Removing email account from iPhoto"
How do I remove an email account from iPhoto on an iMac? I set it up with the incorrect password and can no longer send photos, please help!To follow Larry's advice, select your email account in the list of accounts and click the "-" button to remove the account:
-
HELLO, i wand do make an update " camera Raw" with the adobe installer - it was not possible - this was the massage -Photoshop Camera Raw 6.7-Update Installation fehlgeschlagen Fehlercode: U44M1P7
You need to buy PSE13. But you can continue with PSE9 if you download and install the free DNG converter to convert your CR2 files to the Adobe universal Raw format and the DNG files will work with yoir existing software(keep your originals as backups and for use in the camera manufactures software)
Windows download (.exe file) click here DNG Converter 8.8
Mac download (.dmg file) click here DNG Converter 8.8
You can convert a whole folder of raw images in one click. See this quick video tutorial:
You Tube click here for DNG Converter tutorial -
Just the other night my phone desided to reset itself, and when i went to restore it it came up with The iPhone iPhone could not be restored. an unknown error occurred (-1).
Please Help i need this phone....and i dont have the money to replace it!I havent jail broken it so its probable a hardware issue then.......well then.......
anyway thanks man
Cheers!
Maybe you are looking for
-
How do i put creative cloud on another computer
How do I put creative cloud on another computer
-
My 160gb ipod classic won't sync to itunes on a mac (I've tried everything)
Just got a 160gb ipod classic off of craigslist. The slate grey one. It says "connected eject before disconnecting" on the ipod when I plug it in and nothing shows up in itunes. Every once in a while the "sync" circulating arrows start up, then stop
-
How to add an Icon to a parent menu item in Command Center?
Hi guys, does anybody know how to add an icon to a parent maenu item in Command Center? BTW, I'm using SBO 6.5 Cheers, Oki
-
Populating parts of form based on Value entered in the first field
Hello, I am trying to create a form, where user will enter the serial number of his equipment and I want him to click a verify button next to it.Upon clicking the verify button I want the Item Description field of the form to be updated ( this info i
-
Manual login to Non Default DB with SSO enabled
Hi, I logged the following through SAP Support, but was advised that Single Sign-On was functionining as designed. The issue is that the non-default database does not have a manual login page, whereas the default database does. This is an issue for