Setting chapter markers

Hi all
Have scoured the fcp help tome, & the forum... I need to set chapter markers for a very long sequence, then export for DVD studio pro..... Have hit "M" twice & got the chapter marker happening, but it wants a duration, bloomin heck do I need to be a mathematician ? PLEASE tell me there is a simple way of working out the duration between chapters, also the "tome" tells me I can't set chapter markers within 1 sec of the beginning, end, or each other. Each other is good, but what about the beginning ? Insert a 1sec slug at the start ?
.... Ignorance isn't always bliss.
Thanks

Hi Steele, Thanks.
Was doing all that.. hit "M" twice, rename the chapter if I want, click "Add Chapter Marker" (DON'T change "<chapter>" which comes up in the comment area), then hit "OK".
Went through the process several times yesterday & the markers were not being exported ! Got up this morning, did EXACTLY the same process, & hey presto its doing it. I figure like me, my computer must have needed a sleep.
Thanks again

Similar Messages

How to set chapter markers in imovie 10

I am looking to set chapter markers at fixed intervals in imovie 10 as well as set custom chapter markers in family videos that I am converting from 8 mm tape. Does anyone know how to do this in imovie version 10.0.6. Thanks

Apple has removed the ability to set chapter markers with iMovie 10.
I use iMovie HD 06 or iMovie 11. (My favorite is iMovie HD 06.) Both are readily available on Amazon as part of iLife 06 or iLife 11. With these versions of iMovie one click will set your chapter markers. These markers are automatically recognized by iDVD.
http://www.amazon.com/Apple-iLife-Mac-DVD-VERSION/dp/B0007LW22G/ref=sr_1_1?ie=UT F8&qid=1424968719&sr=8-1&keywords=iLife+06

Setting Chapter Markers at Specific Times/Scenes

Is it possible to set chapter markers at different time intervals for specific scenes? I have 4 scenes, all different time intervals, that I'd like to mark.

Hi
Not in iDVD
Not in iMovie 08 (but previous versions and I think iM'09)
To do this with iLife'08 one has to export to GarageBand and set Chapters here.
No elegant way at all.
Yours Bengt W

Re-setting chapter markers in DVD SP

I'm working with a timeline from FCP is already encoded with chapter markers and is quite long and I want to avoid encoding again as it is already in my DVD SP project. What I want to know is can I move a chpter marker accuratly and possibly use the arrow keys to nudge it over?
G4 DP 1 GIG G4 laptop 1.25, MBP 2.0 1 GIG Mac OS X (10.4.8)
Jeff

Jeff
In DVD SP there will be some limits on how you can move markers, they will not be frame accurate.
I usually use the key commands to jump back and forth between markers, then use inspector to nudge
You can also try to just export the Final Cut movie with the new marker positions and use that to set the markers in DVD SP then use the previously encoded video
Take a look here for this workaround that is good if markers do not show up and also will do what you need now
http://dvdstepbystep.com/fasttrackover.php

HELP: Setting Chapter Markers in DVDSP - exactly to where the playhead is?

Hi
Can the chapter markers in DVDSP be moved frame by frame? When I try and do this, to keep it exactly where the playhead is it won't let me. I have the Chapter marker window up and put in the exact timecode of say 00:01:34:12, but it will just jump from say 00:01:34:08 to 00:01:34:20 . I just need it to be pretty exact for this one maker due to the music. Any suggestions as to how this can be done in DVDSP? If at all?
I'm trying to get this project out, (i've had major troubles with the dissolve quality exporting from Compressor) and if I can do this all will be ok to get it to my client! Stressing a little as I've been trying to complete this for the last 4 days!
Thanks. Margie

Can the chapter markers in DVDSP be moved frame by frame?
Sorry, that's no possible from inside DVDSP. You can do that in FCP and/or Compressor before encoding your movie. Read the next info that was taken from DVDSP User MAnual:
Placing Chapter Markers Exactly Where You Want Them
Adding markers in Final Cut Pro, Final Cut Express, iMovie, or Compressor offers the
potentially large advantage of allowing you to position them on the exact frame where
you want them to appear.
When adding markers to a track in DVD Studio Pro, you can only place them at GOP
boundaries. This means that you will often not be able to place them exactly where
you want them. When you place the markers with a video editor, the embedded MPEG
encoder automatically forces an I-frame at that position, placing a GOP boundary
exactly at every marker and providing perfect marker placement. Markers placed in
Compressor before using it to encode the video are also perfectly placed.
Hope that helps !
Alberto

How to use chapter markers in imovie

When I make a movie in i-movie with "chapter markers" and then transfer it over to i-tunes to play on my i-pod touch. The titles can be seen on my i-tunes but not on my i-pod touch ver 2, I can see the chapter markers but then are all "Chapter 1, Chapter 2 etc...not what I named them. They can be seen on my original i-pod touch. So what am i doing wrong with how i am making the movie or how I am playing/transfering them.

Apple has removed the ability to set chapter markers with iMovie 10.
I use iMovie HD 06 or iMovie 11. (My favorite is iMovie HD 06.) Both are readily available on Amazon as part of iLife 06 or iLife 11. With these versions of iMovie one click will set your chapter markers. These markers are automatically recognized by iDVD.
http://www.amazon.com/Apple-iLife-Mac-DVD-VERSION/dp/B0007LW22G/ref=sr_1_1?ie=UT F8&qid=1424968719&sr=8-1&keywords=iLife+06

Is there any way to add chapter markers running Mavericks? Is there a reason they have been stripped out the new OSX?

Is there any way to add chapter markers running Mavericks? Is there a reason they have been stripped out the new OSX?

Is there any way to add chapter markers running Mavericks? Is there a reason they have been stripped out the new OSX?
Depending on your choice of workflows, it appears you can still
1) Add chapter marks manually with QT 7 Pro,
2) Add chapter markers graphically using GarageBand,
3) Use a video editor to set chapter markers graphically,
4) Use a DVD conversion/burning app to set specific or add equi-interval chapter markers, or
5) Use a media/device player that adds playback only chapter makers when no chapter track is embedded within the file.
What kind of chapter markers are you referring to here? Mine are not "stripped out" during normal use but can be automatically removed during various conversion workflows.

Chapter markers again

the way i see it: apple cut old ropes with fcpx, and the features the crowd demands the most are re-integrated. like xml and multicam, as we saw recently.
now, apple, hear me: I NEED CHAPTER MARKERS, as i told you in feedback to fcpx already.
i can't sell a music-video to customers without chapters for each song.
i bought compressor 4.0.2, as in the apple store it sais, a new feature is that markers are now chapter markers as default. yes, exported markers from compressor, but not the imported from fcpx. money for nothing.
i tried every suggested workflow, no one works perfect. neither in garage band nor in compressor it is as easy to set markers with frame accurancy as it is in final cut. exporting xml and importing in qt or compressor did not work fine, also.
i really began to like fcpx, as it has some cool new features, but all are worthless for me as long as i can't set chapter markers. i have to use final cut studio again and hope that the next update will bring chapter markers back again.

Why can't you set the chapter markers in Compressor?
Did you see this
http://www.digitalrebellion.com/blog/posts/how_to_export_chapter_markers_from_fi nal_cut_pro_x.html
P.S. You know you can import chapter markers to Compressor from a tabbed text file list that has timecode numbers?
Message was edited by: Tom Wolsky

Positioning chapter Markers

I have a movie created in FotoMagico and it exports directly to IDVD.
I can add chapters but, I wish to position the chapters at a specific point
in the movie vs a specific time.

You can set chapter markers at specific points from iMovie =>iDVD (not sure about photomagico since I don't use it).
http://docs.info.apple.com/article.html?path=iDVD/6.0/en/418.html
http://docs.info.apple.com/article.html?path=iDVD/6.0/en/417.html
http://docs.info.apple.com/article.html?path=iDVD/6.0/en/277.html
Hope this is Helpful.

Chapter Markers for Apple TV movies

After a search, I saw a brief discussion about using Handbrake to set chapter markers for Apple TV.
But is there a way to set chapters with iLife apps or QT Pro? With my home movies, the Apple TV remote button ">>" advances to each scene I captured with the Canon camcorder. At least it's not random, but dvd-style chapters would be nicer.
I realize QT removes chapters from iMovie projects, but I'm wondering if anyone has a workaround.

To create a chapter list in QT Pro:
1. In a text editor or word processor, type your list of chapters and save the document as plain text.
2. Make each item very short (preferably one word but no more than two or three words) and separate each item with a carriage return.
3. In QuickTime Player, choose File > Open File, select the text file, and click Open.
4. Choose File > Export. In the Export pop-up menu, choose "Text to Text." In the Use pop-up menu, choose "Text with Descriptors."
5. Click Options. In the Text Export Settings dialog, select "Show Text, Descriptors, and Time"; select "Show time relative to start of Movie"; and set fractions of seconds to 1/30 (the default is 1/1000).
6. Click OK, then click Save to create a text file with descriptors.
7. Open the exported list in your text editor or word processor, and open the target movie in QuickTime Player.
8. Choose Window > Show Movie Info.
9. In QuickTime Player, drag the playhead on the timeline to find the first point in the movie where you want to begin a new chapter.
10. Use the Right and Left Arrow keys to step forward or backward a frame at a time as needed. Note the current time in the Properties window.
11. In the text file, find the first chapter title and change the timestamp just before that chapter title to the time you noted in the Properties window.
12. The timestamp might now read, for example, [00:01:30.15], meaning that selecting the first chapter title will jump the viewer 1 minute, 30 seconds, and 15 frames into the movie.
13. Repeat steps 9 through 11 until you've identified all the places in the movie that correspond to the chapter divisions and you've entered the proper timestamps in the text file.
14. Change the last timestamp (the one after the last chapter title in the text file) to match the duration of the movie.
15. Save the text file and import it into QuickTime Player.
16. QuickTime creates a new movie with just a text track.
17. Choose Edit > Select All, choose Edit > Copy, and close the movie.
18. Click in the main movie, choose Edit > Select All, then choose Edit > "Add to Movie."
19. QuickTime adds the text track to the movie.
20. Choose Window > Show Movie Properties.
21. In the Properties window, select the video or audio track you want to associate with the chapter track, and click Other Settings.
22. Choose the main video or audio track from the Chapters pop-up menu.
23. If you have a movie with alternate subtitle or sound tracks, you can create multiple chapter lists in different languages and set the appropriate subtitle or sound track as the owner of each chapter list. The chapter list will change to match the selected language.
24. Select the text track, then select "Preload this track" (to make the chapter track load first).
25. Deselect the new text track so that it doesn't display on top of the video.
26. The new track will still function as a chapter track.
27. Save the movie as a self-contained movie.
28. You can now choose a chapter title from the pop-up menu to the right of the timeline.

Newbie Chapter Markers Question

Hi Getting my head round DVD SP.
Now I have several movies imported that were made in FCE (PAL). I didn't set markers in FCE.
I am trying to set Chapter markers in the Track timeline and it is only letting me do ity at the start and end of the movie.
I can see that this is only possible at GOP points but it suggests every 15 frames.
I Am having no joy whatsoever in making chapter markers. I am kind of loath to go back and add them all in in FCE.
Is it because I have background encoding on and they are already encoded and thus fixed?
best
Tommy Banana

tommybanana wrote:
Is encoding in DVD SP bad?
Not bad, just not quite as good as encoding outside of DVD SP where you can have more control over encodes and re-encodes. Encoding in DVD SP will not make the audio AC3, and AC3 audio is one of those things which helps with playback down the road.

Chapter Markers are off from where I set them in FCP HD

I just completed editing a Hip Hop concert with 12 performers. I put chapter markers at the start of each groups performance in FCP HD. When I exported my project I included the chapter markers as well. I used the new iDVD5 to burn the DVD. I DO have DVD Studio Pro but am not effecient with that yet. Anyway, after the long encoding process and burn, I watched the DVD on my set top DVD player.
When I tested out the DVD skipping from one group to the next, it wouldn't go right to the next group! For some reason the markers were coming up 20-30 seconds before the next performance! So you would see the end of the performance you are currently watching before it switched to the next scene or in my case next group.
The Chapter Markers are placed at the very begining of the groups performance so why after I burn the DVD is it putting the markers up to 30 seconds before where I want it?
Should I try to move the markers forward about 20-30 seconds or so? This is annoying because its perfect in FCP HD but its not placing them in the right places in iDVD5. I should be able to skip to each group as if it were a scene in a movie.
Any suggestions?

All your problems are related to not having the Record Keyframes button on (A). If you create a keyframe point for your mask position and then advance a few frames in the timeline and start moving those mask positions, a new keyframe is NOT created. Instead the points for the mask shape, INCLUDING the the keyframed position are re-positioned relative to the amount you moved them.
If you are going to manually set keyframes (not at ALL recommended), then you have to set the keyframe BEFORE you make any changes to the mask.
Andy

The difference between chapter markers and dvd studio pro markers

Does anyone know what is the difference between chapter markers and dvd studio pro markers? I can not find anywhere on Google. Also in the tutorials I have seen, suggesting DVD Studio Pro markers, but it did not mention the chapter markers.
Thanks,

"Adding Chapter and Compression Markers to Your Sequence
Once you have your edited sequence or program finished, you can add markers to the sequence for use on DVD. Markers are reference points you can place within clips or sequences that identify specific frames. There are two kinds of markers you can add that directly relate to authoring a DVD—chapter markers and compression markers.
• Chapter markers allow DVD authoring applications to create a navigable chapter list for your exported QuickTime movie. Chapter markers force MPEG keyframes (known as I-frames) at their location, since the DVD specification requires an I-frame at each chapter point.
• Compression markers identify areas of abrupt change and include two types: those that are automatically inserted by Final Cut Pro at all edit points, and those you manually place in the clip or sequence. Like chapter markers, compression markers force I-frames at their location, although in this case it is for better quality encoding, and they are not used to create a chapter list.
Note: When you export a QuickTime movie, you have an option to export various kinds of markers, including compression, chapter, or DVD Studio Pro markers. *When you choose to export DVD Studio Pro markers, Final Cut Pro actually exports chapter markers and all compression markers.* This includes compression markers you set manually, as well as ones created automatically by Final Cut Pro at edit and transition points."
From the Final Cut Pro User Manual.
So, JS was right the first time

Chapter Markers won't show up on Chapter Menu when trying to burn a DVD.

Help,
Trying to burn an SD DVD disc in FCP X from the Share menu. I've set Orange Chapter Markers with Titles in my project from the timeline and these don't appear when I check the box to use chapter markers for Subtitles in the Destinations box to burn a DVD. I've set a photo in the main menu and it appears with the Title of my Project, but in the Chapter Menu it only shows the default list of Chapter 1, Chapter 2, etc. Shouldn't my Chapters show up on the list after they've been set up on my timeline in the project? Also, I tried burning a disc with my Chapters not showing up on the chapter list and my disc only plays from the Main menu where the picture is inserted. There's a slash line in the Chapter list button stating I can't use that option and I can't play chapters. Trying to get this project out the door before January 20, 2013. Can someone please help?
Thanks,
Dave

Can you post some screen shots? The chapter marker dialog box in the timeline. The DVD menu.
What's playing back the DVD?
Have you tried it without the background image? Build a disk image rather than burn a disc.

How to add chapter markers for each file in a folder?

Hello,
I have several image folders with up to 700 images per. I would like to drag & drop them into the timeline but I want to be able to use the chapter/arrow button on the DVD player remote to scroll through them.....like a videoscrapbook, per se.
Is there a setting that will allow me to drop them into the time line and automatically generate a chapter marker for each image, that will be read on export to DVDSP? Surely, there is something like this built in that I just have not yet found; I cannot believe the only alternative is to manually add 700 chapter markers per folder. And do they always go into the timeline in alphabetical order? Can that be prevented or altered?
Also, doesn't it seem strange there is no single-button option (I'm presuming here, since I have not found one) for adding a chapter marker; the '~' button adds a generic marker but you must 'edit' it and click 'chapter marker' - very time-consuming --- or am I missing something here, too? If so please enlighten me! I've experimented a lot but no luck.
Many thanks!
jf

I thought there was a folder size limitation on DVDSP - these folders have digital family photos on them and they are jam-packed; 600, 700, whatever. And there are several of them. I guess I thought putting them in FCP was the only way to avoid the limitation - if there is one.
I'll try putting them straight into DVDSP and see what happens. Thanks!
jf

Setting chapter markers

Similar Messages

Maybe you are looking for