Setting chassis for scan mode

Hi
I am building project in project explorer and setting chassis NI cRIO 9103 for scan mode. I select scan mode from properties. In order to deploy new settings, I follow instructions ( right click chassis>>deploy settings), but when I right click chassis the only option I could choose from are New, Arrange by, expand all, collapse all, remove from project, rename, help and properties. I dont have deploy. Am I not following instructions or is there anything wrong?
Thanks for help
Best regards

Definitely sounds like some necessary software isn't installed or had an installation problem. Can you reply back with what you have installed?
You should have installed at least
LabVIEW
LabVIEW RT
NI-RIO
and preferably, in that order.
Thanks,
Sebastian

Similar Messages

Set up for scan to email for Laserjet pro 300 MFP M 375nw

I am trying to set up a scan to email on my Laserjet pro 300 MFP M 375 and with my IP for my computer, I get as far as filling out the required forms. All is well until I have to enter a password. It will be rejected. I have forgotten the password I initially used. I would like to know how I can remedy the situation and insert a new password. NO one seems to be able to help with this problem

Greetings , I may be able to help you with renaming your scans. Now, I was not able to find any setting that would automatically increase the scan numbers when using the Scan to Email settings. If you use the Scan to Computer option it will number them the way you are describing; Scan0001, Scan0002, ect... That being said, you are able to manually rename the scan file during the Scan to Email process.When you choose Scan then EmailThen choose you outgoing email profileYou should see a Settings button on the bottom left of the display screenScroll through options and select the one that says FilenameEdit the scan file name using the onscreen keyboard Please let me know if any of these steps resolved your issue, or if there is anything else I can do to help. I look forward to hearing from you! Thanks,

Setting AEBS for Stealth mode? Is it possible??

Hello,
I have a Airport Extreme Base Station and I currently have all the default settings for it. I know that the AEBS has a firewall, but I don't really know how to configure it. When I test it's security level by going to a website and running port scans etc... (I go to www.grc.com) I'm getting responses that the ports are responding but are "closed". Is there a way to set the AEBS to have a stealth setting??
I used to have a SMC Barricade router before I got my mac and the AEBS and when I ran these types of tests before they always came out as stealth on all my ports.
Does anyone out there know how to set this base station to show up as stealth?
Thanks in advance.

Hi,
I've asked this question before, too by going to an Apple Store to ask one of their Geniuses what to do about this problem. The response I got was basically that I didn't know what I was talking about and that I was stupid for asking. Usually the Apple folks are cheerful and happy to help; must have been a bad fruit in the lot.
Past messages on this board (I searched for "stealth") mention a similar stance: don't worry about ping, just make sure your ports are closed and/or services disabled.
The objective of stealth mode is to make sure hackers don't even know we exist so that they won't have reason to port scan our IP in the attempt to hack in. —When I ran a development web server for a while I monitored log files via Console seeing all kinds of external hack attempts!!
What I'm looking for is `stateful packet inspection` with all ports `stealthed`. Better yet, the AEBS needs to provide a configuration wizard for customers both who just want to run it out of the box AND include expert options (i.e. LinkSys, NetGear, D-Link, ...) so that we can fine-tune the firewall to our needs!
The main reason for my reply was to show that others have the same concerns and to solicit a meaningful response from Apple that satisfies this concern.
~Cheers
PS: I've also used grc.com to test my vulnerability from the outside world as well as asking external SysAdmins to port-scan my system.

Setting default for scanned photos

I have a Canon LiDe 90 scanner,...I scan photos and save them as a jpg file, but the default program for all the files are either preview or Photoshop. I'm looking for a way to select all the files and set them to iPhoto. I can do them one at a time, but it's a pain,...Option click the photo, select Info, select program drop down,...then find iPhoto and clcik OK,....takes way too long! - D

The catch is that Preview is a photo viewer, photoshop is a photo editor and iPhoto is a photo organiser - and that's a key difference. You can't set iPhoto as a viewer or editor (though it can do both) because first and foremost it's a database, and as such the data needs to be imported.
So, now the question becomes how to get these pics into iPhoto. Where are they when you try to import? Will dropping them on the iPhoto Window or iPhoto icon on the dock work?
Regards
TD

Set location for offline-mode songs?

In previous versions of Spotify, I had the option to choose where I wanted the offline-synced songs to bo, an option I can't find anymore. Is it possible to change it nowdays?

Hi Gribbled,
Could you please change the SQL Server Service to run under 'LocalSystem' account and restart SQL Server? Then check if the error still occurs. When the SQL Server service account is configured to use the LocalSystem account, the server will automatically
publish the SPN.
Alternatively, to work around this issue, you can manually create the SPN for the SQL Server Service account using the SETSPN tool. For more details, please review this
blog.
Thanks,
Lydia Zhang

Can't set Multiple Pages scan by default

I'm trying to set the default scan mode for Flatbed scanning to Multiple pages by default.
In the one-time settings screen, I can do this by selecting Scan Resolution, then Multiple pages, but this doesn't stick and I have to do it every single time I want to perform a double-sided scan.
Is there any way to get this to happen? If I don't want multiple pages I just press the Done button instead of Ok, and all is good, so I'd rather have this be the default on this particular printer.

I think you'll get the best answer in the LiveCycle Designer forum:
http://forums.adobe.com/community/livecycle/livecycle_modules_and_development_tools/livecy cle_designer_es?view=discussions

Acceptable uris for edit mode in portlets

Hi,
I have been experimenting with setting URIs for edit mode in portlets.
It seems that the only two acceptable types of URI are those in the
portal project and those that point to a file in the filesystem. It
does not seem possible to forward on to a webapp in the same project, or
to an external URL outside of the application.
Is there a way to do this, or is this not possible?
The use case I am trying to implement is for all portlets to use a
generic edit page that is maximised. The page will be populated with
the available values for personalization for the portlet that the
request came from, and on submit, will return to the portlet and persist
changes.
Cheers
Dennis

Dennis said the following on 02/05/2004 08:21 AM:
Hi,
I have been experimenting with setting URIs for edit mode in portlets.
It seems that the only two acceptable types of URI are those in the
portal project and those that point to a file in the filesystem. It I guess you're using JSR168 portlets, with PortletRequestDispatcher to
include some content for a given mode/state. PortletRequestDispatcher
can only be used to include JSPs within the same webapp.
does not seem possible to forward on to a webapp in the same project, or
to an external URL outside of the application.
Is there a way to do this, or is this not possible?This is possible, but you must roll out your own code to include
external content.
The use case I am trying to implement is for all portlets to use a
generic edit page that is maximised. The page will be populated with
the available values for personalization for the portlet that the
request came from, and on submit, will return to the portlet and persist
changes.Why not deploy that JSP in the same webapp so that it can be included?
Subbu

2 IPS 4270 SETUP FOR PROMISCOUS MODE

hi guys,
I have two ips 4270 and i want to set up for promiscous mode, Please help me on how to setup this two device. It is first time for me two set up this devices. Can somebody give me configuration guides on how to start it?
thank you

Here is configuration guide for IPS version 7.0:
http://www.cisco.com/en/US/docs/security/ips/7.0/configuration/guide/idm/idmguide7.html
Hope that helps.

Scan Mode for C-Rio 9074

So I'm using the C-Rio for my research, and I'm trying to program the C-Rio 9074 in scan mode, however, then programming options are not popping up whenever I select the C-Rio from New-> Target and Devices.

Okay, I installed the Real Time module, FPGA module, upgraded labview from 2011 to 2012, and installed the C-rio drivers. However, I still cannot get into scan mode. I included a picture of the error
I thought I configured my network correctly. I step my local area connection 2 with an ip address of 10.0.0.1 and a subnet mask of 255.255.0.0.
Finally, I set the C-rio Ip address to 10.0.0.2 and subnet mask of 255.255.0.0

How can I set default values for Allocate Mode in AO config?

Hi, How can I set default values for allocate mode in AO config. To be specific, in the attached vi, I need to set the Allocate Mode in AO Config to 'Use FIFO Memory (6)' if the value inside my case structure is false and to 'no change (0)' if the value inside the case strusture is true.
Solved!
Go to Solution.
Attachments:
generateWaveformFIFO.vi ‏15 KB

Create two constants for the Allocate Mode input (right click > create > constant). Place one in the true case of the case structure, and place the other one in the false case. Wire them to the same tunnel (border of the case structure), then wire the tunnel to the Allocate Mode terminal of the AO Config. I don't have Traditional DAQ installed, but that should do it.
Misha

Command for: Access Mode for Result Set

Hi
Does anyone know if there is a command for "Access Mode for Result Set".
The default view for my characteristic in my query is "Characteristic Relationships".
I would like to have a command button for the user to be able to change the access mode to "Posted Values"
I have searched through all the commands but was unable to find this command.
OR if it is not available does anyone know the XHTML that I could enter into the web template.
Thanks in advance.
Ian

Hi
Does anyone know if there is a command for "Access Mode for Result Set".
The default view for my characteristic in my query is "Characteristic Relationships".
I would like to have a command button for the user to be able to change the access mode to "Posted Values"
I have searched through all the commands but was unable to find this command.
OR if it is not available does anyone know the XHTML that I could enter into the web template.
Thanks in advance.
Ian

Can the same I/Os be used for both scan mode and fpga mode

Hey guys,
I currently have this project where I want to have the same I/O in both the RT VI and FPGA VI.
(as in use a C series module on the RT VI and FPGA VI concurrently).
For the customer's sake, I want to keep using the scan mode for the ease of programming,
but I want to use the I/Os in the FPGA VI to implement a safe state.
Is this possible? Thanks.

Either scan mode or FPGA interface. You can't use both in one project.
Suggestion
Setup a safe mode project or double the target in one project.

How to set the Data Synchronisation mode for ADF BC component?

Hi All,
How to set the Data Synchronisation mode for ADF BC component
Thanks
Raghavendra

Can you clarify what you mean by the data synchronization mode?
If you mean the Sync Mode, then in 10.1.3 you set this property by:
1. Selecting your DataBindings.cpx file
2. Expanding the "Data Control Usages" section in the structure window
3. Selecting the ADFBC-based data control
4. Setting the "syncMode" property in the property inspector.

HP 8500A Plus does not reconnect to computer after coming out of sleep mode for scanning.

I have my HP 8500A Plus connected via network to my iMac running 10.6.7. Once I "wake up" the printer from sleep mode it does not show connected to the computer for scanning purposes. It has no problems printing after "waking up", just can't scan from the printer menu. Suggestions?
Thanks

Hello dtw9872,
Kindly install Windows 7 service pack 1 and then check.
http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=5842
Best Regards,
Tanuj
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Flash Air III, how do I set it for 802.11N mode?

To whom it may concern: My Flash Air III is a very fine device. However…. My wireless receiver is setup for Wireless Mode: 802.11g with a rate of 48Mbps. Is there a way to set the Flash Air III to transmit in Wireless Mode: 802.11n? I would like to have a faster data rate.

It's really easy because it's mostly already set up... The AF-On button on the back of the camera already starts and stops AF.
To set up true BBF technique, you turn off the AF function at the shutter button. I believe it's Custom Function IV, 1: Opertaion/Others.... where you make button assignments. Navigate to the shutter button icon and press "set" to enter the options for that... change to the center one "metering start" and press "set" again. Done.
Optionally you can swap the function of the AF-On and "*" (AE Lock) buttons, using the same button assignment tool.
Alan Myers
San Jose, Calif., USA
"Walk softly and carry a big lens."
GEAR: 5DII, 7D(x2), 50D(x3), some other cameras, various lenses & accessories
FLICKR & PRINTROOM

Setting chassis for scan mode

Similar Messages

Maybe you are looking for