Setting canvas display to 16:9

Hi
I've imported 16:9 footage from several sources, no sweat. I'm having difficulty consistently getting the canvas to display 16:9 without black bars above and below the viewing area. After many false starts I thought I had discovered a menu option that just selected 16:9. Now I can't find it. Anyone know how to select canvas display set at 16:9 without the black bars?
Phil

The canvas will display your media based on your sequence settings.
If you are placing 16:9 anamorphic media in a 4:3 timeline, the bars are automatically added.
To change sequence settings:
Menu Bar> Sequence> Settings>General>Anamorphic 16:9
or
Control + 0 (zero) >General> Anamorphic 16:9
Once you change the setting, you may have to load each clip into the VIEWER and change each clips' MOTION TAB>DISTORT setting to ZERO to get it to display correctly.
Otherwise, create a new sequence using the easy preset for the appropriate setting and drop your material into that.
Welcome to the forum. You may want to spend some time reading the manual about matching sequence settings.
good luck.
x

Similar Messages

Tab Canvas displaying Stacked Canvas at runtime disappears?

Hi,
I have 3 canvases that contain the following:
1) Content Canvas -- This contains the TREE item.
2) Tab Canvas -- A tab canvas with a single Tab Page
3) Stacked Canvas -- This is a Stack Canvas with a few
text items on it.
4) Single Window.
======At runtime the following actions occur: ==========
1) The Viewport of the stacked canvas is set to the
Viewport of the Tab Page on the Tab Canvas so that it
looks like the Tab Page has a vertical and horizontal
scrollbar with text items displayed.
2) A text item on the Stacked Canvas is in focus as soon
the as the form window is displayed.
===================Problem is : =====================
1) When I select a Node of the Tree Item, the Tab Canvas
automatically disappears(or becomes invisible) , as a
result the stacked canvas displayed within it at
runtime also becomes invisible. I am left with only
the Tree item being displayed.
=======================================================
PS : I have never experienced this problem with just the
content canvas and the Tab Canvas together.
Any soultion to this problem is most appreciated.
Thanks
Sharath

I am experiencing the exact same thing. The width of the tabs in the layout editor is varied depending on the length of the text. However, at run-time, the width of the tabs is fixed, causing the tabs to be wider than the window and a set of VCR buttons to appear in the upper right corner of the canvas. Personally, I think this is a Forms bug. Why would they intentionally let us set the width to variable at design-time only to force a fixed width at run-time?

Canvas displays stills zoomed in

Browser - stills appear correctly sized in thumbnails,
Timeline - thumbnails appear sized correctly
Viewer - double click on thumbnail in timeline and canvas displays correctly sized still
Canvas - still is zoomed in no matter what size I choose in the dropdown list.
What size will I get when the movie is generated?
Rich

you might want to read up in the manual a bit to help orient yourself to what it is you are looking at.
If your still is high-res, it won't necesarily scale to your frame size, and so it might appear "zoomed in". However, when you open the still from the timeline back into the viewer, it should appear within a frame that matches your sequence.
I usually keep my canvas and viewer set to "fit to window" (shift-Z), or 100%. If you see scrollbars in the canvas you aren't seeing the whole frame, and realtime playback capability can be limited.
Activate one of the wireframe modes in the canvas and select the clip in the timeline. Can you see the whole bounding box and corner handles on the still? If not, zoom out the canvas (apple -) until you can. Grab the corner and resize your still to fit your frame. Unlike Photoshop, or any other program I have ever used, proportions are constrained by default, and holding shift will disable constrained proportions.
a little FCP 101 just for you...
Max Average

How to create a custom layout set to display the KM folders...

Could someone please tell me how to create a custom layout set to display the KM folders?
Thanks,
Sudha.

Hi Sudha,
Please check the following blogs whick will guide you step by step.
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/4123
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/3071
http://help.sap.com/saphelp_nw2004s/helpdata/en/c3/c91b5610b65b4aa8204d09384d156b/frameset.htm
If helps reward points
cheers
dev

Pause / Resume button combination not working when set to display for "rest of project"

Good day,
I have created a set of four objects on slide2 of my project
1. Smart Object rounded rectangle with text "(playing) - CLICK to Pause" [this is the graphic the user sees]
2. Smart Object rounded rectangle with text "(paused) - CLICK to Resume" [this is the graphic the user sees]
3. Smart Object rectangle, transparent, used as button, set to not display in project - btn_Resume
4. Smart Object rectangle, transparent, used as button - btn_Pause
A. Script assigned to btn_Pause hides btn_Pause and the "CLICK to Pause" graphic, shows the btn_Resume and "CLICK to Resume" graphic, and pauses the project by setting the system pause variable to 1
B. Script assigned to btn_Resume hides btn_Resume and the "CLICK to Resume" graphic, shows the btn_Pause and "CLICK to Pause" graphic, and resumes the project by setting the system resume variable to 1
C. All items are set to display from the beginning of slide2 for the "rest of project"
On slide 2, the buttons hide/show and pause/resume behaviors work correctly.
On slide 3, the correct initial button and graphic appears, and the click sound works when clicked, but no behaviors (show/hide/pause) occur until a good amount of time into the slide: you can click all you want for 20-30 seconds, but nothing works except the click sound. Eventually, the behavior will work.
On slides 4 and following, the correct initial button and graphic appears, and the click sound works when clicked, but no behaviors EVER work.
If the behaviors NEVER, EVER worked, I would keep looking for what I did not have set correctly, but the correct working on the slide where they are set, delayed behavior on the next, and no behavior on the remainder of slides following has me stumped.
Captivate version 6.0.1.240
Windows 7 OS
I hope I'm missing something obvious here, and I'm more than willing to face-palm if you tell me . Otherwise, I have not been able to find any setting that makes any difference. I would REALLY rather not duplicate the buttons and scripts on every page of the project. Given the blog posts I have seen saying this method should work just fine, I'm hoping there is a side quirk somewhere that I'm missing.
Thanks for any help you can give.

Without clouding with too much explanation, this technique arose out of a need to deal with (in a different project) objects that were grouped, and wanting to deal with the groups in as simple a way as possible, allow for easy swapping of group assets, and having a few buttons do multiple things. The idea of being able to have multiple interactive buttons stacked on top of each other while appearing for the rest of the project led to trying this simple construct before trying something more complex.
You are correct, that there is a simpler solution, which we ended up using because we were not able to get two interactive buttons stacked on top of each other while displayed for the rest of the project to work properly (although that is SUPPOSED to work, as far as I understand).
Here's what we ended up doing:
A) Two smartshapes used as messaging graphics
B) A single (one) interactive smartshape used as a button
C) A conditional action to pause/resume and show/hide the appropriate messaging graphics
D) All three objects (A&B) stacked, B on top.
E) All objects set to always appear on top, and to display for rest of project.
Our hypothesis, then, is that you are not able to stack interactive objects on top of each other and then display for the rest of the project.
If anyone has evidence to the contrary, we would, gladly, take a look.
Thanks for your interest Lilybiri, and for your input.
Best regards,
Hank

Error While Setting Task Display - 11.1.1.4

Hi,
I have associated an ADF form with a human task. I can see the task, but the ADF screen doesnt show.
java.lang.NullPointerException
at oracle.bpel.services.workflow.client.worklist.util.TaskFlowPropsUtil.
setTaskDisplayInfo(TaskFlowPropsUtil.java:769)
at oracle.bpel.services.workflow.client.worklist.servlet.TaskFlowDeploye
rThread.registerTaskFlowWithTask(TaskFlowDeployerThread.java:261)
at oracle.bpel.services.workflow.client.worklist.servlet.TaskFlowDeploye
rThread.run(TaskFlowDeployerThread.java:129)
at java.lang.Thread.run(Thread.java:619)
<Feb 3, 2011 1:46:24 PM IST> <Warning> <oracle.soa.services.workflow.worklist> <
BEA-000000> <<.> Error while setting task display, this can happen with app load
ing issue, trying to load for 11>
I understand that previous fixes involved setting the adf-config file. I have done this by going into the domain directory... but no joy.
<adf-mds-config xmlns="http://xmlns.oracle.com/adf/mds/config">
<mds-config xmlns="http://xmlns.oracle.com/mds/config">
<persistence-config>
<metadata-namespaces>
<namespace metadata-store-usage="mstore-usage_1" path="/apps"/>
<namespace metadata-store-usage="mstore-usage_1" path="/deployed-composites"/>
<namespace metadata-store-usage="mstore-usage_1" path="/soa"/>
</metadata-namespaces>
<metadata-store-usages>
<metadata-store-usage id="mstore-usage_1">
<metadata-store class-name="oracle.mds.persistence.stores.db.DBMetadataStore">
<property value="DEV_MDS" name="jdbc-userid"/>
<property value="welcome1" name="jdbc-password"/>
<property value="jdbc:oracle:thin:@//localhost:1521/xe" name="jdbc-url"/>
<property value="soa-infra" name="partition-name"/>
</metadata-store>
</metadata-store-usage>
</metadata-store-usages>
</persistence-config>
</mds-config>
</adf-mds-config>
This is 11.1.1.4 Soa Suite.
Thanks and regards.
Anand

I had a similar issue, but it was after my application was automatically converted by JDEV from 1.1.1.3.
Perhaps others have determined how to fix the application and projects after the conversion, but I recreated everything in 1.1.14 and this seems to work.

How to set up display properties for a crosstab is CSS?

I am woundring how to setup css class and code like in this tutorial.
myalerting.css ?
Set up display properties for a crosstab: Design Studio 1.2 - YouTube.
Design Studio 1.2: Set up display properties for a crosstab
if you have sample file please share I am sure other can be befits from as well.
I would like to use color display on numbers or icons in seperate column if the value in certain range or a value is below or avove business needs.
Thanks.

Kevin,
I could not get this to work on my installation; perhaps you can review and "run with it" or someone better with CSS can assist.
The gist of it is there is a class .sapzencrosstab-DataCellDefault.sapzencrosstab-DataCellAlert1Background to define the status symbol for the alerts
Based on your Exceptions in the BEx query, Good 1 is .sapzencrosstab-DataCellDefault.sapzencrosstab-DataCellAlert1Background
Good 2 is .sapzencrosstab-DataCellDefault.sapzencrosstab-DataCellAlert3Background
etc... Bad 3 (red symbol) is .sapzencrosstab-DataCellDefault.sapzencrosstab-DataCellAlert9Background
I tried the following custom CSS on the crosstab, note using IE (which now we can no longer use until Microsoft patches)
myAlerting.sapzencrosstab-DataCellDefault.sapzencrosstab-DataCellAlternating{
background-color:#F9F9F9 !important;
myAlerting.sapzencrosstab-DataCellDefault{
background-color:#FFFFFF !important;
myAlerting.sapzencrosstab-DataCellDefault.sapzencrosstab-DataCellAlert1Background
color:rgba(0,0,0,0.0);
background-image: url('/aad/resources/~1398612272195~/sap/zen/crosstab/themes/sap_platinum/img/exceptions/status_1.gif') !important;
background-repeat:no-repeat !important;
background-position:center top !important;
myAlerting.sapzencrosstab-DataCellDefault.sapzencrosstab-DataCellAlert2Background
color:rgba(0,0,0,0.0);
background-image: url('/aad/resources/~1398612272195~/sap/zen/crosstab/themes/sap_platinum/img/exceptions/status_2.gif') !important;
background-repeat:no-repeat !important;
background-position:center top !important;
myAlerting.sapzencrosstab-DataCellDefault.sapzencrosstab-DataCellAlert3Background
color:rgba(0,0,0,0.0);
background-image:url('green.png');
background-repeat:no-repeat !important;
background-position:center top !important;
myAlerting.sapzencrosstab-DataCellDefault.sapzencrosstab-DataCellAlert9StatusSymbol
color:rgba(0,0,0,0.0);
background-image: url('aad/resources/~1398612272195~/sap/zen/crosstab/themes/sap_platinum/img/exceptions/status_9.gif') !important;
background-repeat:no-repeat !important;
background-position:center top !important;
I didn't want to hold you up and for sure I hope there is someone in the community who could help. I'll try again when we can use IE

How to set the display size of the PDF - in percent?

Hi, I wonder if anyone knows if it is possible to set
the display size of the PDF document, so that it always
shows in, let´s say 100%, in the viewers browser window?
Much grateful for any help!
/Anni

In Acrobat, under Document Properties (Ctrl+D), you can edit the Initial
View settings, including the zoom level.

Setting the display name in a message

Hello for the following code:
String from = "[email protected]";
Message msg = new MimeMessage(session);
msg.setFrom(new InternetAddress(from));
I'd like to set the display name, i.e.
"A Message From Foo"
However I did not see a msg.setDisplayName() method... is there any way to do this?
As a working example, amazon sends an email with a return address of [email protected], but the display name is 'Amazon Payments' which looks a lot nicer for the customer. I'd like to do the same.
Thanks

Solution is:
new InternetAddress(email_address, display_name);

Set One Display as 'Default' on Startup?

I have a Mac Pro 2.66 GHz Dual-Core that I have connected primarily to one external display (22" LCD monitor by Insignia) and two LCD projectors. The projectors are not always plugged in, because the primary use of this computer is in the tech booth of a theatre space, but logistically, we need to have the VGA cords for the projecters plugged into the back of the Mac at all times. I'm having trouble getting the computer to recognize the LCD monitor as the default/master display on startup (both when the projecters are plugged in and when they're not.) Is there a way to set the display settings to always recognize the port that the LCD monitor is plugged in to as a default? When it doesn't, I can't see the login screen on startup.
Thanks for any help you can give!

Login to your administrator account and in the "Arrangement" tab of "Displays" system preference, drag the menu bar to the picture of the 22" display.
Have you tried switching DVI ports on the back of the computer?

Outlook 2010 Signature: Resizes GIF-pictures when you do not have 100% dpi set on display settings

Our automatic signature tool creates signatures for all our employees. The signature works fine until people with non-100% dpi setting on display (e.g. medium 125% or Larger 150% in Control Panel > Display) try to edit their generated
signature and saves. Suddenly the images get resized and blurry, even if it is not displayed as resized when save the updated signature.
It works fine to edit and save if you have display DPI set to 100%.
The company logo is 127x38 pixels, 2,15KB GIF file.
Is this a known bug or something else? I'm not sure its fair to blame the signature-tool as it works okay before the editor has been doing its stuff.
Another strange thing. If I have edited a signature in 125% and saves it. I send an email and the signature logo is blurry. But if I change display DPI to 100% and send another email (logoff and logon first to change dpi) then the logo is fine again.
Seems like the logo is bound to text size

Our company is having this exact same problem. We have Outlook 2010 SP2 and Windows 7 SP1 Enterprise. As the OP we have a signature creation tool that helps us create these HTML signatures dynamically. OP did you ever resolve this issue?
However, in our situation our logo gif image is already 96 DPI. Our HTML signatures work perfectly fine when Windows DPI is set to 100%. But, as soon as you go to 125% or 150% we have problems when saving email drafts and sending emails where the
logo increases in size.
Here is an example of the HTML code for my current signature. Any help on this issue would be appreciated. Is there a way to prevent Outlook from doing this when DPI is increase from default. We have a lot of users that need to increase
the DPI to see their PC better.
<HTML><HEAD><TITLE>GK Signature</TITLE>
<META http-equiv=Content-Type content="text/html; charset=windows-1252">
<META content="MSHTML 6.00.6000.16674" name=GENERATOR></HEAD>
<BODY>
<DIV align=left> </DIV>
<DIV align=left><FONT face="Arial" size="2" color="#002654">Ryan Lewandowski</FONT></DIV>
<DIV align=left><FONT face="Arial" size="2" color="#002654">Senior PC Specialist</FONT></DIV>
<DIV align=left> </DIV>
<DIV align=left><IMG alt="Godfrey & Kahn, S.C." hspace=0 src="http://www.gklaw.com/images/logos/gklogo.gif" align=baseline height=17 width=184 border=0></DIV>
<DIV align=left><FONT face="Arial" size="2" color="#002654">780 North Water Street</FONT></DIV>
<DIV align=left><FONT face="Arial" size="2" color="#002654">Milwaukee, Wisconsin 53202-3590</FONT></DIV>
<DIV align=left><FONT face="Arial" size="1" color="#002654">TEL</FONT><FONT face="Arial" size="2" color="#002654"> • 414.273.3500</FONT></DIV>
<DIV align=left><FONT face="Arial" size="1" color="#002654">DIR</FONT><FONT face="Arial" size="2" color="#002654"> • 414.287.9537</FONT></DIV>
<DIV align=left><FONT face="Arial" size="1" color="#002654">FAX</FONT><FONT face="Arial" size="2" color="#002654"> • 414.273.5198</FONT></DIV>
<DIV align=left><FONT face="Arial" size="1" color="#002654">EMAIL<FONT face="Arial" size="2" color="#002654"> • <A href=mailto:[email protected]>[email protected]</A></FONT></DIV>
<DIV align=left><FONT face="Arial" size="1" color="#002654">WWW</FONT><FONT face="Arial" size="2" color="#002654"> • <A href="http://www.gklaw.com">GKLAW.COM</A></FONT></DIV>
<DIV align=left><FONT face="Webdings" size="4" color="green">P </FONT><FONT face="Arial" size="1" color="green">Please consider the environment before printing this e-mail</FONT></DIV></BODY></HTML>

Can't set Main Display

Hi
I have just connected up my new MacPro. I am using 2 displays - 1 DVI and 1 VGA. The DVI display needs to be my main display but nomatter how I connect them the VGA display ends up as the main display. I have looked in Display System Prefs and for an nVidia pref app (I have the 7300GT) but can't find anything by which to set which display I wany as main.
I'm sure there is a dead obvious answer but I can't find it!
Thanks

Did you go to the Arrangement tab (I think that's what it's called) in the Displays System Preference and drag the menubar item/symbol that's presumeably on your VGA display to your DVI display? This is probably all you need to do.

Setting my display to 96mhz messed my display.

Hi all,
At 96mhz, my start ups show sync over range and I can't see anything. How can I revert my settings back to 70mhz after setting my display to 96mhz?
Thanks
Web dude

Hi-
Try booting to Safe Mode (hold Shift while booting).
Or, try resetting the PRAM (hold commandoption+PR while booting, hold to second chime).

How to set to display rows no. in source program

how to set to display rows no. in source program ?

Hi,
If u r working in 4.5B or older then u ll get it automatically.
If u want to get numbering in 4.7 or ECC u just do this.
Utilities -> settings -> ABAP editor
Then u can select new editor or lod and u can find lot of options there.
Regards,
Subbu

How to set up displaying all jsp-errors in the problems-list?

how can i set up that all jsp-problems and warnings like "some tag does not have an end tag..." are displayed in the problem list?
when i open up a jsp-page in the editor, the warnings are displayed i canÂ´t see them in the problem list. in the older version (m7) these warnings have been displayed by default and i can not find any setting to display this.
any idea?
tnx
Rel

When exactly it stopped displaying in Problems View? Have you installed any other plug-ins to Eclipse?
Try the following steps:
- Quit & relaunch Workshop
- In Problems View, Launch Filters... window
- Click "Restore Defaults" button (make sure JSP problem is checked)
- Click OK
- Does the warnings displayed in Workshop JSP/XML Editor appear in the Problems View?
In case you still face the same problem, please send the following information to [email protected]
* Help > About Workshop > Click on Eclipse icon - Version & build id
* Help > About Workshop > Click on Workshop icon - Version & build id
* Window > Preferences > Java > Installed JREs - the JRE/JDK version
* .log file from <Eclipse Workspsace>.metadata directory
* m7.log.0 from <Workshop_Home_Dir>Workshop\eclipse\plugins\com.m7.nitrox_3.0.0 directory
* <Workshop_Home_Dir>Workshop_InstallLog.log
* If you can remember, the steps exercised (or plug-ins installed) before encountering this behavior

Setting canvas display to 16:9

Similar Messages

Maybe you are looking for